Problems with Slide Video, when returning to a slide

Hello all!
I have a weird problem with my Captivate presenation, I wonder if anyone could help me...
I have Captivate training course that I've made (output to Flash to run on a SCORM-compliant system).  It has a table of contents which points to different "lesson" screens with videos.
All videos are of type "slide video", they will be launched from the LMS running the course. 
When I click on the slide to play the video the first time, it plays just fine. But if I go back to it later, it acts erratically (plays from middle of video, starts looping weirdly, etc).
Has anyone else seen this?  Wanted to know what I could do to fix.
Thanks!
Daniel

To better illustrate, I've created a simple project with a menu slide and a slide video slide - a really over-simplified version of what I'm trying to do, but still has the same problem. The project is online to download at:
http://ge.tt/8TqfXEA?c
If anyone has time, here is how to recreate the difficulty I'm experiencing:
Run the project (either preview or export SWF, either way is fine)
From the first slide (menu), click on the button, which will go to the next slide and play the video
After the video finishes, click on the "Return to Menu" button
Once back at the menu, click the button to play the next slide & video again. You'll notice that playback is erratic (starts later in the video, also begins weirdly looping).
Please let me know how I can rectify - it's a really big problem. If I'm doing something stupid, please let me know (although I don't think I am - it's a really minimal project setup).
Thanks again for any help anyone can provide!!!

Similar Messages

  • Problem with previewing video when capturing

    I recently had to reinstall FCP onto my Powerbook and since doing this the following problem has occured:
    When I open the log and capture window the program recognises my DV deck and plays the footage fine. However, when I start to capture the footage, the video preview is disabled - it freezes on the 1st frame. The video is capturing fine and when I check the audio preview box I am able to listen to the audio whilst capturing, but I can usually preview the video as well.
    In the audio / video settings the 'capture card supports simultaneous play through and capture' boxis checked - and as I say, this was fine before re-installing.
    Presumably this is as simple as a preference that has not been altered since I re-installed the program?
    If anyone could point me in the right direction it would be much appreciated.
    Thanks,
    Dan

    It is highy likely that quicktime is wacky after the FCP reinstall.
    go to /library/receipts and delete any files that say quicktime followed by a number (eg Quicktime652.pkg)
    Go to the Quicktime download web site and download the correct version for your OS and FCP version.
    Reinstall.
    Reboot.
    Repair permissions.
    Good luck.
    x

  • Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use  cmd+ r  when restarting. Is this the right way?

    Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r  when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

    Your Mac runs maintenance in the background for you.
    Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
    No idea why that was suggested.
    You may have a third party video player installed that's causing an incompatibility issue.
    Check these folders:
    /Library/Internet Plug-Ins/
    /Library/Input Methods/
    /Library/InputManagers/
    /Library/ScriptingAdditions
    ~/Library/Internet Plug-Ins/
    ~/Library/Input Methods/
    ~/Library/InputManagers/
    ~/Library/ScriptingAdditions
    The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
    To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

  • Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

    Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
    Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
    The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
    Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
    I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
    Any way to fix it?

    only $99, i thought it was closer to $175.

  • HT4623 I downloaded the ios 6 on my iphone. I'm having problems with applications. When I open any application, in seconds then closes and returns to the home screen. What could be happening?

    I downloaded the ios 6 on my iphone. I'm having problems with applications. When I open any application, in seconds then closes and returns to the home screen. What could be happening?

    Did you change any AppleID accounts or anything?  I've seen this happen when changing accounts or certain restore situations.
    If you are using iCloud you should be able to reset your phone to Factory Defaults and restore from iCloud, but it always makes me nervous.

  • Having PROBLEM with playing videos on my 5800

    Hi all,
    I bought my nokia 5800 2 days ago, and i am havig a problem with my videos.
    When i try to play a video (MP4) SOMETIMES it plays it without a problem, but SOMETIMES it plays a black screen with sound. And the most strange thing is it can play a video and in few hours it will just play sound on the same video!!
    Please try to help..

    pavilion_alex wrote:
    phones like 5800 and other similar must be updated because a new update solves the existing problems on the device.
    download and install this http://www.nokia.co.uk/get-support-and-software/download-software/device-software-update/download and carefully read the instructions it gives you before the update.
     ...Or return the phone and replace it with something from another manufacturer that either A) works out of the box, or B) doesn't require such an awkward and painful update procedure. Nokia seem incapable of either.
    Message Edited by garnett on 26-Oct-2009 12:49 PM

  • I'm having problem with exporting video from premiere pro cc 2014

    I'm using Adobe Premiere Pro CC 2014 and I'm having problem with exporting video.
    When I click Export and media, the window for exporting appears and it starts exporting video.
    But after a few minutes, it looks like it has completed exporting video and says there's a bug in exporting.
    It literally says it has a problem with compiling, but I don't know what the real problem is.
    I tried many things like restarting computer and Premire Pro but it's no use.
    But it works when I use Adobe Media Encoder CC 2014 for exporting video.
    If anyone knows any possibilities about why this problem happens, please let me know.

    I'm having a similar issue.  When I go to export my project, I add it to the render queue, set it up with the h.264 settings that I've used with countless past versions of the program, and then hit render.  Randomly, at some point in the process, the render just stops and the ETA just keeps climbing.  I actually had to save an XMF file of the CC 2014 project and bring it into the previous CC version of Premiere just to finish it.  Even a clean re-install of CC 2014 doesn't work.

  • Itunes 7.0.1 still has major problems with jerky video

    I thought the newest update to Itunes 7 would fix my problems with jerky video that have begun since this Itunes 7 came out. At first I thought maybe my computer was too old (powerbook 12" 1.5 Ghz, with maxed out RAM) to play the new resolution, but then I realized that even my old TV shows had jerky playback. It doesn't seem to matter what size. The audio works fine, but the video freezes every few seconds. This is not really acceptable and I'm thinking about uninstalling Itunes 7 until apple issues a fix that address this video playback issue. Anyone have any suggestions or heard anything? Thanks!
    - Tpetdoctor

    I located the problem of the jerky (1 to 2 frames per second) video that started after updating to iTunes7 and 7.0.1!
    Dragging (copying) the file "ATIRadeon9700GLDriver.bundle" from system/library/extensions/ to the desktop and deleting it from the extensions folder (or else simply deleting it and then dragging it from the trash to the desktop) returns normal smooth video to non-H.264 mpeg video on my second generation iMac (ATI Radeon 9600). Unfortunately, this also makes Coverflow stop working with the message "iTunes is unable to browse album covers on this computer". I'm not sure what else will be disabled by moving this file.
    Obviously, this is not a solution, or even a feasible workaround. Where can I get a "good" ATI driver? I went to the ATI site "https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&fold erID=27" and tried installing "macosx-ati-displays-4-5-7.dmg", but to no avail.

  • I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    Thanks for the reply.  I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long.  After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix.  I strongly suggest not to buy this product.

  • Problems with Flash Video

    OK - I have had intermittent problems with Flash video, basically it gets choppy, usually after about 20 minutes - half an hour of watching - recently this problem has gotten worse - coinciding with a recent system update perhaps? - it's more or less anytime I stream something, and it happens on all browsers, even when the movie has clearly downloaded and is buffered way in advance of the playhead.
    On 2 occasions recently leaving the movie to play just to see what happens has led to a kernel panic.
    I've heard alot about Flash video generally being a resource hog and not playing ball sometimes - is there a way to solve this issue? Things I have tried - reset sound to 16 bit 44.1 khz in audio/midi manager; fixed permissions; run Tech Tool - everything seems to be fine hardware wise - I think there are some incompatible driver issues that are meesing up RAM usage but have no idea what or how to solve this... Any ideas anybody?
    Thanks.

    If, as you show, you are running 10.5.2, that is out of date. You need to install the 10.5.8 combo updater.
    It is also possible that your FlashPlayer is out of date.
    The latest version of Adobe FlashPlayer can be obtained from here:
    http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
    (You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

  • Memory leak problems with loading videos over and over.

    I'm having memory leak problems with loading videos into a VideoPlayer aswell as FLVPlayback.
    What the flash should do:
    - Should be running for 7 days without having to restart the projector.
    - Interface that shows people around a 360 3D model with 5 different parts and at the stops it makes during the rotation you can click to zoom in on a location which plays a movie for that aswell.
    - Shows a video out of 5 parts for a 360 rotation in 3D in mp4 video (added each time and cleaned up, see code below).
    - Still images are used when the video clips are done playing (MovieClip in stage).
    - Should run automatically when there is no user interaction for X minutes.
    What the problem is:
    - The flash (as a exe and swf i guess) starts to consume memory over time (say 10 hours) until the projector crashes. This usually at around 1.75 GB of memory.
    I cannot see why the Flash cannot garbage collect this and free up the memory. Mabye there is something I don't understand about the garbage collection in flash?
    Here is some code from the video loading and playing:
    var fVideo:VideoPlayer;
    VideoCreate();
    function VideoReady(pEvent:VideoEvent):void
    trace("VideoReady()");
         // start playing video
    fVideo.play();
    function VideoLoad(pUrl:String):void
         trace("VideoLoad(" + pUrl +
         VideoCreate();
         if (pUrl != "")
              if (fVideoFolder + pUrl == fVideo.source)
                   fVideo.seek(0);
    VideoReady(null);
              } else {
    trace(fVideo.state);
                   if (fVideo.state !=
    VideoState.DISCONNECTED) fVideo.stop();
    fVideo.close();                                
    fVideo.load(fVideoFolder + pUrl);
         } else {
    // error no url
    function VideoCreate():void
         trace("VideoCreate()");
         // remove old one
         if (getChildAt(0) == fVideo)
              removeChildAt(0);
         fVideo = new
    VideoPlayer(1024, 768);
         addChildAt(fVideo, 0);
         fVideo.autoRewind = false;
    fVideo.addEventListener(VideoEvent.COMPLETE, VideoDonePlaying);
    fVideo.addEventListener(VideoEvent.READY, VideoReady);

    Hmm. It's in connection with Dropbox. Så apparantly you can only use one of the two at the same time if you want the programs integrated in Finder.

  • Problem with Nokia Video Manager - No video, only ...

    Hi all,
    I have a problem with nokia video manager. I have been converting movies to mp4 and watching with my cell phone for a while now. But all the videos I have converted were less than 30 min. long.
    When I tried to watch a video longer than 36 minutes, the picture froze some time around 36th minute and only the sound continued to play. I have tried several other videos with similar lenghts and all seem to freeze at the same exact point. The player continues to play the sound after picture freezes.
    Could someone please help ???
    Regards
    /Cenk

    Hi davidf
    Thanks for the information,I must confess that I always use:
    http://www.slysoft.com/en/clonedvd-mobile.html
    when transferring movies to the N95, but that is just a personal choice!
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Having Problem with stuttering video. Please help!

    I haven't had a problem with viewing video online with my laptop until a few days ago. Now, all it will do is start to play, then freeze, play for a few seconds, then freeze, etc. etc. If I am on Hulu and pause the video to allow it to buffer, it will go good for a few minutes then start the same thing over again. I have done the same thing on CBS.com, but the results haven't been as good as on Hulu. I have noticed that it is considerably worse when the commercials start. I tried uninstalling my Flashplayer several times to no avail, and I even uninstalled my Antivirus and reinstalled that thinking that might be the problem. Tried right clicking on the player when it's in use and disableing the hardware accelerator in the settings, but that didn't help. I am about ready to pull my hair out!
    OS is Windows Vista Home Premium Service Pack 2
    Using Mozilla FireFox version3.6.8 and Internet Explorer 8 version 8.0.6001.18928
    Have Adobe Flashplayer version 10.1.53.64
    antivirus is Avast! Free version 5.0.594
    If there is any other info needed, let me know!

    is a video card problem for acne

  • Problems with Flash video playback

    I'm having a problem with Flash video playback, hoping
    someone here can help.
    I have several movies which I have converted to .flv using
    the Flash authoring tool. I have then created an .swf for each
    movie, embedding the .flv along with the playback component,
    playback controls, etc.
    I can open these .swfs using Flash Player and everything
    displays and plays as expected. However, when I embed the .swf into
    a web page and open it using a browser, the playback controls don't
    show up, and the movie will only play if it has been encoded to
    autoplay. I am on an Intel Mac, using the latest Flash Player
    plug-in, and am having this problem in both Firefox 2.0.0.11 and in
    Safari 2.0.4.
    I'm guessing that the problem lies in how I have encoded the
    .swfs into the web page? Hoping someone has a solution, or at least
    a good suggestion!
    thanks,
    - sounddevisor

    Yes, that is exactly what I needed. Thanks!
    Just to clarify for anyone else who stumbles across this -
    the extra .swf files (which contain the skin for the player) need
    to be in the same directory as the .html doc which is displaying
    the video .swf. Hope that helps someone else!

  • Having lagging problems with YouTube videos, it simply takes so long for the red bar to completely load and the videos frequently pause and take too long to restart playing again.

    I have been having lagging problems with YouTube videos for a number of months now. It simply takes so long for the red bar to completely load and the videos frequently pause and take too long to restart playing again. Even with little 2 and 3 minute videos.
    I have a fast computer and my webpages load really, really fast. I have FireFox 4 browser and a Vista Home Premium 64-bit OS. So I don't have a slow computer or web browser. But these slow YouTube vids take way too long to load for some reason.
    Does anyone have any idea how I can speed up YouTube?

    Hi
    The forums are customer to customer in the first instance, Only the mods (BT) will ask for personal information through a email link. Would you mind posting your Hub stats & BT speed test results this will help all with diagnosis-
    To post the full stats from your router
    for home hub - 192.168.1.254
    Navigate to ADSL Settings or use the A-Z at the top right
    Click on More Details and then post the results.
    Run BT speed tester and post the results from http://speedtester.bt.com/
    If possible it would be best to connect to the BT master socket this will rule out any telephone/broadband extension wiring also consider the housing of the hub/router as anything electrical can cause problems as these are your responsibility, if these are found to be the case Openreach (engineer) will charge BT Broadband, which will be passed onto you, around £130.00.
    Noisy line! When making telephone calls, if so this is not good for your broadband, you can check-
    Quite line test dial 17070 option 2 and listen - should hear nothing best done with old type analogue phone digital (dect) will do but may have slight hiss If you hear noise- crackling pops etc, report it as a noisy line on your phone, don’t mention broadband, Bt Faults on 151.
    As for your FTTC its available in some areas between 40% & 80% of customers in enabled areas can receive it!
    Mortgage Advisor 2000-2008
    Green Energy Advisor 2008-2010
    Charity Health Care Provider Advisor 2010-
    I'm alright Jack....

  • Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it drops a message again and again, preventing me to do anything about the setting.

    Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it dropps the message again and again, preventing me to do anything about the setting.

    A Fix for "Your network preferences have been changed by another application" Error 
    In the Library/Preferences/SystemConfiguration/ folder delete the following:
    com.apple.airport.preferences.plist
    NetworkInterfaces.plist
    preferences.plist
    com.apple.nat.plist
    You will have to re-configure all your network settings since deleting.
    (10.4.10)
    Use Software Update to update your OS to last version of Tiger.  Install all the other updates that goes along w/it.

Maybe you are looking for