Problems with special letters while export/import the application

Hi all,
I have a HTML DB with german letters in the labels and buttons. After the import of my application I have developed recently, alle the german letters are replaced with curious characters like ö instead of ö e.g.
Do you know a solution for this problem?
Thx!
Michal

Hi Michal,
1) What is the version of HTML DB?
2) What is your database character set?
3) What does the configuration of your Database Access Descriptor look like?
4) If HTML DB 2.0, have you applied the PL/SQL Web Tloolkit patch?
Joel

Similar Messages

  • Problems with special characters when exporting to LDAP

    Hi,
    Im using standard report RPLDAP_EXTRACT to export data to LDAP. The problem is that the special characters (in this case polish letters) do not save correctly (we get for instance '?' instead of normal letter)
    I tried switching the configuration of the RFC destination (used: 'found communication Code Page option') but I get a message: "Your selection is restricted" and cannot make any changes.
    Can anyone please help in this matter?
    Regards,
    Hubert

    1) Your database should be able to handle and properly store all the supported charactersets needed. With UTF you are in the clear regarding storing all that kind off idfferent characters
    See http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
    2) The recieving party (the cleint software) hopefully has a character set that supports all the characters that are offered by the database and can encode them. If not then you get toe upside down question markt or dark squares or something alike. If the client software is a browser, for instance windows internet explorer, then most encoding settings are buildin and you only have to switch. Sometimes you will have to add extra language support on Windows Internet Explorer. This behaviour is also the same on thick clients. Oracle by default sets these parameters in the registry, but on windows the can be overrulled on several levels like on system level, user level (start --> settings -- control panel --> system --> advanced tab --> environment settings) and or during execution via a app. configuration file or an export of the system variable on the command prompt... A unified business approach for how to handle this is needed otherwise you will have too look for these kinds off issues always all over the place (on windows and/or linux etc).
    Have a look at Mark's example of how things work regarding UTF and the like on the FAQ URL on this forum and the URL as show above. If completely lost, you will have to read up on it in the Oracel globalization / NLS manuals and see what is appropriate / can be done in your environment.

  • Problems with seeing photos while working on the Ken Burns Effect

    I am having difficulty seeing my photos when I use the Ken Burns Effect. All I get is a black screen. It won't let me adjust anything on the photos because the screen is black. Please Help

    So I have kind of the same issue here but it is slightly different. I tried all of the tricks that have been posted here but I am getting the black screen on brand new pictures that are imported both with and without the ken burns effect on them. I don't seem to have the problems on pictures that are already in the video with/without the KB effect.
    I have also tried to do it under another user account, downgraded iMovie HD 6 from 6.0.3 down to 6.0 and 6.0.2 and nothing seems to help. I have even removed the plists on both ~/Library/Preferences/com.apple.iMovie.plist along with anything in /Library/Preferences having to do with iMovie without any success. The only solution that I am resorting to is to just use a different computer all together or format the drive on my computer.
    Any solutions? I have a video that needs to be down by the end of next week...

  • Error: File Server Input is down while Export/Import the Unv from Desktop C

    Hi All,
    We have SAP BI 4.0 in Linux and installed the client components in Desktop. when we try to Import/Export the Universe to repository we are getting the Error: File Server Input is down and it's same with Webi Rich also.
    We are suspecting the firewall is stopping the Data packets because the person who is working in the client environment is able to do these without any issues.
    The main issue with PORTS and we are not at all sure which ports are required to be open.
    If anyone has solution please let us help.
    Thanks.

    They use the ports you assigned during installation.
    Tomcat ports are shown in tomcat's server.xml
    The port set for CMS are in CMC > servers>properties of the CMS server.
    The rest - simple follow instructions in the admin guide and you'll be OK.

  • New problem with file name while exporting files

    Hi all. Whenever I export files from Crystal, it converts the filename from mixed case to lowercase, i.e. Vendors.pdf or Vendors.csv becomes vendors.pdf or vendors.csv. The destination folder has other files of mixed case, it's not a setting on that side. Since this file is data for an upload, it's a problem. Can't find a setting in Crystal. Is there a fix somewhere?
    Thanks
    Robin

    Hi Robin,
    When exporting this is by design, most OS's won't allow the same name so it's mostly not an issue. You could write a small application that exports for you then you can rename it to anything you want.
    Thank you
    Don

  • Problem with Latin Characters while transferring to the file

    Hi,
    I want to transfer the data to the file. But the problem i m facing is latin characters get converted to unwanted characters.
    If i use FM 'SCP_REPLACE_STRANGE_CHARS', it converts latin to english.
    But i want latin to be latin itself.
    Please help.

    hi..
    this has more to do with the conceppt of codepage of the system...that u r using..
    in some cases the development system is unable to recognise the local characters...and hence it prints junc characters....but wen u move the same to higher system...u can find the desired characters....
    Also try one thing ..log in in local (Latin Language ) and upload...even if it does not come in devlopment system...it will come in higher systems...
    Hope the above works...Reward points..if helpful...
    Edited by: Rudra Prasanna Mohapatra on Jul 3, 2008 1:27 PM

  • Problems with special effect pictures on importing, why is this happening?

    I have taken pic in expressive mode on my camera ( panasonic fz200) and when i have imported them they don't have the effect that I used, is there something I have to do on importing or do I have to change photos setting on my own in develop module or is something at the camera I have to change.

    If you shot RAW, Lightroom will not read the expressive mode setting from the camera and apply them to the photo.  It should work shooting JPG as the setting are "baked in".

  • Problem with special charecter while calling a BAPI from Webdynpro JAVA.

    Hi Experts,
    I am calling a BAPI from Webdynpro JAVA. I am passing a special charecter  u2018 as input to BAPI. But I am getting a # as input in R/3.. Can any one explain why it is getting changed?
    Any inputs regarding this issue are appreciated.
    Thanks,
    Kasinath.

    Hi,
        I had same problem before..For this I have created function module in backend for removing #. It was for converting Stream to ITF text.
    CONVERT_STREAM_TO_ITF_TEXT.
    Try this.
    Thanks,
    Prajakta

  • Problem while importing the application in application express 3.0

    Hi Friends
    We have developed an application in a workspace say X. I imported the complete application in different workspace Y and the import was successfully. Now if I export a single page from that application in workspace X and import in workspace Y, then it gives me error as
    "This page was exported from a different application or from an application in different workspace. Page cannot be installed in this application."
    Also I tried changing the application id in the export file but did not work.
    Is their a workaround for this?
    (We are using application express 3.0.0.00.20)
    Thanks
    Minakshi

    Hi Scott
    1 ) Page exports are to be imported into an application having the same ID as the source application in the same named worskpace.
    But the problem is I cannot have same application id in the same workspace or in different workspaces even. I exported the complete application from workspace X with application id as 555 and tried importing the application in workspace Y with the same application id. But that does not work since it throws the error message as the same application id cannot reside in 2 different workspaces.
    2) You don't say whether workspaces X and Y are in the same or different databases.
    Both the workspaces X and Y are in the same database. The database user/schema that is associated with workspaces X and Y are different.
    3) Also I tried changing the application id in the export file but did not work.
    Following is the extract of the page that i tried importing. The places wherever it is marked BOLD, i modified them in the original page export sql file.
    --application/set_environment
    prompt APPLICATION 500 - Load_Factor_System
    -- Application Export:
    -- Application: 500
    -- Name: Load_Factor_System
    -- Date and Time: 15:52 Wednesday May 16, 2007
    -- Exported By: ADMIN
    -- Flashback: 0
    -- Export Type: Page Export
    -- Version: 3.0.0.00.20
    -- SET APPLICATION ID
    wwv_flow.g_flow_id := 500;
    wwv_flow_api.g_id_offset := 0;
    null;
    In case you need further clarifications, please let us know.
    Regards
    Minakshi

  • Getting error while importing the application in Oracle Apex

    Hi,
    I am facing an issue while importing an application into my new Oracle Apex installation. Installation was successful with out any issue. I exported an application from my old Apex (version 3.0.0.00.20) and importing the same into new apex (version 3.0.1.00.08). I am getting the following error.
    ============================================================
    The requested URL /pls/apex/wwv_flow.accept was not found on this server.
    ============================================================
    When I click on import in Application Builder page and then browse the required file it gives the progress saying "Importing File" and after some time it displays the above error.
    I tried bouncing the application also and there is not error in alert log.
    Could any one please suggest, if there is some problem here. Or my approach is not correct.
    Thanks in advance.
    Regards,
    Advait Deo

    Osacar, I recommend that you try to import the application into your workspace on apex.oracle.com and see what happens. Also, refine the problem statement as much as you can, e.g., you get this error importing "the application" or when importing "any" application. How big is the file you're trying to import? Where did it come from? Can you upload images?
    Scott

  • Getting error while Importing the Application

    Hi,
    I am Getting Problem While Importing the Application
    We are moving the Application from Test enivorment to Production Environment, Both are Oracle 10g with HTTP server and Application Express 3.2.1.
    While Importing i am getting Error like.
    Error report:
    ORA-06550: line 3627, column 1:
    PLS-00123: program too large (Diana nodes)
    06550. 00000 - "line %s, column %s:\n%s"
    *Cause:    Usually a PL/SQL compilation error.
    *Action:
    Please Help Me its Urgent

    Hi joel,
    Even tried for the Copy of the same application in the same Application but its giving the same error.
    and I tried with the SQL Developer It shows the error like
    Set Application ID...
    ...authorization schemes
    Rollback
    Error starting at line 200 in command:
    begin
    --application/shared_components/security/authorization/des_mstr_delete
    wwv_flow_api.create_security_scheme(
    p_id => 7573129300337441 + wwv_flow_api.g_id_offset
    in the line 200 the above code starts.
    at end This will be displayed
    Error report:
    ORA-06550: line 3652, column 13:
    PLS-00123: program too large (Diana nodes)
    06550. 00000 - "line %s, column %s:\n%s"
    *Cause:    Usually a PL/SQL compilation error.
    *Action                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Problems with special characters like "u00F6" "u00E4" "u00FC"

    Hi,
    we currently face some major problems with special characters like "ö" "ä" "ü". First I thought it is a SP02 specific problem but it still doesn't work with SP03.
    When I start an import the import manager shows correct converted value. "ö"s "ä"s "ü"s are displayed correctly. But after I've done the import I look into the Data manager and I see instead of these characters charcaters like "̈". (note: the character should show a little square box - but the forum cannot desplay it)
    How can I solve this problem?
    Regards
    Nico

    Hi Nico
      Just try it out the following steps, hope it solves ur issue.
    <b>To set one or more values back to their original values:</b>
    1. In the Import Manager Source Values grid, select the values that you want to set back to their original values.
    2. Right-click on one of the values and choose Set to Original Value from the context menu, or choose Values > Apply Value Conversion Filter > Set to Original Value from the main menu.
    3. MDME sets each value back to its original value, which appears in black in the Source Values grid.
    <b>NOTE : You can use the Set to Original Value filter only at the value-level and not at the field level.</b>
    thanks
    Alexander

  • I bought a new MacBook Pro several months ago.  I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2).  I find the quickest fix ix to turn Airport off and back on.  Very annoying.   Suggestions please?

    I bought a new MacBook Pro several months ago.  I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2).  I find the quickest fix ix to turn Airport off and back on.  Very annoying.   Suggestions please?

    What kind of wireless router are you using? more importantly which protocol are you connecting with? Are you and wife connecting using the 2.4Ghz band? or do you have a dual band router that offers the 5GHZ band?  Are you both connecting vie 802.11 a/b/g or n?
    The best thing to do is to go into SYSTEM PREFERENCES and select NETWORK, then select AIRPORT and click on the ADVANCED button.
    Under the AirPort tab you should delete all the preferred networks and only add back in your network with the proper security settings and passwords.
    If you hold down the option key on your keyboard while clicking on the airport icon at the top on your macbook pro. you'll seesome data that will tell you what band and mode you're connecting at, as well as in an indication of signal strength (RSSI) if you write down and post back that information it'll tell us what's going on.

  • Problems with special characters with XML/PDF printing

    Hi,
    Our setup:
    Apex Listener 2.0.5
    Oracle DB 11G
    Weblogic
    Apex 4.2.2
    Various recent major browsers
    We used this blog post so we could do some PDF printing with APEX Listener:
    http://marcsewtz.blogspot.be/2013/04/pdf-printing-with-oracle-application.html
    The problem is special characters. For example the "&" sign comes out as "%26amp;" when we export an XML.
    Could anyone provide some insights of what we can do to fix this?
    Regards,
    Joni

    This is a known bug.
    https://support.oracle.com/epmos/faces/BugDisplay?_afrLoop=957905848396285&id=18282188&_afrWindowMode=0&_adf.ctrl-state=168vq5zhn3_233
    The bug 18282188 has been fixed in Apex 4.2.5 version.
    Upgrade the Apex version to 4.2.5 when it is available.

  • Need help with database migration using export/import

    Hi,
    I am planning to do a database migration from 8.0.6 to 10.2.0.4. I am using export/import. Please answer some of my queries:
    1) Do i need to do full export using SYS/SYSTEM user.
    exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=y
    2) Will there be any data corruption while export.
    3) Is export/import the only method of migration/upgradation.
    Please help
    Thanks.

    I'll answer the specifics that I know about your questions, but please look at the post from Srini for additional info:
    1) Do i need to do full export using SYS/SYSTEM user.
    exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=yA full export will move as much information (metadata/data) as possible. In order to do a full export/import, you need to do this from a
    privileged account. A privileged account is one with EXP_FULL_DATABASE for export and IMP_FULL_DATABASE for import.
    2) Will there be any data corruption while export.The data in the objects that you are exporting is being read, nothing is written to user data. I'm not sure what this is available in 8.0.6,
    but if you need a consistent export, look to see if consistent=y is available in 8.0.6. All this means is that the dump file created will have
    consistent data in it.
    3) Is export/import the only method of migration/upgradation.If you are changing hardware, the only supported way from 8.0 to 10.2.0.4, that I know of, is using exp/imp.
    Hope this helps.
    Dean

Maybe you are looking for