Problems with sound when upgrading to 3.1.2.

Hi
I have a 2nd Gen iPod Touch and I have just upgraded from 3.0 to 3.1.2. Everything has gone smoothly, but I now have no sounds coming from the iPod. I have reloaded the firmware upgrade and I still have no sound. I have also played with the sound settings (volume lock, sound check) with no luck.
Any ideas?
Thanks

I've just tried upgrading to 3.1.3. and I still have no sound coming from the iPod. Has anyone found a solution to this yet? It's getting quite annoying that I have to downgrade my iPod to 3.0 each time to gain sound and even more annoying not being able to contact Apple over this matter.

Similar Messages

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problem with permissions when upgrading to Yosemite...

I have twice tried to upgrade to Yosemite with the same results each time. Once the installation completes and it goes through the final reboot to start the system, immediately upon start-up, it shows a dialogue box that says something along the lines of, "Yosemite needs to repair your Library." I do authorize it to do a repair, but it seems nothing actually happens.
Yet another problem is also immediately evident at startup, and that is that several of my folders are irrevocably locked..."I don't have permission." This includes folders in my User Library, a folder on my Desktop which is vital to my work, and the Downloads folder. If I try to go to the Get Info area to unlock it, in the Permissions area it says "Fetching", to see who has permissions, but it never stops Fetching. And if I click on the "+" to add a user permission, it hangs and necessitates a hard restart.
Also, when opening Safari, it can't find Safari's keychain or can't access it, and it asks me to reset to default settings.
I'm thinking this all has to do with a bug in the Permissions, but I don't know where the bug is or how to address it. I have gone back to Mavericks twice now, and I don't see any problems with the permissions on the Downloads file, for instance. Also, it seems entirely random as to which files are locked and which aren't, which adds to the confusion.
Any help would be appreciated.

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions

Problems with pacman when upgrading to xorg7

I decided to try and update from xorg-11R6.8 to 7 tonight, after hesitating for a while. I saw all the bug reports and problem threads, and I still can't understand why something that results in so many bugs has been released. It doesn't seem to comply with the KISS principle, either, but who am I to judge?
Anyway, my problem is this:
When I try to install the xorg components, I get the following message in my terminal. After checking the packe intergrities, it'll go to install the first package and then show this:
load_pkg: missing package name in /var/cache/pacman/pkg/libxkbfile-1.0.1-1.pkg.tar.gz.
After removing xorg-11R6.8, it will do this for any package I try to install, whether part of the new modular xorg or not.
If I do a "pacman -U /var/cache/pacman/pkg/xorg-11R6.8.2-6.pkg.tar.gz", it works fine again.
I've read through the Xorg7 wiki entry and there's no reference to this problem.
Any way to solve it?
Thanks in advance.

That didn't really help, either.
Apart from a fresh install, is there anything I can do to just sort out all these stupid problems in one go?
When I try and upgrade to xorg7, I get all these messages about missing object files and libraries, complaints from /sbin/ldconfig about the nvidia module being empty, all this other crap too; it seems like a different thing broken every time. When I downgrade to xorg-6.8, fluxbox comes up and works, but when I go to upgrade anything else with pacman, I just get the load_pkg errors or whatever else.
I've tried editing my /etc/X11/xorg.conf file to the new xorg7 paths when upgrading to xorg7, but it makes no difference.
I don't understand how something that's supposed to simplify Arch could break things for so many people, =

Problems with sound when I embed multiple videos on auto play into a composition widget.

I am having problems with the sound when I embed multiple videos on autoplay into a composition widget in Muse. It sounds as if they are all playing at once. Note that within the compostion widget, options - the auto play is disabeled.
I've a television set that has buttons below and I want the users to flick through the channels.
I need the oriantaion to be stacked as they're contained within a frame (the tv). I have tried the lightbox view (which at first seamed to solve the problem), but unfortunately the position, orientation moves when shown on different divises. It Had to be quite precise as I was ovelaying the original frame within the light box.
Could you please help me with this?
Also, I wanted to let you know that I think this software is amazing. Great job!
here is the link:
http://albanconnell.com/moving-image.html

Hi Alban,
I see what you are seeing. Could you send your file so I can investigate more? Send it to [email protected], with a link to this thread in the message body. If the file is >20mb, our email system cannot handle it so use a service like Adobe SendNow.
Thanks,
Sam

Problems with sound, when connected to soundsystem

Hello everyone!
I have problems when my iMac 24" is connected to my soundsystem and plasma TV. The sound comes out perfect from the iMac's jack port, but along with the sound (from a movie or song etc) is a VERY annoying wholing sound.
I have narrowed the source of this wholing sound; it comes from the iMac (although i do not know which part). When I put my ear very close to the iMac I can here the exact same wholing sound; so my soundsystem is (of course) increasing the sound, along with this wholing sound.
My question: is there a way to remove this unwanted wholing sound? I hope there is a way - thanks!

Ignoring what the sound sounds like at th moment, I'm confused. Are you saying you think the sound is coming from the machine, but not not its internal speakers, and only when you have the sound system plugged in?
And I don't understand the phrase "it's like the Jack stick is too sensitive or something".
The only moving parts in a imac are its fan and hard drive. Initially I was going to say I think it is the hard drive when you said "very high-pitched". But then you added the rest of that post.
I doubt now it's the hard drive since you say you only hear the sound with the sound system plugged in, but just in case, here's a link to a bunch of hard drive sounds. See if any of those match what you are hearing.
I guess another theory is that with the sound system plugged in the fan revs up. Not sure why it would do that though since the machine should really not have any additional load simply because you are using the line out jack. I thought I would mention it anyhow because I am running out of ideas.

Problems with sound when Boom v 1.5 is on.

When I updated boom to v 1.5 for mountain lion, there would be no sound on my computer. I can fix this by going into system preferences -> sounds and select the internal speakers and this would solve the problem, but after some time goes by, the sound is gone again and I would have to repeat those steps again to make it work. I know this is a boom problem because when I uninstall boom my sound always works. Can anyone help?
Thanks,
Jerry

jerrbear91 wrote:
I know this is a boom problem because when I uninstall boom my sound always works. Can anyone help?
Jerry,
I think it is a Boom issue.
I've had it occasionally myself, though I can't really figure out what circumstances cause it.
I think for now the System Preferences>Sound workaround is the best solution.
Matt

Problem with sound when import from Premiere into After Effects

Hi!
I imported a sequence from a Premiere Pro project using File -> Import -> Adobe Premiere Project...
The video in the sequence showed up in the After Effects project as a composition. However, the composition did not include the sound from the sequence! Is there a way to keep the sound from the sequence upon import into After Effects?
Thanks

i`m sorry about the screenshot size, but i could only upload pics with 605 px width.
Nevertheless it seems that you saved my day. looks like it was all about the scale to framesize thing.
thank you so much!!!!

Problems with sound when using adobe flash player

It seems that we have some issues with the sounds of the uploaded videos. I have uploaded some videos directly on our website http://yoananin.com/ but many people complained that they can not hear the sound Can anyone help?

To give you any useful advice, I'm going to need to know more about your computer and browser:
https://forums.adobe.com/thread/1195540

Problems with sound when closing the lid (MBP and Yosemite)

Hi
i have a MBP and Yosemite.
Before the update i could close the lid when watching movies on the mac and connecting to HDMI to my TV and the sound and images worked OK ( i uses insomnia X for being able to close the lid)
After the update, when i close the lid the images works but the sound doesn't come out from the TV but from the mac.
it was working before and not anymore.. anybody knows what this ca be?
thanks

dogan100
First time around, they gave me an apple tv for the inconvenience........ I will keep you guys posted once I find out more from the Apple Store.
Free Apple TV eh? Thats rather outstanding for a creaking on the plastic hinge cover.
Nice video, the "old door" sound of soft creaking plastic. Thats not the (2 of them) hinge sound, which (ive only heard one make the noise, on an old air) is a 'grrr' sound of the alloy creating a rubbing noise.
Yes, find out what the Apple store says. Pretty obviously the plastic hinge cover, which does nothing, is cosmetic and doesnt affect anything.
There could be a crack in the hinge cover I cant see that obviously. Another option is the cover isnt snapped into place correctly.
I wouldnt worry about it, its ultimately nothing, but youll get it serviced and fixed when you get to Apple.
Im shocked they just outright gave you a free AppleTV, thats a great 'deal' (meaning free), and top notch from Apple
heres the hinge cover pic:

Problems with sound from connetion

Does anyone else have any problems with sounds when taking? It sounds like it did years ago when the connection was bad. But now it´s 2014!
I havent had this problems before so i guess that it came after the latest upgrade. It doesnt sound in every call i make and not all the time. It also sounds with different strenght.
Shall i try to change something before visiting Apple store?

Does anyone else have any problems with sounds when taking? It sounds like it did years ago when the connection was bad. But now it´s 2014!
I havent had this problems before so i guess that it came after the latest upgrade. It doesnt sound in every call i make and not all the time. It also sounds with different strenght.
Shall i try to change something before visiting Apple store?

Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Problems with sound engine

Hello, I have 64bit arch linux on my laptop. Everything was fine until some time ago when I made an upgrade after quite some time and after that I started having some small problems with sound.
1. The headphones stopped working when I plugged them in. I found out that in order for them to work I have to run the ESD daemon. That wasn't necessary some time ago. But then again if the ESD daemon is running and I plug off the headphones the laptop's speakers won't work.
2. Lately a problem appeared concerning multiple sound sources. If I have my browser running and youtube is open then I get no sound from amarok. I have to close them both and open amarok first then chrome. Amarok plays just fine but if I open a youtube tab there's no sound at all.
I have to admit it's kind of irritating having these. Any ideas?
Thank you in advance

I suppose it's not good that I don't have either of these files now, is it?
[verminoz@verminoz-lt ~]$ cat ~/.asoundrc
cat: /home/verminoz/.asoundrc: No such file or directory
[verminoz@verminoz-lt ~]$ cat /etc/asound.conf
cat: /etc/asound.conf: No such file or directory

Problem with sound on iPod Photo

I am having a problem with sound on an iPod Photo. You can hear music for about 5 seconds and then it is silent. I have to turn off the iPod for several seconds. When I turn it back on it will have sound again for about 5 seconds before going silent again. Has anyone else expeirenced this? Any ideas what may be happening

Try these steps one at a time.
The Five Rs.
If nothing helps, you can arrange online service here. This may be more than just a software problem.
Service request.

HT1657 I am having problems with sound in my rental movies

We rent movies all the time but lately we are having problems with sound for our movie rentals. We watch the first half hour without a problem than the voice is choppy all the time. Sometimes it is good for five minutes than noting for a while. We have tried everything we could think of with no avail. I could see one movie but the last 5 or so have been the same. Done trying we need to fix this! Help! Any ideas?

First try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
If you still have the same issue, it's possible that something is lodged in the earphone jack. This can cause the iPad to think earphones are plugged in when they are not. Use a vacuum to try to suck any dust, lint or other foreign matter from the jack. If that still doesn't work, try CAREULLY using a toothpick.

Problems with sound when upgrading to 3.1.2.

Similar Messages

Maybe you are looking for