Problems with sharing in Mac os lion

I can't share my library in Mac os lion

If it happens in a new user you may be able to repair this with the 10.5.4 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
-mj

Similar Messages

Problems with typing in mac os lion

hello,
just two days ago I had some problems with my MacBook Pro running with Lion, I just went to update my mac os 10.7.3 to 10.7.4 and suddenly it failed to instal
just then I was told to restart my computer. Ater I restarted the computer there was a huge problem, I had a Kernel Panic issues and I realized that my mac OS had crashed. So I clean install my mac using my recovery disk that was given in the box by purchase.
after re-installing I got this annoying typing problem (sorry for sharing a Youtube URL to show you exactly how it goes)
http://www.youtube.com/watch?v=LVCwZD3ZEVU
I have tried to turn of the auto correct feature on Text & Languages in system prefrences but it doesnt fix anything.
maybe you have some great solution to fix my problems? thanks before..

If it happens in a new user you may be able to repair this with the 10.5.4 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
-mj

Is anyone else having problems with Office for Mac and Lion?

Since installing Lion 10.7.1 on a macbook pro 2.53 Ghz 4GB 1067 MHz DDR3 I have had no end of problems. Both Excel and Word hang, crash and saving an Excel file is a pain. A 12mb spread sheet just took 4 minutes to save! I have MS Office for Mac 2011 version 14.1.3.
Another problem that may not be related to Office is that opening Finder is so slow and most of the time it takes a minute to display folders in Desktop or Documents.
Any suggestions would be welcome .. I regret installing Lion .. I had no problems with Snow Leopard!

botro wrote:
I'm unable to install the MS Office 14.1.3 update - I keep getting "Installation Failure"
I have not found a solution on this board or Microsoft community
This thread had some things to try.

Problem with sharing fax modem on Lion Server

I have a Zoom USB modem attached to a Mini server running Lion Server. The fax works fine when sent from the server. But when I send a fax to the server (as a shared fax) from my MacBook Pro, the fax shows up on the Server queue with no fax number. Within a second the "Status" changes to "Completed". The fax is not sent. Any ideas?

The server system works so leave that alone.
On your client machine try this. My system sees the Zoom as 'USB Modem @ servername'
Delete the entry for your zoom modem from Printers and Scanners. It probably reads something like USB Modem @ servername.
Add your modem again. Instead of Selecting USB Modem @ servername from the list, choose Add other printer or scanner. In the Add Printer dialog box select USB Modem @ servername. Type a new name in the name box. This time use only letters numbers and dashes. Don't use spaces or special characters. It appears that the spaces or special characters is causing the error. On my computer I entered modem-servername.
If this works for you be sure to enter a defect report at apple.

Problems with connection to the Mountain Lion

Someone is having problems with connection on Mac Mountain Lion? I did a clean install and the connection is unstable.

Have you tried to reset your network settings ?
What I would do is delete the connection, and then retry the set up of that connection.
System Preferences>Network, select Wi-Fi on the left and then click on the 'minus' button

Problems with officejet pro 8100 and Lion?

I just bought a new HP Officejet Pro 8100 Wireless and I have not been able to get it to work correctly. It's hooked up and all the software seems to work but it prints very, very slowly. It takes about 2 minutes to print a color page. Is there some known problem with OJPRO8100s and Macs with OS X Lion on them? I downloaded v12.14.0 of the printer package from HP, uninstalled what came with the printer, and installed the latest and greatest. Didn't make a bit of difference.

Officejet Pro 8500a extremely slow printing with Lion Mac OSX 10.7
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-8500 a-extremely-slow-printing-with-Lion-Mac-OSX-10/td-p/1030521

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

My host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane.

Problem with facetime for mac

hello guy! I've got a problem with facetime for mac.My sister has a I-pod touch fourth generation with factime but i cna't phone her a message come on my mac.It say "xxx can't receive facetime's calls"!Can you help me??

Thanks, Dah•veed.
I did see mention of using Google Public DNS while I was searching the forums prior to posting, but to be honest didn't think it was a DNS-related problem.
However, to rule it out I've set the prefered DNS servers on my router to Google's, but FaceTime still disconnects after 4-5 seconds when calling between me and my brother-in-law. It doesn't matter who initiates the call.
As a test, before I made the changes to my router, I logged into FaceTime as him on my MBP and tried calling myself on my iMac, and that was successful.
The same test between the two iMacs when they were here was unsuccessful, so now I'm definitely thinking it's something on the '08 iMac.
Now I just need to figure out what...

Problem with Twitter for Mac notifications

Hello,
I have a strange problem with Twitter for Mac. On both my home and office Macs. New posts appear in app window but there aren't any notifications even though notifications are set in preferences to show in both dock and menubar. Perhaps anyone noticed similar strange behaviour? I didn't find anything similar on Twitter forums.
Thanks in advance.

Solved by
Dr.AvituvOct 20, 2014 11:09 PM
go to Terminal and post this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/support/lsregister -kill -seed
if it doesn't have that specific directory try this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -seed
once the scanning is done (can be short or long, depends on how heavy your system is) RESTART the computer.
when you're back, go to Apple>system preferences>extensions.... guess who's there.
I hope it helped.
The Doctor.
iMac, OS X Yosemite (10.10)
To restore Actions extensions for good and other stuff
THANKS!

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message?

Will my HP Officejet Pro 8500 Wireless work with the new Mac OS Lion

Will my HP Officejet Pro 8500 Wireless work with the new Mac OS Lion

My experience with upgrading from Snow Leopard to Lion is that the OfficeJet Pro 8500 Wireless will print just fine, although it seems to take a little longer to find the printer on the network. My scan function however locks up and will not work. This really is an annoyance, though, since I have VueScan, which works fine with Lion.
Hopefully, Apple and HP will not orphan the OS native scanning feature for HP multifunction printers.

How to run JavaFX jar with JRE7 on MAC OS Lion 10.7.5 ?

I have created a bundled JavaFX application jar with ANT on Windows 8 O.S. , 64 bit machine. I have JavaFx2.0 and Java 1.7.0_09 installed on my Window O.S.
<target name="CreatingJars" depends="Compiling" description="generate the distribution" >
                    <taskdef resource="com/sun/javafx/tools/ant/antlib.xml"
                             uri="javafx:com.sun.javafx.tools.ant" classpath="${env.JAVA_HOME}/lib/ant-javafx.jar"/>
                          <mkdir dir="${WorkingFolder}/temp/libs"/>
                         <copy todir="${WorkingFolder}/temp/libs">
                         <fileset file="${WorkingFolder}/CustomJars/ProjectLib.jar">
                         </fileset>
                         </copy>
                         <copy todir="${WorkingFolder}/temp/libs">
                         <fileset dir="${WorkingFolder}/libs">
                         </fileset>
                    </copy>
                    <fx:jar destfile="${WorkingFolder}/${app.name}.jar">
                    <fx:application mainClass="${main.class}"/>
                    <fx:resources>
                         <fx:fileset dir="${WorkingFolder}/temp/"/>
                    </fx:resources>
                    <fileset dir="${WorkingFolder}/build"/>
                    <fileset dir="${WorkingFolder}/resources"/>
                    </fx:jar>
     </target> When I am trying to run that JavaFX application jar on MAC OS Lion 10.7.5 using
java -jar application.jar
It always shows a dialog "The application require a newer version of Java Run-time" with download link. Even I have downloaded and successfully installed it on my MAC machine but it still shows me the same window.
java -version is always point to 1.6.
Then I searched for Java Preferences to point the current JRE 1.7 but I could find Java Preferences at Applications -> Utilities -> Java -> Java Preferences.
I would like to know -- how to run JavaFX jar with JRE7 on MAC OS Lion 10.7.5? Is their any other way to run the JavaFX application JAR with JRE7?

Do I need to download the whole JAVA 1.7 on MAC to run the JAR? No
Can not I run the Jar file with Jre7?Yes, you can.
This may be because I have downloaded the JRE 1.7Yep, that's correct, the java_home command only works for jdk's - sorry for the confusion.
For jre7+ versions, only a single Oracle jre version is allowed to be installed on the machine at a time - making a tool like java_home redundant for jre checking.
Weirdly, jre7u10 does not supplant the Apple Java on the command line path by default. If you just type java -v, then the Apple java version will displayed if you have an old Java 6 from Apple and a new Oracle jre7+.
The Oracle jre is always located under (also somewhat strangely):
/Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin/Contents/Home/bin/javaTo test jar launching, I used the willow JavaFX browser pre-release jar available here:
http://code.google.com/p/willow-browser/downloads/detail?name=Willow-0.1-prerelease.jar
Then I launched the jar from the command line using:
/Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin/Contents/Home/bin/java -jar Willow-0.1-prerelease.jar The JavaFX jar ran fine on jre7 with the above machine.
The test machine was running Mac OS X 8 with Oracle jre7u10 installed as well as the Apple Java 6 runtime, but no Oracle jdk7+ installed.

I have problems with office for mac screen resolution, specially with excel

I have problems with office for mac screen resolution, specially with excel ?

For starters, make sure to Check for Updates on any of the Help menus, and make sure the product has all the latest patches. MS did come out with a patch addressing the display issues on Retina Macs. Latest patchlevel is 14.3.2.
We are talking about Office:Mac 2011, right?

TPC 2012 - Problems with shared variable

Hi,
I tried to program simmilar thing to this one http://zone.ni.com/devzone/cda/tut/p/id/5548 on TPC 2012. But it doesn't work.I can see that both programs on my laptop and TPC are working(I've added an additional counter with display), but I cannot see any effect on TPC when I change the value of shared variable on my laptop. I use LabView 8.6 with Touch Panel Module. My question is what are the exact steps to run such application on TPC2012? Are they the same as for TPC 2006?
I've noticed following issues:
1.I cannot deploy the program from Project Manager(there is an information that maybe TPC Service is not started. - I've found such information about TPC Service http://digital.ni.com/public.nsf/allkb/DE177828D27A14A48625734E00768B66 but in fact I cannot find Start » All Programs»National Instruments » NI TPC Service » NI TPC Service Manager 1.0 Does it mean, that the TPC Service is not installed and the programm with shared varibles won't be working or can I start it somehow in another way? Do I need to have TPC service installed on TPC2012?
Until now, I've built the project and sent it through FTP to TPC(the folder was /TEMP) and then started it.
2.Ping works OK
Thank you in advance for any hints how to solve this problem.
Martin

Well no problem, but I'm frustrated with this issue... I've tested many things and nothing. Just to help someone else as I in the future, these are my sources:
http://forums.ni.com/t5/LabVIEW/TPC-2012-Problems-with-shared-variable/m-p/1009631/highlight/false#M...
http://digital.ni.com/public.nsf/allkb/28536DE7E2D9E98B8625770B00738920?OpenDocument
http://zone.ni.com/reference/en-XX/help/372507B-01/lvtpcgsm/tpc_install_sharvar/
http://zone.ni.com/reference/en-XX/help/372507C-01/lvtpcgsm/tpc_install_sharvar/
http://digital.ni.com/public.nsf/allkb/23532363F4905EC28625727A00730B80?OpenDocument
http://forums.ni.com/t5/FieldPoint-Family/TPC-2006-Not-Listed-in-Targets-and-Devices/td-p/566325
http://forums.ni.com/t5/LabVIEW/MAX-can-t-detect-TPC-2106T/td-p/831524
http://zone.ni.com/devzone/cda/tut/p/id/5868
http://digital.ni.com/public.nsf/websearch/28B748B9697B79E18625725A00009066?OpenDocument
http://digital.ni.com/public.nsf/websearch/D1726990DCEB82E4862570F20069C57D?OpenDocument
http://digital.ni.com/public.nsf/allkb/3B469103BBDD4CE48625726000665B36
I hope find some hint..
Fabian León
Certified LabVIEW Associate Developer

Problems with sharing in Mac os lion

Similar Messages

Maybe you are looking for