Problems with Sun Fire 280 Server...

Hi
I am facing a problem in sun-fire 280 server. It
consists of two 80 GB scsi HDD and a DVD ROM. When i
rebooted the server, it throwed some following scsi
error.
unknown scsi: WARNING: /pci@8, 700000/scsi
@6 (glm0):
SCSI bus DATA IN phase parity eror
SCSI bus DATA IN phase parity eror
WARNING: Device PSO failure detected by sesor
PSO_FAULT_SENSOR
The out put of show-disks cmd is as follows
a) /pci@8,600000/SUNW,qlc@4/fp@0,0/disk
b) /pci@8,700000/scsi@6,1disk
c) /pci@8,700000/scsi@6/disk
The output of probe-scsi-all is as follows.
/pci@8,600000/SUNW,qlc@4
/pci@8,700000/scsi@6,1
Fatal SCSI eror at script address 8 Illegal
instruction
Fatal SCSI eror at script address 8 Illegal
instruction
/pci@8,700000/scsi@6
Fatal SCSI eror at script address 8 Illegal
instruction
Fatal SCSI eror at script address 8 Illegal
instruction
Pls help me out, I desparetly need to up the this
server.
thanx in advance
skm my friend

Hi
Thanks for replay, but according to you replay i check my all sutaible HW problems like cable PSU etc but alls are fine for work, If you have any other possible couse please tell me....
Thank you
Mohammed Tanvir

Similar Messages

Problems with sun update connection server ?

recently I've been having problems with accessing the update connection web server.
Can't get in with Firefox sometimes - get blank pages, or 401 error pages.
Then today with IE, hitting the help page on the top right, I get:
Sun ONE Application Server - HTTP Status 500 Error
The server encountered an internal error (Internal Server Error) that prevented it from fulfilling this request.
Type: Exception Report
Message: Internal Server Error
Exception
java.lang.RuntimeException: The icon attribute of an Icon component was set to MASTHEAD_MINI_IMAGE. The Theme does not contain an image of that name.
     at com.sun.web.ui.theme.Theme.getIcon(Theme.java:534)
     at com.sun.web.ui.renderer.SucPopupMastheadRenderer.renderEnd(SucPopupMastheadRenderer.java:114)
     at com.sun.web.ui.renderer.AbstractRenderer.encodeEnd(AbstractRenderer.java:235)
     at javax.faces.component.UIComponentBase.encodeEnd(UIComponentBase.java:720)
     at javax.faces.webapp.UIComponentTag.encodeEnd(UIComponentTag.java:623)
...

The URL is correct and it works for us no problem. I don't believe anyone else has reported this problem so I guess it must be working for everyone else as well.
Can you detail exactly what error you get, and what browser type/version you are using.
Can you also see if you can access this URL: https://srsnetconnect3.sun.com

Problem with SUN Iplanet App server 6.0

The iPlanet server hangs suddenly with one of the KJS engines being halted. Following is the error message we see in logs.
The only thing we do is to restart the server, to bring it to normal state again. We also tried increasing the JVM size to 256mb from 128mb . But still having this problem.
Can any one help us on this issue?
Thanks,
Srini.
[09/Nov/2004 17:25:24:1] error: Exception: SERVLET-execution_failed: Error in ex
ecuting servlet StaticServlet: java.lang.NullPointerException
Exception Stack Trace:
java.lang.NullPointerException
at com.netscape.server.deployment.AppCompGDSUtil.getDescriptorFromGDSByK
ey(Compiled Code)
at com.netscape.server.deployment.WebAppCompGDSUtil.getDescriptorFromGDS
ByKey(Compiled Code)
at com.netscape.server.deployment.AppComponentDescriptorUtil.createWebAp
pComponentDescriptorCore(Compiled Code)
at com.netscape.server.deployment.DescriptorManager.getWebAppDescriptorF
romCache(Compiled Code)
at com.netscape.server.servlet.servletrunner.StaticServlet.service(Compi
led Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at com.netscape.server.servlet.servletrunner.ServletInfo.service(Compile
d Code)
at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Compi
led Code)
at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
[09/Nov/2004 17:25:24:2] info: REQ-012: thread add

Hi Friends,
I have installed SUN Iplanet App server 6.0. I want to save some file in the system using Iplanet server and want to access that file using Iplanet.
could anyboby help me?
Thanks,
Sunil Jain

Problems with Sun One Web Server 6.1 with SP1

I get errors while compiling my JSP files on SUN one Web Server which is deployed on Solaris 9. it states that cannot compile JSP pages. here is the stack trace that i get.
[03/Feb/2007:19:11:17] warning ( 354): CORE3283: stderr: java.lang.NoClassDefFoundError: com/sun/tools/javac/Main
[03/Feb/2007:19:11:17] warning ( 354): CORE3283: stderr:      at org.apache.jasper.compiler.SunJava14Compiler$JavacTask.run(SunJava14Compiler.java:207)
[03/Feb/2007:19:11:17] failure ( 354): for host 192.168.123.2 trying to GET /reports1/jsp/common/ClientInstall.jsp, service-j2ee reports: StandardWrapperValve[jsp]: WEB2792: Servlet.service() for servlet jsp threw exception
org.apache.jasper.JasperException: WEB4000: Unable to compile class for JSP
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:312)
     at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.loadJSP(JspServlet.java:756)
     at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.access$000(JspServlet.java:616)
     at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:401)
     at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:363)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:586)Please help. The Java version i am using is j2sdk1.4.2_08.

It looks like the Web Server has somehow been configured to use a JRE. Web Server requires a JDK. The following message in particular indicates that a JRE, not a JDK, is being used:java.lang.NoClassDefFoundError: com/sun/tools/javac/MainAre you using the JDK that shipped with Web Server, or did you attempt to configure Web Server to use a different JDK?

Problems with Sun One Web Server 6.1 javax.xml.xpath package not found

I used myeclipse to build an xml app and tested on jboss. it worked perfectly. However when i deployed it to our solaris sun one web server the app fell apart completely with the following error. I m unable to figure out what went wrong. Any help will be much appreciated.
Thanks.
[11/Dec/2007:22:12:37] failure (13539):      for host 121.247.233.169 trying to GET /feeds/rss.jsp, service-j2ee reports: StandardWrapperValve[jsp]: WEB2792: Servlet.service() for servlet jsp threw exception
     org.apache.jasper.JasperException: WEB4000: Unable to compile class for JSP
     /opt/SUNWwbsvr/test/ClassCache/test/_jsps/_feeds/_rss_jsp.java:8: package javax.xml.xpath does not exist
     import javax.xml.xpath.*;
     ^

Thanks for the response. I tried to use xalan package which resolved the javax.xml.xpath package not found error (xalan.jar in WEB-INF/lib folder). However I m now getting the following error. Probably incompatible version is the reason. Please advise!
[11/Dec/2007:23:46:28] failure (17028):      for host 121.247.233.169 trying to GET /feeds/rss.jsp, service-j2ee reports: StandardWrapperValve[jsp]: WEB2792: Servlet.service() for servlet jsp threw exception
     javax.servlet.ServletException: org.apache.xpath.XPathContext.<init>(Z)V
     at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:536)
     at _jsps._feeds._rss_jsp._jspService(_rss_new_jsp.java:627)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:107)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.service(JspServlet.java:687)
     at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:459)
     at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:375)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
     ----- Root Cause -----
     java.lang.NoSuchMethodError: org.apache.xpath.XPathContext.<init>(Z)V
     at org.apache.xpath.jaxp.XPathImpl.eval(XPathImpl.java:207)
     at org.apache.xpath.jaxp.XPathImpl.evaluate(XPathImpl.java:281)
     at _jsps._feeds._rss_new_jsp._jspService(_rss_jsp.java:165)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:107)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.service(JspServlet.java:687)
     at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:459)
     at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:375)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)

Problem with sun app server startup

hi,
i am getting problem with sun app server default start.the error is::
[#|2006-03-01T13:54:35.121+0530|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop. Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components. |#]
now i am useing Win Xp operating system,
show me a solution.
Regs..
Narasimha

You haven;t specified the exceptions you r getting ........while starting your default server.
if u r getting exception about InetClass then connect your system with LAN/Internet then your problem will be solved becoz i m using same location address as you specified, space doesn't matter at all - i think so, it is running fine........

How to install Oracle VM server on Sun Fire v100 server

Hi All
I have just a Sun Fire V100 Server.
How to install Oracle VM server on Sun Fire v100 server?
Thankyou and best regards,
Thiensu

user8248216 wrote:
I have install Oracle VM Server successful on PC Core 2 dual 2.93Ghz.
But Oracle VM Server does not detect onboard Network card.Your NIC needs to be supported by Oracle Linux 5 Update 3 to work with Oracle VM Server 2.2. If it's too new, then it will not be seen. Also, please start a new topic for each question. This new question is not relevant to the original topic.
Edited by: Avi Miller on Aug 19, 2011 12:46 PM

Experience with Sun Fire 4800 and OVM 3.0.3?

Greetings,
We are looking to confirm with "first hand experience" if Oracle VM 3.0.3 works on the Sun Fire 4800 server platform.
We would really appreciate your comments about your experience running Oracle VM 3.0.3 on the Sun Fire 4800 series platform.
Thank you,
Roddy

I have been able to install Oracle VM on X4800 3.0.3 if thats whats you mean, I however having a few other issues with using Pillar Axiom FC plugins with it, I have ongoing SR on it. The release note(http://docs.oracle.com/cd/E26996_01/e18546.pdf) for OracleVM 3.0.3 provides some useful hints for installing the server on a 4800.

I have problem with login in sql Server give me support .pre login handshake

I have problem with login in sql Server give me support .pre login handshake

The following threads are on the same topic:
http://www.sql-server-performance.com/forum/threads/pre-login-handshake-error-when-connecting-to-db.687/
http://stackoverflow.com/questions/12308340/sql-server-2000-connection-error-pre-login-handshake
http://dbaspot.com/sqlserver-server/458011-error-occurred-during-pre-login-handshake-microsoft-sql-server-error-10054-a.html
Kalman Toth Database & OLAP Architect
IPAD SELECT Query Video Tutorial 3.5 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Problem with sun outlook connector, Microsoft LDAP services

Dear All
I have big problem with sun outlook connector and I can find any way to fix the problem,
I am using sun java system connector deployment to create installation script for my clients.
in the tool I have specify the location of Microsoft LDAP services, I am using outlook 2003 and sun say this option is not needed for outlook 2003, if I try to create the script and run the script on target client I will receive below error,
I tried the office CD-ROM as path for LDAP services but the outlook connector says there is no LDAP services on the CD and I receive same error,
19:02:29 [5365] Outlook version is 11.0.5608.0.
19:02:29 [5376] Adding MAPI directory 'C:\Program Files\Common Files\System\MAPI\1033' to PATH.
19:02:29 [5475] TMP directory is 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp'.
19:02:31 [5362] Checking Windows version.
19:02:31 [5363] Windows version is 5.1.
19:02:31 [5364] Checking Outlook version.
19:02:31 [5509] Checking default mail client.
19:02:31 [5508] Default mail client is 'Microsoft Outlook'.
19:02:31 [5178] Verifying that Outlook is not running.
19:02:31 [5179] Trying to login to shared session.
19:02:31 [5369] Installing Sun Java System MAPI Service Providers using 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp\Sun Outlook Connector\sunone-mapi-services.msi'.
19:02:32 [5502] Upgrading the Sun Java System MAPI Service Providers.
19:02:40 [5370] Finished installing Sun Java System MAPI Service Providers.
19:02:40 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
19:02:40 [5367] Sun Java System MAPI Service Providers are installed.
19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
19:02:41 ERROR: Microsoft LDAP Directory MAPI Service Provider must first be installed.
Best regards
Mo

This is likely to depend on the version of the OC you have. The released one isn't supposed to work with Outlook 2003. Please contact Tech Support for the latest version and help.

Problem with Sun Outlook connector Microsoft LDAP Directory MAPI Service Pr

Dear All
I have big problem with sun outlook connector and I can find any way to fix the problem,
I am using sun java system connector deployment to create installation script for my clients.
in the tool I have specify the location of Microsoft LDAP services, I am using outlook 2003 and sun say this option is not needed for outlook 2003, if I try to create the script and run the script on target client I will receive below error,
I tried the office CD-ROM as path for LDAP services but the outlook connector says there is no LDAP services on the CD and I receive same error,
19:02:29 [5365] Outlook version is 11.0.5608.0.
19:02:29 [5376] Adding MAPI directory 'C:\Program Files\Common Files\System\MAPI\1033' to PATH.
19:02:29 [5475] TMP directory is 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp'.
19:02:31 [5362] Checking Windows version.
19:02:31 [5363] Windows version is 5.1.
19:02:31 [5364] Checking Outlook version.
19:02:31 [5509] Checking default mail client.
19:02:31 [5508] Default mail client is 'Microsoft Outlook'.
19:02:31 [5178] Verifying that Outlook is not running.
19:02:31 [5179] Trying to login to shared session.
19:02:31 [5369] Installing Sun Java System MAPI Service Providers using 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp\Sun Outlook Connector\sunone-mapi-services.msi'.
19:02:32 [5502] Upgrading the Sun Java System MAPI Service Providers.
19:02:40 [5370] Finished installing Sun Java System MAPI Service Providers.
19:02:40 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
19:02:40 [5367] Sun Java System MAPI Service Providers are installed.
19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
19:02:41 ERROR: Microsoft LDAP Directory MAPI Service Provider must first be installed.
Best regards
Mo

Hi,
Have a look at:
http://forum.java.sun.com/thread.jspa?messageID=9320116
Directions on the installation/configuration and requirements of the outlook connector (for 2005Q4 since you haven't told us what version of the comm suite you are using) are available at docs.sun.com e.g.
http://docs.sun.com/app/docs/prod/2783#hic
Outlook connector requires that you have UWC (a.k.a communication express) installed and configured, which has it's own requirements. UWC provides the single web-interface to mail & calendar & address-book. Outlook uses the address-book functionality via UWC, IMAP and SMTP for messaging/email, plus WCAP for calendar.
Regards,
Shane.

How do I get connected to a server on my network via an IP address? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

Solaris 8 & Sun Fire 280

Does Solaris 8 support 32-bit kernel ?
Does Sun Fire 280 boot Solaris 8 32-bit kernel ?

I just installed Solaris 8 on an old Ultra1 and it is using 32bit versions, now, if I can get this X working....

Login problem in sun fire V490 through Hyper terminal

I am a new user of sun Solaris 10 . In my sun fire v490 server every thing is configured fine there is no fault in booting .But when I configured the file /etc/inet/hosts in solaris 10 and missed to configure the file /etc/inet/netmask and /etc/inet/ipnodes, due to which server is not allow me to login there is an error occur " unable to login" . Now what is the other way to login into server console. I am entering in the console using normal mode, should I try to login in using diagnostic mode., or is there any other way to login into and modify the file. I also need training videos of solaris configuration .
Help in this regard will be highly appreciable.

I don't think the test-scsi command is viable for that platform.
The FC disks are "viewed" by the system as external to the SCSI controller, almost as if they were in a multi-pack.
They are FC drives addressed by the chipset as SCSI disks.
Try:
<pre>probe-scsi-all</pre>
Edit:
Which release of Solaris 10 are you trying to install?
Older releases that might be fine for V480's won't work on V490's.
Edited by: rukbat on Mar 27, 2012 2:35 PM

How to install windows 2012 R2 in Sun Fire X4140 server

I want to install Windows server 2012 R2 in Sun Fire X4140 server. But SIA not supporting this OS. So I installed windows 2008 using SIA in server and after that upgrade to 2012. But now the server is very slow and network gets hanged frequently.

Hello Arun,
Sun Fire X4140 server certified and supports only below windows operating systems.
https://wikis.oracle.com/display/SystemsComm/Sun+Fire+X4140+Server+Product#SunFireX4140ServerProduct-MicrosoftWindowsServer
Best Regards
Bavyesh

Problems with Sun Fire 280 Server...

Similar Messages

Maybe you are looking for