Problems with Superdrive (with MacBook and iMac)

Hi there,
the superdrives in Macs are very picky. I got a MacBook (white, 10.5.7) and an iMac (24" white, 10.5.7). Both of them do not run most of optical media (Verbatim, Maxell ... I tried many brands).
In the meantime I am unable to burn CDs/DVDs with both of my Macs. With Toast it works seldom but sometimes. With iTunes and Finder it is not possible anymore. The error is:
"The attempt to burn a disc has failed..."
I searched the web and this problem is well known in the communities. But there is no fix for it. At least I did not find any.
What can I do to fix my superdrives? I burnt less than 50 CD-Rs with the drive and it is not working anymore. Seems to be a bad deal.
Any ideas? Thank you!

Well, the lens cleaner helped exactly nothing (manufacturer: hama). The problem is unsolved. Just tried to burn a CD with Toast on my 24" iMac. It worked with good luck this time. But It ried to burn a CD with Waveburner and iTunes with no succes. I used Verbatim CD-Rs. The drive spins up and down and you can hear some noise like the label of the CD gets scratched by the recorder.
This is very frustrating. The same is with my MacBook. But the MacBook does even not accepted the lens cleaning CD. The drive is completely useless at this time.
Any hints out there?
Thanks with tears...

Similar Messages

Problem with MacBook and TimeCapsule (with Workaround)

Hi,
thought it might be helpful to post my recent experience with my new MacBook (2,4GHz) and my *Time Capsule*.
I am using the Time Capsule as my main WLAN router and for backup. Reproducible, the MacBook (with OSX 10.5.6, all Airport updates applied; TimeCapsule with most recent firmware update 4.7.1) corrupts the TimeCapsule connection when waking up from sleep. Whenever the MacBook wakes up from sleep, it tries to (re-) connect to my wireless network. The airport sign in the menu bar changes from light grey bars to dark bars and the connection time counter appears next to it; but just a second later the counter disappears again, although the Airport signal bars are staying black. The result is that there's no wireless connectivity anymore; even the Airport admin software cannot find the TimeCapsule anymore. Furthermore, all other Macs (I have an additional iMac) loose there connections as well. Only thing that helps here is to restart the TimeCapsule (by disconnecting the power cord). After that, both MacBook and iMac can access the TimeCapsule again and everything works as normal.
This whole scenario can completely be reproduced and only happens when the MacBook tries to (re-) establish its Internet connection after wake-up from sleep. When I shut down the MacBook and boot normally, the MacBook connects without any problems.
After several hours of finding a solution, I've called Apple Support - and they told me that this is a *known bug*, but they currently have *no solution* for it. According to the Apple Support guy, I was not the first to report this problem (which was somehow a relief, but on the other hand a surprise as I haven't found similar problem descriptions on Mac forums yet), but they couldn't tell when and how the problem will be fixed. (Of course, they also recommended applying the most recent software updates (which I had) and resetting PRAM (which I did) - without any success.)
As now I got the impression that this is a bug with the current Late 2008 MacBook (it has a Broadcom BCM43xx based Airport Extreme Card) which I cannot solve myself, I looked at least for a workaround. I realised that this error doesn't occur when I turn Airport off before sending the MacBook to sleep, and activating it some safe time after waking up again. With the great resources at macosxhints.com, I found a small program called "Sleepwatcher" and a scripting addition called "XNetwork". Sleepwatcher runs as a demon in the background and can execute small tasks before a Mac goes to sleep and after it wakes up. XNetwork allows you to turn on and off Airport from within AppleScript (or the OpenScript Architecture). Now I use Sleepwatcher to turn off Airport just before my MacBook goes to sleep, and use it as well to (re-) activate Airport with a safe delay of 10 seconds after my MacBook wakes up again.
As of now, this works just fine (and as it should right out of the box...) - so I can wait more relaxed until Apple comes up with a real solution for this problem!
Sorry, this has become quite a long post - but maybe it is helpful for anyone.
Cheers,
Mark

I believe this was the problem I was experiencing at first, but it is now worse!
TC works fine EXCEPT for the AirPort feature when also using AirPort on my MacBook (late 2008, Unibody).
At first it seemed random, but I can now reproduce the problem at will. The TC stops working and the light goes solid amber or even no light at all sometimes.
The scenario is the following:
TC works fine, I have an iBook G4 connected via ethernet and can surf the web; iPod touch (1st gen) can surf the web as well; everyone's happy. Turn on the MacBook with AirPort on, TC stops working; light goes amber or sometimes stays solid green (I configured it to flash on activity) or completely off. iBook and iPod can't surf the web. AirPort Utility does not even see the TC (hit Rescan many times, no luck). Restart TC by unplugging, waiting 20 seconds or so, plug it back, light is solid amber; AirPort Utility still does not see the TC. Repeat this a few times, waiting in between, no success. Turn off AirPort on the MacBook, unplug and plug the TC, it is now working in less than 30 seconds. iBook and iPod can surf the web; connect the MacBook via ethernet to the TC, everyone is still happy. Turn on AirPort on the MacBook, TC stops working. You get the picture. It has been 2 days now where I can reproduce this constantly.
I have an AirPort Express that I use to stream music, which extends the TC. My DSL modem/router is in bridge mode where the TC connects via PPPoE. My configuration has been the same for almost 2 years problem free. I reset the modem too but the above scenario still applies.
I did a hard reset of the TC by holding the reset button at the back until the light flashed amber rapidly. I re-entered all the configuration again, but still no luck.
I re-installed OS X 10.5.7, no luck. The firmware on the TC is 7.4.1 (74100.25). The AirPort card on the MacBook is listed as Broadcom BCM43xx 1.0 (5.10.38.35)
I set the log level to debug on the time capsule and entered the IP address of the iBook (which is connected via ethernet), but I could not find anything in the system.log or other logs via the Console application.
When the TC is working and I then turn on AirPort on the MacBook, this is the last entries from the logs on the TC:
Jun 11 20:20:12 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +1 seconds).
Jun 11 20:20:13 Severity:5 Connection accepted from [fe80::20a:95ff:fea9:9426%bridge0]:60705.
Jun 11 20:20:14 Severity:5 Connection accepted from [fe80::20a:95ff:fea9:9426%bridge0]:60706.
Jun 11 20:29:01 Severity:5 Associated with station 00:23:6c:80:47:60
Jun 11 20:29:01 Severity:5 Installed unicast CCMP key for supplicant 00:23:6c:80:47:60
Jun 11 20:29:02 Severity:7 Public address reported as 67.55.21.207 to 192.168.1.16:5353
Jun 11 20:29:02 Severity:5 Binding added for udp, 67.55.21.207:32770 to 192.168.1.16:4500 with lifetime 3600
Jun 11 20:29:02 Severity:5 Binding added for udp, 67.55.21.207:32771 to 192.168.1.16:5353 with lifetime 3600
(Severity 5 is 'Notice', 7 is 'Debug')
I turned on AirPort on the MacBook at 20:29 and then nothing after those few lines; in this last case, the TC light was solid green but the iBook or iPod could not surf the web (it was flashing green with activity just before as I opened a web page on the iBook).
Still no solutions as of yet...

I have a problem with macbook pro OS 10.5.8 and cannot play youtube anymore, before Yes

i have a problem with macbook pro mac os 10.5.8 and cannot play youtube but before ther is no problem abou this. now there is warning sign to install adobe flash player, but when i install adobe it said cannot be compatible, and I went to the apple store, they sid need to upgrade the system to mac IOS 10.6 and i dont want to spend much... somebody to help me this

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
This, Adobe Flash Player 12.0.0.70, is the current version of Flash. It should work with Snow Leopard or later.

I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?

I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?
Do Not post stuff about how Airplay doesnt work, because i dont have Apple TV and dont need to hear about it.

If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

Mail is sluggish on macbook and iMac - on iPhone it is quick to send. What's up with that?

Mail is sluggish on macbook and iMac - on iPhone it is quick to send. It sometimes will take the better part of a minute to be sent out. On the phone it is quick. Could it have something to do with the phone being on 4G while the laptop and desktop are wifi?

Hi,
Instead of using Adobe Reader try to convert your files through Export PDF.
Kindly refer to this link :https://cloud.acrobat.com/exportpdf
Please let us know if you require further assistance.
Regards,
Florence

Problem with Facetime and my MacBookPro camera

Hello,
I've got a MacBookPro and I have a problem with Facetime and my front camera.
When I have a discussion with an iMac or an other MacBook the image received by the other person becomes fix.
To unfix it I have to put my finger on my camera and then everything is good until the next time, 4 to 10 seconds later I've got the problem again.
Perhaps somebody can help me.
My head on my screen is always good even when the bug appear on my correspondent's screen.
For information, the 2 mac have the same iOS version (OSX Lion) and Facetime version.

Hi Dave,
Edit: Well, I guess I was lost when I posted this. My answer was regarding a problem with OS X, not iOS. I'm going to leave the answer here in case someone else with a Facetime for Mac issue can benefit, because when you're searching for "Facetime AND Login", you could land in any discussion area. -Jerry
Keychain Access.app is in your Utilities folder in your Applications folder.
The path will be: Macintosh HD > Applications > Utilities > Keychain Access.app.
Keychain is where all your passwords are stored for those applications that you don't want to have to manually log into all the time.
It's a handy app to become familiar with, for instance if you want to look up a password or user name from the past.
Hope this helps you.
Jerry

Battery Problems with MacBook

I've been following the various threads about battery problems with MacBooks.
I too have experienced a problem with my battery on a 2 month old MacBook.
It suddenly refused to charge. It showed a battery icon with a black X through it.
I followed various suggestions that I found through various posts and support pages - eg. resetting PMU etc., even downloading the deep sleep widget which I found difficult to get to work - but nothing solved the problem.
Yesterday I went in to the Apple Store in Birmingham and waited until I could talk with one of the tec experts (incidentally, they were very helpful even though very busy and I didn't have an appointment). The tec guy said he though that the battery was faulty. It didn't work in another MacBook they had. But another battery would work in my MacBook. So, I was given a new battery, which seems to work fine now.
However, I have read in various posts that people have had the same new battery solution which works, but then the problem reappears with the new battery over time. I will wait and see. If that is the case, then I think it will point to the problem not being with the battery, but rather with the system, PMU, OS X, motherboard or whatever. So, I think it makes sense for us to post any difficulties we have so that Apple can see that there might be a problem with the batteries in MacBooks and start working on a solution. Otherwise, it will probably cost them a lost of money providing replacement batteries !
Intel iMac 24 inch (size matters...!) & Intel MacBook Mac OS X (10.4.8)
Intel iMac 24 inch (size matters...!) & Intel MacBook Mac OS X (10.4.8)
Intel iMac 24 inch (size matters...!) & Intel MacBook Mac OS X (10.4.8)

Hey Christopher...
I posted the same in another thread. I'm not a big fan of duplicate posts... but it seemed appropriate in this case. Take a look at the last paragraph regarding discharging lithium ion batteries. I'm not sure if it would be the electronics in the battery that tell the MacBook it's time to charge, or the MacBook's power management unit...
"Talk about a jinx! I've had my MacBook since shortly after they came out (week 9). Never had any problems. I've calibrated my battery about once a month or so. It seems after my last calibration, I got the dreaded "X" in the battery indicator. My MagSafe indicator was green. System Profiler showed that there was no battery. I reset the PMU and the SMC firmware... also tried reseating the battery (one of those things you're sure won't work... but ya just have that little bit of hope anyway). Alas, nothing would bring my battery back. Took a trip to my local Apple store. I had made an appointment online, but still had to wait over an hour (they really need to enlarge their Genius area now that they have so many more machines out there). Told the Genius what the problem was... he swapped out the battery... but the one he tried was fully charged because he took it from a machine that was plugged in. So the tension was mounting... would it charge or not (I was hoping it was just the battery and not something else). He had me use my MacBook for a bit to drain the battery. I ran Parallels and did a Windows virus scan (that should drain the battery pretty fast)... After I got the battery down to about 90%, the Genius plugged it back in. To my delight, the MagSafe indicator went orange and started to charge the battery. With that, the Genius went in the back and got me a new battery. He had me stay there for a little bit just to make sure everything was okay. I'm sort of afraid to calibrate my battery now... at least properly as in letting it completely drain. I had done a few calibrations in the past without a problem, but it seems this problem tends to occur after someone does a calibration. I'm just happy it was just the battery.
I came across this little tidbit from the Battery University webiste:
Some lithium-ion batteries fail due to excessive low discharge. If discharged below 2.5 volts per cell, the internal safety circuit opens and the battery appears dead. A charge with the original charger is no longer possible. Some battery analyzers (Cadex) feature a boost function that reactivates the protection circuit of a failed battery and enables a recharge. However, if the cell voltage has fallen below 1.5V/cell and has remained in that state for a few months, a recharge should be avoided because of safety concerns. To prevent failure, never store the battery fully discharged. Apply some charge before storage, and then charge fully before use.
I wonder if there is a fault with some of the batteries that is allowing them to discharge below this minimal level, making them impossible to recover."

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regis

zlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Problem with Speaker and Headset in Windows Vista

Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,Edwin

When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

Problem with Preview and PSD files - random gray square

Hi guys, hope you can help...
I've got a problem with Preview and PSD files.
If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
I've tried the same psd on my older iMac with leopard...and got no problem at all.
I suspect it got something to do with my Ati...
(this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
Thanks for your help.
DAve.

maybe I'm onto something...
I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
It seems like the i7 is much faster than the Ati....
Any more realistic ideas?

Problem with connecting and syncing (quicktime.qts)

Hi,
I have a problem with connecting and syncing my Iphone to itunes.
iphone alone on PC -> uploading files (fotos) is possible
itunes starts normaly, if iphone is not conected.
if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
ModVer: 7.65.17.80 Offset: 00909a47
i test different things...
- used another USB-port
- used another PC
- used macbook of my wife instead PC
- deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
- use another USB-Cable...
I'm resigned, Please help me..
Tom

AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?

Problem with yosemite and parallels

Since I have upgraded to yosemite and parallels 10 my windows 7 has been using a lot of CPU resources. Windows 7 runs very slow and it been using almost constantly 100% of one of the quads resources. This just started to happen when I upgraded, because I did not have this problem with Mavericks and Parallels 9 or 10. I have an iMac 2011, 8GB of Ram. Has anybody had this issue. Thanks.

Thanks for the response. I was searching on a parallels forum website and found the following:
As from the symptoms, the issue can lie in NVRAM preferences of your particular Mac.
Please do the following to solve:
open Terminal application on Mac (Applications/Terminal.app)
please type this command (you may copy-paste it to the terminal from this message):
sudo nvram boot-args="debug=0xd4e"
Hit Enter.
You will be prompted to enter Mac user password. Please type it and hit Enter.
Note: you won't see what you are typing, just type and hit Enter. If you don't have Mac user password, please create a temporary one.
Then you may restart your Mac and the issue should be solved.
If not - please reply me here and I'll create a ticket for you in Support.
I did the above and it seemed to correct the problem.

Problem with calendar on iMac

Problem with calendar on iMac since downloading Mavericks and attempting to connect to icloud. Upon opening calendar a window opening stating 'moving calendars to server account' which has been going for days.
please advise any possible solutions.
Thanks

Does this help?
https://discussions.apple.com/message/23531400#23531400

Potential Problems with Airplay and Mountain Lion

Hey Everyone,
I recently purchased an Apple TV, and I tried to use Airplay with our Macbook Pros. Airplay would work with all of the iOS Devices, but when it came to using with the MBP, it would either show a black screen, or a frozen image of my screen. I called AppleCare, and the rep told me it was a problem with the AppleTV, so I returned it and bought a new one, and it did the same thing. I found out that the problem was occuring because of the type of router I was using. I have a dualband router, and I set everything on one band of the router. I decided to try to place the laptops on a different band, and that's all it took. My airplay now works flawlessly.
So, if you're having a problem with airplay, and you have a dualband router, try placing your computer & iOS devices on the opposite band, and it should work perfectly.
Hope this helps.
- Kaytie Walters

The VPN log looks like:
1      13:34:36.904 09/11/12 Sev=Warning/3
CM/0xA3100027
Adapter address 10.211.55.6 has changed or not detected. Current address(es): 10.98.70.169.
2      13:34:52.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
3      13:35:07.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
4      13:35:07.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
5      13:35:08.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
6      13:35:09.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
7      13:35:10.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
8      13:35:11.861 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)
9      13:35:12.407 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)

Problems with Superdrive (with MacBook and iMac)

Similar Messages

Maybe you are looking for