Problems with special effect pictures on importing, why is this happening?

I have taken pic in expressive mode on my camera ( panasonic fz200) and when i have imported them they don't have the effect that I used, is there something I have to do on importing or do I have to change photos setting on my own in develop module or is something at the camera I have to change.

If you shot RAW, Lightroom will not read the expressive mode setting from the camera and apply them to the photo.  It should work shooting JPG as the setting are "baked in".

Similar Messages

  • When I select a photo from photo library, the wrong picture displays.  Why is this happening?

    When I select a photo from the Photo Library, the wrong picture displays.  I'm unable to find the picture selected, making it very difficut to apply wall paper or to contacts.  Why is this happening?

    I restarted the phone and forced the app to close and neither resolved the issue.  I then had the bright idea to remove the sync of photos and remove all the photos from the device.  I checked the Photos app and it was empty.  I then synced again with the photos selected and all the pictures were restored.  The photo library now displays the photo I select.

  • Problems with special letters while export/import the application

    Hi all,
    I have a HTML DB with german letters in the labels and buttons. After the import of my application I have developed recently, alle the german letters are replaced with curious characters like ö instead of ö e.g.
    Do you know a solution for this problem?
    Thx!
    Michal

    Hi Michal,
    1) What is the version of HTML DB?
    2) What is your database character set?
    3) What does the configuration of your Database Access Descriptor look like?
    4) If HTML DB 2.0, have you applied the PL/SQL Web Tloolkit patch?
    Joel

  • My firefox keeps crashing for no reason when I am playing FrontierVille. It has no problems with any other flash games. Why is this?

    I try to play this facebook/Zynga game every day, and I have no problem at first. After a little while though, it ends up crashing every time. I do not under stand why and would like to see if someone could help me, I am getting a bit angry. No other Zynga/facebook game has this problem, and they all use Adobe Flash.

    Creative Cloud Help / Creative Cloud applications ask for serial number
    http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html

  • I can't reserve an Iphone 4s because of problem with the site. Let me know if this happens to you as well.

    So i have been trying to reserve a white iphone 4s for verizon for the last two hours. And I am reserve it for Glendale Galleria in California. But everytime I go on the Choose Products page, and choose the iphone, the same page reloads without showing me the available/unavailable iphones in my local store. I tried to use it for the other stores and it worked perfectly. I just want to know if it is my problem or everyone else has it too. So please try to see if you can reserve an iphone from Glendale Galleria in California. Please let me know if it works and whether the White 16gb verizon iphone 4s is available. Thank you.

    same problem.  both yesterday and today.

  • Some of my website images with embeded links only show the link with firefox, with IE8 the image appears correctly, why does this happen

    my website http://www.functionkey.net. If you view my homepage you will see that 3 of my images with embedded links only show up with the links. I am not using "_blank" in my code. The website was created using Microsoft Frontpage 2003.

    If you look at the page source then you will notice that there are some errors with (missing) closing tags.<br />
    Such errors shows as RED text.<br />
    You need to correct at least all codes marked as red text.
    The first &lt;a&gt; tag isn't closed here and you open a second &lt;a&gt;
    <pre>&lt;a target="_blank" border="0" href="http://www.win-rar.com"&gt;
    &lt;div align="left"&gt;
    &nbsp;&lt;/div&gt;
    &lt;div align="left"&gt;
    <u>&lt;a href="http://www.smartdraw.com"&gt;</u>
    &lt;img src="images/sd_logo.gif" width="256" height="111" border="1" alt="SmartDraw - The world's first Visual Processor (TM)" hspace="0"&gt;&lt;/a&gt;</pre>

  • Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

    Hi, Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

    Absolutely.  Go to File->Export->QuickTime Movie (do NOT use QuickTime Conversion).  Make sure you check the Self-Contained box.  The export will be an exact copy of your Sequence, complete with any filters or other effects you've added.  Import the self-contained movie back into the project (or another project) if needed.
    -DH

  • I have Iphoto '09, version 8.1.2 (424). I am having an identical problem.  All my pictures are imported into Iphoto when I downloaded them from my camera.  Until recently, I thought that the pictures were actually saved in the library.  Since I need to cr

    I have Iphoto '09, version 8.1.2 (424). I am having an identical problem.  All my pictures are imported into Iphoto when I downloaded them from my camera.  Until recently, I thought that the pictures were actually saved in the library.  Since I need to crop my pictures for the web, and Iphoto doesn't do that, I purchased Photoshop Elements to do that.  To my surprise, when I try to get a picture from Iphoto to Photoshop, it can't be done. That was when I realized, after wasting a lot of time, that the photos are not in the Iphoto library.
    I started naming the pictures on Iphoto so I had a recognizable file name to open on Photoshop. Couldn't find it.  I looked in the Backup folder and the Transfer software folder (I have a Nikon camera), and the names I entered in the Iphoto display, could not be found.
    When I am trying to upload a photo to the web, I get the Finder folder showing  with an active folder called "Photos" under "Media", which only displays Iphoto and PhotoBooth.  This is a folder name that I cannot find in my HD anywhere when I look for it.  If I edit a picture with Photoshop, I am not going to save it back to Iphoto (not sure whether it will work properly).  How do I get my folder of edited photos to show when I want to upload a picture to the web?
    Where (the name of the folder) do I find the pictures I see displayed on the Iphoto library, including any name changes, keywords added, and so on?

    See my response to your other post.

  • Problems with special characters like "u00F6" "u00E4" "u00FC"

    Hi,
    we currently face some major problems with special characters like "ö" "ä" "ü". First I thought it is a SP02 specific problem but it still doesn't work with SP03.
    When I start an import the import manager shows correct converted value. "ö"s "ä"s "ü"s are displayed correctly. But after I've done the import I look into the Data manager and I see instead of these characters charcaters like "&#776;". (note: the character should show a little square box - but the forum cannot desplay it)
    How can I solve this problem?
    Regards
    Nico

    Hi Nico
      Just try it out the following steps, hope it solves ur issue.
    <b>To set one or more values back to their original values:</b>
    1. In the Import Manager Source Values grid, select the values that you want to set back to their original values.
    2. Right-click on one of the values and choose Set to Original Value from the context menu, or choose Values > Apply Value Conversion Filter > Set to Original Value from the main menu.
    3. MDME sets each value back to its original value, which appears in black in the Source Values grid.
    <b>NOTE : You can use the Set to Original Value filter only at the value-level and not at the field level.</b>
    thanks
    Alexander

  • Problem with After Effects CC 12.1

    Hello,
    I have a problem with After Effects CC ver.12.1. It does not work on my mac (with os x mavericks).
    I am a member of Cretive Cloud and I have a latest version of After Effects and it does not work.
    Other programs, like: Photoshop, Adobe Premiere or Illustrator works fine.
    But when I run the AE I get the message "You can not start After Effects -10810"
    Where is the problem?

    Same here, I get these messages - I'm confused as to why it says version 12.0 as it should be 12.1!

  • Problem with keyframe effect - at start and end (crop and scale)

    I'm having this odd problem with keyframe effects.
    Setup:
    I have a gif image that I have on video 1 for say 2 minutes.
    I have my real video on video 2.  It is a person talking.
    First I start with my video full size on top of video 1.
    Though the motion and cropping keyframe management I slowly reduce the scale and crop my video image so that it is reduced to the lower left bottom of the screen, on top of the gif, which is now revealed.
    My problem is at the start and end of the transition from full video to small box on lower left on top of my gif I often get 1-2 frames where the video goes blank and/or I get a bunch of random red bars on black background appearing on the video - Or I get the gif from video 1 without the video 2 at all (it disappears).
    I've tried moving my start of end of the transition to skip the bad spots - but these new transition starts or ends not get their own bad spots in the same way.  Its only a couple of frames but it's really unacceptable for the finished video.
    Note, when I say transition here I don't mean real transition events, but rather the start of effects that are managed with keyframes.  My move from start to end of the effect runs for about 4-6 seconds.
    Any ideas?

    Bill,
    Here is more detail and screen captures.
    Concept:
    I have 3 minutes of video.  It contains a person making a speech.  During parts of the speech I want to reveal a graphic image that will be discussed.  The speech will begin with the speaker full screen.  Half way in, the speaker will shrink down to 45% in the lower left corner of the screen.  While the animation occurs (the shrink, move and cropping) it will reveal the graphic below.  The graphic will take up the full screen with the speaker at 45%.
    Technique:
    I put the video in Video 2 and the graphic, a GIF image in Video 1.  The scene begins with the speaker talking at full screen.  After a minute, I animate the move of the speaker using Motion: Scale and Position and Effect: Crop changing Top, Bottom, Left and Right sides.  The animation occurs over approximately 8 seconds.
    I am manually adding keyframes at the start and end of the animation.  I set the ending state of the video image in the end keyframes.  The interpolation between these start and end keyframes should be managing the animation.
    Problem:
    At the beginning and end of the animation – usually 1-3 frames from the start and 1-3 frames from the end, where the change has barely begun or almost ended, I get these problems.  On some frames, the video (in Video 2) completely disappears only showing the Video 1 GIF image below.  On other frames, the video image turns black with horizontal red bands half way across.
    Troublshooting:
    I’ve tried deleting all start and end keyframes and moving the start and end earlier or later to see if I can fix this, but the problem continues to show up in these new locations.
    I have added a few screen shots.
    1:32:15 is the start of the animation change and 1:40:22 is the end of increasing from the mini video speaker to full size (on top of the GIF).
    At 1:40:16 the video image completely disappears only showing the GIF below.
    At 1:40:17 its back and slowly increases in size through the interpolation until it is full size at 1:40:22.
    Let me know if you need anything else.
    Thanks!
    Evan

  • Problems with special characters in InputStream or XPath

    Hello everyone,
    I am having problems with special characters such as ", ', - and so on, everything becomes ? (questionmark). (Not with special nordic characthers (å,æ,ø) though.)
    The encoding of the XML is UTF-8, and the server that holds the webservice is setting encoding to UTF-8 also, so no conflict there.
    What I have done is something like this:
    {code}
    String url = "http://www.formula1.com/rss/news/latest.rss"; // This is not the feed I use, it is a custom XML document
    InputSource is = new InputSource(url);
    DocumentBuilderFactory fct = DocumentBuilderFactory.newInstance();
    DocumentBuilder builder = fct.newDocumentBuilder();
    Document doc = builder.parse(is);
    Element rootElement = doc.getDocumentElement();
    XPathFactory factory = XPathFactory.newInstance();
    XPath xPath = factory.newXPath();
    out.print(xPath.evaluate("/rss/channel/title", rootElement)); // The xml is not a RSS feed, this is just an example.
    {code}
    Please let me know what I am doing wrong, or give me a hint of how to solve this in another way.
    Best regards,
    G.Hansen
    Edited by: G.Hansen on Mar 24, 2009 2:39 AM

    Hello, thanks for you reply. I had to rewrite your code a little, and I think that your code would not really compile, if you tried yourself :-)
    I ended up with something like this:
    our environment is running in 1.4 mode, so I could not use the for-each loop :-(
    public String printEntities(String s) {
         char[] sArray = s.toCharArray();
         StringBuffer sb = new StringBuffer();
           for (int i = 0; i < sArray.length; i++) {
             if (sArray[i] > 256)
                  sb.append("&#x" + Integer.toHexString(sArray) + ";");
         } else
              sb.append(sArray[i]);
         return sb.toString();

  • Help with Special Effect

    I am building the opening page for a website in Flash, I'm
    not the most experienced with Flash, but I'm getting a lot better
    and I know many of the functions. However I'm having a problem with
    an effect. It shouldn't be too hard to figure out, but here it is.
    I have a US Flag that is square it was built in Flash using
    about 10 - 12 layers with some motion. I haven't flattened the
    layers ( I don't know how too, or even know if I'm supposed to do
    that at all).
    I am trying to take the last of the constructed square flag
    and transform the Square into a Circle encompassing all of the
    elements within the square in a nice smooth motion.
    What is the best way for me to go about this?
    Thank You

    First off...no need to flatten layers. In fact, there's no
    such thing in Flash (unlike Photoshop or Fireworks). You can only
    delete layers (not to be confused with Layer Folders whichcan be
    collapsed on the timeline, but not flattened). Most animations need
    their own layer anyway and the number of layers won't in and of
    themselves effect the size of the resultant SWF (the contents of
    those layers will, but adding more layers won't make too much
    difference).
    Secondly, for the animation effect, you probably want to swap
    out your finished square flag (multiple layers) for a single
    graphic (new layer). Then, depending on the exact effect you want,
    you could use a circular mask on the square or perhaps shape tween
    the square to a circle.
    Hope that helps!

  • HT1386 I've encountered a problem while synching my entire library. After synching I've noticed that only half of my library is playable on my iPhone. And a red circle with a Stop button appears next to the songs that didn't sync. Why is this happening?

    I've encountered a problem while synching my entire library. After synching I've noticed that only half of my library is playable on my iPhone. And a red circle with a Stop button appears next to the songs that didn't sync. Why is this happening?

    media in the itunes lib but not connected when the sync take part will fail in this manner
    media in a not supported format on ios will fail to sync
    http://www.apple.com/iphone-5s/specs/
    Audio formats supported: AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), HE-AAC, MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV
    User-configurable maximum volume limit

  • I have a problem with the effect gallery and the saving libraries in Illustrator CS6

    Hi everybody
    I have a problem with the effect gallery and the saving libraries in Illustrator
    1. When you go to to effects > effect Gallery the the sketch filter always is black and white. Is this normal? In Photoshop you can set your background and foreground and the sketch effects takes those colors. Is there any way to do this in Illustrator? I have tried changing the colour of the fill and stroke but nothing...
    2. In the same area as before effects > effect Gallery .... In Photoshop you can add multiple filters with the create new button. Always is off is there anyway to make it available? or the only way is to by creating several individual ones and manage then in the appearance panel ...
    3. I saved a brush library and now it appears in the user defined area so I can get it in any document, that is good but any one knows how to delete a user undefined library?
    Many thanks in advance for the help .... I look forward for the reply =)

    I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
    Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
    Please, somebody, HELP.

Maybe you are looking for