Problems with sharing files

I am running Windows XP on my desktop, and Vista on my laptop. I had no problems sharing files, then after having to reload Network Magic onto my laptop, I found that I could share files from my desktop to laptop but not from laptop to desktop. All my firewall settings etc. are correct, so I am wondering if there are settings on my laptop that I may have unknowingly changed. I get the error message saying it is a firewall problem. I also get the message saying that my computers can communicate but there is a sharing issue.
This is very frustrating to me as I have no idea what the issue can be, I have set everything I can think of but I still cannot share, any help would be greatly appreciated.............Thanks

have you tried a simple smb.conf without any security stuff to see if it works for you?
[global]
netbios name = Arqon-pc
server string = Samba file and print server
workgroup = MSHOME
security = share
preserve case = no
hosts allow = 127. 192.168.1.
interfaces = 127.0.0.1/8 192.168.1.0/24
remote announce = 192.168.1.255
remote browse sync = 192.168.1.255
change the IPs as required for your network.
after this put your samba shares (such as [Muziek]), and see if others can browse your shares.
if you're using iptables........ are the correct ports open?
Last edited by darkarchon (2008-12-23 17:54:51)

Similar Messages

Permissions problems with Shared files

In my office of two users I have set up file sharing between two Macs, one is is running Snow Leopard 10.6.2 and the other (a PPC machine) is running 10.5.8 (The Leopard Machine was migrated over from a Tiger Machine by doing a fresh install of Leopard and then using Migration Assistant to move the user account off of the Tiger Machine).
Occasionally, I need to send files to the Leopard Mac from my Snow Leopard machine, so I connect to the other Mac's Shared folder, navigate to the Drop Box, and pop the file in.
Looking at the file on the other machine, it comes through as Read Only, ie. if I Get Info on it, it says 'you have custom access' and lists users as Nobody: Read Only; (Unknown): Read Only and Everybody: Read Only. These permission remain like this once the file is copied or moved out of the Drop Box.
I've had a look at the Sharing Prefs on both machines and they are set up to have the admin account as Read and Write and Everyone as Read Only - the Drop box is then set to have the admin account as Read and write and Everyone as Write Only (Drop Box).
The permissions problems happen in either direction, whether copying from machine A to machine B or vice versa.
Can someone help me fix this.
Thanks

Easybourne wrote:
Thanks for the tip. Once the other user vacated their Mac last night I ran the commands but...
Unfortunately, I still seem to be having issues with files being 'read only' on the Leopard machine. If I send a file from the Snow Leopard Mac to the Leopard Mac's drop box, it shows up with what looks like read/write access for 'nobody', 'everyone' and 'unknown user', but if I open the file, work on it and try to save via an app's save dialog, it says the file is Read-only. In the words of t'internet: W T F?
I ran your commands on the Snow Leopard machine too, and curiously, if I send a file from the Leopard machine to the Snow's Drop box, I CAN read and write to the file.
One thing that troubles me is that My User name is now listed TWICE in the list of permissions I get (My User Name): Custom Access and (My User Name) Read/Write. That seems odd.
no, that's normal. this happens because of the ACLs.
Something similar is happening on the Leopard machine too.
I created a fresh user account on my Snow Leopard Machine to see what the default permissions should be and I get other entries in the permissions list that aren't present on either of the two Machine's main user accounts. Users such as 'Staff', for example. Frankly, I'm lost.
I've read somewhere that there could be permissions problems on machines where user accounts have been upgraded from Tiger to Leopard as is the case with one of the machines in question.
yes, that could be. we can fix that if necessary.
I've also read that I can do a complete reset of ACLs by using the Reset Password utility on the Leopard installer DVD. Would this be worth a go, and could it cause more problems if it doesn't work?
yes, you can try resettings ACLs on the leopard machine using the leopard install disk. however, the acl reset utility on the leopard disk is somewhat buggy and sets wrong groups on everything it touches. therefore after you are done with it, reboot normally and run the following terminal command
sudo chown -R `id -un`:`id -gn` ~
you'll have to enter your admin password (which you won't see). that's normal.
If you can bear it, could you please help me some more. Thanks very much.
Message was edited by: Easybourne

Problem with sharing files between mac and pc

hi i have been having an issue with file sharing between my mac and pc. my pc running windows 7 can connect to my two macs running mavericks (mbp and mini) but i cannot connect to the pc from my macs. i have file sharing using smb setup on my macs as well as the workgroup setup. i can see the pc in my finder shared tab but when i enter the username and password it loads like its trying to connect and then says cannot connect or sometimes makes you re enter the password and still nothing. i also tired connecting through finder go tab and connect to server but when i type in my ip it asks to input the user and password but wont accept it it just shakes and deletes the text in the user and pass fields. on my pc i have file sharing enabled and like i said i can access my macs no problem. i will give a quick guide of how i try to connect
Pc name is RAID-PC
my admin account name is RAID
pass is: dapice (not actual)
ip address 192.168.2.20
when I click on the raid pc under the shared tab in finder i put as the user RAID and pass dapice ....doesn't work
under the finder go tab connect to server i put smb://192.168.2.20 then push the + and then connect enter RAID as user and dapice as pass... unsuccessful
i have tired reinstalling windows 7 didn't help i tired installing windows vista and also didn't work
i have reinstalled mavericks and that also didnt work
i have spend HOURS looking for the answer and trying all different this with no success any help will be appreciated

when i go to enter the username and pass it just shakes and makes me re enter
here is some screen shots from what happends
that is for trying to connect through shared tab and thi is through connect to server
after i push connect it shakes and stays the same

HT4103 have a problem with shared file does not exist? used sudo but "no file in directory". i think the problem is from when i tried to move itunes files to an external drive to save space on laptop, cant remember what i actually did!

followed support steps (sudo) to recover itunes sync authorization "permission error" but did not work

i tried both steps but did not help: "disk utility" first aid and iTunes: Missing folder or incorrect permissions may prevent authorization.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Problems with compressing files with right hand click. it does not work.

Problems with compressing files with right hand click.
I am using the compress function in the Mac OS (File > Compress XX) from time to time. Today it does not work anymore. OS 10.5.6
I get a message: The content list cannot be created for compressing.
I tried it with files and folders and keep getting this message. Anybody any idea as to how to fix this

Thanks I love my macbook!!!!
I also got further problems such as copy-paste not working etc.
so I fixed it just this morning by running Applejack 1.5 and am back up running noticing your post.
thanks for helping though!

Problem with Image file

Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
     Button=new JButton(Upload);
     Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
          int returnVal = fc.showOpenDialog(ActionDemo4.this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
          File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
          textArea3.append(aa);
               textArea2.append("Local URL:");
long l=file.length();
          try
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff);
          String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
     urlConn = url.openConnection();
     urlConn.setDoInput (true);
     urlConn.setDoOutput (true);
     urlConn.setUseCaches (false);
     urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
     printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
Bikash

The errors are here:
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ......

Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partition?

Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partitioned Time Capsule? I understand that the Time Machine (software) cannot backup a networked drive (the external) and that Time Capsule (the router/wireless hard drive) does not have its own backup software... so it won't backup the connected drive. What I would like is an alternate solution for having an automated backup of a networked drive. A 2TB Time Capsule has more than enough space for Time Machine backups of my family of Macbooks, so I had hoped to mirror a 500GB external drive (with shared media files) to a portion of the Time Capsule internal hard drive. I assume this would require a partition of the Time Capsule drive. If not, would the sparse file from the various computers being backed up need to be copied to the external drive as part of the RAID1 setup? This seems like overkill for the Time Machine backup, but it would cover the media files.

The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
It isn't possible to partition the TC although you can create a image area.
The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
Read carefully the speed of the USB drive plugged into the TC.

What is the exact problem with this file?

Hi all,
There is an old form , which was not in use from many days.
Now when we tried to run the form, i got the error saying "FRM-40734:Internal Error:Pl/SQL error occured.", in the login form.
When i tried to open the fmb file in Oracle Forms Builder 6i, i got the following error:
FRM-10102: Cannot attach PL/SQL library d2kwutil. This library attachment will be lost if the module is saved., but the fmb file got open.
The login button has the following code:
DECLARE
UNAME VARCHAR2(30);
--USER_ID PARAMLIST;
V_USER APUSERMA.USER_NAME%TYPE;
V_PASSWED APUSERMA.USER_PASSWD%TYPE;
BEGIN
select user_CD INTO :GLOBAL.USER_ID from apuserma
where user_CD = :TI_USER_NAME AND user_PASSWD = :IT_USER_PASSWD
AND SYSDATE BETWEEN USER_VALID_FRM AND USER_VALID_TO;
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
:global.compname := :compname;
compnm(:compname);
--USER_ID := CREATE_PARAMETER_LIST('USER_id_NAME');
call_form('Forms\MAIN_SCREEN',hide,DO_REPLACE);
exception
when no_data_found then
MESSAGE('Incorrect Username or Password. Please Re-Enter');
message(' ');
RAISE FORM_TRIGGER_FAILURE;
END;
EXIT_FORM;
When i tried to compile, i got error saying ,
Error 201 at line 10, column 28
identifier 'WIN_API_ENVIRONMENT.READ_REGISTRY' must be declared.
I am not getting to know What is the exact problem with this file?
Help me with this please.
Thank You.
Oracle forms builder 6i.
Oracle 9i.

Vijetha wrote:
I also want to know what is the use of win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername') ??
What does it do??
If i comment the following line , will it be a problem??
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
Because i commented the above line & compiled, so it is not giving any error now.
So please tell me what win_api_environment.read_registry does??
it's read windows registry value. So, no problem if you comment it.
Thanks

Problem with Receiver File adapter

Hi
I have a problem with receiver file FTP adapter, while writting file in target folder, connection is failing, after retries, it writting file again. How to avoid this situation, is there any way to write the leftout part in the file.
VS

Hi
Thank u all, Problem is solved, i changed write mode to Over write existing file. It is working fine.
VS

Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

Problem with URL File download

Hi every one i am facing a problem with URL File read Technique
import java.awt.Color;
import java.io.DataOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.net.URL;
import java.net.URLConnection;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JProgressBar;
public class JarDownloader
     boolean isSuccess = false;
     public JarDownloader(String url)
          downloadJar(url);
     public boolean isDownloadingSuccess()
          return isSuccess;
     private File deleteExistingFile(String filename)
          File jarf = new File(filename);
          if(jarf.exists())
               jarf.delete();
          return jarf;
     public static void main(String args[]){
          new JarDownloader("url/filename.extension");
     private void downloadJar(String url)
          try
               URL jarurl = new URL(url);
               URLConnection urlc = jarurl.openConnection();
               urlc.setUseCaches(false);
               urlc.setDefaultUseCaches(false);
               InputStream inst = urlc.getInputStream();
               int totlength = urlc.getContentLength();
               System.out.println("Total length "+totlength);
               // If the size is less than 10 kb that means the linkis wrong
               if(totlength<=10*1024)throw new Exception("Wrong Link");
               JFrame jw =new JFrame("Livehelp-Download");
               JPanel jp =new JPanel();
               jp.setLayout(null);
               JLabel jl = new JLabel("Downloading required file(s)...",JLabel.CENTER);
               jl.setBounds(10,10,200,50);
               jp.add(jl);
               JProgressBar jpbar = new JProgressBar(0,totlength);
               jpbar.setBorderPainted(true);
               jpbar.setStringPainted(true);
               jpbar.setBounds(10,70,200,30);
               jpbar.setBackground(Color.BLUE);
               jp.add(jpbar);
               jw.setContentPane(jp);
               jw.pack();
               jw.setResizable(false);
               jw.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
               jw.setLocationRelativeTo(null);
               jw.setSize(220,150);
               jw.setVisible(true);
               int readlngth=0;
               int position=0;
               byte[] readbytes = new byte[totlength];
               while(totlength-position > 0)
                    readlngth = inst.read(readbytes,position,totlength-position);
                    position+=readlngth;
                    jpbar.setValue(position);
               File jarf = deleteExistingFile(filename);
               jarf.createNewFile();
               //FileWriter fwriter=new FileWriter(jarf,true);
               FileOutputStream fout = new FileOutputStream(jarf,true);
               DataOutputStream dout = new DataOutputStream(fout);
               dout.write(readbytes);
               dout.flush();
               dout.close();
               inst.close();
               jw.setVisible(false);
               jw.dispose();
               isSuccess=true;
          }catch(Exception ex)
               isSuccess=false;
}From the above code i received the total length of the PAGE content (i.e here url is a file) when i tried to find the size of that file it return -1.
please help me

I think the real problem is that you don't check the return value from read (it's probably less than data.length indicating an incomplete read). Isn't there a readFully somewhere?

Problem with .sitx files (Safari but not Firefox???)

Hi All,
I have a website online (with help from iWeb and BBEdit) but am having a problem I cant figure out (this IS my first website!)
I am hoping that someone much more knowledgeable than me can help me with it.
I basically have a download section. Icons and desktops.
Now, when I (or anyone else) tries to download- everything seems to be fine in FireFox (even IE!) but not in Safari.
My desktops are compressed as .zip files. No problems there, everyone can download and open (including Safari users!)
My icons are compressed as .sitx files. This is where the problems come in. Firefox and IE download them no problem ('save to disk?' etc) However when one attempts to download the icons (.sitx files) with Safari it simply displays pages of gibberish (starting with the word 'Stuffit') which I am presuming is Safari trying to 'display' the contents of the actual stuffit file.
Why is this? Why wont safari simply download the .sitx files as it does .zip files?
Does Safari have some sort of inherent problem with .sitx files? Is it some sort of configuration within Safari preferences? or (and probably most likely!) is it something I have done wrong?
Oh, my website (page in question!) can be found here:
http://aoimedia.co.uk/news/news.html
Thanks in advance for all your valuable help
Kind regards
John
12 G4 Powerbook/Superdrive. (she's named Skates!) Mac OS X (10.4.4)

Hi,
It sounds like the server the website/file is hosted on is not identifying the type correctly. As you've seen, different browsers will handle this situation differently.
Have a read of this article:
http://www.macosxhints.com/article.php?story=20040211102018600
Hope that helps.

Problems with updating files in the cloud

problems with updating files in the cloud

What kind of problems?
Have you recently upgraded to iCloud Drive on your iOS devices with iOS 8?
Be aware, be careful, be prepared for iCloud Drive | TUAW: Apple news, reviews and how-tos since 2004

Problems with sharing files

Similar Messages

Maybe you are looking for