Problems with stuck/dead pixels, battery life, ICS, and other problems

Stuck/Dead Pixels:
I bought my Droid Razr at around the 21st of December last year. On or around Christmas, I found a bright red pixel on the very bottom of my screen. Unlucky for me, I was leaving for Florida on Christmas Night. I got back on December 31st. Sometime in the first week of this year, I visited my verizon store and told the customer service lady that I had a dead pixel on my screen and had just bought it. But, she told me that she needed the manager to fix this and there was no manager there. For the next week I was busy with school and sports etc and was not able to go back to the store. It was now past my 14 day return period. So I decided, its only one pixel, most people won't notice it anyway. So here I am 5 months later, just starting to discover more pixels dying on my screen. I now have the one bright red one, two light blue ones, and one dark red. I have no idea what the return policy is on defective phones, and the verizon site is designed so that you can't find anything. And an FYI, I have tried stuck pixel removers and other apps, which  haven't been successful.
Battery Life:
I have also been finding more problems with my phone. The battery life is terrible when 4G and even 3G are on. I actually see no difference in battery consumption between 3G/4G.  My battery dies  about 4-5X faster when data is turned on, compared to using no data. I know it isn't because of the apps I installed since when I use WiFi, the battery is alright. I also make sure that my RAM isn't above 400MB, so that the processor doesn't use a lot of battery. I feel like I completely wasted my money buying the Razr. Mainly because of the fact that the Razr Maxx was announced two weeks later, which has about 80% more battery. Not only this, but I've seen the Razr selling for only ONE PENNY on amazon over the past month and it still is. I payed $300 on my Razr.
Ice Cream Sandwich:
After these major problems comes another one, that I bet all Razr and Razr Maxx customers are still thinking about. When will I get Ice Cream Sandwich? It is very disappointing when you are told that you will be getting an upgrade in early 2012, and are still wondering where your upgrade is 5 full months in. From what I understand, we won't see an upgrade until the end of June, since Motorola has posted on their website that "rollouts" would begin in the second quarter. Even if they release it by the end of June, when will it get to your phone? Maybe another week or two for some people. This is another thing that I feel I wasted my money on. My brother told me to get the Nexus because of ICS, but I trusted Motorola that they would upgrade my phone in a timely manner. WRONG.
Phone Freezing:
One more problem that I've had is that the phone will freeze. Usually you only need to turn the screen off and on, but once in a while, you have to completely reboot your phone. When I was coming back from Florida, right as I was about to get home, my phone completely froze. I was about to go return it, but after about 15-20 minutes, it became unfrozen.
Motion Sensor not functioning:
Another problem, an annoying one, is that sometimes the motion sensor that controls portrait and landscape mode will just stop working. Some of the games I play are completely dependent on the motion sensor. It is very embarrassing  when you are trying to show off to an iPhone friend and major components of your phone aren't working. They always tell me "why didn't you get an iPhone?". And I really just wanted to have a phone that didn't look like everyone else's, but I guess that comes at a cost. When the motion sensor stops working, I have to shut down my phone and restart, which takes a couple minutes.
Problems with camera:
My last problem would be with the camera. Sometimes if you bring the camera close to something, like a barcode, it will keep trying to focus, but never will. Another problem is photo quality in low light situations. It seems like the camera can't focus because it goes from being very dark into being bright because of the flash. I doubt this can be fixed because it's hardware, but a potential fix could be having the option to keep the LED light on during picture mode, that way the camera will be able to focus correctly.
In Conclusion:
I really just want someone to tell me how to return my phone for a new one, due to the dead pixels. I also wish I could be upgraded to the Razr Maxx because of the poor battery life on the Razr, but from what other people are saying, that probably won't happen. And finally, if anyone has more info about Ice Cream Sandwich, that would be awesome.

Well since it's a Manufacturing Error it should Fall under your Warranty if you got one with your Razr. You know you can Call C.S. an they can Assist you with the Matter on it.. Just remember to have another phone so they can Trouble shoot the One that is Experiencing the Issue an when you talk to them go over thing. An they should send you C.G.A.N unless they request you to send it in before you get anther one. If you feel Better going to the Store try that. And Good Luck.. 

Similar Messages

  • Is anyone else having a problem with the iPhone 4s Battery Life?  My 1 year old Iphone 4, which I gave to my wife, is holding a charge better and she has been using it far more than I've been using my 4s

    My wife preordered a white iPhone 4s for our anniversary and even though it is preloaded with the ios 5, i am a little disappointed.  The battery doesn't seem to hold a charge well at all. I have had every other iphone except the 3gs and have never had such a poor battery life.  I owned the iPhone 4 for a year, and already know all the tricks to hold on to battery life, I have adopted the habit of closing out any apps that weren't being used, my mail push notifications are set for hourly, wifi and bluetooth are turned off when they aren't needed.  I also stay away from any car chargers, use only the apple brand supplied cables, and only charge when the phone is dead.  I only would sync when the phone was about to die as well. 
    When I saw how fast I was burning through the battery, I turned off Siri, which is kind of the purpose of the new iPhone, and turned off the backing up to iCloud.  I barely used my phone today and the battery kept ticking down.  My wife, who has been stuck with an iPhone 3g for years, has been fascinated with my old iPhone 4 and has been browsing and playing games and her battery has been holding a better charge than my new phone.  I even tried turning the phone off for an hour when it was at 18% and when I turned it back on, it was at 15%. My iPhone 2, which is only being used as a touch iPod now, still has better standby time than a brand new iPhone 4s. 
    To be honest, I am usually a heavy phone user.  Throughout the day I will make and receive at least 50 calls, I browse and check websites daily and watch videos sometimes during my downtime.  But this weekend, I haven't even had the chance to put this phone through the same abuse my other 3 iPhones have had to endure. 
    I just want to know if anyone else has this problem, or if I should just return this one.   

    I had major issues with the iPhone 4s battery, however it’s resolved.
    The tech who set the phone up at the Apple store did so with little training.
    if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
    Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
    turning of locator and the push notifications from facebook--they have a lot!

  • Anyone having problems with there iphone 5 battery life been very poor

    I have had the iphone 5 for 4 weeks now and the battery life is very very poor at first i thought it must just be how it is....was dissapointed tho from fully charged to flat in 4 hours with little use or going to bed and waking up with the battery life going down 17%!!! but then 1 day i charged it fully and it never went down for ages, over 24 hours and it still had 25% this lasted for about 4 days then all of a sudden back to been rubish, i sent it in to apple who returened it without doing a single thing (apart from scratched an dented the bottom!!) it was exactly the same ..poor.....but then last night i charged it took it off charge at 6pm (english time) and now at 00.42am the day after it still has 11%....clearly ther is a fault somewere!!! has anyone had the same experience or got any tips for me please?
    cheers, Danny

    krue12 wrote:
    Yes a lot of people are having this issue it's from the ios 6 update. Some users are reporting battery drains a lot after updating their device
    There have always been a lot of battery problems posted about in these forums following each and every iOS update.  Personally, I believe that the battery really isn't discharging any faster, it is just that the charging circuit is confused and needs to be reset. I always perform a setup as a new phone for major updates, for example iOS3 to iOS4, 4 to 5, 5 to 6, which should be a 'reset' for the charging system, but I do a simple update for point releases--6.0 to 6.0.1, etc.  I have never had a problem with battery performance when performing the full update as new, only when I did a 'normal' update for a point release.  If I perform an update with a restore from the old backup after a major update the battery problem did appear.
    After every iOS point update I always do a full reset--home and on/off buttons held down until the Apple appears--three or four times over the course of a couple of days.  I allow the phone to fully charge overnight every night.
    This has always resulted in 'normal' battery life after one or a few reset cycles.  By 'normal' I mean that a fully charged iPhone, with email and other notifications enabled and set to push, and no particular attention paid to battery conserving techniques, will discharge to about 89% over a 10 hour day.  If I make a few phone calls and surf the web a bit then the level has fell to 70% or so, but unless I heavily use my iPhone 5 it doesn't drop below that point.
    Prior to performing the resets the charge level would sometimes drop into the 50's or 60's or even lower in a few hours without using the iPhone.  This problem 'scenario' has happened with every iPhone I have ever owned and I've owned all but the original iPhone.
    As always, YMMV.  I make no claims as to its usability for anyone else.

  • Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

    When the installation is done according to the documentation,
    web access does not work because the scripts that add entries to
    the jserv.properties file add duplicate references to
    wrapper.env and wrapper.classpath. Look at the jserv.properties
    file below and look at the remarked-out (#) lines of the
    duplicate references. For example, look at the references to the
    wrapper.env=LD_LIBRARY_PATH
    Oracle, please note this bug so the web access problems are
    minimized when the product is intstalled.
    Thank you,
    William T.
    # Apache JServ Configuration
    File #
    ################################ W A R N I N G
    # Unlike normal Java properties, JServ configurations have some
    important
    # extensions:
    # 1) commas are used as token separators
    # 2) multiple definitions of the same key are concatenated in
    a
    # comma separated list.
    # Execution parameters
    # The Java Virtual Machine interpreter.
    # Syntax: wrapper.bin=[filename] (String)
    # Note: specify a full path if the interpreter is not visible in
    your path.
    wrapper.bin=/d3/Apache/jdk/bin/java
    # Arguments passed to Java interpreter (optional)
    # Syntax: wrapper.bin.parameters=[parameters] (String)
    # Default: NONE
    wrapper.bin.parameters=-Xms64m
    wrapper.bin.parameters=-Xmx128m
    # Apache JServ entry point class (should not be changed)
    # Syntax: wrapper.class=[classname] (String)
    # Default: "org.apache.jserv.JServ"
    # Arguments passed to main class after the properties filename
    (not used)
    # Syntax: wrapper.class.parameters=[parameters] (String)
    # Default: NONE
    # Note: currently not used
    # PATH environment value passed to the JVM
    # Syntax: wrapper.path=[path] (String)
    # Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
    # "c:\(windows-dir);c:\(windows-system-dir)" for Win32
    systems
    # Notes: if more than one line is supplied these will be
    concatenated using
    # ":" or ";" (depending wether Unix or Win32) characters
    # Under Win32 (windows-dir) and (windows-system-dir) will
    be
    # automatically evaluated to match your system
    requirements
    # CLASSPATH environment value passed to the JVM
    # Syntax: wrapper.classpath=[path] (String)
    # Default: NONE (Sun's JDK/JRE already have a default classpath)
    # Note: if more than one line is supplied these will be
    concatenated using
    # ":" or ";" (depending wether Unix or Win32) characters.
    JVM must be
    # able to find JSDK and JServ classes and any utility
    classes used by
    # your servlets.
    # Note: the classes you want to be automatically reloaded upon
    modification
    # MUST NOT be in this classpath or the classpath of the
    shell
    # you start the Apache from.
    wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
    wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
    wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
    # An environment name with value passed to the JVM
    # Syntax: wrapper.env=[name]=[value] (String)
    # Default: NONE on Unix Systems
    # SystemDrive and SystemRoot with appropriate values on
    Win32 systems
    wrapper.env=PATH=/d3/bin
    # An environment name with value copied from caller to Java
    Virtual Machine
    # Syntax: wrapper.env.copy=[name] (String)
    # Default: NONE
    # Uncomment the following lines to set the default locale and
    NLS_LANG
    # setting based on the environment variables.
    # wrapper.env.copy=LANG
    # wrapper.env.copy=NLS_LANG
    # Copies all environment from caller to Java Virtual Machine
    # Syntax: wrapper.env.copyall=true (boolean)
    # Default: false
    # Protocol used for signal handling
    # Syntax: wrapper.protocol=[name] (String)
    # Default: ajpv12
    # General parameters
    # Set the default IP address or hostname Apache JServ binds (or
    listens) to.
    # If you have a machine with multiple IP addresses, this address
    # will be the one used. If you set the value to localhost, it
    # will be resolved to the IP address configured for the locahost
    # on your system (generally this is 127.0.0.1). This feature is
    so
    # that one can have multiple instances of Apache JServ listening
    on
    # the same port number, but different IP addresses on the same
    machine.
    # Use bindaddress=* only if you know exactly what you are doing
    here,
    # as it could let JServ wide open to the internet.
    # You must understand that JServ has to answer only to Apache,
    and should not
    # be reachable by nobody but mod_jserv. So localhost is usually a
    # good option. The second best choice would be an internal
    network address
    # (protected by a firewall) if JServ is running on another
    machine than Apache.
    # Ask your network admin.
    # "*" may be used on boxes where some of the clients get
    connected using
    # "localhost"and others using another IP addr.
    # Syntax: bindaddress=[ipaddress] or [localhost] or [*]
    # Default: localhost
    bindaddress=localhost
    # Set the port Apache JServ listens to.
    # Syntax: port=[1024,65535] (int)
    # Default: 8007
    port=8007
    # Servlet Zones parameters
    # List of servlet zones Apache JServ manages
    # Syntax: zones=[servlet zone],[servlet zone]... (Comma
    separated list of String)
    # Default: NONE
    zones=root
    # Configuration file for each servlet zone (one per servlet zone)
    # Syntax: [servlet zone name as on the zones list].properties=
    [full path to configFile]
    (String)
    # Default: NONE
    # Note: if the file could not be opened, try using absolute
    paths.
    root.properties=/d3/Apache/Jserv/etc/zone.properties
    # Thread Pool parameters
    # Enables or disables the use of the thread pool.
    # Syntax: pool=true (boolean)
    # Default: false
    # WARNING: the pool has not been extensively tested and may
    generate
    deadlocks.
    # For this reason, we advise against using this code in
    production environments.
    pool=false
    # Indicates the number of idle threads that the pool may contain.
    # Syntax: pool.capacity=(int)>0
    # Default: 10
    # NOTE: depending on your system load, this number should be low
    for contantly
    # loaded servers and should be increased depending on load
    bursts.
    pool.capacity=10
    # Indicates the pool controller that should be used to control
    the
    # level of the recycled threads.
    # Syntax: pool.controller=[full class of controller] (String)
    # Default: org.apache.java.recycle.DefaultController
    # NOTE: it is safe to leave this unchanged unless special
    recycle behavior
    # is needed. Look at the "org.apache.java.recycle" package
    javadocs for more
    # info on other pool controllers and their behavior.
    pool.controller=org.apache.java.recycle.DefaultController
    # Security parameters
    # Enable/disable the execution of org.apache.jserv.JServ as a
    servlet.
    # This is disabled by default because it may give informations
    that should
    # be restricted.
    # Note that the execution of Apache JServ as a servlet is
    filtered by the web
    # server modules by default so that both sides should be enabled
    to let this
    # service work.
    # This service is useful for installation and configuration
    since it gives
    # feedback about the exact configurations Apache JServ is using,
    but it should
    # be disabled when both installation and configuration processes
    are done.
    # Syntax: security.selfservlet=true (boolean)
    # Default: false
    # WARNING: disable this in a production environment since may
    give reserved
    # information to untrusted users.
    security.selfservlet=true
    # Set the maximum number of socket connections Apache JServ may
    handle
    # simultaneously. Make sure your operating environment has
    enough file
    # descriptors to allow this number.
    # Syntax: security.maxConnections=(int)>1
    # Default: 50
    security.maxConnections=50
    # Backlog setting for very fine performance tunning of JServ.
    # Unless you are familiar to sockets leave this value commented
    out.
    # security.backlog=5
    # List of IP addresses allowed to connect to Apache JServ. This
    is a first
    # security filtering to reject possibly unsecure connections and
    avoid the
    # overhead of connection authentication.
    # <warning>
    # (please don't use the following one unless you know what you
    are doing :
    # security.allowedAddresses=DISABLED
    # allows connections on JServ'port from entire internet.)
    # You do need only to allow YOUR Apache to talk to JServ.
    # </warning>
    # Default: 127.0.0.1
    # Syntax: security.allowedAddresses=[IP address],[IP Address]...
    (Comma
    separated list of IP addresses)
    #security.allowedAddresses=127.0.0.1
    # Enable/disable connection authentication.
    # NOTE: unauthenticated connections are a little faster since
    authentication
    # handshake is not performed at connection creation.
    # WARNING: authentication is disabled by default because we
    believe that
    # connection restriction from all IP addresses but localhost
    reduces your
    # time to get Apache JServ to run. If you allow other addresses
    to connect and
    # you don't trust it, you should enable authentication to
    prevent untrusted
    # execution of your servlets. Beware: if authentication is
    disabled and the
    # IP address is allowed, everyone on that machine can execute
    your servlets!
    # Syntax: security.authentication=[true,false] (boolean)
    # Default: true
    security.authentication=false
    # Authentication secret key.
    # The secret key is passed as a file that must be kept secure
    and must
    # be exactly the same of those used by clients to authenticate
    themselves.
    # Syntax: security.secretKey=[secret key path and filename]
    (String)
    # Default: NONE
    # Note: if the file could not be opened, try using absolute
    paths.
    #security.secretKey=./etc/jserv.secret.key
    # Length of the randomly generated challenge string (in bytes)
    used to
    # authenticate connections. 5 is the lowest possible choice to
    force a safe
    # level of security and reduce connection creation overhead.
    # Syntax: security.challengeSize=(int)>5
    # Default: 5
    #security.challengeSize=5
    # Logging parameters
    # Enable/disable Apache JServ logging.
    # WARNING: logging is a very expensive operation in terms of
    performance. You
    # should reduced the generated log to a minumum or even disable
    it if fast
    # execution is an issue. Note that if all log channels (see
    below) are
    # enabled, the log may become really big since each servlet
    request may
    # generate many Kb of log. Some log channels are mainly for
    debugging
    # purposes and should be disabled in a production environment.
    # Syntax: log=[true,false] (boolean)
    # Default: true
    log=true
    # Set the name of the trace/log file. To avoid possible
    confusion about
    # the location of this file, an absolute pathname is recommended.
    # This log file is different than the log file that is in the
    # jserv.conf file. This is the log file for the Java portion of
    Apache
    # JServ.
    # On Unix, this file must have write permissions by the owner of
    the JVM
    # process. In other words, if you are running Apache JServ in
    manual mode
    # and Apache is running as user nobody, then the file must have
    its
    # permissions set so that that user can write to it.
    # Syntax: log.file=[log path and filename] (String)
    # Default: NONE
    # Note: if the file could not be opened, try using absolute
    paths.
    log.file=/d3/Apache/Jserv/logs/jserv.log
    # Enable the timestamp before the log message
    # Syntax: log.timestamp=[true,false] (boolean)
    # Default: true
    log.timestamp=true
    # Use the given string as a data format
    # (see java.text.SimpleDateFormat for the list of options)
    # Syntax: log.dateFormat=(String)
    # Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
    log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
    # Since all the messages logged are processed by a thread
    running with
    # minimum priority, it's of vital importance that this thread
    gets a chance
    # to run once in a while. If it doesn't, the log queue overflow
    occurs,
    # usually resulting in the OutOfMemoryError.
    # To prevent this from happening, two parameters are used:
    log.queue.maxage
    # and log.queue.maxsize. The former defines the maximum time for
    the logged
    # message to stay in the queue, the latter defines maximum
    number of
    # messages in the queue.
    # If one of those conditions becomes true (age > maxage || size
    maxsize),# the log message stating that fact is generated and the log
    queue is
    # flushed in the separate thread.
    # If you ever see such a message, either your system doesn't
    live up to its
    # expectations or you have a runaway loop (probably, but not
    necessarily,
    # generating a lot of log messages).
    # WARNING: Default values are lousy, you probably want to tweak
    them and
    # report the results back to the development team.
    # Syntax: log.queue.maxage = [milliseconds]
    # Default: 5000
    log.queue.maxage = 5000
    # Syntax: log.queue.maxsize = [integer]
    # Default: 1000
    log.queue.maxsize = 1000
    # Enable/disable logging the channel name
    # Default: false
    # log.channel=false
    # Enable/disable channels, each logging different actions.
    # Syntax: log.channel.[channel name]=[true,false] (boolean)
    # Default: false
    # Info channel - quite a lot of informational messages
    # hopefully you don't need them under normal circumstances
    # log.channel.info=true
    # Servlets exception, i.e. exception caught during
    # servlet.service() processing are monitored here
    # you probably want to have this one switched on
    log.channel.servletException=true
    # JServ exception, caught internally in jserv
    # we suggest to leave it on
    log.channel.jservException=true
    # Warning channel, it catches all the important
    # messages that don't cause JServ to stop, leave it on
    log.channel.warning=true
    # Servlet log
    # All messages logged by servlets. Probably you want
    # this one to be switched on.
    log.channel.servletLog=true
    # Critical errors
    # Messages produced by critical events causing jserv to stop
    log.channel.critical=true
    # Debug channel
    # Only for internal debugging purposes
    # log.channel.debug=true
    #wrapper.classpath=/d3/ord/jlib/ordim.zip
    #wrapper.classpath=/d3/ord/jlib/ordhttp.zip
    # Oracle XSQL Servlet
    wrapper.classpath=/d3/lib/oraclexsql.jar
    # Oracle JDBC
    wrapper.classpath=/d3/jdbc/lib/classes12.zip
    # Oracle XML Parser V2 (with XSLT Engine)
    wrapper.classpath=/d3/lib/xmlparserv2.jar
    # Oracle XML SQL Components for Java
    wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
    # XSQLConfig.xml File location
    wrapper.classpath=/d3/xdk/admin
    # Oracle BC4J
    wrapper.classpath=/d3/ord/jlib/ordim.zip
    wrapper.classpath=/d3/ord/jlib/ordvir.zip
    wrapper.classpath=/d3/ord/jlib/ordhttp.zip
    wrapper.classpath=/d3/BC4J/lib/jndi.jar
    wrapper.classpath=/d3/BC4J/lib/jbomt.zip
    wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
    wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
    wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
    wrapper.classpath=/d3/BC4J/lib/jboremote.zip
    wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
    wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
    wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
    wrapper.classpath=/d3/BC4J/lib/collections.jar
    wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
    #wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
    ineOrders.jar
    # The following classpath entries are necessary for EJBs to run
    in IAS or DB when
    present
    wrapper.classpath=/d3/lib/aurora_client.jar
    wrapper.classpath=/d3/lib/vbjorb.jar
    wrapper.classpath=/d3/lib/vbjapp.jar
    # Oracle Servlet
    wrapper.classpath=/d3/lib/servlet.jar
    # Oracle Java Server Pages
    wrapper.classpath=/d3/jsp/lib/ojsp.jar
    # Oracle Util
    wrapper.classpath=/d3/jsp/lib/ojsputil.jar
    # Oracle Java SQL
    wrapper.classpath=/d3/sqlj/lib/translator.zip
    # Oracle JDBC
    #wrapper.classpath=/d3/jdbc/lib/classes12.zip
    # SQLJ runtime
    wrapper.classpath=/d3/sqlj/lib/runtime12.zip
    # Oracle Messaging
    wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
    wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
    # OJSP environment settings
    #wrapper.env=ORACLE_HOME=/d3
    # The next line should be modified to reflect the value of the
    SID for your
    webserver.
    #wrapper.env=ORACLE_SID=cmpdb
    #wrapper.env=LD_LIBRARY_PATH=/d3/lib
    ## Enable the flag below if you are using jdk 1.2.2_05a or above
    #wrapper.env=JAVA_COMPILER=NONE
    # Advanced Queuing - AQXML
    wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
    #wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
    #wrapper.classpath=/d3/lib/xmlparserv2.jar
    wrapper.classpath=/d3/lib/xschema.jar
    #wrapper.classpath=/d3/jlib/jndi.jar
    wrapper.classpath=/d3/jlib/jta.jar
    oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
    g.properties
    zones = root, oemreporting
    wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
    wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
    wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
    wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
    wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
    wrapper.classpath=/d3/jlib/regexp.jar
    wrapper.classpath=/d3/jlib/sax2.jar
    #wrapper.classpath=/d3/jlib/servlet.jar
    wrapper.bin.parameters= -DORACLE_HOME=/d3
    #wrapper.env=LD_LIBRARY_PATH=/d3/lib32
    wrapper.env.copy=DISPLAY
    wrapper.bin.parameters=-DORACLE_HOME=/d3
    #wrapper.classpath=/d3/lib/vbjorb.jar
    #wrapper.classpath=/d3/lib/vbjapp.jar
    wrapper.classpath=/d3/classes/classesFromIDLVisi
    wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
    wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
    wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
    wrapper.classpath=/d3/jlib/share-1_1_9.jar
    wrapper.classpath=/d3/jlib/help-3_2_9.jar
    wrapper.classpath=/d3/jlib/ice-5_06_3.jar
    wrapper.classpath=/d3/jdbc/lib/classes111.zip
    wrapper.classpath=/d3/classes
    wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
    wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
    wrapper.classpath=/d3/jlib
    wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
    wrapper.classpath=/d3/jlib/jssl-1_1.jar
    wrapper.classpath=/d3/jlib/netcfg.jar
    wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
    #wrapper.classpath=/d3/lib/aurora_client.jar
    #wrapper.classpath=/d3/lib/xmlparserv2.jar
    wrapper.classpath=/d3/network/jlib/netmgrm.jar
    wrapper.classpath=/d3/network/jlib/netmgr.jar
    wrapper.classpath=/d3/network/tools
    wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
    wrapper.classpath=/d3/sysman/jlib/netchart360.jar
    wrapper.classpath=/d3/jlib/pfjbean.jar
    wrapper.env=SHLIB_PATH=/d3/lib32
    wrapper.env=LIBPATH=/d3/lib32
    wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
    wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
    wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
    wrapper.classpath=/d3/lib/mail.jar
    wrapper.classpath=/d3/lib/activation.jar
    wrapper.classpath=/d3/ultrasearch/jsp/admin/config
    # Additions for iFS
    ## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
    # iFS true
    # Uncomment if you want to use the same Jserv as other
    applications
    wrapper.classpath=/d3/9ifs/custom_classes
    wrapper.classpath=/d3/9ifs/settings
    wrapper.classpath=/d3/9ifs/lib/adk.jar
    wrapper.classpath=/d3/9ifs/lib/email.jar
    wrapper.classpath=/d3/9ifs/lib/http.jar
    wrapper.classpath=/d3/9ifs/lib/release.jar
    wrapper.classpath=/d3/9ifs/lib/repos.jar
    wrapper.classpath=/d3/9ifs/lib/utils.jar
    wrapper.classpath=/d3/9ifs/lib/webui.jar
    wrapper.classpath=/d3/9ifs/lib/provider.jar
    wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
    wrapper.classpath=/d3/jlib/jssl-1_2.jar
    wrapper.env=ORACLE_HOME=/d3
    wrapper.env=ORACLE_SID=cmpdb
    wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
    wrapper.env=NLS_LANG=.US7ASCII
    ## Additions for the iFS zone
    # Uncomment if you want to use the same Jserv as other
    applications
    zones=ifs
    ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
    # End iFS section

    About your home page; Manually set up Firefox with the window(s) and tab(s)
    the way you want them to be. Then;
    '''''Firefox Options > General > Homepage'''''.
    Press the button labeled ''''Use Current'''.'
    =====================================
    Open a new window or tab. In the address bar, type '''''about:config'''''.
    If a warning screen comes up, press the '''''Be Careful''''' button.
    This is where Firefox finds information it needs to run.
    At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
    and press enter. '''''browser.newtab.url'''''
    tells Firefox what to show when a new tab is opened.
    If you want, right click and select '''''Modify'''''. You can change the
    setting to;<BR><BR>about:home (Firefox default home page),<BR>
    about:newtab (shows the sites most visited),<BR>
    about:blank (a blank page),<BR>
    or you can enter any web page you want.<BR><BR>
    The same instructions are used for the new window setting, listed as
    '''''browser.startup.homepage'''''.

  • My iphone 5 does not remember the password of my home network. Well this is ot the case with my ipad. The wifi gets disconnected every 2 minutes. Its not any problem with my wifi router as my ipad and other devices work fine. So how do i fix this problem?

    Well my iphone 5 does not remember my home network. This is not a problem with the wifi router as the ipad works absolutely fine. The wifi loses it connection in just 2 minutes. So could you please fix this problem.

    Not unless the modem is causing a problem.
    What you want to do is get it to work reliably over Ethernet first, then tackle wifi. Power off the modem. On your macbook, delete the Ethernet configuration and the Wifi configuration. Power up the modem, then connect the mac via Ethernet. Create the new Ethernet configuration and see if you can connect.

  • Fixing the problem with the Device Not Recongized by WMP and Mediasource problem with MTP devi

    PLEASE READ THE WHOLE THING!!! I KNOW IT SOUNDS LIKE MANY OTHER FAILED SOLUTIONS BUT YOU HAVE TO READ THROUGH MY WHOLE POST TO MAKE IT WORK!!!TRUST ME!!!
    ok, now I read this a billion times, and felt that I was the only idiot that had a "bad" computer that didn't allow me to use my Zen mtp device... but it turns out I was more idiotic than I thought. I hope this helps those who have the same problem I had...here goes...
    When you go to the Creative Labs website, go to Support, then Knowledge Base, then go to the MP3 players picture in the PRODUCT CATEGORY and click on it. You need to follow the steps that are described on the SID0053 Product Article. Then click on the Editing the System Registry link towards the bottom and it will tell you what to do...BUT there is something that I never ever did right and I bet lots of other folks didn't do right either. Once you are in the USB Properties seccion of the registry, YOU ACTUALY HAVE TO ADD THE WORD "EVERYONE" INTO THE ALLOWED SECCION!!! Not just because it says "Administrators" and what not means that EVERYONE IS ALLOWED, allow the word "everyone"thne click OK. Now, I did this with my Zen Touch on and plugged into the USB port and without the word DOCKED on it, as it wouldn't dock for me before this. that's it... hope it works for you, if it does then almost instantly the word DOCKED should appear on your MP3 player's Display. Hope that everyone has the same luck as I did. if not, I'll pray for you, I know how frustrating this problem is because I delt with it for toooooo long.

    I had a similar problem with my Zen Touch, but the only symptom was not being able to install MediaSource or the Software Suite. I got the same messages that you did. I was able to use Windows Explorer to add/edit/remove files, but I wanted the Zen Media Explorer so that I could create playlists. After about 2 days of research and trial and error, I ended up fixing it by uninstalling/reinstalling the drivers.
    If you don't know how to do that, here are instructions...
    I'm using XP SP2, btw, so if you're using another version of Windows, it might be slightly different...
    ) With the Zen connected, Right-click on "My Computer"
    2) Select "Properties"
    3) Click on the "Hardware" tab and select "Device Manager"
    4) Right Click on "MTP Device" (or MTP Media Player) and select "Uninstall"
    5) Disconnect the player from the computer, wait about 5 secs, and reconnect.
    When you reconnect it, the drivers will be reinstalled. Try running the setup again after that.
    If that still doesn't work, look for random optional Windows updates, maybe?...esp. PlaysForSure, WMP, or USB/mobo/INF/Chipset driver updates...or maybe when it says "Setup could not detect and portable device on your system. Setup will now install the necessary drivers to enable your device to be detected," it actually <i>is</i> doing something, but it isn't apparent until you reinstall the driver. To be honest, I just don't know. The computer I'm using is only a few months old and I didn't have any problems installing on an older computer.
    Oh well. I hope that fixes your problem.
    As far as the problem with the 360 connectivity, I'm sorry I can't help you there.Message Edited by potestasx on -03-2006:28 PM
    Message Edited by potestasx on -03-2006:45 PM

  • Problem with type displaying as 'fractions' in gmail and other webpages

    can anyone help me... When certain emails (within gmail) come in they are readable as fractions, yes like maths!! Also some sites I've entered are the same?? I'm sure it's something simple within Safari but cann't figure it out!! Many thanks!!!

    You probably need to find and get rid of the font Helvetica Fractions. It's not compatible with OS X.

  • My Iphone 5 regularly goes dead with 30% battery life shown and when i plug it in it comes right back to 30% is this a flaw or can this be fixed

    My Iphone 5 regularly goes dead with 30% battery life shown and when i plug it in it comes right back to 30% is this a flaw or can this be fixed

    I had the same issue with mi iPhone 4S and now with my iPhone 5 sometimes. I think is software related but I couldn't find more info about it

  • My iPad mini is stuck at 100% battery life (HELP!)

    My ipad mini has been stuck on 100% battery life all day and when I unplug it, it dies shortly after. I have to keep it plugged it to use it but it gets annoying.
    Its been stuck on 100% and has not gone down yet !
    I have tried turning it off, rebooting it, I checked my settings to see if I have done anything wrong, but nothing is working!
    Any suggestions on what I should do to solve this problem?

    Suggestion 1:  Run the device completely dead - and then recharge it.
    Suggestion 2:  Restore the device to factory settings (backup first).
    Suggestion 3:  Apple Genius Bar or Contact Apple support for a diagnostic test.
    Make a Genius Bar Reservation (or cancel an existing reservation)
    http://www.apple.com/retail/geniusbar/
    Sign in using your Apple ID
    AppleCare US phone number: (800)-694-7466
    Contact Apple for support and service
    http://support.apple.com/kb/HE57

  • How to cope with a dead pixel

    Yes, I know, there's no fix for a dead pixel (is there?), and there are lots of maybe-fixes for a "stuck" pixel. Well, I have a dead pixel, super-dead, in a really terrible place (the lower right quadrant, just a tad above where, say, the iTunes ministore would be). I'm stuck with it. I can't do anything to get it fixed or replaced (can I?), so my question to the community is about dealing with it. How does one cope with something so aggravating? Are there some tweaks one can do to make, say, white web pages reverse their colors so the pixel is not as apparent? Are there other methods to get rid of it or make it less obvious? I'm going mad. Someone help. <<br>
    Macbook 2ghz   Mac OS X (10.4.7)   1GB RAM 120GB HDD

    Well , I do understand how crazy it can drive you when a pixel is dead. Everything was fine on my MB then about a month in I noticed a pixel that was dead, I too looked at every topic I could find on the subject, nothing helped. So I took my MB into my local Apple Store, they sent it off to repair. Of course Apple did not fix because "One pixel is not considered enough of a problem to repair". So the Apple Store actually ordered me a new screen and replaced it for free.
    I was very happy until I turned on the computer at the A.S. and once again it had a dead pixel in a different spot. they said that there was nothing they could do about it. They would not replace it again because it would screw up their store budget. So I'm learning to deal with it. Believe me it really *****, I'm a perfectionist at it really bugs me to see this flaw. Other than that my MB is great and I love it. Good Luck!

  • Hello, I have a problem with my iphone 4 battery, it looses 20% over the night with wifi on and without receiving any phone call or notification. It also uses 1 or 2% each time I check my iphone even if it is just to check up my messages. Is it normal?

    Hello, I have a problem with my iphone 4 battery, it looses 20% over the night with wifi on and without receiving any phone call or notification. It also uses 1 or 2% each time I check my iphone even if it is just to check up my messages. Is it normal? Please someone give me a solution

    Yes this is fairly normal. When you have wifi on the phone, it drains the battery life of the device.
    Here is an article that has some tips that you can follow so you can modify the settings on your device to extend it's battery life to the fullest.
    http://www.apple.com/batteries/iphone.html

  • Problem with my iPhone 4s battery/charge.

    Hi all,
    I have a problem with my Iphone 4s battery / charge. I read through different forums and blogs and I found that some other users has my same problem.
    My phone is loosing charge faster than anytime before. All started two weeks ago, before iOs 6.1.3 release. I use to charge the phone up to 100% every night. One mornign, i switched on the phone and I could no hear the typical sound of the screen unlocked. In addition the keyboard made no sound. I tried to control the volume with the side buttons, but once I pressed one of the two, nothing appeared under the speaker / sound logo. I left the phone just for a while and then the sound was back on. From that day till today, this thing is happening everytime i switched on the phone after a recharge.
    PLUS, I noticed that the phone is loosing the charge very fast. About 10% every hour, even in stand by mode.
    I tried to switch off all the email account and do and hard reset, but nothing changed.
    I bought the phone 10 months ago.
    What I have to do?
    Many thanks
    Niko

    I would like to know the answer to that one.  I realized this was happening just after upgradeing my iOS to 6.  Then when I looked up my purchase date, I was about 5 days past my one year warranty.  So I'm dead in the water.  Apple will replace the battery, but it will be about $80+.  I took it to the Apple store, and they checked a bunch of stuff, but said that it seemed ok.  I'm debating getting a battery for a more reasonable price off of ebay.  But if it's the iOS thats draining the battery, then I'm not going to be able to help it.  I wish I knew a better way to tell if its the battery, the phone, or the iOS.

  • How to fix stuck/dead pixel on my iPad 2

    I just got an iPad 2 and I found out that there is a stuck/dead pixel on the screen. I thought that I could ignore it at the beginning but it just gets too annoying and it grabs my eye when doing anything. So I need to fix it. But first I need to know is it dead or stuck.
    On some colors it appeared in two different colors, it changes each time I look at it from different position.
    So on white : blue and red
    On black : it does not appear
    On purple : red and blue
    On red : blue and red (so it does not appear)
    On blue : black and blue
    I hope I gave enough information. Waiting for your help...
    P.S. I entered on YouTube and saw a video called stuck pixel fixer or something like that and I opened it for like three minutes each day for about three days now, and it did not fix it, do I need to play it for a specific time? Or do I need something else?

    there is an app (cant remeber the name sorry) but it it basical flix up soild images of colour (red,blue,yellow ect...) and it did it at a speed to try and shake the pixel into working agian, sorry i cant remember the name....but its sumit like screen cleaner or sumit like that.

  • HT6114 i have a problem with notification of service battery since i installed mavericks. My macbook air is 2012 version.

    i have a problem with notification of service battery since i installed mavericks. My macbook air is 2012 version. Any solution?

    This from the crash log
    Dyld Error Message:
      Library not loaded: /System/Library/Frameworks/Accounts.framework/Versions/A/Accounts
      Referenced from: /System/Library/StagedFrameworks/Safari/Safari.framework/Safari
    indicates there is a missing library on your system. What problems were you having before that caused you to delete Safari? How did you delete it?
    You're best bet in this case is to re-install the OS. While doing a re-install will not normally harm your user data having a good working backup in cases like this is essential.

  • Does anyone know what's up with the iPhone 4s' battery life? Some days it last a long time and other days it drains extremely fast.

    Does anyone know what's up with the iPhone 4s' battery life? Some days it last a long time and other days it drains extremely fast.

    Not to point out the obvious, but battery life depends very much on what is running and how much the device is being used.
    If the battery lasts longer on a day you make no phone calls, but lasts less the day you make 5 hour long calls, this is to be expected.
    If however the iPhone has the same level of use on both days, with different power consumption, this would infer a background process (or App) is trying to do something (connecting to server or creating a back up etc).
    I switched off all thrid party apps from being included in my iCloud backup, which saves a huge amount of space on the cloud and allows the back up to take barely a couple of minutes.
    Battery life seems ok so far on my 64GB 4S (Bluetooth on, Wi-Fi on, Location Services on, Push notifications on, Screen set to just under half brightness with Auto Adjust on)

Maybe you are looking for

  • Old GR/IR balances

    Hi experts, If i run MB5S, i found few documents lying in the system with GR/IR balances. If i want to clear these documents what are the different options available.? 1) If I want to settle to vendor, (for the GRs done for the POs few years back), i

  • A few questions needed to finalize a program...

    Alright, me and 2 friends have basically written our own sections of the program, and since we're still learning java, don't really know how to bring the three of them together. The program consists of 2 applets (Transposer and History) and an applic

  • PAN No as madatory field in Vendor Master CIN Details

    Hi, I want to make PAN No as madatory field in Vendor Master CIN Details. Can anyone help. Regards, Anurag Khanna

  • Finally about to decomission the Lync 2010 Edge. Small question

    Getting ready to finally decommission our Lync 2010 Edge in favor of a 2013 Edge. The only reason I have kept the 2010 Edge around was because we still have a single 2010 FE server. All our users are on 2013 FE servers so the 2010 FE is just sitting

  • Need help exporting animation to Wordpress (I've looked at all the tutorials I could find).

    Alright, I've been working on a slide show animation for sometime now, but I need to export it to wordpress and I can't exactly understand how to do it correctly. I've even used the edge wordpress plugin, but it doesn't seem to work at all (I tried o