Problems with sound from connetion

Does anyone else have any problems with sounds when taking? It sounds like it did years ago when the connection was bad. But now it´s 2014!
I havent had this problems before so i guess that it came after the latest upgrade. It doesnt sound in every call i make and not all the time. It also sounds with different strenght.
Shall i try to change something before visiting Apple store?

Similar Messages

Problems with sound from Nomad II Juxe

Recently I have been having sounds problems with my Nomad II juxebox. Every couple of seconds the sounds spikes or just skips, making it sound sometimes as If I am listening to a shaking CD player without antishock. However, my Juxebox player is at rest, so shaking can't be the cause. Also, interestingly enough, it seems that only the sound from the head phone jack spikes randomly, but the sound from the output jack at the back sounds fine!! Which makes me assume that it's not a hard dri've, or memmory reading problem either. So what is it then? Any Ideas?
Thanks,
Joseph

Recently I have been having sounds problems with my Nomad II juxebox. Every couple of seconds the sounds spikes or just skips, making it sound sometimes as If I am listening to a shaking CD player without antishock. However, my Juxebox player is at rest, so shaking can't be the cause. Also, interestingly enough, it seems that only the sound from the head phone jack spikes randomly, but the sound from the output jack at the back sounds fine!! Which makes me assume that it's not a hard dri've, or memmory reading problem either. So what is it then? Any Ideas?
Thanks,
Joseph

Problems with sound from external speakers after iOS 5.0.1 update

Have others experienced problems with external speakers on the Iphone 4 after iOS 5.0.1 update? My phone no longer rings, sounds when i receive a text message, sounds alarm, etc. Vibrate works fine and when i plug in headphones I can hear music through the headphones. Any fixes for this?

Hi Guys,
I have post eariler on another forum and I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed. You probably have the problem when you use youtube or your music external speaker that there is no volume bar and no sound.   I have had the same problem But I need to happily say that I now have the fix!!!! This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along. I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed. some worked for an hour but then failed. hours of my life that I will never get back.   but since I have learnt this is not a IO5 problem but a hardware issue! ... and in paticualar is has to do with your bottom connection. Your phone is thinking it is docked all the time.
To fix the no sound problem what you need is...
1. a torch
2. a tooth brush
3. methalated spirits
4. a butter knife
Step 1.
get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there.   all that need to be removed! everything! it might look clean but still thats ok go to step 2.
step 2.
Turn on your music app and put the speakers on! If your phone is like mine it should not work. you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound.   its important you try and run the speakers as this will show you that it is a hardware problem.
step 3.
Dip your tooth brush into some methated sprits.   then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone. work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
(As you bushing you should notice the volume bar come back on or off as you scub.   This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off.   but once I cleaned it this still didn't fix the problem...)
Step 4.
Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone. Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again. slide it back and forward. Now the area of interest is about 2/3 along the connection plate to the right.   This is the area that has the infomation sent when your iphone thinks its docked.
This has worked for me and I have not had a problem since I did this 2 weeks ago.   I have since learnt that the new IOS 5 has activated a different part of the bottom conectors. if you have been using dodgy connectors or unapproved apple cables (as I was) any damage or hair and dirt on the terminal this is effecting it. Try it.   just remember if you can do something external to your phone then there lies the problem.
Hope this works for your phone as it did for mine.
Cheers

Problem with sound from internal speakers

I have rescued an 867 hz TiBook from the trash heap. This machine was being discarded because it wouldn't wake up (just did this red, blue, yellow flashing thing, so it had to be restarted everytime it went to sleep) and because the internal speakers had stopped working. I took off the keyboard and flashed the pram, reset everything, wiped the hard drive and installed Leopard. This seems to have fixed the sleep issue but there is still no sound from the speakers.The headphone jack works fine, the built-in mic works and there IS an option for internals as the output in prefs, so it's not the headphone jack problem I've read about. I've searched and searched but I can't seem to find a solution that works... anyone have any ideas?

Hi Mr. Waters,
Welcome to Apple Discussions.
You may want to at least follow the wires back from the speakers and see that they're connected, but it's likely the sound card which is unfortunately soldered onto the logic board. If so, the repair would mean replacing the logic board, rather expensive and not easy. Still a nice find for free.

[SOLVED]Problem with sound in HDMI

Hello good society of Arch
Now I have problems with sound from HDMI. I use Arch as an tvPc, wasting movies and tv shows on it. I use ALSA and it works well, except of a few files that I have, then there is picture but sound is either twisted or not played at all. It does not matter whether I use vlc or mplayer, I'm experiencing the same problem.
I have not found anything about this with google, other problems have been either hdmi sound working or not, not like it is with me, sometimes it works and sometimes it don't.
I know that the files are ok, I can play them in anther pc I have (also using Arch on that pc).
Does anybody know what the problem might be? What do I have to look at to find out what the problem is? This have been like this for some time now, but I haven't looked into it before, because I don't use TV that muts, but the wife does and when she stats blaming Arch, I have too do something about it.
I have never encountered problem with Arch that i cant solve by using this forum and google
Thanks
Last edited by Vaski (2010-08-21 01:08:42)

cleanrock wrote:I noticed i got no audio over hdmi on some video file which had a low audio bitrate, i solved it by resampling the sound to 48000 in ~/.mplayer/config :
af=resample=48000
I will look at this when i come home from work, thanks.
nTia89 wrote:have you already read our wiki ?
Yes i have, and sound is working, well most of the time.

HT1657 I am having problems with sound in my rental movies

We rent movies all the time but lately we are having problems with sound for our movie rentals. We watch the first half hour without a problem than the voice is choppy all the time. Sometimes it is good for five minutes than noting for a while. We have tried everything we could think of with no avail. I could see one movie but the last 5 or so have been the same. Done trying we need to fix this! Help! Any ideas?

First try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
If you still have the same issue, it's possible that something is lodged in the earphone jack. This can cause the iPad to think earphones are plugged in when they are not. Use a vacuum to try to suck any dust, lint or other foreign matter from the jack. If that still doesn't work, try CAREULLY using a toothpick.

Problem with sound in games requiring quicktime

I recently purchased CSI 1. I installed the game and the latest version of quicktime player. As soon as the game starts and the first character starts talking the game pauses as if loading and then plays for a second and pauses again for a few seconds. This intermittent sound problem makes it impossible to play the game as the freezing stops everything from functioning. I tried another game that requires quicktime to be installed and that game is pausing the same. Has anyone else had this problem? I have all the latest drivers installed for Vista. Any help would be much appreciated.

Do you get any problems with sound in other (older) games? You didn't mention which drivers in particular you updated, but make sure the graphics card's ones are included.
With regards to Half Life 2, check out this page on the Steam site:
http://steampowered.custhelp.com/cgi...wYWdlPTE*&p_li=
If that page doesn't open correctly for you, just go to http://www.steampowered.com , then Support, and select Half Life 2 in the product list. It should be one of the first cases listed.
Cat

Problems with sound engine

Hello, I have 64bit arch linux on my laptop. Everything was fine until some time ago when I made an upgrade after quite some time and after that I started having some small problems with sound.
1. The headphones stopped working when I plugged them in. I found out that in order for them to work I have to run the ESD daemon. That wasn't necessary some time ago. But then again if the ESD daemon is running and I plug off the headphones the laptop's speakers won't work.
2. Lately a problem appeared concerning multiple sound sources. If I have my browser running and youtube is open then I get no sound from amarok. I have to close them both and open amarok first then chrome. Amarok plays just fine but if I open a youtube tab there's no sound at all.
I have to admit it's kind of irritating having these. Any ideas?
Thank you in advance

I suppose it's not good that I don't have either of these files now, is it?
[verminoz@verminoz-lt ~]$ cat ~/.asoundrc
cat: /home/verminoz/.asoundrc: No such file or directory
[verminoz@verminoz-lt ~]$ cat /etc/asound.conf
cat: /etc/asound.conf: No such file or directory

Problems with sound only on video not audio files

Hello
My first post here. I am having some problems with sound on video files. It is almost no sound, and the sound that is there is only crackling noise. I have the Creative X-treme audio soundcard and have installed the Vista codec pack and the K-lite codec pack. I have also updated the soundcard driver. The thing is that these problems only occure on video files, not on audio files such as mp3's. Can anyone help me?

About alsa dmix, and for the record:
On an Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, the following are my finding about
quality/cpu when mixing two streams at 44khz:
a snippet from my .asoundrc
#converter "samplerate_best" # perfect: 16%cpu, maybe overkill
#converter "samplerate_medium" # almost perfect: 6%cpu
#converter "samplerate" # good: 4%cpu, definitely usable
#converter "samplerate_linear" # bad: 2%cpu, way better than default wine resampler
#converter "samplerate_order" # very bad: 2%cpu, like the default wine resampler
Here is the reference topic: https://bbs.archlinux.org/viewtopic.php?pid=942724
I may be wrong, but in an opensource world (code reusing), i really doubt pulseaudio could lead to better quality/cpuuse tradeoff.
Pulseaudio, being just another layer atop of alsa, could only lead to higher cpu usage.
Last edited by kokoko3k (2013-11-11 15:33:41)

Problems with sound in Flash

I recently updated a sound file in a flash movie. I had some aif files that I updated with a mp3 sound file. Within my movie there is a script for a replay button. It plays back fine when I play it, but when I press the replay button, it doesn't replay the sound, only the movie. Hope I'm making sense, any ideas why I get no sound when I replay the movie?

Sorry about that, I'm a bit of a newborn at this so I may say something stupid from time to time.
As I said, "nav" is the image for the replay button
The code for level0 is this
_level0.doTimer();
The rest of the code is
_level0.controlsDisabled = true;
//as : Frame 1299
stop();
// what's nav. is that the movieclip the "replays"?
nav.play();
// what's _level0.doTimer() (copy and paste that code)
_level0.doTimer();
_level0.controlsDisabled = true;
From: kglad <[email protected]>
To: Ashton Matthews <[email protected]>
Sent: Tuesday, July 5, 2011 10:16:34 AM
Subject: Problems with sound in Flash
i didn't suggest any code. i only posted questions and you answered only one and that answer didn't help.

Problem with sound on iPod Photo

I am having a problem with sound on an iPod Photo. You can hear music for about 5 seconds and then it is silent. I have to turn off the iPod for several seconds. When I turn it back on it will have sound again for about 5 seconds before going silent again. Has anyone else expeirenced this? Any ideas what may be happening

Try these steps one at a time.
The Five Rs.
If nothing helps, you can arrange online service here. This may be more than just a software problem.
Service request.

Problem with sound on HP Probook 6560b

Problem with sound on HP Probook 6560b

my laptop problem is audio driver but it works by hearphone,how can lisen without hearphone?

Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Problem with sound in games

Hi all welcome as you can see I'm new to your forum. So I have a problem as it concerns the sound in games.
Namely, I bought a Creative Headset HS-800 Fatality everything good in listening to music, etc.
But when I go to the game, I turned the sound (someone shoots to the left I hear him right, and vice versa.)
Yes, in all games but mostly it is felt such a battlefiel or call of duty.
At first I thought that this is the fault of my sound card but it's not because I was in a mate and in him was the same ... This recently replaced the computer and the same thing.
I came across the net to reverse the channels, but unfortunately I do not know how to set it up.
Here, the data on my computer:
Sound Card Speakers (Realtek High Definitie
Sound Card Realtek Digital Output (Realtek
Sound Card Realtek Digital Output (RCA) (Re
Operating system: Windows 7 64 bit
I would add that in tests Realtek win7 and everything is fine.
Regards and please help as soon as possible.

Do you get any problems with sound in other (older) games? You didn't mention which drivers in particular you updated, but make sure the graphics card's ones are included.
With regards to Half Life 2, check out this page on the Steam site:
http://steampowered.custhelp.com/cgi...wYWdlPTE*&p_li=
If that page doesn't open correctly for you, just go to http://www.steampowered.com , then Support, and select Half Life 2 in the product list. It should be one of the first cases listed.
Cat

Windows 8.1 Problem with games from windows store.

I've got a problem with games from windows store. The installation is going well without any problems, however when I try to open it it's loading and then it turns off. The same problem happens when I try to use Games for Windows. I've use a sfc scan and
it shows some errors but unfortunately it cannot fix them. Should I share the CBS log or find the solution somewhere else? I hope you help, best regards.

Hi,
According to my experience, the problem like store game app open failed probably caused by hardware driver. such as Audio and Graphic driver. So, first of all, please try to reinstall these two driver to fix this problem for test.
In addition, for SFC scan failed problem, it can be caused by many reasons, I would suggest you use another command to fix your system for test.
Dism /Online /Cleanup-Image /ScanHealth
Also you can test SFC command in Windows 8.1 safe mode.
Thirdly, if problem persists, please check Event Viewer, generally speaking, it would record the app open failed events.
Roger Lu
TechNet Community Support

Problems with sound from connetion

Similar Messages

Maybe you are looking for