Problems with sound clips after conv. iMovie project via mediabrow. to iDVD
I have made a 30 min long project with 80 small video clips. The project is alright when viewing it in iMovie, but after I have prepared via the mediabrowser and thenaften view the project in iDVD - every other sound clips is without sound and on some video clips it mixes some soundtracks from other tracks into it. Any ideas, I'm getting very frustrated
Thanks in advance
I'm having the same problem. Everything plays beautifully in Imovie and then when its shared with idvd or media browser it all goes weird. I get sound from footage that I either haven't used at all or audio that I have detached and deleted playing over the top of other bits, or sound going out of sync.
All my video footage was shot with 12 bit audio. For most of the footage that I've used, I've detached and deleted the original audio and put other tracks over the top, the footage that still has it's original audio, I've converted so it has 16 bit audio. I hoped that would solve the problem but my newest version of the video seems to be worse than before.
Everything plays fine in imovie and then warps when it's shared.
Any ideas would be greatly received as I am going crazy and wasting a heck of a lot of time that I don't really have!!!
Similar Messages
-
E52 - Problem with sound clips
Hello people,
I'm with the latest E52 software.
1. With the old and the new one there is a problem. First when you record a sound clip, It is not appearing in Menu-> Media->Gallery. The only way to access my sound clips is to open file manager and browse it from there and that is little bit complicated.
2. The second problem with the sound clips is that each new recorded clip is with name and number after that. I have deleted all sound clips but the program remembers the last number and continue from the last. Can I reset and start my clips from number 001 ?
Thank you.Hi,
Probably, one setting is wrong:
Select the recorder
Options
Parameters
Recording quality must be set to: Standard (High will not work, neither MMS compatible)
You should find your recordings in Gallery, Audio clips.
OK ?
E51 @ 400.34.011 RM-244 Maps V3.01 09wk44 Map version 0.123.112
E52 @ 052-003 RM469 Maps V3.04 10wk32 Map version 0.1.25.114 -
Problem with sound, maybe after upgrade.
Hello guys,
Yesterday I did a system upgrade and after I rebooted there seems to be a problem with my sound. There is now a popping sound during startup from both speakers, and again a crackling sound when it wakes from sleep. If I connect my headphones there is no sound output through it. The output is through speakers. My system is an Asus X201E. This is a part of pacman.log after which the problem started:
[2013-09-24 20:16] [PACMAN] Running 'pacman -Syu'
[2013-09-24 20:16] [PACMAN] synchronizing package lists
[2013-09-24 20:17] [PACMAN] starting full system upgrade
[2013-09-24 20:41] [PACMAN] upgraded elfutils (0.155-1 -> 0.156-1)
[2013-09-24 20:42] [PACMAN] upgraded fakeroot (1.19-1 -> 1.20-1)
[2013-09-24 20:42] [PACMAN] upgraded imagemagick (6.8.6.9-1 -> 6.8.6.10-1)
[2013-09-24 20:43] [PACMAN] upgraded inkscape (0.48.4-10 -> 0.48.4-11)
[2013-09-24 20:43] [PACMAN] upgraded jre7-openjdk-headless (7.u40_2.4.1-3 -> 7.u40_2.4.2-1)
[2013-09-24 20:43] [PACMAN] upgraded jre7-openjdk (7.u40_2.4.1-3 -> 7.u40_2.4.2-1)
[2013-09-24 20:43] [PACMAN] upgraded jdk7-openjdk (7.u40_2.4.1-3 -> 7.u40_2.4.2-1)
[2013-09-24 20:43] [PACMAN] upgraded lib32-elfutils (0.155-2 -> 0.156-1)
[2013-09-24 20:43] [PACMAN] upgraded lib32-systemd (204-1 -> 207-1)
[2013-09-24 20:43] [PACMAN] upgraded man-pages (3.53-1 -> 3.54-1)
[2013-09-24 20:43] [PACMAN] upgraded networkmanager (0.9.8.2-1 -> 0.9.8.4-1)
[2013-09-24 20:43] [PACMAN] upgraded pstoedit (3.62-2 -> 3.62-3)
[2013-09-24 20:43] [PACMAN] upgraded serf (1.3.0-1 -> 1.3.1-2)
[2013-09-24 20:43] [PACMAN] upgraded subversion (1.8.1-2 -> 1.8.3-1)
and output of lsmod:
Module Size Used by
nls_cp437 5953 1
vfat 10055 1
fat 51827 1 vfat
uvcvideo 72804 0
ath3k 7557 0
btusb 18496 0
videobuf2_vmalloc 3272 1 uvcvideo
videobuf2_memops 2335 1 videobuf2_vmalloc
videobuf2_core 27797 1 uvcvideo
bluetooth 308340 3 ath3k,btusb
videodev 110188 2 uvcvideo,videobuf2_core
media 11591 2 uvcvideo,videodev
snd_hda_codec_hdmi 30336 1
snd_hda_codec_realtek 37032 1
joydev 9663 0
arc4 2000 2
x86_pkg_temp_thermal 6959 0
intel_powerclamp 8802 0
coretemp 6326 0
kvm_intel 129393 0
kvm 379223 1 kvm_intel
crc32_pclmul 3019 0
crc32c_intel 14249 0
ghash_clmulni_intel 4501 0
ath9k 91043 0
cryptd 8473 1 ghash_clmulni_intel
ath9k_common 1991 1 ath9k
ath9k_hw 392347 2 ath9k_common,ath9k
microcode 13488 0
ath 15681 3 ath9k_common,ath9k,ath9k_hw
asus_nb_wmi 7368 0
asus_wmi 16306 1 asus_nb_wmi
sparse_keymap 3114 1 asus_wmi
alx 25191 0
mac80211 453808 1 ath9k
iTCO_wdt 5407 0
iTCO_vendor_support 1929 1 iTCO_wdt
snd_hda_intel 36520 2
snd_hda_codec 148129 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
cfg80211 402729 3 ath,ath9k,mac80211
snd_hwdep 6332 1 snd_hda_codec
snd_pcm 77765 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7234 2 snd_pcm,snd_hda_intel
snd_timer 18718 1 snd_pcm
rfkill 15698 4 cfg80211,bluetooth,asus_wmi
i915 610807 3
pcspkr 2027 0
snd 59141 11 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
evdev 10693 13
ac 3324 0
psmouse 85356 0
serio_raw 5041 0
soundcore 5450 1 snd
wmi 8347 1 asus_wmi
i2c_i801 11269 0
intel_agp 10872 1 i915
intel_gtt 12664 2 i915,intel_agp
drm_kms_helper 35854 1 i915
mdio 3525 1 alx
drm 235996 4 i915,drm_kms_helper
thermal 8620 0
button 4669 1 i915
video 11380 2 i915,asus_wmi
battery 6925 0
lpc_ich 13112 0
mperf 1267 0
mei_me 9296 0
mei 61875 1 mei_me
i2c_algo_bit 5391 1 i915
i2c_core 23720 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
shpchp 25457 0
processor 24917 0
ext4 470412 1
crc16 1359 2 ext4,bluetooth
mbcache 5866 1 ext4
jbd2 83376 1 ext4
hid_logitech_dj 10567 0
usbhid 41466 0
hid 88758 2 usbhid,hid_logitech_dj
sd_mod 30899 4
ahci 22888 3
libahci 21393 1 ahci
ehci_pci 4120 0
libata 171318 2 ahci,libahci
xhci_hcd 91419 0
ehci_hcd 48084 1 ehci_pci
scsi_mod 128695 2 libata,sd_mod
usbcore 178049 7 ath3k,btusb,uvcvideo,ehci_hcd,ehci_pci,usbhid,xhci_hcd
usb_common 1648 1 usbcore
and lspci -vv:
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_hcd
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7e1a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e18000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 107f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e17000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation 7 Series Chipset Family LPC Controller (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e16000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e15000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel modules: i2c_i801
02:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
Subsystem: Lite-On Communications Inc Device 6628
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at f7d80000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
03:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 10)
Subsystem: ASUSTeK Computer Inc. Device 200f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at e000 [size=128]
Capabilities: <access denied>
Kernel driver in use: alx
Kernel modules: alx
Any idea as to what happened? Also, I am using alsa. Thanks.
Edit: There is also a crackling sound when I connect or disconnect my headphone.
Last edited by dabholkaras (2013-09-25 11:30:29)Hello dabholkaras,
Today I did a system upgrade and after I met a similer sound problem.
I resolved this problem by downgrade packages as follows;
upgrade /var/log/pacman.log:
[2013-09-28 18:14] [PACMAN] upgraded linux-firmware (20130725-1 -> 20130903-1)
[2013-09-28 18:14] [PACMAN] upgraded linux (3.10.10-1 -> 3.11.2-1)
[2013-09-28 18:14] [PACMAN] upgraded linux-headers (3.10.10-1 -> 3.11.2-1)
downgrade command:
~ $ sudo pacman -U /var/cache/pacman/pkg/linux-firmware-20130725-1-any.pkg.tar.xz
~ $ sudo pacman -U /var/cache/pacman/pkg/linux-headers-3.10.10-1-x86_64.pkg.tar.xz
~ $ sudo pacman -Ud /var/cache/pacman/pkg/linux-3.10.10-1-x86_64.pkg.tar.xz
[2013-09-28 23:45] [PACMAN] downgraded linux-firmware (20130903-1 -> 20130725-1)
[2013-09-28 23:46] [PACMAN] downgraded linux-headers (3.11.2-1 -> 3.10.10-1)
[2013-09-28 23:49] [PACMAN] downgraded linux (3.11.2-1 -> 3.10.10-1) -
Problem with importing a clip from another iMovie project
Hello
I want to import a clip from one iMovie project to another iMovie project.
Both projects are in 16:9, but when I import a clip it's no longer in 16:9.
The clip is croped and I have a black bar on the right and left side.
How can I solve this ?
JufkeHave you tried Copying the clip in Project A and Pasting it into Project B?
When you Copy and Paste clips, try to Copy and Paste all at the same time. More here:
http://discussions.apple.com/thread.jspa?messageID=2356757�
Karl -
Problem with sound after update
Hello
After update to 11.3 I have no bass sound in subwoofer in Firefox browser (youtube). I uninstall the newest version and install previous (11.2) and bass plays ok.
My os: Windows 7 x64. Sound card Creative X-fi.Hello!
My problem is summed up in this topic.
Updated Flash Player with 11.3 this morning (june 12th 2012) and since then my 7.1 Sound System works only 2.1. If i enable EAX Effects, works on 7.1 but since it`s just a room it sounds very odd.
I have no problem with sound on HTML 5 websites for that matter, Winamp, Video Players, games.
Uninstalled Flash Player, sounds work ok without it on different browsers, other than Chrome (since it has FP built in).
I hope for a sollution soon.
Thank you.
*edit*
Untill there is a permanent solution, i found a way to deal with my issue and i hope it will help others.
I personally use Chrome and this is for this browser:
1. Type "about:plugins" w/o the quotation in the navigation bar.
2. On the upper right u will see "Details" click it then find the word "flash", and you will see something like this:
Flash (3 files) - Version: 11,3,300,257
Shockwave Flash 11.3 r300
Name: Shockwave Flash
Description: Shockwave Flash 11.3 r300
Version: 11,3,300,257
3. I say again, this worked for me on Chrome. The 3 files i have, two of them are Version 11,3,300,257 and one is 11.2.31.144
4. Simply disable the lates version 11.3 and enable the previous version 11.2
I hope this helps.
Message was edited by: AndrewPAM -
Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer
There's a good chance that this is a known issue. We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/
-
I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
How can i "rip" a part of a DVD that i bought from a vendor, when I went scuba diving recently? My goal is to insert the scuba clip into my Imovie project, which I am developing in my Macbook Pro. (This Mac is about 3 yearsold now)
I ,of course, will give credit to the company that produced the scuba DVD.
I read the posts, and Appleman1958, vernon Alexander,and Samhaque have had experience with this issue.
Which solution do you recommend for me? My ultimate goal is to create a DVD that includes snippets of a family trip.
thank you for your input here.
Moshe PipickLet's assume that such a 'holiday video' does not have copy protection:
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7. -
Hello, I have 64bit arch linux on my laptop. Everything was fine until some time ago when I made an upgrade after quite some time and after that I started having some small problems with sound.
1. The headphones stopped working when I plugged them in. I found out that in order for them to work I have to run the ESD daemon. That wasn't necessary some time ago. But then again if the ESD daemon is running and I plug off the headphones the laptop's speakers won't work.
2. Lately a problem appeared concerning multiple sound sources. If I have my browser running and youtube is open then I get no sound from amarok. I have to close them both and open amarok first then chrome. Amarok plays just fine but if I open a youtube tab there's no sound at all.
I have to admit it's kind of irritating having these. Any ideas?
Thank you in advanceI suppose it's not good that I don't have either of these files now, is it?
[verminoz@verminoz-lt ~]$ cat ~/.asoundrc
cat: /home/verminoz/.asoundrc: No such file or directory
[verminoz@verminoz-lt ~]$ cat /etc/asound.conf
cat: /etc/asound.conf: No such file or directory -
Problems with sound from connetion
Does anyone else have any problems with sounds when taking? It sounds like it did years ago when the connection was bad. But now it´s 2014!
I havent had this problems before so i guess that it came after the latest upgrade. It doesnt sound in every call i make and not all the time. It also sounds with different strenght.
Shall i try to change something before visiting Apple store?Does anyone else have any problems with sounds when taking? It sounds like it did years ago when the connection was bad. But now it´s 2014!
I havent had this problems before so i guess that it came after the latest upgrade. It doesnt sound in every call i make and not all the time. It also sounds with different strenght.
Shall i try to change something before visiting Apple store? -
Problem with sound on iPod Photo
I am having a problem with sound on an iPod Photo. You can hear music for about 5 seconds and then it is silent. I have to turn off the iPod for several seconds. When I turn it back on it will have sound again for about 5 seconds before going silent again. Has anyone else expeirenced this? Any ideas what may be happening
Try these steps one at a time.
The Five Rs.
If nothing helps, you can arrange online service here. This may be more than just a software problem.
Service request. -
Problem with sound on HP Probook 6560b
Problem with sound on HP Probook 6560b
my laptop problem is audio driver but it works by hearphone,how can lisen without hearphone?
-
HT1657 I am having problems with sound in my rental movies
We rent movies all the time but lately we are having problems with sound for our movie rentals. We watch the first half hour without a problem than the voice is choppy all the time. Sometimes it is good for five minutes than noting for a while. We have tried everything we could think of with no avail. I could see one movie but the last 5 or so have been the same. Done trying we need to fix this! Help! Any ideas?
First try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
If you still have the same issue, it's possible that something is lodged in the earphone jack. This can cause the iPad to think earphones are plugged in when they are not. Use a vacuum to try to suck any dust, lint or other foreign matter from the jack. If that still doesn't work, try CAREULLY using a toothpick. -
Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help
Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
[SOLVED]Problem with sound in HDMI
Hello good society of Arch
Now I have problems with sound from HDMI. I use Arch as an tvPc, wasting movies and tv shows on it. I use ALSA and it works well, except of a few files that I have, then there is picture but sound is either twisted or not played at all. It does not matter whether I use vlc or mplayer, I'm experiencing the same problem.
I have not found anything about this with google, other problems have been either hdmi sound working or not, not like it is with me, sometimes it works and sometimes it don't.
I know that the files are ok, I can play them in anther pc I have (also using Arch on that pc).
Does anybody know what the problem might be? What do I have to look at to find out what the problem is? This have been like this for some time now, but I haven't looked into it before, because I don't use TV that muts, but the wife does and when she stats blaming Arch, I have too do something about it.
I have never encountered problem with Arch that i cant solve by using this forum and google
Thanks
Last edited by Vaski (2010-08-21 01:08:42)cleanrock wrote:I noticed i got no audio over hdmi on some video file which had a low audio bitrate, i solved it by resampling the sound to 48000 in ~/.mplayer/config :
af=resample=48000
I will look at this when i come home from work, thanks.
nTia89 wrote:have you already read our wiki ?
Yes i have, and sound is working, well most of the time.
Maybe you are looking for
-
Passing result list from Contact search to Target group
Hi, I have to pass the result list of Contact serch(BP_CONT_SEARCH) to Target group creation component(SEGED_TG). Can you give me the steps that I need to follow. Note: Here the contact structure is different in each component. Thanks.
-
Can't see databases in Hyperion Workspace or Web Analysis 9.3.1
Hi, I installed all the components of reporting and analysis (services, ui services, client). I had also installed Shared services, created a user and created an essbase database/application. However, when I log on to the Workspace, I can't see any d
-
Error when Installing Oracle XE on Suse Linux 10.0
I am installing Oracle xe on Suse Linux 10.0. I get following error. gthomas@linux:~/oraclexe> rpm -ivh oracle-xe-10.2.0.1-0.1.i386.rpm error: cannot get exclusive lock on /var/lib/rpm/Packages error: cannot open Packages index using db3 - Operation
-
Need help on object array, please.
Hello. I'm trying to write a program that stores student id numbers and their names into an array, and then prints them in numerical order. What I did was create an object called DSCC and put it in an array, but I'm having problems. Everytime I run t
-
I'm trying to trouble shoot some connection issues and want to upgrade my WRE54G Expander's firmware. I've downloaded the firmware file and the setup wizard, but steps provided by the support site say that I need to connect to my range expander via