Problems with Superdupe and then Winclone - please help!
Okay..
I just got a 17" and I used Superdupe to clone my 15" and used Winclone to do the same for my windows partition.
I bought a new 500 gig hard drive and formatted it. I formatted it to Mac OS Extended Journaled with just one partition.
After cloning (2 hours or so..) - I restarted with the new hard drive in the new 17" and went to bootcamp and it says...
"The startup disk cannot be partitioned or restored to a single partition. Restore your information to the disk and try using Boot Camp Assistant again."
Ok - so I went back to disk utility and did it all over again - making sure there is just one partition... now after 2 hours and super duper working again.. I am getting the same message from Boot Camp..
Any help!!! I just did this about a month ago and did not have this problem.. I think what I did last time was partition the drive in Mac and boot in windows and make the partition a windows format.. which I think worked.. but I cant remember..
Its about to drive me nutz..
thanks!
Mark
I have no idea what you are doing since you didn't make that very clear. However, what you need to do is this:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the drop down menu to One. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
I would be careful about trying to restore your clone from your other computer because the new 17" may require a new build of OS X. If you restore your other system it may not be fully compatible or not even boot the new one. Better to install the version of OS X that was included with the new computer's installer discs. You can always restore your data files separately from your backup clone.
Once you have a working system open Boot Camp Assistant and use it to create a new Windows partition to which you can restore your Wincloned backup. Note that in earlier versions of WinClone it would only restore a Windows partition to the same hardware. It may not restore to your new hardware.
Similar Messages
-
Problems with WRT160N and Xbox 360 - please help
Hello,
I have recently purchased a WRT160N router and when I play games online (Halo 3 or Modern Warfare 2) it takes around 10 min to find a game while in the lobby. I don't get kicked out or signed out of my profile it just takes a long time. It says that my NAT type is Open. I have isolated that the problem is the router because if I plug an ethernet cable from the 360 to the DSL modem I find games instantly. I have looked up port forwarding and opened the ports on the 360 and specifically for modern warfare 2 and it actually made my NAT type go to strict, ironic. I have spent 5 hours trying to mess with this and can't seem to get it working right. If someone could please help me on the settings or have any other ideas that would be greatly appreciated.
Solved!
Go to Solution.I have already tried reducing the MTU as well as the Beacon Level, Threshold, and Fragmentation. That did not work. To get the ip address of the modem is where I do cmd prompt ipconfig right. If so, I have not done that yet and since I am at work I will do that when I get home. the ports I have opened on the router for the xbox were 80, 88, 53, and 3074. Like I said when I did that it actually got worse cause my NAT was open but then it went to Strict.
-
Real Problems with Feedburner and iTunes. Please help!
I've tried numerous things to figure out whats going on but havent been able to pin point it. Maybe someone here can help. My latest podcast episode has not shown up in iTunes yet and it has been almost 2 days. I've tried pinging the iTS and pinging feedburner but I'm not sure what's going on. For my first 2 podcasts everything went fine but for this one, the feedburners site says it was unable to create an enclosure for the podcast. Any clues on where to even start? I'm not really a code guy so I don't know what to do. Here's my feed URL and the site I post my podcasts too:
http://moviepool.wordpress.com/feed/
http://moviepool.wordpress.com
feedburner feed:
http://feeds.feedburner.com/moviepoolinteresting. I see they are in the iTunes Store now. Last night after I pinged iTunes AND feedburner it didn't show up. What is the usual wait time for pinging the sites? Maybe I need to just be a little more patient
All I care about are the actual mp3 episodes of my podcasts. I don't care about the other links or image files.
Bones -
Problems with bxslider and fancybox. Please help!
Hi guys,
I'm making a site for a client and have made a gallery using FancyBox. Everything worked fine until I implemented bxSlider into the gallery.
The two are conflicting - although it seems that bxSlider has the upper hand as that still works (albeit out of position at the moment!)! The images using FancyBox just load the link to the image as if FancyBox wasn't installed...
If you click here, you can hopefully see what I mean.
Does anyone have any ideas on how I can get both to work?
Thank you,
SMI didn't see it the first time, you still have 3 versions of jquery. 1.7.1, 1.7.2 and jquery-latest.js (v1.8.1).
The best way to get all of these scripts to function on the same page, would be to start with scripts written for the same version of jquery. I know 1.8.x had some issues (from a post by Nancy O.) and older scripts stopped working. It might be best to use 1.7.2 now that I think of it.
You might be able to use 1.7.2 in place of the first jquery reference and clear out the other two references. If that doesn't work, you're going to need to find or re-write compatible scripts. -
hi apple it's kian ! i have mac book air with 10.7.2 version may keyboard light does'nt work with f5 and f6 ! please help me !
Hello Kian,
This may sound silly but if you put your hand over the isight camera, do the lights change on the keyboard?
Ryan -
Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help
Hi there Clairemcaula,
You may find the troubleshooting steps in the article below helpful.
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/ts4036
-Griff W. -
Problem with Isight or Photo Booth PLEASE HELP
When ever i take a picture with teapot or spotlights or an other dark picture for the matter It comes out all white and pink kind of. It just looks weird and discollored but only pink and white. Please help me ( ps its only the new ichat effects it has problems with and idk how to delete them their the ones on this website from Ismiley)
Camille2345678 wrote:
http://www.apple.com/downloads/macosx/email_chat/moreichateffects.html
the link above is where i downloaded the effects but im not sure how to uninstall them and it doesnt say on the website. When go find it in Finder it says More Ichat Effects Uninstaller and i pressed it but it brings up like Terminal ( i think its some application) and i dont know where to go from there and most of the other effects work but the dark ones dont. Also i tried turning flash off and it doesnt help.
http://i45.tinypic.com/28twfns.jpg
According to the developer's website:
http://ismileys.free.fr/moreichateffects/support/
".... you can launch iChat and Photobooth in 32 bits only..."
If that does not help you, try uninstalling MoreIchatEffects. I do not use MoreIchatEffects, but, again, according to the developer's website,
http://ismileys.free.fr/moreichateffects/
"If you want to remove all effects, run the installer or remove files in /Library/Compositions"
(1) In addition to the extra effects, it appears that the MoreIchatEffects installer adds an uninstaller application that you say looks like Terminal. You should be able to run the MoreIchatEffects Uninstaller application by merely double-clicking its iCon and following any on-screen instructions.
If you need more help with how to run the Uninstaller than you can find from MoreIchatEffects> Help, you can contact the developer for assistance using the information from this page:
http://ismileys.free.fr/contact.html
Based on the "... check the number of your effects. If it isn't a multiple of 8, it will crash always." comment on that page, you may also want to count the number of effects in your Mac's Library/Compositions folder to be sure that is not your problem. If you need help finding the effects files you are to count, see the next paragraph of this post.
(2) If you cannot make the uninstaller work, note that the "Library/Compositions folder" that contains the effects files you can manually delete is the one in your Mac's startup drive Library/Preferences folder. Look in the "Compositions" folder there.
Do NOT remove any files from either the Library folder in your Mac's System folder
or from the Library folder in your ~ (Home) folder.
(3) If you cannot make either method above work for you, you can use your Time Machine backup from a date prior to the time you installed MoreIchatEffects. For help, see:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15638.html
(4) If all else fails, your Apple-Authorized Service Provider can help.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
Please help. I have a new computer and an ipod nano 7th generation. I am having problems getting my music from Itunes library to my ipod. How do you do it?
Hello Sandy
You can transfer the purchases from your iPhone to your new computer by following the steps in following article.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
If you have music that was not purchased from the iTunes Store, then you will not be able to move it from the iPhone to your computer. Instead you will need to follow the steps in this article that helps with moving the library from the old to the new.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I have a problem with my win 8 system please help
hi.
yesterday I got the msi gt70 I ordered in the mail everything is working good accept one thing.
whenever I try to install an app (no matter what kind, I tried solitaire and Skype) the app is going up and immediately shuts down nothing happens.
I tried to look it up on the web and did everything it says but nothing helped.
please help me I want thing to work properly.
ty for your attention.I have the exact same problem in my GT70-0ND-447 with Windows 8 SL x64.
Skype, Ebay and some other Metro style applications does not work.
When I start the application startup screen appears, and then almost immediately closes.
Applications can be seen in the drop down list on the left, but they do not work. In the system log I see a message "The server not register with App DCOM within the required timeout" (error 10010).
Event for Ebay under Microsoft-Windows-TWinUI/Operational: "Activation of the app eBayInc.eBay_1618n3s9xq8tw!App for the Windows.Launch contract failed with error: The app didn't start." (error 5961).
I wrote to support. Waiting...
Please help! -
Got a problem with my Chatting-Room program, please help me if you can.
There is one bug in the code (should be just one), but I couldn't find it, I even recoded the whole thing, after I recoded the code, the same problem seems still there. I just can't find where the problem is. So I hope someone here can help me, thank you very much.
First, I made a Server and a Client. Server has 5 classes, and Client has 2 classes. My intention is that all the clients(running on other computers) will connect to the server (which is my laptop), and then they can communicate with each other. For example, if person A typed "Hello", person B and person C's computers will receive this message and display it.
The problem is that several clients can connect to the server (My laptop), but if one person type something, other people won't receive the message, it's blank on their screens. Maybe there is a problem when server receiving the message. So this is the problem I want to solve.
I have the code down there, here is a brife description what each class mainly does.
First class of Server is for connecting client, this class is named Server. Everytime a client is connected, the Server class calls the second class to store the client's information (which is its IP address), the second class is named People.
Third class is named Receiver, it is for receiving the massage from any one of the clients, then stores the message to a static field variable in Fourth class, fourth class is named Saying.
Fifth class of Server is named Sender, it is for sending the massage to the client, that message is the one that stored in Saying.
The First class of client is named Client, it prints any message that the server send to it.
The Second class of client is named SendFromClient, it wait for user to type something, and then send the message to the server, so server's Receiver class hopefully will get it and store it to the field variable in the Saying class.
Here is all the codes:
Server Class:
import java.net.*;
import java.io.*;
import java.util.*;
public class Server
public static void main(String[] args)
/*port number*/
final int port = 41333;
/*welcome messages:*/
System.out.println("This is FriendlyJ 1.0 running");
System.out.println("Listening on ports 41333");
try
/*Clear the ArrayList*/
People clear = new People();
clear.IPs.clear();
/*Create a server socket that will accept any connection on this port*/
ServerSocket ss = new ServerSocket(port);
/*keep getting clients*/
while(true)
/*connect with one client at a time*/
Socket s = ss.accept();
PrintWriter out = new PrintWriter(s.getOutputStream(),true);
Scanner in = new Scanner(s.getInputStream());
/*indicate one establish of connection*/
System.out.println("One connection estabolished!");
/*two classes, one foe receiving, one for sending*/
Receiver receive = new Receiver(in);
Thread ty = new Thread(receive);
Sender send = new Sender(out, s);
Thread yt = new Thread(send);
ty.start();
yt.start();
/*add IP to ArrayList*/
clear.storing(s.getInetAddress().toString());
out.println("There are " + clear.IPs.size() + " people online;");
System.out.println("Connected to " + s.getInetAddress().toString());
catch (Exception e)
System.out.println("System exception");
}People Class:
import java.util.*;
public class People
ArrayList<String> IPs = new ArrayList<String>();
/*A method for storing IPs*/
public void storing(String IP)
IPs.add(IP);
}Receiver Class:
import java.util.*;
public class Receiver implements Runnable
final private Scanner in;
/*Constructor to get the scanner*/
public Receiver(Scanner abc)
in = abc;
public void run()
Saying say = new Saying();
try
while(true)
/*waiting for input from client, then give it to Saying*/
say.setSaying(in.nextLine());
catch (Exception e)
e.printStackTrace();
}Saying Class:
public class Saying
static String saying = "";
public void setSaying(String a)
saying = a;
public String getSaying()
return saying;
public void resetSaying()
saying = "";
public int getlength()
return saying.length();
}Sender Class:
import java.io.*;
import java.net.*;
public class Sender implements Runnable
final private PrintWriter out;
final private Socket s;
public Sender(PrintWriter abcd, Socket abcde)
out = abcd;
s = abcde;
public void run()
out.println("Feel free to chat.");
int count;
Saying says = new Saying();
try
while(!s.isClosed())
count = says.getlength();
if(count>0)
out.println(says.getSaying());
says.resetSaying();
/*disconnect with the client*/
s.close();
System.out.println("Connection with " + s.getInetAddress().toString() + " is closed.");
catch (IOException e)
System.out.println("Network error!");
}Client Class:
import java.util.*;
import java.net.*;
import java.io.*;
public class Client
public static void main(String[] args)
Socket sc;
System.out.println("Welcome to FriendlyJ IM program");
System.out.println("Connecting to the server...");
int port = 41333;
/*A variable for storing IP address of Server*/
InetAddress ip;
try
ip = InetAddress.getByName("192.168.1.68");
sc = new Socket(ip, port);
System.out.println("Connected with Server");
Scanner in = new Scanner(sc.getInputStream());
PrintWriter out = new PrintWriter(sc.getOutputStream());
/*a thread for sending message to the server*/
sendFromClient sendin = new sendFromClient(out);
Thread sending = new Thread(sendin);
sending.start();
/*display welcome message*/
System.out.println(in.nextLine());
/*displaying how many people are online now*/
System.out.println(in.nextLine());
while(true)
/*print out the message sent by the server*/
System.out.println(in.nextLine());
catch(UnknownHostException e)
System.out.println("Couldn't find the host!");
catch(IOException e)
System.out.println("Network error!");
catch (Exception e)
e.printStackTrace();
}SendFromClient Class:
import java.io.*;
import java.util.*;
public class sendFromClient implements Runnable
private PrintWriter send;
public sendFromClient(PrintWriter sendto)
send = sendto;
public void run()
Scanner sc = new Scanner(System.in);
while(true)
/*get a message, then send to the server*/
send.println(sc.nextLine());
That's all, thank you for helping!
Edited by: stdioJ on Oct 31, 2007 3:58 PMHi pgeuens ,
I tried it ...but it didn't work for me.
I changed my .jsp like this
<%@ page language="java" %>
<%@ taglib uri="/tags/struts-html" prefix="html"%>
<html:form action="Registration.do">
UserName:<html:text property="username"/><br>
enter password:<htnl:password property="password1"/><br>
re-enter password:<html:password property="password2"/><br>
<html:submit value="Register"/>
</html:form>And i changed that web.xml like..
<taglib>
<taglib-uri>/tags/struts-html</taglib-uri>
<taglib-location>/WEB-INF/struts-html.tld</taglib-location>
</taglib>Now I am getting an error like ......."File "/WEB-INF/struts-html.tld"not found.
Hi Ashish
I didn't find struts-form.tld in WEB-INF folder.But all the remaining file all there.
Again I downloaded that struts1.2.9 ...in that also i couldn't find struts-form.tld file(except this remaining are there).
Please tell me, if there any other ways....
Thanks,
kona. -
Problems with Servlet to JSP communication please help!!!
Hello All ,
we have different web applications running
e.g.
We have 2 webApp named A and B are running and there URL are
http://localhost:8080/A and
http://localhost:8080/B
and we have one common WebApp running at
http://localhost:8080/common
Our problem is that whenever a user log in to the system he/she will first call the
common URL and then enter his user name and password
and depending on his username we have redirect user to either A or B with his pasword and username as parameter to the request.
i.e. in common module whenever i get userName and password we call a Servlet to authenticate the user and to detemine which webapp to forward to..
i have to call jsp accordingly from servlet in common webApp to JSP in different webapp.
I m wonderning how it is possilble.
As
i don't know how to call another webApp using
RequestDispatcher.forward () method and
also
i am not able to set paramters with the request whenever i user response.sendRedirect() method
I am wondering what could be the way to pass paramer to the request from servlet in one webApp to JSP in another webApp
Please help its urgent!!!
thankx in advanceforward() can't call another webapp.
There are several ways you could do this.
1) Share the session object across both webapps and set something as an attribute of the session.
2) Use a database or file storage to record the transaction, then go to the second webapp, which picks up that info. -
Remote Sharing Problems with my MacBook Pro. Please help...:)
Hi all. Could really use some advice from any network pros out there.
I'll be as detailed as possible.
I am about to travel overseas for a month and wanted to setup remote access to my old G5 Dual 2.5 tower in my studio.
I found that the new OS, phones etc. have the remote management and screen sharing options so I thought I would set it up.
The first day I did it, it all worked properly and I, and my friends could all log in no problem from our phones via VNC, or computers using the 'Connect To Server' option as well as Chicken of the VNC.
I also set up my friends computer across town to do the same.
So, the next day I was fiddling with my wireless that happens to drop out every once in a while, thinking its a phone or printer interfering, but anyways, when I restarted the network, the local IP of the server computer had changed, so no problem, I went back through all of my settings and changed the IP, but then it wouldn't connect anymore. AFter 4 hours of fiddling, restarting, changing the port-forwarding etc. in the routers, I finally got it working...
Then this morning, I couldn't get it to work, and none of the IP's have changed....
Now I'm confused as it seemed to be setup fine.
My setup is as follows.
DSL modem, I have the external IP 76.166......etc.
This DSL modem connects via ethernet to a Linksys BEFSR41 Router, which then connects via ethernet to an older Airport Extreme Base Station and also a newer Airport Express.
The G5 I am running as a server is connected via Ethernet to another Airport Express in my studio which is setup to be a wireless 'remote' on a WDS network where the older Extreme Base Station is the 'main'.
Current local IPs are standard.
Base Station is 10.0.1.1
'Remote' Airport Express is 10.0.1.5
G5 'server' computer is 10.0.1.2
Linksys router is 192.168.1.1
I have logged into the Linksys router, gone to the Applications & Gaming/Port Range Forwarding section and enabled a port on 5900, both TCP and UDP, to go to the IP 192.168.1.102.
I have gone into the Airport Utility of the base station, clicked Advanced, and added the port forwarding of 5900 to local IP 10.0.1.2.
The remote management section on the Server G5 is on, with vnc password etc. all users.
When I try and access this computer using the 10.0.1.2 IP on the local network, it works fine, but when I try the external IP, I get the 'connection failed' error.
Am I missing something....?
And sorry for the long email but if you are going to help, I know you'd want all the info.
Oh, and I have repaired permissions although not sure if that helps any.
Thanks in advance for any help.
WizWhat sort of videos? What are you trying to do?
We can't advise anything that violates breaking copy protection schemes or violating copyrighted material on this forum.
If your sure your not violating, then there is SnapZProX that will record anything playing on the screen into Quicktime file with sound, and there is Firefox browser with various add-ons for downloading Flash/YouTube videos and there is Transmission to download p2p files. However with that last one you really have to be extra careful the content is not a stolen copy or malware as you can be sued and/or have your machine compromised.
For safe downloading of videos, you should take a look at Netflix, for $8 a month and installing Silverlight (they will provide it) you can stream tons of videos to your browser for viewing (not copying) and see the videos again if you wish so it isn't necessary to copy them and clog up your drives with large files.
Movie videos are usually watch once and never watch again, so it's really unnecessary to store them (especially illegal copies) and clog up your machine or be paranoid having the content and possibly being sued over it.
There is also iTunes that allows rentals, but it's not as inexpensive as Netflix $8 all you can eat monthly, but it has newer titles. -
Problems with Oracle XE on XP - Please help!
Hi,
I have oracle XE installed on my machine and it was working absolutely fine for the last year or so. Today there was an trojan intrusion which caused some issues with my windows xp OS like hiding some files, desktop etc. After everything was cleaned up and things back to normal. I am having issues with XE.
I can start and stop XE with out any issues and When I use the run sql command line, I can connect using - connect sys/sys as sydba and I can also run a query to see all the users and see the HR user also.
However, 1. When I connect to my hr user using connect hr/password@xe, it just hangs
2. I tried the- go to Oracle XE admin page but it just hangs for a long time and returns page cannot be found.
3. I can tnsping the xe instance.
Not sure what the issue is? I am not a DBA and don't have much knowledge on this. Is a fresh install the only option? or is there any way to correct this using the sys/sys user?
I have pasted the listenor.log and listenor.ora details below. I tried a fresh install after removing XE. but the same issue!
Please help!
Thanks,
Nikita
Here is the output of listner.log
30-APR-2012 13:18:19 * service_update * xe * 0
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:18:19 * service_update * xe * 0
30-APR-2012 13:18:22 * service_update * xe * 0
30-APR-2012 13:18:25 * service_update * xe * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:18:27 * service_died * xe * 12537
30-APR-2012 13:18:30 * service_register * xe * 0
30-APR-2012 13:18:30 * service_update * xe * 0
30-APR-2012 13:18:36 * service_update * xe * 0
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:18:39 * service_update * xe * 0
30-APR-2012 13:18:42 * service_update * xe * 0
30-APR-2012 13:18:48 * service_update * xe * 0
30-APR-2012 13:18:55 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1708)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
30-APR-2012 13:19:39 * service_update * xe * 0
30-APR-2012 13:19:42 * service_update * xe * 0
30-APR-2012 13:25:03 * service_update * xe * 0
30-APR-2012 13:25:05 * service_update * xe * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:25:07 * service_died * xe * 12537
30-APR-2012 13:26:14 * service_register * xe * 0
30-APR-2012 13:26:15 * service_update * xe * 0
30-APR-2012 13:26:20 * service_update * xe * 0
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:26:23 * service_update * xe * 0
30-APR-2012 13:26:26 * service_update * xe * 0
30-APR-2012 13:26:29 * service_update * xe * 0
30-APR-2012 13:26:32 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1992)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
30-APR-2012 13:26:38 * service_update * xe * 0
Trace information written to C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
30-APR-2012 13:28:43 * trace * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=1521)))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Listener completed notification to CRS on stop
30-APR-2012 13:31:01 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=nikita))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * stop * 0
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 30-APR-2012 13:31:06
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Log messages written to C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Trace information written to C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
Trace level is currently 0
Started with pid=5236
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
30-APR-2012 13:31:07 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=nikita))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:32:03 * service_register * xe * 0
30-APR-2012 13:32:32 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=2040)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
30-APR-2012 13:35:00 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=nikita))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
30-APR-2012 13:42:03 * service_update * xe * 0
and here is the contects of listenor.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = nikita-lap)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
-------------------------------------------------------------------------------------------------------------------------------------------------------Hi Clcarter,
Apologies, Did not get notifications for this. Just logged in to check on the status and saw your updates. Looks like an issue with the host.Here is the output of the commands
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6200
AGN
Physical Address. . . . . . . . . : 00-27-10-D2-D3-4C
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 191.167.1.7
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 191.167.1.1
DHCP Server . . . . . . . . . . . : 191.167.1.1
DNS Servers . . . . . . . . . . . : 191.167.1.1
Lease Obtained. . . . . . . . . . : Sunday, May 06, 2012 1:14:20 PM
Lease Expires . . . . . . . . . . : Sunday, May 06, 2012 2:14:20 PM
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) 82577LM Gigabit Network Con
nection
Physical Address. . . . . . . . . : 5C-26-0A-16-0E-BE
C:\Documents and Settings\nikita>netstat -an |findstr LISTEN
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1521 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1860 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1861 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1863 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2030 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2301 0.0.0.0:0 LISTENING
TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING
TCP 0.0.0.0:8180 0.0.0.0:0 LISTENING
TCP 127.0.0.1:1798 0.0.0.0:0 LISTENING
TCP 127.0.0.1:5152 0.0.0.0:0 LISTENING
TCP 127.0.0.1:5354 0.0.0.0:0 LISTENING
TCP 127.0.0.1:8080 0.0.0.0:0 LISTENING
TCP 127.0.0.1:27015 0.0.0.0:0 LISTENING
TCP 127.0.0.1:62514 0.0.0.0:0 LISTENING
TCP 127.0.0.1:62522 0.0.0.0:0 LISTENING
TCP 191.167.1.2:80 0.0.0.0:0 LISTENING
TCP 191.167.1.7:139 0.0.0.0:0 LISTENING
C:\Documents and Settings\nikita>nslookup 191.167.1.7
DNS request timed out.
timeout was 2 seconds.
*** Can't find server name for address 191.167.1.1: Timed out
*** Default servers are not available
Server: UnKnown
Address: 191.167.1.1
DNS request timed out.
timeout was 2 seconds.
*** Request to UnKnown timed-out
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 30-APR-2012 15:52:42
Uptime 5 days 21 hr. 47 min. 39 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=
HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 3 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 4 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 4 handler(s) for this service...
The command completed successfully
The nslookup throws a DNS error. could that be the problem?
Thanks,
Nikita -
Problem with Variable!!! Please Help
Hello People!
I have a big problem!!
I have a procedure executed by a program in Pro * C/C++
In this program there is a variable:
char CBATCH[8];
MEMSET (CBATCH, NULL, 8);
This variable is a parameter for my procedure!
create or replace procedure COMPOSER (vnum_composer out number,
vbatch_id in varchar2)
as
begin
select count(batch_id) into vnum_composer
from trl_batch_composer
where batch_id = vbatch_id
and send = 0;
end;
The problem is, vnum_composer is always NULL.
I think thats because in my table, Batch_id is a CHAR(7).
So it cant compare batch_id = vbatch_id....
please help...You mean the sequence you have in Query Properties - Variable Sequence dont match with the Runtime Selection Window?
I remember having a similar problem last week but cud resolve it after redoing it .
I am guessing ur on BI 7.0 SP 13...
Message was edited by:
Jr Roberto -
Serious Problem with New Mac Pro! Please help!!
Ok, long story short.
My Mac pro keeps crashing after I installed the latest 05-2007 security update. It seems to crash everytime I come back to the computer after the screensaver has been on for a while (its not the screensaver though) I reinstalled the newer v1.1 version of the update and I thought the problem had gone, but it hasnt as the computer just crashed again.
I cannot see any correlation to any other programs, and im 99% sure its not a hardware issue. It does not seem to relate to parallels, or the screensaver, or itunes, or anything!
And there is another crazy thing, when the computer restarts, it says that it recovered from a serious error and asks you to sumit a report, so i click the send report button and do you see a normal report window with all the code ? NO!!! Press report and the initial window just DISAPPEARS, nothing else happens!!! i.e it wont send the but to apple!! no wonder they haven't fixed it!!!
The history of the panic log is always the same error:
Tue Jun 5 19:29:24 2007
panic(cpu 3 caller 0x003BDEB0): OSObject::refcount: Attempting to retain a freed object
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x4c543bb8 : 0x128d08 (0x3cb134 0x4c543bdc 0x131de5 0x0)
0x4c543bf8 : 0x3bdeb0 (0x3f0f94 0x3f0f70 0x160f5ba4 0xad319c0)
0x4c543c18 : 0x3c0d3b (0x160f5ba0 0x4ae958 0x28 0x3c09c4)
0x4c543c48 : 0x3c0e94 (0x13c58c40 0xad319c0 0x0 0x3c10ef)
0x4c543c68 : 0x3c188a (0xad319c0 0x0 0x0 0x0)
0x4c543ca8 : 0x3c18f7 (0xad319c0 0x13c3a100 0x13c36b00 0x1628d8)
0x4c543ce8 : 0x38663c (0xad14840 0x0 0x4c543d28 0x3c1002)
0x4c543d08 : 0x389e5b (0xad02080 0xff7da80 0x0 0xad02080)
0x4c543d28 : 0x3b1448 (0xad02080 0xff7da80 0x4c543d58 0x3bdfd9)
0x4c543d78 : 0x188511 (0xad02080 0x14da63b4 0x14da63c8 0x11cc32)
0x4c543db8 : 0x12b4c3 (0x14df20b4 0x14da6398 0x0 0x0)
0x4c543df8 : 0x124b17 (0x14df2000 0x0 0x18 0x4c543edc)
0x4c543f08 : 0x195a42 (0x4c543f44 0x0 0x0 0x0)
0x4c543fc8 : 0x19b21e (0xb101f20 0x0 0x19e0b5 0xb101f20) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb011e508
Kernel version:
Darwin Kernel Version 8.9.2: Thu Feb 22 18:08:23 PST 2007; root:xnu-792.19.2~1/RELEASE_I386
Please help someone!Did you read the thread on Security Update 2007-005?
Frozen Mac Pro
Maybe you are looking for
-
SSIS SharePointListAdapter fails while exporting a SharePoint List from SharePoint 2007
Greetings, I'm trying to export List from SharePoint 2007 into SQL Server table, using SSIS SharePointListSource component (installed from https://sqlsrvintegrationsrv.codeplex.com/releases/view/17652) But in component editor I'm getting this error
-
How can I restore the functionality of the Bookmarks shortcut. I DO NOT LIKE internet explorer, it is cumbersome and slow. How can I modify the bookmarks shortcut to act like a menu again? I do not like the bookmarks and history pop-out... Firefox wa
-
My iMessage is not holding checked my phone number box in preferences
I was using imessage perfectly. But I had to change my apple ID password and now, everytime I login in my macbook, imessage is not working, because there is no box checked, nor email address, nor my iPhone number, the one that I used to use. Now, if
-
Interactive-adobe form Converting into PDF without print dialog
Hi Friends, I would like to convert Interactive - adobe form into PDF without print dialog.which adobe form interface type is Smart Forms-compatible Interface.I have tried for solution.but I could not succeeded.How can resolve the issue.please help m
-
Now I am using the check lot 5011 which is in sequence but now i created a new check lot 5012 which is also in sequence and i mentioned nxt check lot as 5012 in 5011, i left one check in check lot 5011 and i updated checks manually from check lot 50