Problems with Sliding Panels in IE

I have *finally* gotten my sliding panels script working
properly. However (and not surprisingly), I am having an issue with
the addClass and removeClass functions. Although they work properly
in Firefox, in IE 6 and 7 the add and remove class functions are
not working properly.
Any ideas on this?
Here's the
example
Thanks, as always!
Joel

Mellymel2000 wrote:
> Hi There,
> I'm new to CS3 and can't understand why my animated
collapsible panels don't
> work in Internet Explorer. Did I miss some basic notes
somewhere? Is it just IE
> 5.2 it doesn't work in? I have created a vertical menu
bar with them and need
> to know If it can't be done here does anyone know how
else I might go about it?
> Starting to feel a little desperate and any help would
be welcome.
> Cheers!
>
>
Is that IE 5.2 on the Mac? If so, don't worry about it, test
it on IE6
on a PC instead. The last Mac IE was 5.5 and has not been
developed in
about 5 years, its dead, and not a lot works on it nowadays.
On Mac test
Safari and Firefox, same on PC but with Opera and IE6 and 7.
Steve

Similar Messages

Problem with tabbed panel

I have a problem with tabbed panel...this panel has 3 columns, I copied to each of them a diffrent text (diffrent height)...I expected to obtain diffrent working area of column, for example 1st column-height 7500 px, 2nd-1500 px, 3rd-2500 px, but I received one height 7500 px, each column has been formatted to this size....below a text I have “empty space”- (it is a diffrence between working area and text area)...I put the text to the 1st column for example 7200 px height, empty space below this text is 300 px I received 7500 px of working area in this column, here the problem doesn`t exist but….2nd column i have height of text for example 1300 px, below this text i have 6200 px empty space...It should be height 1300 px of text and maybe 200 px of empty space...so the working area could have at 1500 px not 7500 px of height....I try to change it (to for example 1500 px) but it still return to the basic 7500 px height and can`t do it...The solution is to use another form like. the accordion form..but it is a row form….when you put a diffrent sized text (height) you will receive diffrent size of working area (height), you obtain 7200px text +300 px empty space=7500 working area in 1st row.. 1200 px text + 300 px empty space=1500 workin area px in 2nd row and 2500 working area px in 3rd row…everything is fine in this form…each row has been formatted to the different size of height…but I prefer to use a tabbed panel (column form) instead a accordion form.…I don`t to waste the time to correct the code in html text editor like PSPad…
Best Regards
Kamil

A couple of threads here that should answer your query.
http://forums.adobe.com/message/5080345
http://forums.adobe.com/message/5104253
Thanks,
Vinayak

I have some problems with element Panel Label and Message.

I have some problems with element Panel Label and Message. When I create form from VO attributes then I have Label for input text element. If I use Panel Label and Message element then I need to copy LABEL from input text element to Panel Label and Message element LABEL PROPERTY. Can I define in View object that I don't need label and want all attributes in Panel Label and Message element?
BEST REGARDS

You can simply remove the label attribute for the input text on the page.
sid

Safari 4 problems - HTMLDataSet/Sliding Panels

Hi,
I've been building a fairly basic photo gallery site and was having no problems with the site until I downloaded and installed Safari 4. For some reason the detailRegions are not loading properly in Safari 4. I have thumbnails in the sliding panels that load fine but the larger versions of the photos no longer appear in Safari below the sliding panels and on the right sidebar the paypal buttons no longer appear either. IE and FF seem to be working fine still. Any help would be greatly appreciated. I'm very new to this so please bear with me if I have any glaring mistakes. THANKS!!!
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Flowers</title>
<link href="mainStyles.css" rel="stylesheet" type="text/css" />

<script src="SpryAssets/SprySlidingPanels.js" type="text/javascript"></script>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryHTMLDataSet.js" type="text/javascript"></script>
<script src="SpryAssets/SpryDOMUtils.js" type="text/javascript"></script>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
<script type="text/javascript">var ds1 = new Spry.Data.HTMLDataSet(null, "gallery", {columnNames: ['Thumbnail', 'PictureTitle', 'PictureResolution1', 'Price1', 'Button1', 'PictureResolution2', 'Price2', 'Button2', 'HiRes_Id',], rowSelector: "div.galleryItem", dataSelector: "p"});</script>
</head>
<body class="thrColHybHdr">
<div id="container">
<div id="header">
    <a href="index.html"><img src="images/dmlogo.jpg" width="400" height="100" alt="Eye Focus Photography" /></a></div>

<div id="sidebar1">
    <ul id="MenuBar1" class="MenuBarVertical">
      <li><a href="index.html">Home</a></li>
      <li><a href="animals.php">Animals</a></li>
      <li><a href="barns.php">Barns</a></li>
      <li><a href="cities.php" class="MenuBarItemSubmenu">Cities</a>
        <ul>
          <li><a href="washingtondc.php">Washington DC</a></li>
          <li><a href="nyc.php">New York City</a></li>
        </ul>
      </li>
      <li><a href="fireworks.php">Fireworks</a></li>
      <li><a href="flowers.php" class="selected">Flowers</a></li>
      <li><a href="lighthouses.php">Lighthouses</a></li>
      <li><a href="misc.php">Miscellaneous</a></li>
      <li><a href="national_parks.php">National Parks</a></li>
      <li><a href="plants.php">Plants</a></li>
      <li><a href="waterfalls.php">Waterfalls</a></li>
      <li><a href="contact.html">Contact</a></li>
    </ul>
</div>
<div id="sidebar2">
     <div id="detailArea1" spry:detailregion="ds1">
          <div class="detailText">
         <h1>{PictureTitle}</h1>
         <p>{PictureResolution1}</p>
         <p>{Price1}</p>
        <p>{Button1}</p>
        <p>{PictureResolution2}</p>
         <p>{Price2}</p>
        <p>{Button2}</p>
         <br class="clearfloat"/>
         </div>
     </div>
</div>
<div id="mainContent">
    <div id="slidingGallery" class="SlidingPanels" tabindex="0" spry:region="ds1">
     <div id="galleryContentGroup" class="SlidingPanelsContentGroup">
         <div id="panelContents" class="SlidingPanelsContent" spry:repeat="ds1" spry:setrow="ds1">
        <div class="galleryItem">
        <p class="thumbnail">{Thumbnail}</p>
        <p class="pictureTitle">{PictureTitle}</p>
        </div>
        </div>
     </div>
</div>
<p id="panelNav" class="fltlft">
     <a href="#" id="firstPanel" onclick="sp.showFirstPanel(); return false;">First</a>
     <a href="#" id="previousPanel" onclick="sp.showPreviousPanel(); return false;">Previous</a>
     <a href="#" id="nextPanel" onclick="sp.showNextPanel(); return false;">Next</a>
     <a href="#" id="lastPanel" onclick="sp.showLastPanel(); return false;">Last</a>
</p>
<div id="detailArea2" spry:detailregion="ds1">
     <div class="detailImg">
    <img src="images/flowers/{HiRes_Id}" alt="{PictureTitle}" /><br class="clearfloat"/>
    </div>
</div>
<div id="gallery">
<div class="galleryItem">
<p class="thumbnail"> <a href="images/flowers/3454_thumb.jpg"><img src="images/flowers/3454_thumb.jpg" alt="Daisy" width="145" height="97" class="thumbnail" /> </a> </p>
<p class="pictureTitle">Daisy</p>
<p class="pictureResolution">Resolution: 900x600</p>
<p class="picturePrice">Price: $1.00</p>
<p class="button">
<span><form action="https://www.sandbox.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick"/>
<input type="hidden" name="hosted_button_id" value="5397389"/>
<input type="hidden" name="item_name" value="Daisy"/>
<input type="hidden" name="custom" value="3454_900.jpg"/>
<input type="hidden" name="amount" value="1.00"/>
<input type="hidden" name="return" value=""/>
<input type="hidden" name="lc" value="MY"/>
<input type="hidden" name="rm" value="2"/>
<input type="hidden" name="bn" value="PP-BuyNowBF"/>
<input type="image" src="https://www.sandbox.paypal.com/en_US/i/btn/btn_buynow_LG.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online!"/>
</form></span>
</p>
<p class="pictureResolution">Resolution: 2048x1365</p>
<p class="picturePrice">Price: $5.00</p>
<p class="button">
<span><form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick"/>
<input type="hidden" name="hosted_button_id" value="5111872"/>
<input type="hidden" name="item_name" value="Daisy"/>
<input type="hidden" name="custom" value="3454_2048.jpg"/>
<input type="hidden" name="amount" value="5.00"/>
<input type="hidden" name="option_name_1" value="flowers"/>
<input type="hidden" name="return" value=""/>
<input type="hidden" name="lc" value="MY"/>
<input type="hidden" name="rm" value="2"/>
<input type="hidden" name="bn" value="PP-BuyNowBF"/>
<input type="image" src="https://www.paypal.com/en_US/i/btn/btn_buynow_LG.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online!"/>
</form></span>
</p>
<p class="pictureHires">3454_wm.jpg</p>
</div>
<div class="galleryItem">
<p class="thumbnail"> <a href="images/flowers/6586_thumb.jpg"><img src="images/flowers/6586_thumb.jpg" alt="Sun Orchid" width="145" height="97" class="thumbnail" /> </a> </p>
<p class="pictureTitle">Sun Orchid</p>
<p class="pictureResolution">Resolution: 900x600</p>
<p class="picturePrice">Price: $1.00</p>
<p class="button">
<span><form action="https://www.sandbox.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick"/>
<input type="hidden" name="hosted_button_id" value="5397419"/>
<input type="hidden" name="item_name" value="Sun Orchid"/>
<input type="hidden" name="custom" value="6586_900.jpg"/>
<input type="hidden" name="amount" value="1.00"/>
<input type="hidden" name="return" value=""/>
<input type="hidden" name="lc" value="MY"/>
<input type="hidden" name="rm" value="2"/>
<input type="hidden" name="bn" value="PP-BuyNowBF"/>
<input type="image" src="https://www.sandbox.paypal.com/en_US/i/btn/btn_buynow_LG.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online!"/>
</form></span>
</p>
<p class="pictureResolution">Resolution: 2048x1365</p>
<p class="picturePrice">Price: $5.00</p>
<p class="button">
<span><form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick"/>
<input type="hidden" name="hosted_button_id" value="5397432"/>
<input type="hidden" name="item_name" value="Sun Orchid"/>
<input type="hidden" name="custom" value="6586_2048.jpg"/>
<input type="hidden" name="amount" value="5.00"/>
<input type="hidden" name="option_name_1" value="flowers"/>
<input type="hidden" name="return" value=""/>
<input type="hidden" name="lc" value="MY"/>
<input type="hidden" name="rm" value="2"/>
<input type="hidden" name="bn" value="PP-BuyNowBF"/>
<input type="image" src="https://www.paypal.com/en_US/i/btn/btn_buynow_LG.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online!"/>
</form></span>
</p>
<p class="pictureHires">6586_wm.jpg</p>
</div>
</div>
    <br class="clearfloat"/>
     </div>
     <br class="clearfloat" />
   <div id="footer">
    <p>© 2009</p>
</div>
     </div>
<script type="text/javascript">

</script>
</body>
</html>

It doesn't work correctly in Firefox either,
If you check out generated code, you will see that the data ins't selected correctly, or that maybe your HTML is correctly.
For example.. type this in the url bar of your browser; javascript:alert(ds1.getData()[0]['HiRes_Id']); and you will see it alerts <span></span>.
So i would suggest to recheck your rowSelectors and validate your page for HTML errors.
Related documentation:
http://labs.adobe.com/technologies/spry/samples/htmldataset/RowAndDataSelectorSamples.html

Problems with Query Panel with Table

Hi. I'm having a problems with this component in runtime. I'm using JDev 11.1.1.1 with ADFBC.
The query uses three optional parameters. When i put a value for the first and leave other blank and execute query, following error is produced:
03/11/2009 04:02:28 AM oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator handleError
GRAVE: Server Exception during PPR, #6
javax.el.ELException: java.lang.ClassCastException: oracle.jbo.common.ViewCriteriaImpl cannot be cast to oracle.jbo.ViewCriteriaRow
     at com.sun.el.parser.AstValue.invoke(AstValue.java:161)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodExpression(UIXComponentBase.java:1282)
     at oracle.adf.view.rich.component.UIXQuery.broadcast(UIXQuery.java:115)
I couldn't find any reference about this. Please help....
Thanks

Frank,
I am also getting the same error. The version I am using is 11g Release 1(11.1.1.2.0)
Here is what I did:
1. created a view criteria on a view object
2. all are optional
3. Dragged the view criteria as a query component (query panel with query table) on to the design layout
and the error when I clicked the Search button is:
javax.el.ELException: java.lang.ClassCastException: oracle.jbo.common.ViewCriteriaImpl cannot be cast to oracle.jbo.ViewCriteriaRow
     at com.sun.el.parser.AstValue.invoke(AstValue.java:161)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodExpression(UIXComponentBase.java:1289)
     at oracle.adf.view.rich.component.UIXQuery.broadcast(UIXQuery.java:115)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at sni.foundation.facesextensions.filters.FoundationFilter.doFilter(FoundationFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.ClassCastException: oracle.jbo.common.ViewCriteriaImpl cannot be cast to oracle.jbo.ViewCriteriaRow
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding._clearFilterCriteriaRows(FacesCtrlSearchBinding.java:4549)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding._addFilterCriteria(FacesCtrlSearchBinding.java:4603)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.processQuery(FacesCtrlSearchBinding.java:423)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
Thanks
Venkatesh

Trying to come to grips with sliding panels and datasets

Hi there!
I've just started looking into Spry (love it so far!) but
having an issue combining the sliding panels widget and a Spry
dataset. The widget works fine and the dataset works fine when
seperate, but I come up against some problems when I combine them.
As a guide, I've been using the following page:
http://www.pixelz.co.uk/spryArticle.htm
(copy of the article in the Spry Zip file)
and using the Scenario 2 example at the end of the page.
Unfortunately, there were a few bugs in it (like a colon
where there should have been a semicolon and no titles in the
navigation <a> tags at the top) so I did a little debugging
and tied in my own dataset. The code that is running on this page (
http://www.pixelz.co.uk/spryTest.html)
looks like so:
quote:
<head>
<script language="javascript" type="text/javascript"
src="includes/xpath.js"></script>
<script language="javascript" type="text/javascript"
src="includes/SpryData.js"></script>
<script language="javascript" type="text/javascript" >
var dsTest = new Spry.Data.XMLDataSet("data/xmlTest.xml",
"specials/menu_item");
</script>
<script language="javascript" type="text/javascript"
src="includes/SprySlidingPanels.js"></script>
<link href="includes/SprySlidingPanels.css"
rel="stylesheet" type="text/css" />
</head>
<body>
<div spry:region="dsTest" spry:repeatchildren="dsTest">
<a href="#"
onclick="sp1.showPanel('detail{ds_RowID}');">Page
{ds_RowID}</a>
</div>
<div id="sPanel" class="SlidingPanels"
spry:region="dsTest">
<div class="SlidingPanelsContentGroup"
spry:repeat="dsTest">
<div id="detail{ds_RowID}"
class="SlidingPanelsContent">
<h3>{item}</h3>
<p>{description}</p>
<p><strong>{price}</strong></p>
</div>
</div>
<script language="javascript" type="text/javascript">
var sp1 = new Spry.Widget.SlidingPanels("sPanel");
</script>
</div>
</body>
The problem I'm having is that the panels don't change when
the links are clicked. It seems to pull in the data fine, but the
panels dont switch.
When I looked at the generated source, it doesn't look quite
right:
quote:
<body>
<div id="spryregion1" class="">
<a onclick="sp1.showPanel('detail0');" href="#">Page
0</a>
<a onclick="sp1.showPanel('detail1');" href="#">Page
1</a>
<a onclick="sp1.showPanel('detail2');" href="#">Page
2</a>
<a onclick="sp1.showPanel('detail3');" href="#">Page
3</a>
</div>
<div id="sPanel" class="SlidingPanels" style="overflow:
hidden;">
<div class="SlidingPanelsContentGroup" style="left: 0px;
top: 0px;">
<div id="detail0" class="SlidingPanelsContent
SlidingPanelsCurrentPanel">
</div>
</div>
<div class="SlidingPanelsContentGroup" style="left: 0px;
top: 0px;">
<div id="detail1" class="SlidingPanelsContent
SlidingPanelsCurrentPanel">
</div>
</div>
<div class="SlidingPanelsContentGroup" style="left: 0px;
top: 0px;">
<div id="detail2" class="SlidingPanelsContent
SlidingPanelsCurrentPanel">
</div>
</div>
<div class="SlidingPanelsContentGroup" style="left: 0px;
top: 0px;">
<div id="detail3" class="SlidingPanelsContent
SlidingPanelsCurrentPanel">
</div>
</div>
</div>
</body>
I'm not sure, but I think the repeating region is a bit
screwy, but I'm really not sure where to proceed from here.
Any help would be appreciated! Thanks!
Gareth

Right - fixed it!
<div class="SlidingPanelsContentGroup"
spry:repeat="dsTest">
<div id="detail{ds_RowID}"
class="SlidingPanelsContent">
should have read
<div class="SlidingPanelsContentGroup">
<div id="detail{ds_RowID}" class="SlidingPanelsContent"
spry:repeat="dsTest">
oh well...

Sudden problem with lxde panel

im not sure what i did, but this problem seems to have popped up out of nowhere......when i start lxde, the panel keeps flashing, cant click on anything, wondering whats going on with it, if anyone knows

oni5115 wrote:
ssl6 wrote:
there was something in that thread about modifying a line in a config file, the orignal line is lxde --profile LXDE........which basically tells it to load a profile from ~/.config/something/something/LXDE. i wiped that folder rather than change the config, i think the folder was rebuilt with a new default profile, and i just reconfigured my settings
sorry i cant be more usefull at the moment. im not near the machine i have with LXDE
Wiping the config file and re-configuring seems to solve this problem. At least, once I fixed it I have not seen it come back again.
I did this also when I had problems with the menu not working and causing my panels to reset.
So far a great fix. Now panels are back to normal. I will edit if problem shows itself again.

Problems with Application panel

Has anyone ran into problems with the Applications panel? I
using the Application panel to insert Bindings and Server
Behaviors. I can't get it to work. It says that I have a connection
and I'm able to see the tables and diplay recordsets. But I'm
unable to display multiple recordsets and insert data into a
database. I'm reading Dreamweaver 8 with ASP, Cold Fusion, and PHP:
Training from the Source. I've done what the book has told me. Any
ideas on what the problem could be?
The only thing different that I did from the book is how I
connect to a database. I have this on the top of each asp page.
<%@LANGUAGE="VBSCRIPT"%>
<%
Set MM_conn_newland_STRING = CreateObject("ADODB.Connection")
MM_conn_newland_STRING.ConnectionString =
"Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=D:\website\newland\database\newland_tours.mdb;"
MM_conn_newland_STRING.Open
%>
The book uses a DSN and it has a seperate page for a
connection:
<%@LANGUAGE="VBSCRIPT"%>


Just want to assure, u said that u want to insert date from the form. Do u mean that u want to insert the date into mysql database. But it came out with the error. Am I right?

Problem with front panel USB connector

Motherboard: MS-6750
I have a problem with my front panel USB connector JUSB2 not working.
I have checked the connection to be sure that it is oriented correctly.
I also made sure that it was enabled in the BIOS.
Still no luck. There is not any voltage on this either.
I see a jumper or pin labeled JGS1 just below the JDLED1...do not know what this is and cannot find it in the manual.
Any ideas on what this is and how I might trouble shoot the USB connector?

Which 6570 MB do you have, if its the K7N2 Delta 2 Platinum and came with the Dled bracket try plugging that into that port on the mainboard and see if those usb ports work as it could be the usb hub itself not working on the front. Hope this helps Dok

Problem with Accordion Panels

Hi
I have an issue with Accordion Panels.
http://characteraday.businesscatalyst.com/guided.html
You can see in the link above that I have Accordion Panels on the right side that say open/close tip. The first one open and close and displays the tip. All the others do the same but when they open then push the one under it down. The first one does not do this and I like this a lot better. Any ideas how to make them all work the way the first one "Enter the Character's name" works.
Thanks for your time.

Modify the following line by adding the mark-up coloured red.
<div class="AccordionPanelContent"><span class="CollapsiblePanelContent"><img src="productimages/tinyimages/doorkitseat.jpg" width="50" height="50">The <strong>Door Insert Kit</strong> is a bathtub conversion kit. By removing a portion of the bathtub wall and inserting a door, an existing bathtub becomes accessible, retaining its use a a bathtub. <em><a href="doorkitandseat.html"><strong>More</strong></a></em></span></div>
I hope this helps.
Ben

What's problem with File Panel?

Hi All!
I'm web designer, while developing my site, my work is
breaking a problem with File management of DMX.
First, I develop site in DMX8 (ASP + SQL), then when I open
that site in DMXCS3 - Note: all file still in only one Folder in
HDD on (D\: Drive), (example: photo-editor.asp), this file content
is last time modify. And when I open again this file in DMX8 - the
file content of this file (photo-editor.asp) not same with new
version in DMXCS3. It is old version!.
I don't understand why that. (note: I don't check Enable
cache in Local info in Site Definition). Please help me about this
problem!
Thank for All!

Are both versions (DW8 and DWCS3) using the SAME local site?
Look in your
site definition in both versions of DW, and tell us what the
path is to the
local root folder, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"alonehero" <[email protected]> wrote in
message
news:fao4vg$n25$[email protected]..
> Hi All!
>
> I'm web designer, while developing my site, my work is
breaking a problem
> with
> File management of DMX.
>
> First, I develop site in DMX8 (ASP + SQL), then when I
open that site in
> DMXCS3 - Note: all file still in only one Folder in HDD
on (D\: Drive),
> (example: photo-editor.asp), this file content is last
time modify. And
> when I
> open again this file in DMX8 - the file content of this
file
> (photo-editor.asp)
> not same with new version in DMXCS3. It is old version!.
>
> I don't understand why that. (note: I don't check Enable
cache in Local
> info
> in Site Definition). Please help me about this problem!
>
> Thank for All!
>

Problem with File panel and Local files

I am having a couple of problem using Dreamweaver (which may be related) and can’t find any appropriate help on the web site.
I have created a small website and have it up and running.    I’m now trying to do some minor modifications.     But Dreamweaver seems to have lost the address of my local files on my home computer (although files are still there in the same place.)     In the on-line training material it shows how to define where the root directory is when you start developing a site, but I can’t find where these setting are so I can check and if nessessary amend them.   If I go to Define Site from the Site drop down options, this does not allow me to check or define the root directory.
Secondly, in the File panel (lower right on the screen) the address bar at the top only shows the remote files and the icons to the right (“put”, “get”, etc) have disappeared and I can’t seem to get them back.   Also that lower panel seems to be floating rather than being fixed like it was.     I have tried clicking on Classic View in the Workspace layout options but this doesn’t move things back to how they were when I first started using Dreamweaver (just a few weeks ago).
Can you offer any advice on what the problem is and how to manage it? Many thanks.   I'm using Dreamweaver CS4 and an iMac.

Immediately below the Tabs saying "Files" and Assets" is a small box
with arrow on the right to show the drop down list.        In the box
on the right there's an icon of two networked computers. Then it
says, "ftp://Hill farm Web Site" which is the name of my website.
If I click on the arrows to pull up the drop-down box, I get four
options divided by a line.   Above the line the options are Computer,
HD and ftp://Hill farm Web Site. Below the line it says manage sites.
Below this is list of files that make up my website in a directory
structure.   The header for the first column reads, "Local Files",
which appears to be untrue, because the top line in the directory
structure below reads, "ftp://Hill farm Web Site".
Does this help?
regards
David

Problem with Preview panel in Bridge CS3

Hello,
I've got a problem and I don't seem to get rid of it.
When I use the Adobe Bridge, everything seemds to work fine, EXCEPT... for the preview panel.
It just keeps on showing a 'blank gap' or blank window, from where I can see a part of my Desktop through.
I hope this picture makes it more clear.
http://i36.photobucket.com/albums/e39/Stef_r/2009-02-08_000747.png
Als, when I select a photo in Bridge, it doesn't show up in the preview panel. It just keeps on showing the freezed picture of the part of my desktop.
I use Windows Vista on my laptop now, and that's were the problem is.
On my old XP laptop, with much lower performance, it worked fine under Windows XP.
http://i36.photobucket.com/albums/e39/Stef_r/2009-02-08_000843.png
Does anyone recognise this problem or has a solution for it?
I have allready tried reinstalling both my laptop with Vista as wel reinstalling the Adobe suite.
Thanks for the responce!
With kind regards,
Stefan

Thanks for the replies!
Although I still haven't found the real problem for it, the preview panel keeps on freezing, I do have a wokaround found for it.
Because I have a docking station for my laptop, with some free slots in it, I bought a second hand Video Card with 512MB and better performance than the on-board card in the laptop.
I hooked up a external LCD monitor to it and now it works just fine, with no additional modifications in Bridge.
So, although the Bridge / video card still occurs on the laptop, I don't mind working this way.
Maybe a newer driver in the future will solve this problem.
Kind regards,
Stefan

Problem with control panel in vista on gx620

My friend and i who just recently both bought the MSi gx620 notebook have a very strange problem. After a short while some of the objects in the control panel have become not functional. Things that does not worl is:
Windows Update
Windows power control
the window where you change desktop resolution and background image
User control
and some others
the thing it does it that it seems to open an explorer window but then immidiately closes it again.
Some of the things in the control panel still works such as device manger and other things.
We suspect that it might have to do with some of the updates vista downloads and installs but we do not know which one, have anyone else had this problem or have any idea on how to solve it?

got exactly the same problem on my gx 720. I have tried to reinstalled c drive which helped until i tried either to update windows or install a new program.
Im considering sending the notebook to maintainance!
Patrick

Problem with Property Panel

WinXP Sp3
In CS4, the Property Panel at the bottom of the page shows
the second row of
CSS buttons, partially obscured. Is there a way of fixing
this? I have tried
changing the resolution on my monitor to every conceivable
combination, but
nothing happens.
Any suggestions will be greatly appreciated.
Baron

We are having the same issue with the Remote Panels. Occasionally when a user using remote panels releases
control of the panel the LabView program crashes with an Error 1 code at some of the property nodes.
Some of the property nodes are writes and some are reads. Which one it errors on differs each time.
We are currently using Labview 8.2.1. The program was originally written in Labview 7.0. We did not
have this problem in 7.0.
I have been progressively removing some of the "offending" property nodes, but LabView just errors out with a
code of 1 on a different property node.
I believe there is a bug in the NI code for the remote panel somewhere.
If anyone knows a good workaround I would appreciate it.
Thanks in advance for any help,
steve

Problems with Sliding Panels in IE

Similar Messages

Maybe you are looking for