Problems with site definition in CS5

I am trying to define a new site in DW CS5. When I enter the site information in the dialogue box I get the following message:
The spry assets folder is not inside the site. Please select a valid folder in your local site root.
The program automatically creates a folder for Spry assets but the error message still appears. I tried creating a new folder, but had the same results. I can't get past this screen. Why is this happening?

Randy,
Thanks for your prompt response. The problem is, if I am defining a new site, there are no pre-existing folders. I am calling my site "HF", so Dreamweaver automatically chooses "/Users/Aaron/Documents/HF/SpryAssets" as the default folder for spry assets. If I use the "browse for folder" icon, I can select another folder, but what else would I choose? (I tried choosing other folders, as well as creating a new folder, and neither worked).I'm really stumped!
Aaron
Date: Mon, 7 Jun 2010 09:19:07 -0600
From: [email protected]
To: [email protected]
Subject: Problems with site definition in CS5
I am trying to define a new site in DW CS5. When I enter the site information in the dialogue box I get the following message: The spry assets folder is not inside the site. Please select a valid folder in your local site root.
The program automatically creates a folder for Spry assets but the error message still appears. I tried creating a new folder, but had the same results. I can't get past this screen. Why is this happening?
Yes, it's an annoying bug. In the Site Definition dialog, go to the Advanced > Spry tab and use the "browse for folder" dialog to select your SpryAssets folder and it will fix the path for you.
HTH,
Randy
>

Similar Messages

  • With site definition

    with site definition, when I try to open a file, I have an
    error message as below and it freezes my dw 8.
    "A script in file C:\Program Files|Macromedia|Dreamweaver
    8\Congifurartion\Translators\TranslationManager.js has been running
    for a long time"
    (I run CFMX 6.1 locally and defined the site mapping to CF
    root\wwwroot\applicationname)
    I patched Coldfusion and DW.
    Anyone can help?

    bkochbakke wrote:
    > I'm new to dreamweaver but have worked with WAMP
    architecture a lot. I have a
    > pre-packaged wamp architecture installed (WAMPServer by
    Romain Bourdon). I have
    > set up a virtual host for my site and the site displays
    fine when php includes
    > are used for displaying headers etc. I can't use any of
    the dreamweaver
    > database functions though. When I try I get prompted to
    set up my testing
    > server. I'm certain I have my paths correct -- set to
    the virtual host as
    > follows (where sitename is the name of my site as
    defined in the host config
    > file):
    > Server Model: PHP MySQL
    > Access: Local/Network
    > Testing server folder: C:\vhosts\sitename\
    > URL prefix:
    http://nxa/
    >
    > Any suggestions? I'm totally stumped here -- thinking it
    may have something to
    > do with how the wamp server is configured???
    Whats the url that works at the moment? Is it
    http://nxa/sitename/ or
    just
    http://nxa ?
    Dooza
    Posting Guidelines
    http://www.adobe.com/support/forums/guidelines.html
    How To Ask Smart Questions
    http://www.catb.org/esr/faqs/smart-questions.html

  • Lost site definition in CS5.5

    My IMac crashed and now l the Site Definitions file is lost, I have tried to do a restore from my Time Machine but I am unable to find the Site Definitions Folder
    I have even tried reinstalling Dreamweaver as per the instructions in the Adobe support site after reinstalling DW I am still unable to make a new site, I am getting an error message that tells me that the Sprite Assets folder is not inside the site
    Should I move the Dream Weaver application from the Applications Folder to the Trash and reinstall DW? or what?
    Some help will be appreciated

    Whenever DW starts acting up, the first thing I do is clear the program cache:
    Deleting a corrupted cache file
    If that doesn't take care of it, I move on to restoring preferences:
    http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
    If restoring preferences doesn't clear the issue, the "nuke it from orbit" option would be a fresh re-install using the Cleaner Tool:
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  • Problems with site management

    I have a problem with the site setup dialog box in the Site Management area in CS5.  Only the "Advanced Settings" in the left panel is active.  The other three selections do not not respond when clicked.  My OS is Windows 7.  Is this a known problem and what is the fix?
    Thanks,
    Tony

    It is a new install.  I have re-installed twice and also checked preferences, although I don't know quite what I am looking for (they appear to be OK).  All with no resolution!
    Thanks, Tony

  • Problem with textboxes in Flash CS5

    Hi, I am currently a Flash CS4 user and am trying Flash CS5 currently to see if it is worth it to pay for the upgrade. I currently have a problem with the use of textboxes in CS5 comparing with the previous version. When I try to change the texts of a text box using the following command in actionscript:
    showlmytext.text = "My string: " +String(somevariable);
    I would get weird misaligned text outputted in my textbox, which exact same code did not cause this problem on Flash CS4.
    Can somebody please tell me what is the problem and how can I fix it?
    Thanks

    Hi Mario,
    I hope you are well. My name is Sandi Langlotz.
    At my job at greenidea.com, here in SF; I am having difficulty with using Hebrew in the trial download of CS5 Flash. Russ Mumford my boss has also contacted you regarding our problem.
    Flash has a new TLF (Text Layout Format tool).  My difficulty has to do with text boxes that are formatted for Right to Left text, with Hebrew selected as the Locale. We are pasting from Microsoft Word.
    I hope  that you may have a suggestion, a referral  or a possible work around for me to try.
    I have tried Adobe Customer Service several times to no avail.
    Problem 1.
    The first sentence below, (in blue) is correct format for Hebrew. Hebrew reads from R to Left.
    When I paste the Hebrew text into the Flash animation, one of two things can happen;
    the punctuation is cut off of the left side completely; or it is pasted in to the Right side of the Text box, (at the wrong end of the sentence). 
    I have tried to click the cursor into the left in order to insert the punctuation mark; this works sometimes but often I am unable to click in to manually correct the problem. I don't understand why it is cutting it off, or why I am sometimes unable to click into the left side and insert the punctuation.
    Problem 2
    In the second paste (the 2nd bold sentence),  .CSO on the left side of the sentence is correct, as is the rest of the sentence.
    When I paste the text  into Flash from Word, Flash puts it in as reversed order. the word CSO. has the punctuation switched to the right (CSO.)  Flash reverses the order of the other characters in the sentence also (like in the 2nd black sentence).
    שולחן נקי הוא שולחן מאובטח.
    שולחן נקי הוא שולחן מאובטח
    מבוסס על רעיון ממגזיןCSO .
    .CSOןיזגממ ןויער לע ססובמ
    Adobe says it supports Right to Left text, but I can find no info on these two buggy problems. Do you have any idea what is wrong?
    Thank you ahead of time for any info or referrals you may suggest.
    Sandi Langlotz
    שולחן נקי הוא שולחן מאובטח.
    שולחן נקי הוא שולחן מאובטח
    מבוסס על רעיון ממגזיןCSO .
    .CSOןיזגממ ןויער לע ססובמ

  • Problems with refine edge in CS5-no longer working properly?!

    Hi all, just wondered if anyone has experienced this bizarre problem and if so how they went about fixing it or changin the settings! (i may have done something to photoshop for it not to work properly!!!)
    Basically, i have got CS5 and was very excited to find the refine edge tool.... made cutting out people real easy and loved it.... however, for some reason the refine edge is not working anymore. Everytime i try to refine the edge using the refine edge tool it isnt selecting any fine details of the cut. It seems to be erasing the image with a low opacity making the selection very blurred?!
    Hopefully you can see from the very quickly put together example that the refine edge tool is taking pixels out if her nose, chin, jumper neck and jumper! Any one know how to prevent this from happening?
    Thanks! Matt

    I am having the same problem with the refine edge tool.  It seems to work the exact opposite of what I was expecting.
    The above two images are before and after using the tool to refine the edge.  As you can see from the picture without the mask view, the selection actually got smaller after I tried to add to it.  When I use the other tool to erase an edge, as soon as I release the mouse button, the portion I tried to remove reappears as it was before.  This has never worked properly for me.  Also, I have tried outputting in several different ways.
    As for the questions posed:  The app and OS are up to date.  I am the only user on my computer, so I'm not sure what using another user would accomplish.  I will mention that I'm using Windows 7, not Mac.  I'm really hoping there is a setting I have wrong somewhere.

  • Are there any problems with Lion and Adobe CS5 ?

    I am wanting to upgrade to Lion but don't want to have the hassle of trying to fix any problems as I have heard some people had problems with earlier versions of Adobe Creative Suit and Lion and having recently moved I have no clue where my CS5 keys are so before doing so I want to know there will be no errors.
       Peoples experiences would be appreciated and many thanks.

    I have upgraded two Mac mini's which both have the Adobe Creative Suit Cs5 Acrobat, Illustrator, InDesign and Photoshop. I have had no issues regrding the upgrade, they just work.
    However I do have two user interface issues. InDesign the keyboard page up, page down keys no longer work as expected, they simply jump to the next screen, the workaround is to use a trackpad for the left hand and use two finger scrolling.
    The other is the arrow buttons in the vertical scroll bar no longer exist, so again the trackpad comes in for scrolling.
    This applies for almost all software and the finder.

  • Problem with Skipping Audio in CS5.5

    Hi, I recently opened a file in CS5.5 that I created in 5.03. I have a problem with one audio file. It is a music file mp4a that skips as it plays. All the other files are fine. I deleted the file and replaced it, but that file skips. When i play it in itunes or Windows player, it plays fine. Any suggestions. Thanks Roman

    Thank you for the replies. What was happening is that the other audio files were being onverted by PPPro. This one was not. I moved the file to the desktop and once again placed it into the project. This time the yellow conversion line on the bottom right corner went to work and it works fine. It was some type of glitch with that one file. Thanks again. Roman

  • Problem With Site Access

    Hi guys,
    I've been trying to access the Market Place as well as my account at: www.renderosity.com, but when I click to the Market Place on the link I get the message below (included also is my correspondence with the site's admin). I can access the rest of the site with no seeming problem. And it seems to be only that site that I have been having problems with. I have Java enabled and the block pop-up is unchecked. But it is only with that site that I am having problems with. They have had no reports of any problems from their side. Thanks for any help. Please reply to my other e-mail: [email protected]
    Cheers;-)
    Michael
    404 Not Found
    http://219.235.223.223/forbid.htm
    Not Found
    The requested URL /forbid.htm was not found on this server.
    Apache/1.3.22 Server at WebRoad Port 80
    Hi Michael,
    Do you have javascript enabled? Are you running any security software?
    Karen
    Michael Boatwright wrote:
    Hi Karen,
    I finally managed to get through to the Market Place, but this is how the page looked (See Attached image). Any ideas? I still cannot get into my account though.
    Hi Michael,
    I've never seen that url before which is why I got confused.
    Try this one and let me know if you have problems.
    http://market.renderosity.com/
    Regards,
    Debbie Montique
    MarketPlace Manager
    Michael Boatwright wrote:
    Hi Deb,
    and thanks for the quick reply. That URL is what shows up when I click on the Market Place Home. Maybe it's just temporary. I certainly hope so! I've never had this problem before. I guess time will tell. Thanks again.
    Cheers,
    Michael
    Hi Michael,
    We're not aware of any problem on the site. Can you please give me the exact URL that you are trying to access?
    Additionally, it may be helpful if you log out of Renderosity, empty your cookies and cache on your browser, and then sign back in and see if that resolves the problem.
    Kind regards,
    Karen Janes
    Renderosity Admin Team
    Michael Boatwright wrote:
    Hi guys,
    I have never had problems before with access to any part of Rendo and even now I can access parts of your site, but I can neither access my account nor the market place. Is there something going on from your end? Here is the message that I'm getting when I try to get to those parts of the site that I just mentioned:

    Hi Ayesh,
    Per my test, it seems that the Site Collection Access is only available for the local group of that site collection which is used to store the site collection local term sets.
    To make the site collection local group available, please refer to the steps in the link below:
    http://www.dotnetsharepoint.com/2013/10/how-to-get-site-collection-local-term.html#.U-PVOvmSyd5
    After that, you will see the Site Collection Access when you click the group in Term Store Management.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Problem with site-to-site connection

    Guys,
    I have a problem with establishing site-to-site vpn connection between my 2911 and remote router.
    I have different site-to-site vpn on second WAN interface and it works like a charm. I performed same steps in order to configure new VPN to different location, on first WAN interface, and I am not able to connect two locations.
    I've enabled debug and this is what I get:
    *Feb 13 13:23:51.221: IPSEC(key_engine): got a queue event with 1 KMI message(s)*Feb 13 13:23:51.221: IPSEC(key_engine_delete_sas): rec'd delete notify from ISAKMP*Feb 13 13:23:51.221: IPSEC(key_engine_delete_sas): delete SA with spi 0x6B76A5F1 proto 50 for xxx_remote_IP_xxx*Feb 13 13:23:51.221:  ISAKMP: Failed to find peer index node to update peer_info_list*Feb 13 13:23:51.221: IPSEC(update_current_outbound_sa): updated peer xxx_remote_IP_xxx current outbound sa to SPI 0*Feb 13 13:23:51.221: IPSEC(delete_sa): deleting SA,  (sa) sa_dest= xxx_my_WAN_IP_xxx, sa_proto= 50,     sa_spi= 0x8901AFF3(2298589171),     sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 2603    sa_lifetime(k/sec)= (4608000/3600),  (identity) local= xxx_my_WAN_IP_xxx:0, remote= xxx_remote_IP_xxx:0,    local_proxy= 10.0.0.0/255.255.254.0/256/0,    remote_proxy= 192.168.220.0/255.255.255.0/256/0*Feb 13 13:23:51.221: IPSEC(update_current_outbound_sa): updated peer xxx_remote_IP_xxx current outbound sa to SPI 0*Feb 13 13:23:51.221: IPSEC(delete_sa): deleting SA,  (sa) sa_dest= xxx_remote_IP_xxx, sa_proto= 50,     sa_spi= 0x6B76A5F1(1802937841),     sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 2604    sa_lifetime(k/sec)= (4608000/3600),  (identity) local= xxx_my_WAN_IP_xxx:0, remote= xxx_remote_IP_xxx:0,    local_proxy= 10.0.0.0/255.255.254.0/256/0,    remote_proxy= 192.168.220.0/255.255.255.0/256/0*Feb 13 13:24:00.289: ISAKMP (1224): received packet from xxx_remote_IP_xxx dport 500 sport 500 Global (R) QM_IDLE      *Feb 13 13:24:00.289: ISAKMP: set new node -556398406 to QM_IDLE      *Feb 13 13:24:00.289: ISAKMP:(1224): processing HASH payload. message ID = 3738568890*Feb 13 13:24:00.289: ISAKMP:(1224): processing SA payload. message ID = 3738568890*Feb 13 13:24:00.289: ISAKMP:(1224):Checking IPSec proposal 0*Feb 13 13:24:00.289: ISAKMP: transform 0, ESP_3DES*Feb 13 13:24:00.289: ISAKMP:   attributes in transform:*Feb 13 13:24:00.289: ISAKMP:      encaps is 1 (Tunnel)*Feb 13 13:24:00.289: ISAKMP:      SA life type in seconds*Feb 13 13:24:00.289: ISAKMP:      SA life duration (basic) of 28800*Feb 13 13:24:00.289: ISAKMP:      authenticator is HMAC-MD5*Feb 13 13:24:00.289: ISAKMP:(1224):atts are acceptable.*Feb 13 13:24:00.289: IPSEC(validate_proposal_request): proposal part #1*Feb 13 13:24:00.289: IPSEC(validate_proposal_request): proposal part #1,  (key eng. msg.) INBOUND local= xxx_my_WAN_IP_xxx:0, remote= xxx_remote_IP_xxx:0,    local_proxy= 10.0.0.0/255.255.254.0/256/0,    remote_proxy= 192.168.220.0/255.255.255.0/256/0,    protocol= ESP, transform= NONE  (Tunnel),     lifedur= 0s and 0kb,     spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x0*Feb 13 13:24:00.289: Crypto mapdb : proxy_match        src addr     : 10.0.0.0        dst addr     : 192.168.220.0        protocol     : 0        src port     : 0        dst port     : 0*Feb 13 13:24:00.289: ISAKMP:(1224): processing NONCE payload. message ID = 3738568890*Feb 13 13:24:00.289: ISAKMP:(1224): processing ID payload. message ID = 3738568890*Feb 13 13:24:00.289: ISAKMP:(1224): processing ID payload. message ID = 3738568890*Feb 13 13:24:00.289: ISAKMP:(1224):QM Responder gets spi*Feb 13 13:24:00.289: ISAKMP:(1224):Node 3738568890, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH*Feb 13 13:24:00.289: ISAKMP:(1224):Old State = IKE_QM_READY  New State = IKE_QM_SPI_STARVE*Feb 13 13:24:00.289: ISAKMP:(1224):Node 3738568890, Input = IKE_MESG_INTERNAL, IKE_GOT_SPI*Feb 13 13:24:00.289: ISAKMP:(1224):Old State = IKE_QM_SPI_STARVE  New State = IKE_QM_IPSEC_INSTALL_AWAIT*Feb 13 13:24:00.289: IPSEC(key_engine): got a queue event with 1 KMI message(s)*Feb 13 13:24:00.289: Crypto mapdb : proxy_match        src addr     : 10.0.0.0        dst addr     : 192.168.220.0        protocol     : 256        src port     : 0        dst port     : 0*Feb 13 13:24:00.289: IPSEC(crypto_ipsec_create_ipsec_sas): Map found 1stCentral-map*Feb 13 13:24:00.289: IPSEC(create_sa): sa created,  (sa) sa_dest= xxx_my_WAN_IP_xxx, sa_proto= 50,     sa_spi= 0xFA7FC4AF(4202677423),     sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 2605    sa_lifetime(k/sec)= (4608000/3600)*Feb 13 13:24:00.289: IPSEC(create_sa): sa created,  (sa) sa_dest= xxx_remote_IP_xxx, sa_proto= 50,     sa_spi= 0x6D266D67(1831234919),     sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 2606    sa_lifetime(k/sec)= (4608000/3600)*Feb 13 13:24:00.293:  ISAKMP: Failed to find peer index node to update peer_info_list*Feb 13 13:24:00.293: ISAKMP:(1224):Received IPSec Install callback... proceeding with the negotiation*Feb 13 13:24:00.297: ISAKMP:(1224): sending packet to xxx_remote_IP_xxx my_port 500 peer_port 500 (R) QM_IDLE      *Feb 13 13:24:00.297: ISAKMP:(1224):Sending an IKE IPv4 Packet.*Feb 13 13:24:00.297: ISAKMP:(1224):Node 3738568890, Input = IKE_MESG_FROM_IPSEC, IPSEC_INSTALL_DONE*Feb 13 13:24:00.297: ISAKMP:(1224):Old State = IKE_QM_IPSEC_INSTALL_AWAIT  New State = IKE_QM_R_QM2*Feb 13 13:24:10.053: ISAKMP (1224): received packet from xxx_remote_IP_xxx dport 500 sport 500 Global (R) QM_IDLE      *Feb 13 13:24:10.053: ISAKMP:(1224): phase 2 packet is a duplicate of a previous packet.*Feb 13 13:24:10.053: ISAKMP:(1224): retransmitting due to retransmit phase 2*Feb 13 13:24:10.053: ISAKMP:(1224): retransmitting phase 2 QM_IDLE       -556398406 ...*Feb 13 13:24:10.553: ISAKMP:(1224): retransmitting phase 2 QM_IDLE       -556398406 ...*Feb 13 13:24:10.553: ISAKMP (1224): incrementing error counter on node, attempt 1 of 5: retransmit phase 2*Feb 13 13:24:10.553: ISAKMP (1224): incrementing error counter on sa, attempt 1 of 5: retransmit phase 2*Feb 13 13:24:10.553: ISAKMP:(1224): retransmitting phase 2 -556398406 QM_IDLE      *Feb 13 13:24:10.553: ISAKMP:(1224): sending packet to xxx_remote_IP_xxx my_port 500 peer_port 500 (R) QM_IDLE      *Feb 13 13:24:10.553: ISAKMP:(1224):Sending an IKE IPv4 Packet.*Feb 13 13:24:20.553: ISAKMP:(1224): retransmitting phase 2 QM_IDLE       -556398406 ...*Feb 13 13:24:20.553: ISAKMP (1224): incrementing error counter on node, attempt 2 of 5: retransmit phase 2*Feb 13 13:24:20.553: ISAKMP (1224): incrementing error counter on sa, attempt 2 of 5: retransmit phase 2*Feb 13 13:24:20.553: ISAKMP:(1224): retransmitting phase 2 -556398406 QM_IDLE      *Feb 13 13:24:20.553: ISAKMP:(1224): sending packet to xxx_remote_IP_xxx my_port 500 peer_port 500 (R) QM_IDLE      *Feb 13 13:24:20.553: ISAKMP:(1224):Sending an IKE IPv4 Packet.*Feb 13 13:24:29.997: ISAKMP (1224): received packet from xxx_remote_IP_xxx dport 500 sport 500 Global (R) QM_IDLE      *Feb 13 13:24:29.997: ISAKMP:(1224): phase 2 packet is a duplicate of a previous packet.*Feb 13 13:24:29.997: ISAKMP:(1224): retransmitting due to retransmit phase 2*Feb 13 13:24:29.997: ISAKMP:(1224): retransmitting phase 2 QM_IDLE       -556398406 ...*Feb 13 13:24:30.497: ISAKMP:(1224): retransmitting phase 2 QM_IDLE       -556398406 ...*Feb 13 13:24:30.497: ISAKMP (1224): incrementing error counter on node, attempt 3 of 5: retransmit phase 2*Feb 13 13:24:30.497: ISAKMP (1224): incrementing error counter on sa, attempt 3 of 5: retransmit phase 2*Feb 13 13:24:30.497: ISAKMP:(1224): retransmitting phase 2 -556398406 QM_IDLE      *Feb 13 13:24:30.497: ISAKMP:(1224): sending packet to xxx_remote_IP_xxx my_port 500 peer_port 500 (R) QM_IDLE      *Feb 13 13:24:30.497: ISAKMP:(1224):Sending an IKE IPv4 Packet.*Feb 13 13:24:31.725: %SYS-5-CONFIG_I: Configured from console by gyadmin on vty0 (10.0.1.12)*Feb 13 13:24:40.497: ISAKMP:(1224): retransmitting phase 2 QM_IDLE       -556398406 ...*Feb 13 13:24:40.497: ISAKMP (1224): incrementing error counter on node, attempt 4 of 5: retransmit phase 2*Feb 13 13:24:40.497: ISAKMP (1224): incrementing error counter on sa, attempt 4 of 5: retransmit phase 2*Feb 13 13:24:40.497: ISAKMP:(1224): retransmitting phase 2 -556398406 QM_IDLE      *Feb 13 13:24:40.497: ISAKMP:(1224): sending packet to xxx_remote_IP_xxx my_port 500 peer_port 500 (R) QM_IDLE      *Feb 13 13:24:40.497: ISAKMP:(1224):Sending an IKE IPv4 Packet.*Feb 13 13:24:41.221: ISAKMP:(1224):purging node -932969703*Feb 13 13:24:50.497: ISAKMP:(1224): retransmitting phase 2 QM_IDLE       -556398406 ...*Feb 13 13:24:50.497: ISAKMP (1224): incrementing error counter on node, attempt 5 of 5: retransmit phase 2*Feb 13 13:24:50.497: ISAKMP (1224): incrementing error counter on sa, attempt 5 of 5: retransmit phase 2*Feb 13 13:24:50.497: ISAKMP:(1224): retransmitting phase 2 -556398406 QM_IDLE      *Feb 13 13:24:50.497: ISAKMP:(1224): sending packet to xxx_remote_IP_xxx my_port 500 peer_port 500 (R) QM_IDLE      *Feb 13 13:24:50.497: ISAKMP:(1224):Sending an IKE IPv4 Packet.*Feb 13 13:25:00.497: ISAKMP:(1224): retransmitting phase 2 QM_IDLE       -556398406 ...*Feb 13 13:25:00.497: ISAKMP:(1224):deleting node -556398406 error TRUE reason "Phase 2 err count exceeded"*Feb 13 13:25:00.497: ISAKMP:(1224):peer does not do paranoid keepalives.
    Any ideas what is the cause? I must add, that right now I do not have access to remote router.
    Thank you in advance for any help.

    I finally figured out, that problem was with defaulr gateway on my router. Case closed.

  • Problem in site definition

    I have created a template for my site.So,I created new pages from this temlpate.Eventhough i did it,there is a msg pops up above as "Dynamically-related files cannot be discovered because there is no site definition for this document".What could i do?

    #1 Define your testing server folder.  See screenshot.  Your set-up will be xamp\htdocs.  That's where your local site folder should be too.
    #2 Advanced button > Testing Server: PHP  MySql.  Save
    #3 Final Screen
    Nancy O.

  • Problem with Exporting from Bridge CS5 to Social Media sites

    Hi Adobe users,
    I'm a new French user of CS5 Bridge. My question is :
    Is it possible for me to export pictures from Bridge to Social Media Sites like Facebook & Flickr ?
    This topic (http://www.tipsquirrel.com/exporting-from-bridge-cs5-to-social-media-sites/) introduce me to exporting files but I haven't got the modules who were necessary for exporting. After, I do a Check For Update, without results. So I have another question :
    What are the steps in order to have the necessary modules ?
    Thanks Julien BARREAU
    Sorry for my bad english.

    You can't. The export module (btw gone in Bridge CC) has never worked properly for all social media. The reason they gave was due to rights management in different countries. It only worked in a few countries for Facebook.

  • Problem with Sound in AE CS5

    When previewing or rendering in AE, the sound is sped up giving it a high pitch like the chipmunks, this is especially irritating right now because I am animating based on sound. It is obviously too fast and what ever file type I use MP3, WAV, AIFF the results are the same... I even tried changing the sample rate between the rage of 16 - 48 Hz. MOVs and AVIs did not help either.
    I notice that there were people with similar problems but no one found an answer.
    Currently I am timing my animation in soundbooth and that is not very productive.
    My PC is a 64bit Win 7 on an intel i7 with 8GB of memory.
    Please Help
    Thanks in advance

    Yes, all seems to be in order according to the project window.
    44,100 kHz @ 24bit in Stereo, 28 sec with some frames.
    I am working in default PAL DV (25fps) widescreen square pixel and using the motherboard soundcard.
    Project Settings:
    -audio settings; sample rate @ 48 kHz (I played with this too, did not help either)
    Preferences:
    -Audio Hardware; After Effects WMD sound (no other available option), Settings all on, buffer size big or small makes no difference
    -Audio Output Mapping; After Effects WMD sound (no other available option), Left/Right: Speakers (realtek high definition audio 1/2)

  • Problem with smart guides in CS5 with converting type object to outlines.

    Hi There,
    I recently upgraded to Illustrator CS5, and am having some issues with the smart guides.  I create some type with the text tool, then convert that type object to outlines.  Now, when I want another graphical object to "snap" to any of the anchors of the outlined text graphic, the smart guides don't kick in!  The problem does not seem to occurr if I make a standard graphic with other tools, only when I create a graphic from a type object.  I need to be able to snap to graphical objects that are created via the convert type to outlines command.  Has anybody experienced this issue before?  It's kinda frustrating.
    The issue didn't seem to happen in CS3, and I've noticed the design of the smart guides is a bit different in the CS5 version as well.  Am I missing something?
    Any tips would be greatly appreciated.  Thanks!

    When you switched to CS5 did you turn on view >> snap to Point
    If your snapping tolernace is set to a small value, you may need to zoom in more to get snapping to work, or just increase the value. Also make sure you have the appropriate items checked (eg:Anchor Path Labels)
    Edit Preferences >> Smart Guides >> Snapping Tolerance

  • Problems with site displaying in different browsers

    Hi,
    I have made this site in dreamweaver CS3 using one of the default templates when you make a new documents. On Safari and Firefox (and I think on recent IE browsers as well) it looks fine, however on IE6 and IE7 it messes up completely, and the content in the middle frame is pushed right down to the bottom of the page. You can view the site here: http://www.flat29.com/ (and check the source code there too)
    I have tried a number of different things to fix the problem, but I have no idea what is causing the issue, so its difficult to troubleshoot! Any help with this would be massively appriciated!
    Thanks
    Dan

    Unfortunately you have paid the penalty for using one of the templates which ships with Dreamweaver. They are amongst the most awfully constructed pieces of shite I have ever come across. They are not written for the novice to understand but by some twatt that has their head up their arse.
    Now I'm going to give you a few simple steps (which Adobe should have f_cking done before they released these pieces of crap) which will provide a stable approach.
    Step 1) Move your 'mainContent' <div> to directly after the end of your sidebar1 </div>. You can do this by selecting the 'mainContent' <div> tag at the bottom of Dreamweaver design view then switching to code view where you will see all of its code selected. Cut the code.
    Step 2) Go back into Dreamweaver design view and next select the 'sidebar1' <div> tag along the bottom of the window. Now switch back to code view and scroll down the page until you come to the end of the highlighted section of code i.e. (the end of the sidebar1 <div>)
    Step 3) Place your mouse cursor right after the closing </div> tag of the 'sidebar1' <div> and paste back in the 'mainContent' <div>.
    Step 4) Amend the css in your css style sheet for the 'mainContent' css selector to as below:
    .thrColFixHdr #mainContent {
    float: left;
    margin-left: 14px;
    display: inline;
      background-color: #000000;
    width: 404px;
    Thats it!
    Don't worry about IE6 no-one much uses that anymore.

Maybe you are looking for