Problems with starting Windows after Boot Camp was installed on a Win-PC
Hi,
i have a very interesting problem for the MacComunity (haha -.-). The problem is: after I have installed Boot Camp from my Snow Leopard DVD on my Windows PC (not my iMac); I can not start the system. In the Boot Camp System where i can set the system to start with, there was only the Boot Camp System available (not Vista). However, the system installs some Vista-Updates and some Updates from Apple Software Update (iTunes 9.2, Quicktime 7, Safari 5, Airport 5, Boot Camp 3.1) on my PC.
Everything was all right but after I have restarted the System nothing happend. the System freezed when the boot-Screen (Intel Logo) appears. The Systemkeyboard was not detected. It only detects a n external apple Keyboard. There are some reactions when I press the keys, but the Monitory is frozen, anyway. What can I do?
Sounds like a lesson in there: don't wait to put OS X on an external drive that is usually off line.
Rush to a store or on-line and get a UPS of the 1500VA sort (APC RS would be nice, or SMART UPS 1000VA).
The directory of the drives could be corrupt.
I have all my equipment, modem, routers, the works, but we had a bad storm and one port on the router/modem is out (the one I used, the modem seems to be okay) and I am worried that the UPS's line filter for DSL in is also 'compromised.'
Storms and power outages can wRECK or cuase havoc.
It sounds like you need to map out bad sectors maybe (zero all in Disk Utility) perhaps. The directory, volume blocks, or even journal file, got scrambled. However, because no test can find it means - to me - it could be the "non user partitions" rather than OS X partition etc. Hence, zero the drive or just reformat it in full.
Why have you not ever with these outages, just continued to live w/o one? I wouldn't just shutdown, I would unplug if a storm approaches.
PS: SMC Reset button is under drive bay #4. Give it a 5-10 seconds depress.
Similar Messages
-
Stability problems with Win7 x64 and Boot Camp 3.1...
Before I was running win 7 with Boot Camp 3.0 and On top of that I installed my Chipset and Graphics from Nvidias Website. System was running without any major problems.
Now I have win7 and BootCamp 3.1 and the laptop runs like crap... System freezes sometimes only for a minute most of the time I need to hold power button.
The last time I has ScanDisk start on me and start checking. it found about 200 missing files some unindexed and MFT bitmap was repaired...
Do not know why, I'm unable to figure out what was causing that.
Currently I have win7 x86 with bootcamp 3.1 installed and The system works good.
I think there is an issue with the 3.1 x64 driver package.
If anyone has any Ideas on what I can do to figure out why the system runs so unpredictable with 3.1 x64 drivers installed. I'm whiling to experiment and reinstall win7 x64 as many times as needed so i can send an error report to apple to get this issue fixed.Wow, i've been running windows 7 64 bit in boot camp since I got my copy as a beta tester in July and never had any issues like you're describing. Boot camp 3.0 worked fine (other than the light in the audio port and minimal touchpad control, and the still present inability to dim the screen dynamically based on brightness around me). And I've had no problems with boot camp 3.1 so far. In the previous BC versions, I went to the nvidia site and downloaded whatever the current driver was for the video, but nothing specific for the chipset. With 3.1 I haven't done even that, just using what the boot camp update installed. Have you tried it with just the BC 3.1 drivers, not getting anything extra from Nvidia or anyone, just to see what happens from that point first?
About the only time I had any issues with diskchecking is when I accidentally close fusion and it abends my windows session. I make a point then of booting and telling it to ignore the disk check, editing the registry to reset the flag so it doesn't do it, then just run a disk check from within windows telling it NOT to fix anything, so that it can verify it's clean. I found the normal disk check in the preboot environment is horrendous on the MBP, takes me literally hours to run through despite it never finding anything to fix. -
Problem with starting Windows when W510 in docking station
When I put in my W510 to the docking station, I have usually every second day problems with starting up Windows operation system.
I make 2 videos, where on the first 100_1060.MOV you can see starting Windows when it is frozen (first 1 minute record, I start record after about 3 minutes frozen), then I have to reboot W510 by on/off button and start ThinkVantage.
On the second video 100_1061.MOV is starting operating system after ThinkVantage process, this start is OK.
http://www.licko.cz/w510/100_1060.MOV
http://www.licko.cz/w510/100_1061.MOV
Why I have this problems? I have latest Windows and W510 updates.
Regards,
Lubomir Licko
Solved!
Go to Solution.There was some upgrades of Microsoft and Lenovo and I don't have this problem long time.
-
Help! How to start windows in boot camp?
I have read several posts on this but I still cannot seem to get it started. I recently bought a macbook with bootcamp set up with windows xp. I had vmware fusion on my computer to use windows but I uninstalled it because I cannot use it for the purpose of windows that I need. Now, I do not know how to start windows on my computer. I cannot use a virtual machine because my exam software that I use for school will not start up when using a virtual machine.
I restart my computer and hold down the option key and the only hard drive that shows up is the Mac HD. The boot camp drive does not show up. So, if I cannot start windows that way...is there any other way???
THANKS!I cannot use a virtual machine because my exam software that I use for school will not start up when using a virtual machine.
It requires DirectX 9? Huh?
I restart my computer and hold down the option key and the only hard drive that shows up is the Mac HD.
That sounds like your computer came with VM Fusion, and was not set up with boot camp. Please prove me wrong.
First, how many disk icons are on your Mac OS desktop? Is there just the Macintosh HD icon, or is there another disk icon labelled, say, "Untitled" or "Boot Camp".
Second, open /Applications/Disk Utility. Select your hard drive (not the Macintosh HD volume, but the actual hard drive, just above the Macintosh HD volume). Then click the "partition tab". How many partitions do you have. Does it show one HFS+ Journaled volume, or more than one partition and of what types.
Third, if you did see a second disk icon in step one, select it and hit CMD-I. What is its used and free space? Open it in Finder: is there a boot.ini file? A Windows folder?
Fourth--I should have thought of this first, sorry--some MacBooks have a bug that Option doesn't let you select an OS. So open Apple > System Preferences > Startup Disk and see if there is a Windows there for you to select. If so, select it and "reboot now" to boot into Windows. To boot back into Mac OS, you can either use the option key, or use the boot camp system tray icon to select Mac OS as your startup disk.
Finally, did your computer come with a Windows XP CD? -
I updated my I Phone4 with the latest version iOS7 after updating I was asked to enter I tune password etc and then was asked to accept the terms and conditions which I did......but nothing happens it stays on the same unable to complete the final stage.....my phone does not work I am stuffed can someone help.....cannot get thru to Apple I tried contacting them
Hi Rajvidya Das,
Do the following, then try again:
1. Close all open apps: Double click on the Home key and then swipe up on each of the thumbnails that appear above the open app icons
2. Sign out of the iTunes store: Settings>iTunes & App Store, click on your Apple/iTunes ID, then sign out
3. Check Settings>Safari, and make sure that "Block Cookies" is not set to "Always". If it is, change it to either of the other two options
4. Make sure you do not have Restrictions turned on. If they are turned on, make sure that access is allowed for Safari, iTunes Store, Installing Apps, and Deleting Apps
5. Reset your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). Once the Home screen redisplays sign back into iTunes and try again
Cheers,
GB -
Problem with starting Windows with external Toshiba HDD
Hello,
when i am starting windows (xp) and i have got my external disk connected, the computer cant start, he stoped in "windows start up". When i turning up the notebook without disk, it starts good. Do you know some solution?
Thank you and sorry for my bad english.And which Toshiba notebook and HDD do you have?
-
Problems with Start up after loading Parallel and adding Windows Vista
Everytime I start up my MacBook, I have to hold the option button down. Otherwise it goes into a booting up windows screen. How do I get the computer to go right to the Mac desktop, when starting up?
Thanksagent412 wrote:
Everytime I start up my MacBook, I have to hold the option button down. Otherwise it goes into a booting up windows screen. How do I get the computer to go right to the Mac desktop, when starting up?
Thanks
You have selected Vista as your boot OS.
In Leopard, open the System Preferences and under Startup Disk, select Mac OS X, 10.5.whatever and that will solve your problem.
You can also set the boot preference in Vista, but I am not sure exactly where. BootCamp installs a similar boot option in Vista or XP. -
Problems With Starting Up After Power Failure
Hi Everyone,
I'm having the strangest problem booting up (or rather, not being able to boot up) after a power outage in my neighborhood last night. What's more, it's the second night in a row that it's happened and has blocked my ability to boot into my two main drives. I installed OSX on a separate internal drive so that I can access them and they seem to be all right and have all the information on them which is good.
Here's what happened: Two nights ago my computer was on and we had a power outage which turned my computer off, of course. I don't have it set to restart after something like this so I tried to restart it in the morning. The blue progress bar makes it about a quarter of the way across and stops. I have the same OS on another drive so I started up with the Option key and chose that and everything was fine. However, the next night the exact same thing happened and I couldn't boot into that drive the following morning either so I had to install a fresh version of OSX on another drive just to get into my computer. I've used Drive Utility, Drive Warrior, Drive Genius and TechTool Deluxe to check the drives and they all say there's nothing wrong. I've tried to reset the PRAM but still can't boot up into those drives which were on when we had the outage. I have unplugged everything and nothing else in the house seems to be effected. Any suggestions? I've had many power outages over the years with my Mac on but never have I ever experienced something like this, and on both drives too! As always, any help will be greatly appreciated and needless to say, I'm turning my computer off tonight before I go to bed!Sounds like a lesson in there: don't wait to put OS X on an external drive that is usually off line.
Rush to a store or on-line and get a UPS of the 1500VA sort (APC RS would be nice, or SMART UPS 1000VA).
The directory of the drives could be corrupt.
I have all my equipment, modem, routers, the works, but we had a bad storm and one port on the router/modem is out (the one I used, the modem seems to be okay) and I am worried that the UPS's line filter for DSL in is also 'compromised.'
Storms and power outages can wRECK or cuase havoc.
It sounds like you need to map out bad sectors maybe (zero all in Disk Utility) perhaps. The directory, volume blocks, or even journal file, got scrambled. However, because no test can find it means - to me - it could be the "non user partitions" rather than OS X partition etc. Hence, zero the drive or just reformat it in full.
Why have you not ever with these outages, just continued to live w/o one? I wouldn't just shutdown, I would unplug if a storm approaches.
PS: SMC Reset button is under drive bay #4. Give it a 5-10 seconds depress. -
Problem with starting database after aborting backup
Hello,
I have following problem. I tried to do my first backup with EM. I switch my database to ARCHIVELOG mode then set location for archive redo logs to recovery flash area. Then EM asked me to make a backup. I accidentally clicked button refresh. After that I had to click "ok" few times and when I wanted to start database again I had a problem.
EM shows "Enterprise Manager is not able to connect to the database instance" and Agent Connection to Instance issues ORA-12528. I tried LSNRCTL>stop and LSNRCTL>start but it didn't resolve my problem.
In SQL Plus I can open the database but I can't mount it.
Any ideas???
I'm using Oracle 11.1.0.6.0.
Best,
SimonIn SQL Plus I can open the database but I can't mount it.This statement makes NO sense.
In order for the DB to be OPEN, first it needs to be able to MOUNT it,
using sqlplus along with CUT & PASTE show us what you do & how Oracle responds. -
I am user of Toshiba Satellite A205- S5879. It has worked correctly but lately i hava a problem. When I try to turn on my computer it shows only a screen with text: "Toshiba, leading innovation" if I press F2 i have opportunity to choose some options and then it starts to opening like previous. How make it to be like previous?
Satellite A205-S5879
I would try flashing the BIOS.
ACPI Flash BIOS version 2.50 for Satellite A205 (PSAE3U) for Windows Vista
-Jerry -
Problems with starting ifs after installation
Hi Gurus,
please help me. We have install iFS (9.0.1.0.0) on a HP machine. Starting the iFS System, the ifslaunchdc and
ifslaunchnode works fine, but starting ifsstartdomain i become following error message:
An exception occurred while starting Domain Controller - oracle.ifs.common.IfsException:
IFS-40005: Unable to find remoted object
(ifs_socket://idefix:53140/IFS.DOMAIN.DOMAINCONTROLLER.Locator)
oracle.ifs.common.IfsException: IFS-40011: Unable to connect channel
java.net.NoRouteToHostException: Timed out
In the DomainController.log file:
2/14/02 12:00 PM SocketRemoter: java.io.IOException
java.io.IOException: javax.net.ssl.SSLException: SSL handshake failed: SSLConnectionClosedGraceful
at oracle.security.ssl.OracleSSLSocketImpl.serverStartHandShake(Unknown Source)
at oracle.security.ssl.OracleSSLServerSocketImpl.accept(Unknown Source)
at oracle.ifs.common.remoted.socket.SocketRemoter$SocketRemoterRunner.run(SocketRemoter.java:1626)
And in the startdomain.log file:
February 14, 2002 12:00:17 PM CET
oracle.ifs.common.IfsException: IFS-40005: Unable to find remoted object (ifs_so
cket://idefix:53140/IFS.DOMAIN.DOMAINCONTROLLER.Locator)
oracle.ifs.common.IfsException: IFS-40011: Unable to connect channel
java.net.NoRouteToHostException: Timed out
at oracle.ifs.common.remoted.socket.OutgoingChannel.connect(OutgoingChannel.java:116)
at oracle.ifs.common.remoted.socket.SocketRemoter.sendOutgoingMessage(SocketRemoter.java:1061)
at oracle.ifs.common.remoted.socket.SocketRemoter.find(SocketRemoter.java:563)
at oracle.ifs.installer.DomainStarterWithoutGUI.getDomainControllerInterface(DomainStarterWithoutGUI.java:107)
at oracle.ifs.installer.DomainStarterWithoutGUI.tryNoGUIRemoteDCControl(DomainStarterWithoutGUI.java:70)
at oracle.ifs.installer.DomainStarter.runInSilentMode(DomainStarter.java:136)
at oracle.ifs.installer.DomainStarter.main(DomainStarter.java:74)
I tested the ports with netstat -a, all tree ports are on listing. What can i do next?
regards
HelmutHi Gurus,
I'm Hamid from India,
Please help me. I have install iFS (8.0.1.0.0) on a
Windows 2000 server. While Starting the iFS System,
i become following error message:
An exception occurred while starting ifssart.bat(Batch File)
Java<tm> Runtime Loader Verson 1.1.8
Program c:/Oracle\ora81\ifs\jre\bin\jre.exe exited with code 1
C:\Oracle\Ora81\ifs\jws\bin..\bin\jserv.exe
C:\Oracle\Ora81\ifs\jws\bin..\bin\jserv.exe
jserv: Shutting down the server
My ifsstart.bat file is :
[b]@echo off
@setlocal
rem
rem starts all iFS processes:
rem Java Web Server
rem ServerManager for iFS Agents
rem ServerManager for iFS Protocol Servers
rem
rem Copyright (c) 1999 - 2000 Oracle Corporation
rem All Rights Reserved
rem
call "C:\Oracle\Ora81\ifs\bin\ifsenv.bat"
set START_JWS=true
if /I %START_JWS%==true call %IFS_BIN%\ifsjwsstart.bat
@echo off
start "iFS ServerManager" /MIN "%IFS_JRE_HOME%\bin\jrew" -classpath %IFS_BASE_CLASSPATH% oracle.ifs.tools.ServerManagerLauncher -start "%IFS_JRE_HOME%\bin\jrew" -mx32M %IFS_BASE_CLASSPATH% "%IFS_SETTINGS%\IfsAgents.def" "%IFS_LOG%\IfsAgents.log" "%IFS_SETTINGS%\IfsProtocols.def" "%IFS_LOG%\IfsProtocols.log"
@echo on
@endlocal
and My ifsjwsstart.bat file is :
@echo off
@setlocal
rem
rem iFS JWS Server (startup)
rem
rem Copyright (c) 1999 - 2000 Oracle Corporation
rem All Rights Reserved
rem
call "C:\Oracle\Ora81\ifs\bin\ifsenv.bat"
set OHREL=\Oracle\Ora81
set CLASSPATH=
set CP=%IFS_BASE_CLASSPATH%;%IFS_HTTP_CLASSPATH%
set JAVA_HOME=
start "Java Web Server (do not close this window; use ifsstop.bat or ifsjwsstop.bat to exit)" /MIN "%IFS_JWS_HOME%\bin\jserv" -javahome "%IFS_JRE_HOME%" -javacmd jre -cp %CP% -vmargs "-mx128m -cp %OHREL%\ifs\settings;%OHREL%\ifs\jre\lib\rt.jar;%OHREL%\ifs\jre\lib\i18n.jar;%OHREL%\jdbc\lib\classes111.zip;%OHREL%\lib\vbjorb.jar;%OHREL%\jlib\xmlparserv2.jar;%OHREL%\ifs\lib\repos.jar;%OHREL%\ifs\lib\adk.jar;%OHREL%\ifs\lib\email.jar;%OHREL%\ifs\lib\tools.jar;%OHREL%\ifs\lib\utils.jar;%OHREL%\ifs\lib\release.jar;%OHREL%\assistants\jlib\jnls.jar;%OHREL%\ifs\custom_classes;%OHREL%\ifs\webui_classes;%OHREL%\ifs\lib\http.jar;%OHREL%\ifs\lib\webui.jar;%OHREL%\ifs\lib\clientlib.jar;%OHREL%\ifs\jws\lib\servlet.jar;%OHREL%\ifs\jws\lib\jst.jar;%OHREL%\ifs\jre\lib\javac.jar"
@echo on
@endlocal
would appreciate if u could please reply to the e-mail address mentioned : [email protected] -
No sound in Windows after boot Camp install
New iMac 5K, have external speakers plugged in, here sound when windows starts, but then no more......control panel shows no issues???
1. Does sound work normally with internal and external speakers on the OS X side?
2. If there are no missing drivers, and the headphone outputs are being used, please ensure the digital output is off if using analog plugs. The built-in headphone is a combined analog/digital output (unless the Mac is from 2005-2006). Usually, it will show a red laser. in the headphone receptacle. Please see Troubleshooting issues with no audio from built-in speakers on Macs - Apple Support.
3. If you have HDMI or DP sound available, check if that works, even if the analog/optical is not working. -
Problem with iWork updates after iOS 5.1 install
iTunes showed updates for my iWork apps, but indicated I needed to update to iOS 5.1 first. I updated to iOS 5.1, and then did the updates for Pages, Keynote, and Numbers. The Pages update was successful. The updates for Keynote and Numbers will not load, but now I can't use either app at all. The app shows up with the loading ticker at the bottom, but when touched, indicates "Waiting", then a message comes up that says "Unable to Download Application", with choices for "Done" or "Retry." "Retry" does nothing and the message comes up again. I've tried restarting and resetting with no success.
Thoughts?
Thanks.Here's how to fix this.
1) Get your playlist in the order you want in iTunes.
2) Create a new playlist and drag all the songs into it from the sorted playlist.
The next 2 are important!!!
3) Do not change the order using any of the column headers.
4) Do not select Copy To Play Order.
5) (Optional) Delete old playlist, rename new playlist.
Sync your device.
The problem is in the sorting. If you don't sort your playlist via the column headers you're OK.
Hope this helps. -
Have you had problems with Bridge CS6 after CR 8.4 installed?
Adobe Bridge CS6 running on Mac OS X 10.7.5 crashed several times while sorting images . After installing Camera Raw 8.4, images in portrait orientation rotated to landscape and now the rotate image buttons and menuitems are unavailable for raw files including dng's. Camera Raw preferences will not open from Bridge. What is the best approach for uninstalling/reinstalling Bridge and CR updates? Should I reinstall Photoshop as well?
I do recommend that anyone who is having weird issues with iTunes try Dave's suggestion of UNINSTALLING Flip4Mac and see what happens (but will an uninstall get rid of this particular file? who knows).
Good point, and something I should not have trusted without confirming. I just tried it and the uninstaller does not remove that framework. That's a serious "oops" on the part of Telestream (and I did confirm that the Flip4Mac installer does install that framework). The framework folder will need to be removed manually.
Regards. -
Hello. I got little problem today with bootcamp.
Few days ago I updated yousemite and bootcamp worked fine after that. Today I used yosemite and remember my partion in bootcamp is getting small and I wanted to give more space for windows. Sure I wasn`t able to just drag more space for bootcamp so I thought it could be ok to do new partion in machintosh disk in windows format as well and I made 3rd disk there as planning to be able to use that disk in windows. After that I continued my suff with os x and later tried to start windows via boot camp as I always do. Mac started reboot and suddenly black screen came and top left there was blinking line ( - ) and nothing happened after 10min.
So I just shut down my mac by pressing the on/off button and started it as os x after that. Went to disk ultility and removed that extra partion what I did earlier and tried to start windows again and same thing happened. When I`m booting my mac and pressing alt while that I`m not able to choose boot camp. I can just choose os x or recovery 10...
I also ran os x repair stuff and tried again but didn`t work. In general I think everything should be like before I did any new partion. But simply cannot choose bootcamp but I`m able to see bootcamp in disk ultility and I can choose restart mac using boot camp when using os x.
Sure I don`t have any back ups, so it`s kind a ankward. Hope I can start use windows/bootcamp without reinstall it.
So in the nutshell when I trying to boot windows when using os x I can choose start as a windows using bootcamp and after that it starts booting. After that black screen appear and I can see only white line in top left in the screen. Nothing really going to happen after that.
And when I`m booting and pressing alt I`m not able to choose bootcamp, just os x or recovery.here.
ville:~ villehietalahti$ sudo fdisk /dev/disk0
Password:
Disk: /dev/disk0 geometry: 30401/255/63 [488397168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 425910456] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 426320096 - 1269536] Darwin Boot
4: 0C 1023 254 63 - 1023 254 63 [ 427589632 - 60807168] Win95 FAT32L
ville:~ villehietalahti$ sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 80 7c 19 |........?.....|.|
00000020 00 00 00 00 80 00 80 00 ff d7 9f 03 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 e4 f1 41 28 34 42 28 f8 |..........A(4B(.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
Maybe you are looking for
-
Lightroom 4.1 Keywording
I've just noticed that all of my imported images in Lightroom 4 have been tagged with the words 'Aircraft' and 'Transport'. When I type either of these into the Lightroom search box it brings up hundreds of images none of which display either of the
-
Hello, I was trying to Performance Monitor Tool for measuring the performance of WebLogic 5.1 Server which is hosting my Web Application. My interest was to primarily record the HTTP GET and POST requests processed by the WebServer and the number of
-
I can not get a webpage to stay the size of the browser with out zooming in every time i go to a web page. With out zooming it just stay small with white on both sides. How do i get it to stay the size of the browser and stay that way Have no trouble
-
How to manage get-child item, then foreach child move the item some where
Hi, I have a directory structure like the following: RootFolder -> SubFolder1 * page1.txt * page2.txt * thumb1.jpg * thumb2.jpg -> SubFolder2 * page1.txt * thumb1.jpg Now, what I want to achieve is like I should get a directory structure like the f
-
Buffer table not up to date when searching shopping carts
Hi Friends, This is probably a common error but could not find specific note or forum threads to my specific issue. We are on SRM 5.0 Extended Classic with SP level 15. There has been no org changes or user changes. when existing user tries to pul