Problems with Steps 21-22 and 32 in Exercise 17

I have tried Exercise 17 several times and, each time, when I
get to Step 21, I do exactly as the instruction states: I select
the Login component in the Outline panel.
Step 22 refers to a "highlighted component" on the stage but
I don't see any. A couple of times, I saw handles and clicked
within the component and deleted it, as instructed.
When I return to the source view on Step 23, the Login
component is still there so I'm not sure what Step 22 was meant for
in the first place.
In any case, I proceed and, when I get to Step 32, I run the
application. But clicking the Submit button does not switch to the
reservation view.
Any ideas anyone?
Thanks!

Hi
To get the reservation form to display after clicking submit, just add a "creationComplete = "init()"" to your application tag in "ResevationSystem.mxml". This is because, the init function never gets called and hence
private  
function init():void
login.addEventListener("login",loginHandler);
"ResevationSystem.mxml" never gets called.
Your Application tag in "ResevationSystem.mxml"  should look like this
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="
absolute" xmlns:comp="
components.*" themeColor="
silver"backgroundColor="
#62627F"horizontalScrollPolicy="
off"creationComplete="init()"
>      
hope this helps
regards,
Ronald

Similar Messages

  • I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

    I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

    So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct?  Where do you look, or what do you do, that indicates the playlists are in alphabetical order?  Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
    If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe. 
    The 3rd gen shuffle uses VoiceOver.  If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details).  When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
    There are more details in the manual for the 3rd gen shuffle, which is online here
    http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
    See page 22 for the section about setting up and using VoiceOver.  The part about switching playlists starts on page 23 (Using the Playlist Menu).

  • I have been having problems with my iPod touch and my WRT...

    I have been having problems with my iPod touch and my WRT54G router. I am so frustrated right now because after following the various steps mentioned in one of these threads, following Earthlink's prompts, and speaking with Apple, my iPod touch will still not work. It is connected to the internet but will not download the pages. It is quite frustrating. I have changed from WPA to WEP, I switched the 4th Generated key to the 1st. I've disabled this, enabled that. I've done just about everything. I updated the firmware. I made the switch from a partial bridge to a full bridge. Still nothing seems to work. Does anyone have any other suggestions? The one thing I have not done is enter the Apple code into the iPod which searches for website...-- I cannot access the internet with my iPod so this web address does not work. If anyone has been successful, will you please give me step by step instructions? Yesterday I was on the phone with Linksys for about an hour. Before that with Apple for about an hour and before that with Earthlink. How it is that I can walk into a Bread Co. or Apple Store and immediately connect to the internet with my iPod but I can't in my own house?? Everyone seems to think it is someone else's problem so I've gone around and around. Not one of the Linksys support personnel suggested I look here on this community forum. I had to pay the $9 fee to have advanced Linksys help but still my iPod does not work and when I called back, the man I spoke with seemed to think the case was closed because my PC, Laptop, and iPod are connected to the internet -- the iPod just won't download the webpages or get mail. My iPod's IP address begins with 192. I would appreciate any help on this matter
    Message Edited by AlliW on 10-02-2008 02:06 PM

    I had the same issues with my iPod touch & iPhone. It's a known issue with the touch & Linksys G routers. Go into settings on the touch & do the following.
    1. Settings - wifi - linksys
    2. Erase your DNS settings & input same numbers as in router
    Settings.
    3. Http proxy should be
    in off position.
    4. Close out & open safari you should now have a wireless
    connection.

  • Problems with ESS in  "Career and Jobs" in option "Appraisal Document"

    hi
    My problem with ESS in "Career and Jobs" menu in the option "Appraisal Document" is not appear the appraisal documents or my my question is...
    What I can customize for appear the "Appraisal Documents"?
    My ESS shows the following screens:
    http://img295.imageshack.us/img295/3451/appraisalportal.jpg (there is also a problem with the flash player, I marked with red rectangle)
    I found looking on the internet that had to configure the Performance Management
    I entered in SPRO tcode, follow these steps
    http://img580.imageshack.us/img580/2598/appraisal1.jpg (Entered in "Define Templates in Performance Management")
    http://img215.imageshack.us/img215/6233/appraisal2.jpg
    http://img651.imageshack.us/img651/4243/appraisal3.jpg
    http://img340.imageshack.us/img340/622/appraisal4.jpg
    http://img52.imageshack.us/img52/1842/appraisal5.jpg (click in "End Configuration")
    http://img534.imageshack.us/img534/8746/appraisal6a.jpg (Error screen part 1)
    http://img4.imageshack.us/img4/1261/appraisal6b.jpg  (Error screen part 2)
    I hope the answers and posts, I wonder if my chosen way(configuring the Performance Managemente)  is correct
    thanks for posts
    Ivan

    thanks Chris for comments,
    Now I customize the "Appraisal Document"
    http://img18.imageshack.us/img18/4640/uiapraisal.jpg (Here I can see the evaluation that was done in the back-end)
    but, I clicked in the hiperlink of  "Appraisal Document Name",  I see this error:
    http://img80.imageshack.us/img80/8157/uiapraisal2.jpg (Error:<b>Page not found or not avaible</b>)
    even before I saw another error (<b>"There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator."</b>) in others posts(questions in sap forums) mentioned, These included the following notes
    1468466 Performance Management Launchpad Configuration
    1463821 Performance Management Portal Configuration
    1416756 OBN Configuration in Performance Management
    1408243 Configuration for object-based navigation
    They recommended me in the back-end include roles in the resources:
    http://img401.imageshack.us/img401/8048/uiapraisala.jpg
    http://img689.imageshack.us/img689/9359/uiapraisalb.jpg
    The note number 1463821(especially), I recommend the following
    <a href="https://websmp230.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1463821" target=nieves>note 1463821</a> (link note)
    http://img88.imageshack.us/img88/7484/uiapraisal1.jpg (LPD_CUST tcode)
    http://img266.imageshack.us/img266/7405/uiapraisal1b.jpg (Check in "Restricted Parameters" and "Active" - "EXT_HEAD")
    but in these notes appointing a role that I could not find on my system that is:
    pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.appraisal_document_wd_ui
    because, I was looking at my porta's role  (With reference "Appraisals Document")
    http://img97.imageshack.us/img97/5167/uiapraisal3a.jpg
    http://img413.imageshack.us/img413/5643/uiapraisal3b.jpg
    http://img534.imageshack.us/img534/4585/uiapraisal3c.jpg
    http://img203.imageshack.us/img203/4605/uiapraisal3d.jpg
    Finally, my main error is :<b>Page not found or not avaible</b> (I referred at the beginning of the post http://img80.imageshack.us/img80/8157/uiapraisal2.jpg)
    Why I see this error (Page not found or not avaible)?
    http://img80.imageshack.us/img80/8157/uiapraisal2.jpg (Error:Page not found or not avaible)
    I hope the helps, and thaks very much.
    Ivan

  • Problem with Indesign CC 2014 and tables

    Problem with Indesign CC 2014 and tables. The text rearranges itself when I delete or add something in a table; the footnotes to the text associated with the overlap even getting unreadable. Just click on the chain symbol in the window and everything is fine. Why?

    try circumventing your cc app and see if that helps:
    if you follow all 7 steps you can directly download a trial here:  Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

  • I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

    I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • Problems with AOL e-mail and Droid Charge

    Problems with AOL e-mail and Droid Charge
    After setting up my AOL email account on my Charge, it has been syncing new messages ok, but I've been having other problems:
    - Syncing AOL mail: I have the Charge set to sync 50 emails (set up the same way as my Comcast Account) but the AOL account pulls up the last 50 old emails and delivers them to the phone. (Comcast does not do this). If I delete these old messages, it just pulls up the same amount of even older mail. Very frustrating. Because of the 2nd problem below, some of these messages were actually deleted on my AOL account before I realized what was happening. It seems I have to just keep 50 old mails on my Charge to prevent this from happening. Any ideas?
    - Second problem (kinda related) Deleting Old Mail: When I delete AOL emails I have read on the Charge, they are also deleted from my 'old mail' folder on AOL and sent to deleted mail. This is not how it worked on my BB Storm2. After deleting them with the Storm, the AOL mail would show them as read and put them in 'old mail' unless I told the Storm to delete them from the server. I cannot find any "choice" option on the Charge. I hate this because the "deleted mail" folder on AOL dumps its contents much more quickly than the "old mail" folder. How do I stop this from happening?
    FYI, both Comcast and g-mail are working as they should.....
    Thanks,

    Dear Richs10,
    As to the second problem, I have seen this before in other threads. The only solution I can come up with is to delete the AOL account and set it up on the phone from scratch. The reason for this is that the ONLY time you are able to see the option for leaving email on the server (or removing them) after reading on the phone is during the account setup process. After the account is set up, there seems to be no way to access this setting again. Kind of dumb, IMHO, but that seems to be the case.
    If you need step-by-step walkthrough of the account setup, PM me.

  • I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

    I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

    After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
    iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

    columbus new boy wrote:
    How crap is that?
    It's not crap at all.
    It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
    There has to be a solution.
    Why not simply make a playlist with the songs you want on the iPhone?
    and maintain a current backup of your computer.

  • I tried downloading a free app and it asked for my billing information and when i entered it, it says that there was a billing problem with a previoud purchase and i have to update it. I keep updating it and it wont let me verify it and i cant get apps

    I tried downloading a free app and it asked for my billing information and when I entered it, it said that there was a billing problem with a previous purchase and I have to update it. I keep updating it and it wont let me verify it and I cant get any apps even if they are free, and I just Deleted some apps to make room for my new upate!

    The message says: "The payment method has been denied, try another method"
    I'm living in the same country and city since I was born, so I don't think the location is the problem.
    And yes, I paid with the card a meal in Burguer King today. And nothing more.

  • HT3552 I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

    I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

    Have a look here >  http://support.apple.com/kb/TS1646

  • Communication problem with Adobe 9.0 and HP Printer when I scan

    I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
    Thanks.

    Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0   Had to go to Adobe 6.0
    Date: Thu, 17 Dec 2009 03:19:49 -0700
    From: [email protected]
    To: [email protected]
    Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
    May be that the HP software doesn't support Adobe Reader 9.
    >

  • Problem with java swing button and loop

    Problem with java swing button and loop
    I�m using VAJ 4.0. and I�m doing normal GUI application. I have next problem.
    I have in the same class two jswing buttons named start (ivjGStart) and stop (ivjGStop) and private static int field named Status where initial value is 0. This buttons should work something like this:
    When I click on start button it must do next:
    Start button must set disenabled and Stop button must set enabled and selected. Field status is set to 1, because this is a condition in next procedure in some loop. And then procedure named IzvajajNeprekinjeno() is invoked.
    And when I click on stop button it must do next:
    Start button must set enabled and selected and Stop button must set disenabled.
    Field status is set to 0.
    This works everything fine without loop �do .. while� inside the procedure IzvajajNeprekinjeno(). But when used this loop the start button all the time stay (like) pressed. And this means that a can�t stop my loop.
    There is java code, so you can get better picture:
    /** start button */
    public void gStart_ActionEvents() {
    try {
    ivjGStart.setEnabled(false);
    ivjGStop.setEnabled(true);
    ivjGStop.setSelected(true);
    getJTextPane1().setText("Program is running ...");
    Status = 1;
    } catch (Exception e) {}
    /** stop button */
    public void gStop_ActionEvents() {
    try {
    ivjGStart.setEnabled(true);
    ivjGStart.setSelected(true);
    ivjGStop.setEnabled(false);
    getJTextPane1().setText("Program is NOT running ...");
    Status = 0;
    } catch (Exception e) {
    /** procedure IzvajajNeprekinjeno() */
    public void IzvajajNeprekinjeno() {  //RunLoop
    try {
    int zamik = 2000; //delay
    do {
    Thread.sleep(zamik);
    PreberiDat(); //procedure
    } while (Status == 1);
    } catch (Exception e) {
    So, I'm asking what I have to do, that start button will not all the time stay pressed? Or some other aspect of solving this problem.
    Any help will be appreciated.
    Best regards,
    Tomi

    This is a multi thread problem. When you start the gui, it is running in one thread. Lets call that GUI_Thread so we know what we are talking about.
    Since java is task-based this will happen if you do like this:
    1. Button "Start" is pressed. Thread running: GUI_Thread
    2. Event gStart_ActionEvents() called. Thread running: GUI_Thread
    3. Method IzvajajNeprekinjeno() called. Thread running: GUI_Thread
    4. Sleep in method IzvajajNeprekinjeno() on thread GUI_Thread
    5. Call PreberiDat(). Thread running: GUI_Thread
    6. Check status. If == 1, go tho 4. Thread running: GUI_Thread.
    Since the method IzvajajNeprekinjeno() (what does that mean?) and the GUI is running in the same thread and the event that the Start button has thrown isn't done yet, the program will go on in the IzvajajNeprekinjeno() method forever and never let you press the Stop-button.
    What you have to do is do put either the GUI in a thread of its own or start a new thread that will do the task of the IzvajajNeprekinjeno() method.
    http://java.sun.com/docs/books/tutorial/uiswing/index.html
    This tutorial explains how to build a multi threaded gui.
    /Lime

  • Memory Problem With 4gb Crucial Ballistix and Asus M4A785TD-V EVO

    motherBoard: ASUS M4A785TD-V EVO
    bios Version :2005
    Video: amd hd5750
    Processor: AMD PHENON II X2 550 3.100MHZ
    Memory: Crucial
    Modele Memory: blt4g3d1608dt1tx0
    Capacity: 4GB
    greetings to all
    i have asus m4a785td-v evo mobo. i ve bought 4 gb crucial ballistix ram today. it says on product its 1600 mhz and cl8 but it shows on my pc 1333 mhz and cl9.  when i was searching for this problem i came across this topic: http://forum.crucial.com/t5/Crucial-Ballistix-gaming-memory/Memory-Probleme-With-8GO-Crucial-Ballistix-and-Asus-M4A785TD-V/td-p/9464 can i apply the same settings? how can i fix that?  is it possible via bios settings? thx in advance and sry for my bad english. here is some screenshots: 

    I am not good at RAM setting but the 'Timings Table' shows there is XMP-1600 profile available so I believe it would be enough to turn on that memory profile in BIOS.

  • TS1646 hello  I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

    hello 
    I have problem with regist my visa and I cannot buy from store
    the message came in the end of form is says
    the phone number must be a 7-digit number
    and I have writed but not accepted
    iam from saudi arabia
    my mobile is 966504850992
    pls answer
    thanks
    dfr aldossary

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Maybe you are looking for

  • HT1550 No longer able to create ALAC version of a WAV file.

    When I select a WAV file, song or album I bring up the menu and am offered, 'Create a WAV Version'. It is already a WAV file, why I would I want to create another. How come I am no Longer being able offered thje 'Create ALAC version Option? Anyone kn

  • Limitations in SAP

    Hai To all, I want to know what are the limitations in SAP B1 2005A Please Help me....Its Urgent.... Regards, Anitha

  • Hyperion Enterprise 6.3 API related and No MODAPPDLL parm

    I am trying to utilize Hyperion Enterprise 6.3 API to connect to file based application and extract data. I have not had much success with it. I am using 'C/C++' apis and calling EntOpenApplication() to connection to the application after I call CoIn

  • 1-2 bars, 2' away?

    I recently set up an Airport Extreme base station for two friends who got matching 15" G4 laptops, also equipped with Airport Extreme cards. One PBook is upstairs with the base station, sitting about two feet away. The other is downstairs on a dining

  • Webcam issue with Skype and MSN messanger on Satellite A300

    Hi. Well. Contacted Toshiba Australia. and got some information. Well, the person I spoke to said that he would try to find the drivers on the Toshiba European website, which he did. And he said to uninstall my camera assist software. So I did, downl