Problems with swiping, highlighting text, not working properly

Hello and new to forum as well as new to BB10. I have the Q10 model and really like it alot. However, these swiping techniques or gestures have me puzzled. Sometimes they work, and most times I find myself swiping the hell out of the screeen out of aggravation. Is there any way this can be tested as to working properly since it is a touch activated control?
I really find myself swiping three times, 5 times or more, just to get to the hub. I cannot close out a screen with one swipe. It will not copy test without repeated taps. The circle pointer is hard to get on. I realize my swiping is a new technique to me, but could it be the protective cover that was put on it? Can anyone help me try to fix this very annoying problem as I am not used to repeated attempts at trying to do something so simple as closing a program or moving to another location tab. I sure would appreciate it.
Thanks in advance.

Hello greg30
Welcome to the BlackBerry Support Community Forums.
Sorry to hear you are having issues with your BlackBerry Q10 smartphone navigational gestures. Please view the follow link as it takes you to a "BlackBerry Q10 Gestures Overview".
The screen protector is some cases can effect the gesture input on the BlackBerry Q10 smartphone screen. This is simply due to the increased thickness of the scratch resistant liner on the touch screen.
Goose947
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Similar Messages

Just moved my email from entourage to Mail. Having real problems with getting my signatures to work properly. When adding in a small company logo, windows computers only receive signature as an attachment. Am sending email as Rich Text. Any ideas on a fix

Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.

Send it as html so the signature is an image source URL

Has anyone had a problem with the spotlight search not working sometimes?

Has anyone had a problem with their "spotlight search" not working? If I restart the phone it will work for a few days then not work again.

It's more likely the OP's router. I have a wifi only iPad 2, yet location services work just fine on my iPad. If I open maps, my location is found quite nicely. I have seen that some routers do not provide location services and I suspect the OP has such a router.

I am having real problems with my hotmail account not working on my iMac

I am having real problems with my hotmail account not working on my IMac but works absolutely fine on my Iphone 5. Can anyone help with the setup for iMac. I am with BT for my Broadband. I am cionverned if I route my Hotmail accoutn to GMail will iy stop working on my Ipone.

How are you accessing Hotmail? Via your web browser? Are you using Apple Mail? Outlook?
The answer will be different depending on how you want to access Hotmail.
If you are using an email client (like Apple Mail, Outlook, Entourage, etc.)) then you need to set up a mail account in your email software.
The incoming Hotmail settings are these:
Incoming server: pop3.live.com
User name: Your full Hotmail email address (aka "me @ hotmail.com" or "me @ live.com")
Password: Your Hotmail password
POP port: 995
Use SSL to connect : yes
The outgoing Hotmail settings are:
Outgoing server: smtp.live.com
User name: Your full Hotmail email address
Password: Your Hotmail password
SMTP port: 587 (override the default port if necesssary)
Use SSL to connect : yes

OBIEE 11G report download with excel 2000 is not working properly

Hi all,
The Analytics report download is not working properly in excel 2000.
This version is no longer supported?
Is any way to workaround this problem?
Cheers
Carlos Pereira

Hi,
which version r u using? until obiee11.1.1.5 its bug but solve it by workaround method . also the bug fixed in obiee.11.1.1.6
11700314 REPORT NOT EXPORTED FULLY INTO EXCEL WHEN DOWNLOADING FROM PAGES OTHER THAN 1
1) stop it all u r bi serivices then take a back of u original instanconfig.xml file then do the below changes
D:\Oracle\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1
instanceconfig.xml
just add below content then
<Views>
<Pivot>
<MaxCells>6500000</MaxCells>
<MaxVisibleColumns>100</MaxVisibleColumns>
<MaxVisiblePages>1000</MaxVisiblePages>
<MaxVisibleRows>65000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>500</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>64000</DefaultRowsDisplayedInDownload>
<DisableAutoPreview>false</DisableAutoPreview>
</Pivot>
<Table>
<MaxCells>6500000</MaxCells>
<MaxVisiblePages>1000</MaxVisiblePages>
<MaxVisibleRows>65000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>500</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>64000</DefaultRowsDisplayedInDownload>
</Table>
</Views>
Restart all u r bi services..
then test it out.
Thanks
Deva

IDVD 08 - problem with scene selection tabs not working after "burn"

I have a movie that is about an hour long (made in iMovie08 using mostly still photos). I wanted to have "chapters" -- but with that option gone, I used the Scene Selection option in iDVD08. This created menus with 15 scene selection buttons (I chose every 4 minutes). The menus were automatically created by iDVD and I did nothing to change them, except to type in scene info (two-three words).
The buttons all worked fine on the computer, and I burned a DVD. The DVD worked great in my VCR player. I'd select Play Movie and it would go. I'd select Scene Selection and I'd get the menus for that. But when I'd highlight one of the scene selections and "enter" (select) -- it wouldn't go to that scene. I could go back and forth between menus, and could move around and highlight the scene buttons, but selecting would not start the scene to play. The movie played fine from start to finish, and the other remote features worked (stop, pause, menu, etc.).
I went back to iDVD and chose a different theme (thinking maybe I'd inadvertently done something to mess things up. The only thing I did differently in addition to the new theme, was to add two small movie clips - and I rearranged the buttons on the menu (dragging) to get them positioned where I wanted them. So my first menu says "Play Movie". The second menu has: Play Movie, Scene Selections, Little Movie 1, Little Movie 2. Everything worked greated in iDVD. Then I created a disk image to view using DVD Player (rather than waste another DVD). Same problem -- only worse. This time I couldn't even highlight Scene Selection to get to the scenes' menus.
Any thoughts on why I'm not able to get the "Scene Selection" buttons to work after a burn? Am I missing a step somewhere in iDVD?
Thanks.

I am not sure, but does your post concerning the problem, that all Remote Control function will work properly within iDVD'08 but after burning the DVD absolutely not with the RC of your set top DVD player connected to your TV?
If this is it:
Meanwhile I could figure out - after many nights of not been very productive and only working out on all the iDVD'08 problems - that **ALL** of the *7.0 Themes* have a major problem in generally.
The following points are concerning iDVD'08 using any of the 7.0 Themes:
- Complete deep freeze of your Mac under Leopard when rendering/coding/burning a movie which has chapters and you use movies instead of still images in drop zones. (LeopardiDVD087.0Themes)
- Functions on remote control of your set top DVD player are not working correctly when making a movie with chapters. This is generally on Tiger and Leopard the same problem using iDVD08 with any of the 7.0 Themes.
Quick and dirty workaround:
You may avoid this if you simply use a 6.0 Theme or lower version of the Themes.
But this is of course not the clue...
It is VERY DISAPPOINTING, having software at such a low quality level deliverd by Apple. And somehow it looks like they DO NOTHING against it. No statement, no excuse, they really remain silent.
This may also be a thread you could be interested in:
http://discussions.apple.com/thread.jspa?threadID=1203323
Cheers,
Roland

Highlight text not working in multi-thread client-server application plug-in

I'm developing a plugin application for my dissertation research on multi-application environment. I have an application server that communicate with the PDF document via plugin.
The plugin acts as both client and server, depending on the situation.
- Plugin as Server
I have a multi-threaded winsock2 IOCP running to catch client connections and when a client connected, get the data from the client (set of words), and highlight these words in the pdf document.
- Plugin as client
I use 2 procedures, one to collect all the text from PDF and send to the server using tcp win-socket connection and another to collect data from highlight tool and send these text. both these are not threaded.
Here's my question, because I want to listen to multiple client connections, when the plugin is the server, I'm running this procedure in a thread and then wait for clients to connect and use IOCP to serve the client connections. When the client is connected I use the data coming from client to highlight some text in the PDF document. All of these functionalities are already implemented, but when I receive data from client and try to highlight text in the PDF document my application freezes up and stop working. I think this is something to do with the thread. I'm using _beginthreadex to start the server and then another _beginthreadex inside the IOCP worker thread.
I can post the code, but before that let me know if you can see any problem in this situation. What I see from other posts is that acrobat is not multi-threaded.

Thanks a lot for the reply.
I guess I probably need some sort of a notification when the data is received and do a callback to the main thread to run the acrobat API. Is there anyway I can create custom notifications? Something like this,
AVAppRegisterNotification(AVDocDidOpenNSEL, gExtensionID, ASCallbackCreateNotification( AVDocDidOpen, (void *)DocIsOpenedCallback), NULL);
or should I use a custom action listener?

Problem with 23 inch, basically not working...need advice

Hi, I have had the 23 inch for a couple of months and one day, it stopped working as usual. For the most part, when you turn the computer on, the monitor will 50 % of the time turn on, 50 % not. If it does turn, as soon as the computer turns the monitor to sleep, it will 10 % of the time turn on, 80 % not turn on again at all until the computer is turned off (and sometimes this does not help and all you can do is try the next day), and 10 % flicker and image of the screen. I have deleted the plist files, created new profiles, tried other macs, reset logic board and video ram with no help. The only way to get the monitor to turn back on (and this does not work all the time) is to unplug the monitor from the power block and plug it back in. You will have to do this several times for it to work, and then the monitor will work fine until either the monitor goes to sleep or the Mac. I have taken the monitor to the Apple store and it turned on for them so they told me to get lost. It looks like this is going to be something I need to figure out first or wait until it never turns on again...which should be soon at the rate it quits. Any advice or no what is wrong so atleast I can tell them at the Apple store (after I make the 400 mile trip there)? I originally thought it was the power supply but after trying another one at the store, mine worked too. Its not the power mac because I tried it on my powerbook and it doesnt work either. By the way, this all started once I plugged it into my powerbook for the first time. Its getting irritating trying to turn it back on when I am doing work... Please help!

Probably, the dropping caused a serious problem on the hard drive of your iPod. See doing the following helps ..
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”

ADOBE BRIDGE SAYS HAVE PROBLEM WITH CACHE. WILL NOT WORK AND I TRIED TO GO TO

DownLoaded yetserday 2200 new pictures into my mac book por.
now adobe bridge freezes up and says error in cache settings.
but when i attempt to open preferences, and clear out cache, it does not work.@

hnz5758 wrote:
i attempt to open preferences, and clear out cache, it does not work.@
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Problems with lost bookmarks, keypad not working, apps shutting down

Out of the blue, while I was still using Safari, all my bookmarks disappeared. No matter how many times I tried to add a bookmark it doesn't show up on my Bookmarks tab. I've tried adding a new folder on my bookmarks tab but it doesn't work either. I don't know what's going on. I've already reset my iPhone once because there were so many problems after I downloaded iOS4.
Also, I don't recall seeing "History" under the Bookmark tab but now it's there. The History option (along with the websites, etc.) comes and goes. Even after I delete everything from the Settings app, the history still shows up afterwards.
Any help or suggestions would be appreciated. If I absolutely need to (again), I'll reset my iPhone. I honestly didn't think I was going to have this many problems with iOS4. Everything was perfect before I downloaded the new operating system. I'm also experiencing other problems with iOS4 such as the keypad not working during a phone call and apps shutting down multiple times. Again, any help or suggestions would be great.

it just sorta started working again

Problem with various programs freezing/not working

I'm not sure if it's a problem with the computer itself or with the software, but perhaps someone on here can help me.
For about a week now I've been having problems with various programs on my iMac. These programs include iTunes, Force Quit, Shut Down, Safari, Finder, and certain functions on the keyboard.
The problems I've been having revolve around the programs freezing up when you either first try to operate them or after opening the programs and trying to click on things within the program itself.
A good example: I haven't been able to use iTunes past the point of opening it up. Once I try to play a song, it freezes up and the rainbow wheel comes up and just keeps on spinning for eternity, or until I manually reboot the computer via the power button.
The volume controls on the keyboard don't work at all. When I first boot up the computer, I can press a volume button and the symbol will appear on the screen, but the level won't move up or down and if you press it again after that disappears then it doesn't reappear.
Force Quit and other applications tend to stay on the screen after you click the quit button or other end/cancel button and won't go away until iMac is rebooted manually by button on back.
Safari gets stuck on occasion depending on which site I go to. It happened once when I went to MySpace.com, but only cos of one of the flash sites they were advertising. I went to the same site an hour later and it was fine since it was advertising something else. I have a job site I can't access because when I click on the 'jobs' link to look for a job, it gets 3/4 of the way through the upload and freezes.
And right now I can't tell you which model I have since I can't access the 'About This Mac' info, other than to tell you it's the 20" with 320 GB with Leopard software, Mac OS X v10.5. It gets regular updates.
So... if there's anyone who could help me, I would greatly appreciate it.
Please note, I don't have Apple Care since I can't afford it yet, and I just bought my computer in October 2007. Thanks!

Start with http://www.thexlab.com/faqs/multipleappsquit.html

When is Apple going to fix the problem with external hard drive not working on Lion?

As for everyone else external hard drive does not work with Lion.
When will Apple fix this problem. Do they just ignore the customer : (

Copy off all your data off the NTFS formatted drive to another drive
Open Disk Utility in the Applications>Utilities folder
Select your external NTFS drive on the far left, should have the drive makers name, a ID perhaps plus the word "media"
Click the Partition Tab, click the big box and click 1 Partition
If you want a Mac only drive > Option: GUID >format OS X Extended (Journaled)
If you want a Mac/PC drive (for over 4GB sized files) > Option: MBR > format exFAT
If you want a Mac/PC drive (for the most compatibility with other devices, Win XP, but only under 4GB sized files) > Option: MBR > format MSDOS (FAT or FAT32)
Give it a name and click Apply.
You can also search Microsoft for a free exFAT download if you have Win XP.
https://discussions.apple.com/message/16276201#16276201

Is anyone else having problems with the overdrive app not working right after new apple update

I am having problems with the overdrive app. I am only allowed to read about twenty pages of a book and then it tries to load more pages but does not. I have reinstalled the app but have the same problem. Any ideas.

Have to talked to the developer? Gone to their site? Do they have an update out for the newer OS?

Having problem with iPad 2 sound not working

I can plug in my head phones and sound is fine when I unplug there is no sound.
- I have checked rotation no problems there
- I have double clicked home button and scrolled over the mute button is not the issue but I realized I do not have a volume glider on the right hand side unless I have headphones in.
- any suggestions?

Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

MMS texts not working properly since updating to KitKat

I used to be able to send and receive group texts although I would sometimes have to 'download' the group messages, which was a pain but at least I got the messages. Since updating to KitKat on 5/21/14, I have been unable to receive group texts at all and any pictures are VERY slow in coming to me. For the group texts, I will receive a notification but can never actually SEE the text no matter which way I go in to see the message. With pictures, there will be the little (1) - or whatever number of pics I've received - at the bottom of the messaging icon, but the pictures don't show up at all, or they will come through after I turn the phone off and back on...which I don't do every hour of every day. This is so annoying!
I have seen other people in the forums having similar problems and they have recommended force stopping the messaging app, clearing the data...blah blah...but that doesn't work. I did a chat with a Verizon rep earlier today for about an hour and still didn't get a fix to my issue before I had to sign off of the chat due to a meeting. She had me delete all my text threads (which I wasn't a fan of), and doing the force stop, clear data, clear cache, etc. none of which worked.
This is making me not like my phone right now.

Hi Kevin. Thank you for your response. I was using the normal text messaging application, not Hangouts. I'm having issues with the picture messages no matter where I am at, on Wifi and on mobile data. The Verizon tech I chatted with yesterday had me try both ways and should be documented in my account if you can access that information.
I did try downloading a 3rd party app last night (Textra) and picture messages go fine through that app, but I still have the trouble with group messages. I tried to send a group text to my husband (on an iPhone) and my cousin (on a Samsung) to test things this morning and my cousin received it and my husband didn't. When my cousin responded it went to a single thread, not the group text.
I would really like to just use my phone like normal, without having to find a suitable 3rd party app to make things work right with my messaging.

Problems with swiping, highlighting text, not working properly

Similar Messages

Maybe you are looking for