Problems with sharing a project from Final cut x

I have just purchased a canon Legria g10 (pal) and when I share(export) the project I get horizontal lines on the image, the raw footage looks fine in quicktime but when I edit and share it back out of Final Cut x it has the lines. Do I need to de-interlace and if so why? will I have to do this everytime I use the camera? or is the problem with settings on the camera? Any help would be greatly appriciated.
thanks in advance

Hi Tom,
thanks for the swift reply. Here are the screengrabs
the exported footage
the original footage
and the propeties of the original footage
and the properties of the exported file

Similar Messages

I need to transfr a project from final cut pro 6

I need to transfr a project from final cut pro 6 to an editor with final cut pro 5.
will they have the problem of not being able to open the file? any suggestions out there?

Welcome to the forum!
FCP project files are NOT backward compatible with older versions. But you can export an XML file of your FCP 6 project, then use the XML file to build a new project in FCP 5. Check the manual for details.
-DH

Transfer clips and projects from final cut pro x trial to final cut pro x

Just bought the final version of Final Cut Pro X and cannot transfer my existing clips and projects from Final Cut Pro X Trial.

RRight-click on your library, select Open With and choose FCP.

How to import project from Final cut pro 7 to X ?

how to import project from Final Cut Pro 7 to X ?

please tell me if FCP 7can create any kind of file that FCP X can read ?
I can read FCP 7 .mov file with QuickTime, but not with FCP X ? what can I do ?
Sould I use a Premiere on PC to make files compatibles in between 2 apple Softwares ?
I have a lot a files that have been created with FCP 7 and I just buy FCP X , so I am Stuck !!!
thank you in advance

How do I export a project from Final Cut Pro onto my desktop?

How do I export a project from Final Cut Pro to my desktop as a movie?

Can anyone please help me.. when I click on my timeline in my project library and try to export movie nothing happens! and when I try to "share" to youtube I get an error message stating that it cannot be exported because it contains "no video"... The 4 minute music video that I've created with shots off my Canon T2i looks and plays great....If I uploaded the videos into Final Cut but did not save them on my desktop or anywhere else on the Mac would this be a reason to get this message? I have never experienced this before...the only option under "share" that works is "email"
[email protected]

Best setting for hd project from final cut

i'm ready to export an HD project from final cut. i want to use compressor to export it and then to import it on DVD Studio Pro and burn it on DVD. what setting should i use when exporting it using compressor?

If you plan to deliver on DVD, use the DVD preset in Compressor that comes closest to matching your program's duration. If you plan to add menus or other extras, take that ito account when determining which preset to use.
Keep in mind that DVD is a STANDARD DEFINITION format only so your HD footage will be scaled down to fit 720x480 (640x480 square pixels). You can make an HD DVD, but that is an obsolete format and will not play in any regular DVD player.
-DH

Exporting an hd project from final cut 7

i just finished editing an hd project on final cut 7. i want to know how to export the hd project and of course for the project to stay in hd?

No. It's just being displayed 1:1 on the computer's screen. That is the actual size. If you look at the Canvas in your copy of FCP, you will see a percentage value representing the current size. Note that it is well below 100%.
QuickTime Player has a View menu whith various preset options or you can simply drag the bottom right corner of the window to resize it.

How to send a project from Final Cut Pro X, to adobe Audition

Anyone familiar with exporting a project or just audio from FCPX to Adobe Audition?

Thanx for your reaction. I want to edit Final Cut soundtracks in Adobe Audition and import them back again in FCPX.
I found out a good workaround.
First export the project as roles in separate files.
You can import these files in Audition; edit them etc.
Simple as that and no extra costs.

Problems with converted .MTS files in Final Cut Express 4

I have a hard drive full of video shot and a consumer grade HD camera in the .MTS format.
After struggling with finding an acceptable converter, I finally bought iSkysoft's Video Converter.
I've been using the converter's output preset of "MP4 Format for Final Cut X" and "High definition MP4 format" settings and they both yield the same results.
Now I am having problems simply editing the footage in FCE4.
I can take the footage and set i/o points in them but when I drag clips into the timeline, it often hangs up, locks up, FCE is unresponsive and it's even crashed.
This is on a 2 x 3.2 GHz Quad-Core Intel Mac running 10.6.8.

In order to use .mts video in Final Cut Express, you need to convert the video to QuickTime/Apple Intermediate Codec before importing into FCE. .mts video files are typically H.264 video, highly compressed and is not something that FCE can edit. Ditto for "MP4 format for FCPX or HighDef MP4 format". If iSkysoft cannot convert to QT/AIC then I suggest Clipwrap
Note: for the future, if your camcorder is an AVCHD camcorder you can directly ingest the video from the camcorder into FCE.

Problems with the new MacBookPro and Final Cut???

Got this from a friend of mine, and wondered if y'all could provide any insights.
Thanks in advance.
Hal
Begin forwarded message:
" ...the water walkers are
discussing the "Steve Givith - Steve Taketh" concerning the new powerbooks.
Along with the hardware downsides: no Firewire 800; only one USB port; the Superdrive has reduced features from the existing one in the IBM processor version; and no internal modem.
On the software side - and the reason for this note, the new "Mac Book" cannot run software that is keyed to the CPU of earlier Mac models. That means that where Apple or the vendor keyed the ability of an application
to run to the G3 or G4 or ALTIVEC engine, that program will no longer
operate in the new Mac Book. (This true?)
Bringing that closer to home:
The current version of Final Cut Studio is not supported on Intel-based
Mac computers with Rosetta. A Universal version of Final Cut Studio,
which will run natively on both PowerPC- and Intel-based Mac computers,
will be available before the end of March 2006. (Will that be backward compatible with the pre Intel Macs?)
Final Cut Express is Not supported on Intel-based Mac computers with
Rosetta.
==> notice that the "universal version" sentence is not found on the
Apple website under Final Cut Express.
Any clues or contacts who can sort this out?"

From the keynote:
Universal Binary versions of the Pro software (Final Cut Pro, etc) will be available by the end of March 2006. It will cost $49 for current owners of the most-recent version of Final Cut Studio to get this Universal version.
Look at this page as well:
http://www.apple.com/finalcutstudio/topquestions.html
"Does Final Cut Studio run on the new Intel-based Mac computers?
The current version of Final Cut Studio is not supported on Intel-based Mac computers with Rosetta. A Universal version of Final Cut Studio, which will run natively on both PowerPC- and Intel-based Mac computers, will be available before the end of March 2006.
If I buy Final Cut Studio today, can I get the Universal version when it’s available?
Yes. All owners of Final Cut Studio can purchase the Universal version for $49."
Re: Final Cut Express... this page confirms what you said about it not being supported on the Intel Macs using Rosetta:
http://www.apple.com/finalcutexpress/specs.html

Export project from final cut pro to Avid

What are my options to create a workflow that implies doing my last trims on Avid (Adrenaline and Nitris?)
My idea is to create almost ended videos on Final cut Pro 5 by myself and expend a last day or two on an Avid Nitris to do the final touches, mixing audio and output the stuff...
the videos are industrial video and small budget commercials that requires more effects that Final Cut can offer me...
THANKS IN ADVANCE

First off, you'll need PRO EXPORT FCP>AVID from www.automaticduck.com.
Then you'll need to recapture all the footage used in the sequence into the Avid, since FCP and Avid capture media differently.
Shane

Problem with loading a project from other system

Hi!
I am tring to load a project that being done on logic with audiowerk card on other computer. I can open the project but when I am choosing a channel and changing the sound-card name to my card (core audio) I can hear the sund but all the plug-ins/instruments disapear allthough i got the plug-ins and most of them are logic built in plug-ins.
What should I need to do in order to keep the plug ins and still be able to play the project from my sound card.
I have logic 7.1,Mac g5 and M-box.
Thanks,
Eshy.

You should have chosen the other option when first launcing it
Convert to CA=yes
Usually this dialogue comes up, sounds like you brought it from an OS 9 system. The Logic plugs should follow through and the VSTs, well, you're kinda stuck there. Ask your client/friend to send the presets for 3rd party VSTs if you have them as AUs. Session interchange between your 2 platforms is not very rewarding, so do it as little as possible.

Can i import a project from final cut express

just bought fcp (couldnt wait for X)...can I import my projects or captured video from FCE ?
thanks

As far as I know you can just open your FCE projects from within FCP. Only once saved, it cannot be opened with FCE any more.
Why not duplicate a FCE project and try to open it with FCP?

Moving Project from Final Cut Pro X Trial to full program

Im currently running a trial copy of FCP X and will likely buy it. Once I've purchased a copy from the app store, does it recognise the trial version and make that a full version or is it a seperate app (as I suspect).
If its the second one as Im guessing it will be, is there an easy way to transfer a project from the trial version into the main app.
Apologies if this sounds like a dumb question, but I need to know the answer

Sorry I've found an answer to this on another post, I did try and search for it but it only appeared when this one was posted!
Can't find a way to delete this, but thanks in advance if you were about to help.

Problems with still frames blurring in Final Cut Express....

I have had problems with still frames blurring. I've discovered it's related to the green line above the time line on the sequence bar. I can't find the name of the bar but it's red if you need rendering. There are green lines and when the scrubber hits the line the frame goes blurry.
I'm guessing it's related to another previous attempt at adding motion to the still. My question, I think, is how to eliminate the green lines to the regular blue?
jb

If there are any colored bars above your video other than the normal grey/light blue then you need to render the sequence out by hitting Option-R.

Problems with sharing a project from Final cut x

Similar Messages

Maybe you are looking for