Problems with Sharepoint 2010 view if group by and collapsed is activated - all items show up within each group!

Hi there,
we have a Sharepoint 2010 Enterprise environment where we use some lists for new feature ideas.
These lists should be grouped by a certain coloums. If we keep the default view with expanded groups, only the items which should be inside a certain group will be displayed (the count is for example 7 and inside the group there are only 7 items).
As there are a lot of groups inside the list we would like to create a new standard view with all groups collapsed. But as soon as we change the view, all groups contain ALL items from the list (what makes it really strange is that the count is still 7 but
a couple of hundred items are inside the group even the ones which should have been filtered by the "group by" settings.
I enclosed two pictures where you can see the difference between "collapsed" and "expanded" view (Group by settings!)
Is this a bug or is there something wrong with our views/installation?
Thanks for any help (by the way: i just installed the CU from April 2012 which didn't make any difference!)
Greetings
Jens
"Collapsed View":
"Expanded View":

Hi ,
I understand that when you create a new standard view with group by BDE ,and all items show up when collapse is activated .I cannot reproduce your issue .This is not a bug .You should try to edit the view in browser multiple times to have a test whether
it is showing correctly now .If this view is still not working ,you can try the workaround below :
Open the Site in SharePoint Designer .
Open the list and create a new view .Make the view as the default view .
Edit the view in Advanced Mode . Click in the xsltlistview web part and Click Sort&Group in the ribbon .
You can add Group by here .After making all the changes ,save and preview the view in browser .
Thanks
Entan Ming
TechNet Community Support

Similar Messages

TS1559 i have problem with my iphone as it is disable and need to get all my data as the phone needs at least 40 years to enable accessing it

I have problem with my iphone as it is disable and need to get all my data as the phone needs at least 40 years to enable accessing it

If you have never connected the phone to iTunes and backed it up or used iCloud to backup your data, it is lost at this point.
The only way to get back into the phone is to restore it.
~Lyssa

Search Problem with SharePoint 2010: Get Internal server error when doing search

Hi,
Am getting Internal server error, corelation id.. when I use the search functionality in SP2010.
I've installed Sharepoint 2010 trial version on windows server 2008 r2 and the database server used is a SQL server 2008 R2.
I got the following messages with ULs viewer for the relative Corelation ID:
Process
Product
Category
Level
Message
w3wp.exe (0x1808)
SharePoint Foundation
Monitoring
High
Leaving Monitored Scope (Search Statistics). Execution Time=404.4175
w3wp.exe (0x1808)
SharePoint Server
General
Medium
Constructed a new async cache named Location Configuration Cache
w3wp.exe (0x1808)
SharePoint Server Search
Administration
High
'SharePoint_SearchApplicationProxy', location cache:
Refreshing location cache
w3wp.exe (0x1808)
SharePoint Server Search
Administration
High
SharePoint_SearchApplicationProxy', location cache: Exception while fetching
location configuration data. StackTrace: Microsoft.SharePoint.SPEndpointAddress
NotFoundException: There are no addresses available for this application.
at Microsoft.SharePoint.SPRoundRobinServiceLoadBalancer.BeginOperation()
at Microsoft.Office.Server.Search.Administration.SearchServiceApplicationProxy.
GetLocationConfigurations(Int64& lastUpdate, Boolean& useCrawlProxy)
at
Microsoft.Office.Server.Search.Administration.LocationConfigurationCollection.
PopulateCollection()
at Microsoft.Office.Server.Search.Administration.
LocationConfigurationCollection.Init()
at Microsoft.Office.Server.Search.
Administration.LocationConfigurationCollection..ctor(SearchServiceApplicationProxy
searchAdmin)
at Microsoft.Office.Server.Search.Administration.LocationCache.
FetchLocationConfigurationData()
w3wp.exe (0x1808)
SharePoint Server Search
Query
Unexpected
CoreResultsWebPart::OnInit: Exception initializing: System.NullReferenceException:
Object reference not set to an instance of an object.
at Microsoft.Office.Server.
Search.WebControls.CoreResultsWebPart.SetPropertiesOnQueryReader()
at
Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.OnInit(EventArgs e)
w3wp.exe (0x1808)
SharePoint Server Search
Query
Exception
Internal server error exception: System.NullReferenceException: Object reference
not set to an instance of an object.
at Microsoft.Office.Server.Search.WebControls
.CoreResultsWebPart.SetPropertiesOnQueryReader()
at Microsoft.Office.Server.
Search.WebControls.CoreResultsWebPart.OnInit(EventArgs e) System.
NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.
SetPropertiesOnQueryReader()
at Microsoft.Office.Server.Search.WebControls.
CoreResultsWebPart.OnInit(EventArgs e)
w3wp.exe (0x1808)
SharePoint Server
Unified Logging Service
Monitorable
Watson bucket parameters: SharePoint Server 2010, ULSException14, 06175311
"sharepoint server search", 0e00129b "14.0.4763.0", 17853a8f "microsoft.
office.server.search", 0e00129a "14.0.4762.0", 4bad937d "sat mar 27 09:11:25
2010", 0000320d "0000320d", 0000002d "0000002d", 4a6d3421 "nullreferenceexception"
, 67316a39 "g1j9"
w3wp.exe (0x1808)
SharePoint Foundation
Monitoring
High
Leaving Monitored Scope (Search Action Links OnInit). Execution Time=395.3955
w3wp.exe (0x1808)
SharePoint Foundation
Monitoring
High
Leaving Monitored Scope (Add WebPart with error#4). Execution Time=527.8118
w3wp.exe (0x1808)
SharePoint Foundation
Monitoring
High
Leaving Monitored Scope (Add WebParts). Execution Time=3601.2636
w3wp.exe (0x1808)
Web Content Management
Publishing
Medium
Caught a thread abort exception in TemplateRedirectionPage.ProcessRequest,
the exception may be expected. stack trace=
at System.Web.UI.Page.
ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean
includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at
System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.SEARCHRESULTS_ASP
X__1518441470.ProcessRequest(HttpContext context)
at Microsoft.SharePoint.
Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext context)
w3wp.exe (0x1808)
SharePoint Foundation
Monitoring
Medium
Leaving Monitored Scope (Request (GET:http://nestestsp:25943/Pages/results.aspx
?k=home%20nesintranet)). Execution Time=3811.6724
Can anybody help me find a solution for this issue.
Thanks

After making sure that all services are up and running, I had to deactive and activate the "SharePoint Server Site Search" web site collection feature. Then the search started working for the time being.
However, it throws the error again after 8 to 9 hours. This has been happening for last couple of weeks. I also came to know from my windows server team that they moved the AD from one place to another. Since then I am having this issue.
The log file has the following error:
CoreResultsWebPart::OnInit: Exception initializing: System.NullReferenceException: Object reference not set to an instance of an object.     at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.SetPropertiesOnQueryReader()
at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.OnInit(EventArgs e)
Internal server error exception: System.NullReferenceException: Object reference not set to an instance of an object.     at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.SetPropertiesOnQueryReader()
at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.OnInit(EventArgs e) System.NullReferenceException: Object reference not set to an instance of an object.     at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.SetPropertiesOnQueryReader()
at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.OnInit(EventArgs e)
Harish Vajja

Unable to see the native mode report 2012 in Chrome with SharePoint 2010

Hi Techies,
We are facing strange issues to make reporting services 2012 native mode work with SharePoint 2010 in Chrome.
We are able to see all the reports in I.E. with SPS but when I open the SharePoint page on which the report is placed then in the chrome then it does not show the report it only show the SPS content.
Any help will be appriciated
Thanks
Swap

Hi Swap,
As per my understanding, I think this issue is caused by the browser. We can add this site as a trusted site in chrome browser to check this issue again. And we can try to run IE in compatibility mode to check the issue again.
Besides, Google Chrome is only supported to view reports in some operating systems in Reporting Services. Please make sure the operating system meets the requirement, and the Google Chrome is the latest publically released version.
Reference:
Planning for Reporting Services and Power View Browser Support
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Problem with Essbase add-in 9.2.1 and office 2010.

Hi all,
we have a problem with Essbase add in 9.2.1 and office 2010.
Every time when a user opens Excel a new (additionally) euntry in the ad-on menue appears.
Indeed what happens is, that the add-in is loaded n-times.
At the first start of excel one time, second two times and so on...
Thtas's very annoying.
Can someone confirm this issue or even better know a workaround.
(A way we have found so far to ease the pain a bit -well only temporary- is to disable the ad-in, close Excel and start it again.
However with every new start of execel the issues begins again.
But that's not a solution you can recommand to the end user.)
Any help is welcome.
Thank you in advance!
Andre

Have a read of the following on Oracle Support - Support for Office 2010 in Essbase Excel Add-In and Smart View [ID 1191235.1]
Cheers
John
http://john-goodwin.blogspot.com/

Problem with Local DCs View in NWDS 7.0

Hi!
I' ve got a problem with Local DCs view in NWDS: None of the standard-DCs (BI_MMR, BI_UDI, CAF a.s.o.) can be expanded and show their content. I already reinstalled IDE, but without success.
Has anybody got an idea?
Thanks a lot in advance!
Regards,
Thomas

Hi,
This is due to some files missed in Local development.
Let me know Are you able to see <b>.confdef, .syncdb</b> and <b>buildvariant.config </b> files under Local Developement.
If you are not able to see, UnInstall your NWDS, Remove Local developement under .dtc folder, then Re-Install NWDS.
Hope this will help you.
Thanks & Regards
Vasundhara

Problem with Local DCs View in NWDS

Hi!
I' ve got a problem with Local DCs view in NWDS: None of the standard-DCs (BI_MMR, BI_UDI, CAF a.s.o.) can be expanded and show their content. I already reinstalled IDE, but without success.
Has anybody got an idea?
Thanks a lot in advance!
Regards,
Thomas

Your setup might be incomplete: The SAR file extraction creates very long paths on your filesystem. If you do not extract to the rootfolder of disk, chances are the paths become too long and the installation exits, without any warning.
If this is not the cause of your problem, check if the .dcdef files for the local DCs (plugin com.sap.tc.ap if I'm correct) were copied during installation.

Problems with a shared calendar using Outlook 2007 and Exchange 2010

Hello all,
We are having a problem with sharing a calendar using Outlook 2007 and Exchange 2010.
I will start with some background. I have just started my position with this company. I have been working with networks for awhile at the small business level. I have not had much production experience with exchange. There is only myself and my supervisor
who has inherited a midsized network which was built by five previous techs that are no longer with the company. Of course, the previous techs did not leave much documentation, so the original hows and whys for our system setup has been lost.
One of the managers has a calendar she shares with some of our users. I believe this calendar has been in use since sometime in 2006. A mailbox was created to hold this calendar to keep it separate from the managers calendar. I am not sure what version
of exchange they were using at that time, but I assume there was one or two migrations of it getting to its current state on our exchange 2010 server. At some point it was observed that the other workers she was sharing with were not able to access it correctly.
I am not fully sure what the original problem was (possibly some people not being able to see or connect to the calendar), but it was decided to give everyone who needed access to this calendar full access permissions through exchange. Correct me if I
am wrong, but I believe that gave everyone connected the ability to do anything with the calendar. Of course the manager was not happy about that. This is where I started working on the problem.
I removed everyone, except the manager who wants to control the calendar, from having "Full Access Permissions". This did have the effect of making some people just able to see the calendar and not make changes. Though there were others that were
able to connect to the calendar who I thought would not be able to. The manager that originally created the calendar did try to manage access to it through the Outlook interface, though it currently does not seem to be fully in effect.
So, to get to the point of what we are trying to do, is there a way to get the original manager back into control of the calendar though Outlook? It would be preferred to be able to keep the history of what they tracked of this calendar, so starting a new
one would be something we would rather avoid. After that, getting all of the users that need to connect to the calendar reconnected with the correct access permissions and making sure they are all synchronized.
I realize this is a big mess, and your help would be greatly appreciated.

Hi Nigel,
How is the impact, just one user or all users, Outlook or OWA?
If just one user, it seems like an issue on the Outlook Client side.
Please trying to re-create new profile to fresh the caches.
Please runing Outlook under safe mode to avoid some AVs, add-ins and firewall.
Found a similar thread for your reference:
Calendar Sharing not available error message
http://social.technet.microsoft.com/Forums/exchange/en-US/d9b33281-d7bb-4608-8025-16fb26643d0d/calendar-sharing-not-available-error-message?forum=exchangesvrclientslegacy
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Problem with pdf chrome viewer and javascript

I have a problem with chrome pdf viewer. We have created a form with acrobat 9 pro, this form contains a javascript. When the form is printed or saved the javascript checks that all the mandatiry fields are completed and displays a message if some fields are uncompleted. The chrome pdf viewer doesn't display the warning message when the form is saved, and doesn't display the check box included in the warning message pop up to confirm that the user accepts to print the form. The control is correct with FF et IE
Thanks for your help

There are many PDF viewers. Adobe's, third party downloads, things that come with systems (Apple Preview, Microsoft 8 Reader), things built into browsers (Chrome, Firefox...) Adobe's software understands the full set of JavaScript. Some ignoresJavaScript altogether. Some do selected JavaScript. This is a bit of a mess, but nothing can be done about it EXCEPT that you can demand your users use Adobe Reader. Whether they actually will depends on how important your needs are to them.

Citrix Netscaler AppXpert with Sharepoint 2010 Page Edit Issue

Posting this as a questions and discussion point.
The issue is in using Citrix Netscaler with AppXpert with SharePoint 2010. I've seen this issue for two customers.
Configurations:
- Citrix Netscaler as the load Balancer
- Netscaler AppXpert for SharePoint deployed on Netscaler (using either AppXpert version 1.1 or 2.0)
- SharePoint 2010 Standard or Enterprise editions
Issue:
A SharePoint user with appropriate rights go to a SharePoint page. They choose Edit page, make changes and want to save changes. At this point all SharePoint ribbon options on the top are greyed out. End result, users are not able to make changes to their
site pages. Issue happens for everyone including Farm Admins.
Cases:
a. The users are able to edit and save SharePoint wiki pages if I point user's PC to the SharePoint web server WFE by changing their local host file.
b. On Citrix Netscaler, if I use the traditional load balancing i.e. without Citrix AppXpert, then the users are able to edit and save the pages. That is an option if the customer is using SharePoint 2010 Standard. That is not an option if a customer is
using InfoPath forms. InfoPath is a feature of SharePoint 2010 Enterprise edition. Citrix AppXpert for SharePoint is needed to make the InfoPath work. Else the users get session errors when they use InfoPath Web forms.
c. The issue happens on almost all combination of OS and browser. XP, vista, Win 7, Win8, Win8.1, IE8, 9, 10, 11 and other browsers like chrome etc as well.
Please share your ideas and suggestions.

Hi Faisal,
As I understand, the issue will be solved when end users directly connect to SharePoint WFE servers. Since the issue is related to third party products, I'd recommend you contact their support engineer for sufficient resource and assistance. For your convenience:
http://discussions.citrix.com/forum/150-support-forums/
Should you need more assistance, let me know. Thanks for the understanding.
Regards,
Rebecca Tu
TechNet Community Support

Issue with connection SSRS reportviewer control to SSRS 2012 integrated with SharePoint 2010...

Hi,
I have a .NET application that uses SSRS ReportViewer 2012 control to render reports deployed on SSRS 2012 integrated with SharePoint 2010. I am getting error "the report execution '' has expired or not found". The same code works when I connect
to SSRS 2008 R2 integrated with SharePoint 2007. I investigated the issue and it seems the JavaScript that pings the SSRS server before it expires is missing from rendered HTML.
Let me know if there is a way to fix this issue.
following is the code:
ASPX:
<formid="form1"runat="server">
<rsweb:ReportViewerAsyncRendering="true"
KeepSessionAlive="true"ID="test"runat="server"></rsweb:ReportViewer>
<asp:scriptmanagerrunat="server"></asp:scriptmanager>
</form>
Code Behind:
if(!IsPostBack)
this.Session.Clear();
        test.Reset();
        test.ProcessingMode =
ProcessingMode.Remote;
        test.KeepSessionAlive =
true;
        test.ServerReport.ReportServerUrl =
newSystem.Uri("https://webappname/_vti_bin/reportserver/");
        test.ServerReport.ReportPath =
https://webappname/RS_Reports/REportEngineTest.rdl;
ReportServerCredentialscred =
newReportServerCredentials();
            test.ServerReport.ReportServerCredentials = cred;
report server credentials:
publicICredentialsNetworkCredentials
get
// Use default identity.
returnnewNetworkCredential("user",
"pwd",
"domain");

What's the meaning of webappname, are you mean the sharepoint site?
I think this issue can be caused by the incorrect url. You can refer to the following link:
http://msdn.microsoft.com/en-us/library/ms154497(v=sql.110).aspx
Familyabc

BI 4.1 SP2 IOMS integration with Sharepoint 2010

I'm trying to configure SAP BI 4.1 SP2 with sharepoint 2010. After installation of BI 4.1 SP2 IOMS with Sharepoint 2010 i get the error message while trying to open a site page on Sharepoint browser.
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: bc9d814d-7f14-407a-9986-b6096f5fc799
Date and Time: 6/25/2014 4:00:54 PM
Any help in configuring BI 4.1 SP2 with sharepoint will be really helpfull.
Thanks in Advance.
Krishna

Please share more details about the error bc9d814d-7f14-407a-9986-b6096f5fc799 from ULS logs
If this helped you resolve your issue, please mark it Answered

Electronic Data Interchange (EDI) software integration with SharePoint 2010

Is possible to integrate EDI (Electronic Data Interchange ) softwares with SharePoint 2010?
Please let me know if anyone has done this? If yes,let me know which EDI software is used?
Marulasiddappa SB (Swamy)

Well I did something similar.... but I received the data, Transformed it XML using BizTalk and Finally from BizTalk I send it to Sharepoint. if you wants a document on how to do it, let me know
Abraham Forchue Frias MCITP:Database Administrator 2008 -- Santo Domingo, Republica Dominicana

EP7.31 integration with Sharepoint 2010

Hi ,
we are integrating EP 7.31 with Sharepoint 2010 server, we can able to see in HTTP header in MYSSO2 ticket cookie,but Sharepoint application can't able to parse the ticket,
Here is the Log :
[Thr 10788]     Initializing SSF Library Version
[Thr 10788]     SAPCRYPTOLIB 5.5.5C pl36 (Jul 3 2013) MT,[aesni],NB
[Thr 10788] Leave function MySapInitialize with rc = 0.
[Thr 10788] Thu Feb 27 07:39:05 2014
[Thr 10788] Ticket is 橁硅䑍杁䅁眹㍢お坙㙷㍚畖䡤牖塙䥏䉁楎塙灎㉙ㅆ䝤汨湢灒㉙う坡甹...
[Thr 10788] DecodeB64Len returns 0. iDecLength=251
[Thr 10788] *** ERROR => Ticket has probably not yet been parsed. [ssoxxext.c   2494]
Thanks,
Balaji

Hi,
No, Project Server 2013 requires SharePoint 2013.
See reference below:
https://technet.microsoft.com/en-us/library/ee683978.aspx
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Yammer Integration with SharePoint 2010

Hello Team
We integrated Yammer with SharePoint 2010 and everything were working properly, since we updated embeded code with latest yammer its not working properly-
http://success.yammer.com/integrations/yammer-embed/
Following issues are occured-
• In the new yammer feed, I couldn’t find a way to add an attachment or photo to the post. This is a vital component to the functionality of the feed
• In the previous version the feed also had tabbed areas to show different Yammer Areas: ‘My Feed’, ‘Private Messages’, ‘Notifications’, and ‘More >’. Is there any way to keep this functionality.
We also wanted to integrate SSO with our FBA SharePoint 2010 site. But could not found any good article so far. Is there any option by which we can do SSO and all above functionlaity.
Thanks Ranveer Katiyar

Hi,
According to your description, my understanding is that when you add the Yammer feeds app to SharePoint page, it occurs "The
page or app using unsupported version of yammer platform" error.
This maybe related to the Yammer API version has been updated, the solution is to update the Yammer app in site contents.
Here is a similiar thread for your reference:
Yammer App for SharePoint – unsupported version
Here is a detailed useful article for your reference:
"This page or app is using an unsupported version of the Yammer platform" error message when you use the Yammer App for SharePoint
If the issue still exists, I suggest you can check the ULS log error message for more detailed information. By default, the ULS log for SharePoint 2010 is located at the path:
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Problems with Sharepoint 2010 view if group by and collapsed is activated - all items show up within each group!

Similar Messages

Maybe you are looking for