Problems with standard checkings
Hi,
We'd like to know if someone has worked in a proyect with two different Systems S1 and S2, data cannot be copied (transfered) from one to the other but we must check data from system S1 refering to data in tables in system S2.
This scenario is a problem when standard checkings are done in the tables, due to of course checkings are done over tables of current system.
Do anybody know how to manage standar checkings in current system S1 to allow the checkings against tables in system S2?
Thank u very much !!!!!!!!
Best Regards.
The solution was proposed from another point of view. Thanks to all for your help.
Best Regards.
Similar Messages
-
Problem with standard Routine "Seniority"
Hi gurus,
I have a problem with the routine "Seniority" that evaluate the length of service for the infoObject 0SRVCLEN - Length of Service. It is a standard routine in the update rule 0HR_PA_0.
The problem occurs when the Employee has less than a year of service. The result of the routine is "0" but in the BW query "0" is interpreted like "#" - Not assigned.
How can I change the value of the Not assigned result?
This is the main part of the routine:
IF NOT EMPLOYEE_WA-ENTRYDATE IS INITIAL.
RESULT = ULTIMO0(4) - EMPLOYEE_WA-ENTRYDATE0(4).
IF ULTIMO4(4) LT EMPLOYEE_WA-ENTRYDATE4(4).
RESULT = RESULT - 1.
endif.
ENDIF.
Thanks
AlbertoSonal,
To find the number of items please correct the code as below:
Determine number of PO item lines
LOOP AT TKOMV WHERE<b> KNUMV = TKOMV-KNUMV</b>
AND NOT KPOSN IS INITIAL.
AT NEW KPOSN.
I = I + 1.
ENDAT.
ENDLOOP.
Keep rest all code as it is.
Let me know if this works,
Thanks. -
Problems with Standard Apps views (eBusiness Suite)
Hi all,
I am working with Oracle Application Express and Oracle eBusiness Suite 11.5.10. We have integrated OAE with EBS, but now we are having problems with the standard views (owner APPS).
I would need the help from somebody that works with OAE and EBS.
Once we want to query one of the standard views, like ap_invoices, it is necessary to initialize the session with a script like this:
begin
DBMS_APPLICATION_INFO.SET_CLIENT_INFO(219);
end;
This script lets us to access to the data from the table AP_INVOICES_ALL using the view AP_INVOICES.
Once I have run the script from SQL Commands (SQL Workshop), I try to run a query using the standard view, for example:
SELECT * FROM apps.ap_invoices
From a Report or from SQL Commands (SQL Workshop) always I get the next error:
"ORA-01722: invalid number."
However, if I run this query from SQL Plus (same db user), there is any problem, the query works and retrieves rows.
If I get the source code of the view, remove all the columns, keeping the next SQL:
SELECT 1
FROM ap.AP_INVOICES_ALL
WHERE NVL(ORG_ID,NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV('CLIENT_INFO'),1,1),' ',NULL,SUBSTRB(USERENV('CLIENT_INFO'),1,10))),-99)) = NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV('CLIENT_INFO'),1,1),' ',NULL,SUBSTRB(USERENV('CLIENT_INFO'),1,10))),-99)
Run this SQL in OAE and I obtain the error again, however from SQL Plus the query works correctly.
I suppose somebody that works this EBS and OAE has had this problem. How did you solve it?
Thanks in advance.
Regards, Luis
PD. I have tried to not used the views and use the tables filtering the ORG_ID and looks it can work, but I do not like this option.Luis - I don't know where you are running these blocks - the SQL Command Processor in APEX? Anyway, for every APEX page request the engine executes something like the following, depending on your version: begin
dbms_application_info.set_client_info(g_user);
dbms_session.set_identifier(substr(g_user,1,(64 - length(g_instance)-1))||':'||to_char(g_instance));
dbms_application_info.set_module('APEX:APPLICATION '||to_char(g_flow_id),'PAGE '||to_char(g_flow_step_id));
exception when others then null;
end;In the above code, the value of g_user is the logged-in username, perhaps ADMIN in your case.
Keep in mind that when you do a set_client_info in the database session, that persists only for the duration of the session. On the next page request, you'll get a new database session (or a recycled one).
Scott -
Java debugging - problems with standard input
Hi
I hope somebody can help me with this problem.
I'm developing a Java app that reads from the standard input. I use System.in.read() to do that. When I debug it, I use the Standard I/O window instead of the Run Log window to pass in values, but nothing happens (i.e. the line following the read() is never reached). I also tried to run the app and then attach the debugger to use the Run Log window as standard input, with the same result. If I add a breakpoint before the call to read(), the debugger pauses the execution, so I suppose the breakpoints are OK.
In the executable Info window, Debugging tab, I use the pseudo terminal with the Java debugger.
So my question is: how can I enter values from the standard input in debugging mode?I believe that you are seeing these problems because we have found the
current versions of RMI found in the JDK to be inherently unscalable -- we
do not listen for them. As you noticed, we recommend that you use our
packages for now, and then do the simple change that you found if you decide
that you do not like WLS. (If you do decide that you do not like us, please
definitely let us know why you chose the way you did!)
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"Tim Dawson" <[email protected]> wrote in message
news:397b8cc2$[email protected]..
We're developing a J2EE application on NT using WLS 5.1, SP3, but we don't
want to be tied to any particular J2EE server, so we're making sure that
none of our code is weblogic specific.
In keeping with this philosophy, I created an RMI service that used the
standard java.rmi.* imports instead of weblogic.rmi.* and used thestandard
RMIC compiler rather than the weblogic.rmic compiler.
Unfortunately, I couldn't get the system to work. I kept getting
"java.rmi.MarshalException: Error marshaling transport header; nested
exception is: java.io.EOFException" whenever I'd call Naming.lookup().
Of course, when I did the search & replace with java.rmi.* with
weblogic.rmi.*, and switched from the standard rmic to weblogic.rmic,
everything started working just fine. This is the ONLY change I made!
Has anyone else run into similar problems?
Tim Dawson
Sr. Software Architect
is.com -
Problems with standard update trought delta
Hi my case is this:
i got an Infoobject called: 0UCCONTRACT, this has its attributes, among them , there is one called 0UCBLC_REAS, the problem is this:
the Infoobject 0UCCONTRACT is updated everyday throught DELTA , but its NAV.attribute 0UCBLC_REAS is not updated, when i look the data source 0UCCONTRACT_ATTR and search a record the datasource is ok in R3, the field is standard not Z, and the table EVER where the Data source serach data is ok is updated,
then i did a repair load just bringing one record to prove, and when i see in the infoobject that record was updated,
in summary, when i load data trought delta doesnt update this nav.attribute
when i load data trought Full or Repair , this nav attribute can be updated, why? i dont know and just happen with this nav attribute,
please i'll really appreciate it , thanksnanay
-
Problem with standard distribution function
Hi,
The task is following:
There are three cubes - one with data to be distributed (non-transactional), one with reference data (non-transactional) and one where the distributed data should be written (transactional).
I am trying to use standard IP planning function Distribute with Reference Data to achieve the result. However when I put 0INFOPROV as a characteristic to be changed, I can select value for it only in block FROM and TO, and not in REFERENCE DATA SELECTION.
So to tell the system, taht reference data are located in third cube I have added new car which for the is always filled with constant in the reference cube (for every record).
But it seems that it does not help: When trying to execute, following error message appears: Cannot find reference data for sub-process 1 of the function
Anywone has ever customied standard function in a way that it is able to use data from three cubes? What do I do wrong?
Thanks in advance,
Marcin
ps. I work with IP, but assume that BPS is very similar regarding stadard planning functions, so any suggestion is welcome.of course you can include 0infoprov into fields to be changed, but in your szenario it wouldn' make any sense.
if fox formulas you set values for 0infoprov by yourself, in distr. function you are telling the system: distribute origin field value for char xy according all posted values in certain reference records.
as 0infoprov is a technical infoobject and given the fact that your reference records are stored in cube 3 which is non transactional as well) -> to tell the function, that your reference records are stored in cube 3 you have to set 0infoprov as reference char.
if you can not copy all data before distribution (to be honest i don't see any reason why this shouldn't be possible) you could only ditribute the values using function of type fox or exit. -
Problem with Standard Midi files
When I open a standard midi file in Logic Pro X and I press "play", after a while, let's say a minute, the system crashes and a box inform me that the "System's overloaded. The audio engine was not able to process all required data in time. (-10011)"
Any hints on how to solve this problem?
Many thanks!
DeashiHi Deashi Barai,
Thanks for using Apple Support Communities. This article has some basic troubleshooting for Logic Pro X that might help solve your issue:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Additionally, this is an older article addressing the same error in previous versions of Logic Pro that might also provide insight or help:
Logic: CoreAudio System Overload Messages
http://support.apple.com/kb/TA24535
Cheers,
- Ari -
Document Distribution DMS, problem with standard workflow WS20000104
Hi,
In our document distribution process we stacked with the problem, when we run the document distribution (via tcode CVI8) we got the error of workflow WS20000104. After some search at SCN we found that there is the similar issue, described in the thread: Document distribution workflow in error. Solution which was offered and marked as worked is to enable/activate Result Parameter check box, but in our case this check box is disabled and when we try to edit the BOR in order to activate Result Parameter check box the system asked to input Access Code.
Is there any way (note) to enable this check box without access code?
Thanks.Hi, Deepak Kori
In transaction SWU3 there is the following situation:
Maintain Runtime Environment is completely green, including sub-categories;
Maintain Definition Environment is red because of Check Entries from HR Control Tables;
Maintain Additional Settings and Services is red because of Maintain Web Server;
Classify Tasks as General is completely green, including sub-categories;
Guided Procedures is red because of Maintain Guided Procedures Gateway.
Could you, please, explain what do you mean under «workflow settings are activated», how parameters described above are related to workflow and may be related to our problem?
If described situation can be assumed as activated, what should we do now? Otherwise, how to make these settings to be activated?
Thanks. -
Facing a problem with standard text in custom program
Hi,
As per my requirement i need to create a standard text (transaction code s010 ) in custom program using below code. But when click save button then it needs to be come out of the screen without click back button.
CALL FUNCTION 'CREATE_TEXT'
EXPORTING
FID = G_THEAD-TDID
FLANGUAGE = G_THEAD-TDSPRAS
FNAME = G_THEAD-TDNAME
FOBJECT = G_THEAD-TDOBJECT
SAVE_DIRECT = 'X'
FFORMAT = '*'
TABLES
FLINES = I_TLINE
EXCEPTIONS
NO_INIT = 1
NO_SAVE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
ELSE.
CALL FUNCTION 'EDIT_TEXT'
EXPORTING
HEADER = G_THEAD
SAVE = 'X'
TABLES
LINES = I_TLINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
LINESIZE = 3
NAME = 4
OBJECT = 5
TEXTFORMAT = 6
COMMUNICATION = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
ENDIF.
ENDIF.
Can you please help me how to do this
Regards
nagBut when click save button then it needs to be come out of the screen without click back button.
can you explain me, what do you mean by that.
~satya -
Facing problem with standard master data source *0bp_def_address_attr *
Hi All,
I am using BW 3.5 version
I am loading master data form 0bp_def_address_attr(stabdard data source) as part of my daily activities.
this loading is failing frequently throwing following error message
30 duplicate record found. 1243 recordings used in table /BI0/PBPARTNER
ID : RSDMD
message number 199
Is there any way I can avoid this failure?How can I handle duplicate records?
Please help me!!
Warm regards
Nanduri AdityaThanks for your answers and sorry for my late reply
Hi Srinivas,
I am using 3.5 there is no ' handle duplicate records' option in info pacakge.
Hi Francisco,
Thanks for your answers,
2 OSS notes are relevant to my problem. Currently I am checking in Dev whether it will fix my problem or not.
Thanks a lot it was avery helpful answer.
Warm Regrads,
Nanduri Aditya -
Problem with S_ALR_87013149 and S_ALR_87013148
Hello Experts,
I have a problem with standard reports S_ALR_87013149 and S_ALR_87013148.
They give no data : "No records were selcted"
What's the solution for that ?
Thanks,
FerdawsHi,
Whenever you have a message like this for any report, it could be for two reasons:
a) selection parameters
b) authorizations (could be verified by SU53 transaction)
Please, check both...
Regards,
Eli -
Problem with total button in alv..?
Hi abapers,
i am facing a problem with standard alv total button
all the others button r working fine
but when i am trying to add any column total by using standard total button
its throwing dump..
Can anyone tell me wat to doHi Aarif Baig,
Paste your dump analysis...
what dump you are geting and source code for your field catelog... ??
as well as which field you are removing from your fieldcatelog so that dump is not coming... ??
and code for that field in fieldcatelog ??
and is the type of that filed in fileld catelog and internal table is same or not... ??
if i am not wrong you will be getting dump for message x000..
Please give complete details what you did with little source code and dump analysis....
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya -
Problems with MDM 5.5 SP05 Portal Content - ResultSet iView
Hello Experts,
We are having problems with standard iViews from MDM 5.5, more specific with ResultSet iView. We created an iView using English as default browsers language but our client wanted it in Portuguese, so in the MDM Repository both languages were defined and used in MDM Data Manager, when passed to the Portal iView an error occur, but only in a ResultSet iView from the MDM Portal Content, the others iViews (itemDetails, PicklistSearch, etc...) are shown in Portuguese, and we cannot figure out why it works fine in English and not in Portuguese. We left the default language defined by clients browser. Below Im sending the LOG, which by the way, doesn't help much, but I put it also here. Any ideas of what should I do ?
LOG ERROR:
java.lang.IllegalArgumentException: unknown format type at
We are using Portal 7.0 SPS11 and MDM 5.5 SP05 - Portal Content in a Win2003/Oracle server each.Alex,
sorry to disturb you with this issue, can you explain me basic steps in order to setup standard MDM iviews from the portal?
I mean, I have already installed all standard mdm business content, and also have configured system and aliases in the portal to connect to my mdm repositories. Those system/aliases are working propperly.
But, when I try to preview standard MDM iviews/pages I got several JAVA errors in trace logs.
Specific iviews are: Item Details, Show products, etc..any iview execution fails.
So, am I missing something?, do i have to create a specific user in portal?, assign specifi roles or groups???.
Platform is: nw2004s SR2, SP11, MDM content 5.5
Thank you in advance. -
Language problems with std reports
Dears gurus,
We are facing some problems with standard reports due to translations...
We have 4 languages actives at our ERP System, DE, EN, ES and PT... The completation Language is EN in all cases...
The SMLT Import Logs for both languages (ES and PT) and completation with EN are not showing errors, but if we import at last the Language ES, the reports runs OK with logon language ES but with PT as logon language all texts are showed in DE, even that the completatin language is EN. If we re import PT language the reports runs OK with logon language PT but with ES as logon language all texts are showed in DE...
Had anyone faced the same problem and solve it?
Thanx a lot!!!Garth, we found that the reports with problem was created or provided by SAP trough Report Painter or Report Writer.
We can solve the problem recreating the "Report Group" in the logon languaje that works bad. To do this you have to find in which Report Group is the Report that you are running and using transaction GR52 complete attributes for this group, save (Logged in with the language that shows the problem) and the problem is solved.
I hope this helps you.
Thanx
Regards
MJ -
Strange Problem with Forms (Smart Forms)
I have lately been experiencing a strange problem with standard forms in the system. We have WebAS640 / ECC5.0 System. Soon after the initial run of patches, most forms in the system are showing the character '#' in place of formatted texts.
I have searched the internet and most forums, but have not found a solution. Since this is the standard forms that i am talking about (unmodified and untouched) so i assumed this had something to do with our patch levels. However that is only an assumption.
In particular i am having problem with the billing invoice type RD00, form name: LB_BIL_INVOICE. I have traced the problem to this much. The form shows the expected text, where no character format is applied to it. And where ever there is some character format, it just shows a string of hashes ('#'). The style being used by this form is LO_STYLE.
I am also listing my patch levels in case that helps.
SAP_BASIS 640 0014
SAP_ABA 640 0014
ST-PI 003C_640 0001
PI_BASIS 2004_1_640 0006
SAP_BW 350 0012
SAP_HR 500 0005
SAP_APPL 500 0006
PI 2004_1_500 0004
EA-IPPE 300 0004
EA-RETAIL 500 0005
EA-PS 500 0005
EA-HR 500 0005
EA-GLTRADE 500 0005
EA-FINSERV 500 0005
EA-DFPS 500 0005
EA-APPL 500 0005
Hope somebody can help in regardHi Ashan!
Interesting problem. You are seeing replacement characters, because assigned font(size) is not installed (somewhere, SAP or printer).
But since this is completely standard, open an OSS-request - maybe it's not as fast as SDN, but I'm sure you will get a qualified answer (and solution).
Regards,
Christian
Maybe you are looking for
-
My daughter has an ipod touch with alot of games and music on it. The computer it was synced to is forever gone and on her new computer some of the games dont show up along with her music. She is worried if she connects it to her new computer all wil
-
So, I have plugged my iPod in. On the actual iPod the screen says it connects and syncs, but none of my songs have gone onto it. Itunes knows its plugged in, but pressing sync doesn't do anything.
-
BSOD terminal server 2008 r2 after user logoff
Hi there, We have a serieus problem with users that logoff on a terminal server. When a user logoff of the terminal server we'll get a bsod. Win32k.sys crashes. Our terminal server is a Windows 2008 r2 sp1 based on VMWare 5.0. We have installed al t
-
I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower. Has anyone had similar problems? I have Feb 2011 Macbook pro 13" 2.3 Ghz.
-
Dreamweaver on open PVII ext error 148:3
Windows 7, just updated Dreamweaver and Fireworks yesterday. This error says license has stopped working. But I can start and use Dreamweaver doing anything else, no issue. I can also start and use Fireworks no issue. But when attempting to load P