Problems with sound when Boom v 1.5 is on.

When I updated boom to v 1.5 for mountain lion, there would be no sound on my computer. I can fix this by going into system preferences -> sounds and select the internal speakers and this would solve the problem, but after some time goes by, the sound is gone again and I would have to repeat those steps again to make it work. I know this is a boom problem because when I uninstall boom my sound always works. Can anyone help?
Thanks,
Jerry

jerrbear91 wrote:
I know this is a boom problem because when I uninstall boom my sound always works. Can anyone help?
Jerry,
I think it is a Boom issue.
I've had it occasionally myself, though I can't really figure out what circumstances cause it.
I think for now the System Preferences>Sound workaround is the best solution.
Matt

Similar Messages

  • Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
    You are likely to get poor connections and dropping out.
    If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
    There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
    http://forumhelp.dyndns.info/networking/powerline3.jpg
    I will monitor the subject line of this thread, should you want to post any more information.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Problems with sound when I embed multiple videos on auto play into a composition widget.

    I am having problems with the sound when I embed multiple videos on autoplay into a composition widget in Muse. It sounds as if they are all playing at once. Note that within the compostion widget, options - the auto play is disabeled.
    I've a television set that has buttons below and I want the users to flick through the channels.
    I need the oriantaion to be stacked as they're contained within a frame (the tv). I have tried the lightbox view (which at first seamed to solve the problem), but unfortunately the position, orientation moves when shown on different divises. It Had to be quite precise as I was ovelaying the original frame within the light box.
    Could you please help me with this?
    Also, I wanted to let you know that I think this software is amazing. Great job!
    here is the link:
    http://albanconnell.com/moving-image.html

    Hi Alban,
    I see what you are seeing. Could you send your file so I can investigate more? Send it to [email protected], with a link to this thread in the message body. If the file is >20mb, our email system cannot handle it so use a service like Adobe SendNow.
    Thanks,
    Sam

  • Problems with sound, when connected to soundsystem

    Hello everyone!
    I have problems when my iMac 24" is connected to my soundsystem and plasma TV. The sound comes out perfect from the iMac's jack port, but along with the sound (from a movie or song etc) is a VERY annoying wholing sound.
    I have narrowed the source of this wholing sound; it comes from the iMac (although i do not know which part). When I put my ear very close to the iMac I can here the exact same wholing sound; so my soundsystem is (of course) increasing the sound, along with this wholing sound.
    My question: is there a way to remove this unwanted wholing sound? I hope there is a way - thanks!

    Ignoring what the sound sounds like at th moment, I'm confused.  Are you saying  you think the sound is coming from the machine, but not not its internal speakers, and only when you have the sound system plugged in? 
    And I don't understand the phrase "it's like the Jack stick is too sensitive or something".
    The only moving parts in a imac are its fan and hard drive.  Initially I was going to say I think it is the hard drive when you said "very high-pitched".  But then you added the rest of that post.
    I doubt now it's the hard drive since you say you only hear the sound with the sound system plugged in, but just in case, here's a link to a bunch of hard drive sounds.  See if any of those match what you are hearing.
    I guess another theory is that with the sound system plugged in the fan revs up.  Not sure why it would do that though since the machine should really not have any additional load simply because you are using the line out jack.  I thought I would mention it anyhow because I am running out of ideas.

  • Problem with sound when import from Premiere into After Effects

    Hi!
    I imported a sequence from a Premiere Pro project using File -> Import -> Adobe Premiere Project...
    The video in the sequence showed up in the After Effects project as a composition.  However, the composition did not include the sound from the sequence!  Is there a way to keep the sound from the sequence upon import into After Effects?
    Thanks

    i`m sorry about the screenshot size, but i could only upload pics with 605 px width.
    Nevertheless it seems that you saved my day. looks like it was all about the scale to framesize thing.
    thank you so much!!!!

  • Problems with sound when upgrading to 3.1.2.

    Hi
    I have a 2nd Gen iPod Touch and I have just upgraded from 3.0 to 3.1.2. Everything has gone smoothly, but I now have no sounds coming from the iPod. I have reloaded the firmware upgrade and I still have no sound. I have also played with the sound settings (volume lock, sound check) with no luck.
    Any ideas?
    Thanks

    I've just tried upgrading to 3.1.3. and I still have no sound coming from the iPod. Has anyone found a solution to this yet? It's getting quite annoying that I have to downgrade my iPod to 3.0 each time to gain sound and even more annoying not being able to contact Apple over this matter.

  • Problems with sound when using adobe flash player

    It seems that we have some issues with the sounds of the uploaded videos. I have uploaded some videos directly on our website http://yoananin.com/ but many people complained that  they can not hear the sound  Can anyone help?

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/thread/1195540

  • Problems with sound when closing the lid (MBP and Yosemite)

    Hi
    i have a MBP and Yosemite.
    Before the update i could close the lid when watching movies on the mac and connecting to HDMI to my TV and the sound and images worked OK ( i uses insomnia X for being able to close the lid)
    After the update, when i close the lid the images works but the sound doesn't come out from the TV but from the mac.
    it was working before and not anymore.. anybody knows what this ca be?
    thanks

    dogan100 
    First time around, they gave me an apple tv for the inconvenience........ I will keep you guys posted once I find out more from the Apple Store.
    Free Apple TV eh? Thats rather outstanding for a creaking on the plastic hinge cover.
    Nice video, the "old door" sound of soft creaking plastic.    Thats not the (2 of them) hinge sound, which (ive only heard one make the noise, on an old air) is a 'grrr' sound of the alloy creating a rubbing noise.
    Yes, find out what the Apple store says.  Pretty obviously the plastic hinge cover, which does nothing, is cosmetic and doesnt affect anything.
    There could be a crack in the hinge cover I cant see that obviously. Another option is the cover isnt snapped into place correctly.
    I wouldnt worry about it, its ultimately nothing, but youll get it serviced and fixed when you get to Apple.
    Im shocked they just outright gave you a free AppleTV, thats a great 'deal' (meaning free), and top notch from Apple
    heres the hinge cover pic:

  • Problems with sound from connetion

    Does anyone else have any problems with sounds when taking? It sounds like it did years ago when the connection was bad. But now it´s 2014!
    I havent had this problems before so i guess that it came after the latest upgrade. It doesnt sound in every call i make and not all the time. It also sounds with different strenght.
    Shall i try to change something before visiting Apple store?

    Does anyone else have any problems with sounds when taking? It sounds like it did years ago when the connection was bad. But now it´s 2014!
    I havent had this problems before so i guess that it came after the latest upgrade. It doesnt sound in every call i make and not all the time. It also sounds with different strenght.
    Shall i try to change something before visiting Apple store?

  • Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

    Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

    Try A and B
    (A) Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
    (B) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Problem with sound on iPod Photo

    I am having a problem with sound on an iPod Photo. You can hear music for about 5 seconds and then it is silent. I have to turn off the iPod for several seconds. When I turn it back on it will have sound again for about 5 seconds before going silent again. Has anyone else expeirenced this? Any ideas what may be happening

    Try these steps one at a time.
    The Five Rs.
    If nothing helps, you can arrange online service here. This may be more than just a software problem.
    Service request.

  • HT1657 I am having problems with sound in my rental movies

    We rent movies all the time but lately we are having problems with sound for our movie rentals.  We watch the first half hour without a problem than the voice is choppy all the time.  Sometimes it is good for five minutes than noting for a while.  We  have tried everything we could think of with no avail.  I could see one movie but the last 5 or so have been the same.  Done trying we need to fix this!  Help!  Any ideas?

    First try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
    If you still have the same issue, it's possible that something is lodged in the earphone jack. This can cause the iPad to think earphones are plugged in when they are not. Use a vacuum to try to suck any dust, lint or other foreign matter from the jack. If that still doesn't work, try CAREULLY using a toothpick.

  • [SOLVED]Problem with sound in HDMI

    Hello good society of Arch
    Now I have problems with sound from HDMI. I use Arch as an tvPc, wasting movies and tv shows on it. I use ALSA and it works well, except of a few files that I have, then there is picture but sound is either twisted or not played at all. It does not matter whether I use vlc or mplayer, I'm experiencing the same problem.
    I have not found anything about this with google, other problems have been either hdmi sound working or not, not like it is with me, sometimes it works and sometimes it don't.
    I know that the files are ok, I can play them in anther pc I have (also using Arch on that pc).
    Does anybody know what the problem might be? What do I have to look at to find out what the problem is? This have been like this for some time now, but I haven't looked into it before, because I don't use TV that muts, but the wife does and when she stats blaming Arch, I have too do something about it.
    I have never encountered problem with Arch that i cant solve by using this forum and google
    Thanks
    Last edited by Vaski (2010-08-21 01:08:42)

    cleanrock wrote:I noticed i got no audio over hdmi on some video file which had a low audio bitrate, i solved it by resampling the sound to 48000 in ~/.mplayer/config :
    af=resample=48000
    I will look at this when i come home from work, thanks.
    nTia89 wrote:have you already read our wiki ?
    Yes i have, and sound is working, well most of the time.

  • Problem with sound in games

    Hi all welcome as you can see I'm new to your forum. So I have a problem as it concerns the sound in games.
    Namely, I bought a Creative Headset HS-800 Fatality everything good in listening to music, etc.
    But when I go to the game, I turned the sound (someone shoots to the left I hear him right, and vice versa.)
    Yes, in all games but mostly it is felt such a battlefiel or call of duty.
    At first I thought that this is the fault of my sound card but it's not because I was in a mate and in him was the same ... This recently replaced the computer and the same thing.
    I came across the net to reverse the channels, but unfortunately I do not know how to set it up.
    Here, the data on my computer:
    Sound Card Speakers (Realtek High Definitie
    Sound Card Realtek Digital Output (Realtek
    Sound Card Realtek Digital Output (RCA) (Re
    Operating system: Windows 7 64 bit
    I would add that in tests Realtek win7 and everything is fine.
    Regards and please help as soon as possible.

    Do you get any problems with sound in other (older) games? You didn't mention which drivers in particular you updated, but make sure the graphics card's ones are included.
    With regards to Half Life 2, check out this page on the Steam site:
    http://steampowered.custhelp.com/cgi...wYWdlPTE*&p_li=
    If that page doesn't open correctly for you, just go to http://www.steampowered.com , then Support, and select Half Life 2 in the product list. It should be one of the first cases listed.
    Cat

  • Problem with sound since update with 10.4.9 (no problem with with 10.4.7)

    Since i update with 10.4.9, I observe some problems with sound that I don't observe with 10.4.7 on an old partition:
    1. no more sound when opening excel file with office
    2. no more sound with files .rm opened with realplayer
    3. no more sound with files .wmv opened with lecteur windows media player.
    Ths files are opened normally with 10.4.7 that I conserved on an other partition.

    Welcome to Apple Discussion!
    This is a well known bug with the optical audio based Macs with a very simple fix:
    http://docs.info.apple.com/article.html?artnum=300832
    Hopefully that's the one you encountered.

Maybe you are looking for

  • Can't Install QuickTime on Windows 8 64 bit

    When i try to install iTunes, or QuickTime, i get: error occurred during installation of assembly microsoft.VC80.CRT.type="win32", version="8.0.50727.6195", publicKeyToken="1fc8b3b9a1e18e3b".processorArchitecture="x86"" HRESULT: 0x80070422 I notice t

  • UnZip Paylaod....

    HI All, I am doing on File -> File Scenario. My Source File is a ZIP File(contains .txt file with tab delimeter). I need to unzip the file and sent to the target system. Currently I developed the scenario using payloadZipBean. If the ZIP File contain

  • Mapping issue: link related items together based on a key

    Hi guys, I have a mapping issue. I have a source structure like this: <ad>   <key>   <value1> </ad> <ad>   <key2>   <value2> </ad> <bx>   <key>   <value3> </bx> <bx>   <key2>   <value4> </bx> <bx>   <key2>   <value5> </bx> I need to get this: <kitem>

  • Can I use a virgin mobile internet USB device with OS X?

    Is there a way to use the USB virgin mobile internet device with OX M??

  • My Windows ME problem

    So I got a Windows ME desktop the other day, and everythng went fine until today. I shut down the computer, and the only thing I see is the screen saying "HP invent" and I can't get past it. I plugged the keyboard and mouse in different slots, and th