Problems with synching multi clips to audio

I am using FCP 5. Using the multiclip feature. I have about 30 clips that are in synch. I use audio from only one of the sources. I am doing a music video & I am trying to sync a separate aiff file to the clips in the timeline. It progressively gets out of sych the further into the sequence. what can I do to prevent this?

when you try to sync the calendar, does it stop at a certain part? which part? does it give you an error?
Have you tried going to control panel, mail, profiles, create a test profile. make it the default(dont add an email... just cancel the wizard)
open outlook(which will now be the new default test profile)
create a test entry and try syncing that
also on your device.. open options-advanced options- default services... which email is set for calendar?
on device, open your calendar, click menu button, and options
how many calendars do you see there, and if you click on each one, how many entries do each one have?
check and see if you have facebook 1.5 installed... go through its options, you may see some check boxes for facebook to take over calendar

Similar Messages

Hi Folks, I am using FCPX 10.0.8 on a MPB 10.8.2 with a multi in/out audio device RME Fireface 400. I recorded a timecode track through in 11 and routed it to out 3. Initially it worked, although it did also play timecode through the main outputs 1

Hi Folks,
I am using FCPX 10.0.8 on a MPB 10.8.2 with a multi in/out audio device RME Fireface 400.
I recorded a timecode track through in 11 and routed it to out 3.
Initially it worked, although it did also play timecode through the main outputs 1&2 !!!
Now it has stopped playing TC through output 3.
Is FCPX capable of working with professional audio?
Regards
Donagh Long.

You welcome

Problems with 1.5 and vista - audio recording

Hello. I have PP 1.5. I have an Audio Techinca AT2020USB microphone. I have a couple different computers running 1.5 - The one that has XP as an OS, I can use the mic to record audio. On the computer that runs Vista, I can not. Is anyone aware of any patch or anything that will allow me to make this work?
Please, advise. Thank you.
bobhugejunk

YOU ARE THE MAN!!!! It took a little bit of working the configurations, but I got it to work....oh, me so happy...oh, oh, me so happy
Thank you!
Make sure you visit www.bobhughesmichigan.com for my music samples, schedule and video information!
Date: Wed, 21 Oct 2009 19:34:20 -0600
From: [email protected]
To: [email protected]
Subject: Problems with 1.5 and vista - audio recording
As Jim points out, CS3 was the first Vista-certified version, though many did get PrPro 2.0 to run on it.
Now, if PrPro 1.5 is running otherwise, you might have some luck with http://www.asio4all.com You'll need to download this freeware, install it, and then point PrPro to it in Edit>Preferences>Audio Hardware>Asio Settings for input and output.
Good luck,
Hunt
>

Massive problems with nested multi-cam sequences

Hey all,
I'm absolutely pulling my hair out over some issues I'm having and hope somebody out there might have an answer. I'm creating a short interview project, including interviews of two people individually, with two separate cameras and external sound capture. My goal is to cut between their separate answers to each question. For each interview I created a multi-cam sequence within its own timeline. Then, in my master sequence, I used the source monitor to pull out the specific clips from each interview sequence which I wanted to include, and assembled them into the master timeline.
I'm having two difficulties. First, for whatever reason, I'm experiencing audio glitching when the cuts between sequence clips occur. The glitch is like an audio "scramble," lasts about a half second, plenty of time to be distracting and detract from the whole of the project. There are no such audio glitches present when viewing the interview sequences specifically. I had applied effects to the audio tracks both within the interview sequences and the master sequence. I've since disabled every effect but the problem persists, and it is still present upon rendering the master timeline. I have absolutely no idea what to do about this.
The second issue is more general. I've got my media cache on an internal SSD, and I'm pulling my media from an internal HDD, with Premiere Installed on a different SSD with my operating system. The two interview sequences play back wonderfully, no delays whatsoever. The master timeline, however, with all the clips extracted from the interview sequences, plays slow as molasses. It takes 10-15 seconds for the play head to even start moving once I click 'play', which has made this entire process excruciatingly difficult. Is this a known issue? Why would my performance be so completely degraded working with nested sequences? Isn't everything referencing the exact same files?
Ugh, long night working on this. Thank you for any help.

Well, I've come up with a terrible, but comical solution for the second issue which doesn't involve reworking anything. It turns out that, upon launching premiere, I can play the master sequence with nested multi-cam sequences a grand total of ONCE with minimal delay. If I stop the play through, then it will take 3-4 minutes to get the sequence playing again. Of course, the Premiere decides to hang when I try to close it after playing this master timeline, so I'm finding that I can inch my way through this project by (1) launching premiere, (2) playing the master sequence, (3) make the edits I need, (4) forcibly crash Premiere, and (5) relaunch Premiere and repeat. It's a terrible way to work, but the project is so close to completion that I'm willing to suffer through it.
As to issue 1, I've taken each offending clip, extending the audio track one or two frames in the beginning of each clip, and then use those frames to ramp the volume up from silent to 0db. This seems to avoid the brief moment of distortion at the beginning. Notably I did try your suggestion by going back to the original, source audio, but I was still getting the same issue. My work-around is the only solution I've been able to come up with.

Mouse problem with FCP: drops clips or do not respond to clicks.

hi to all.
since i bought my macpro i've been noticing a very annoying problem when using FCP. there's a moment when the mouse stops to work properly and begins to drop clips when i try to move it or do not respond to clicks. two examples: 1- i want to move a clip from the end of the timeline to its beggining. in the middle of the way, it just drops the clip, as if i stoped pressing the mouse button. 2- i choose the pen tool so i can play with opacity and create fades. in the middle of the process of adjusting, it stops to work. i have to keep pressing several times to complete the action.
the problem is basically with the CLICK function. the cursor responds to the mouse properly, but when you click something to move it, it doesn't recognizes when you stop it and drops things. it happens only with fcp.
i'm using fcp 6.0.1, though the problem happened when i was using fcp 5.

I have a similar problem with my mouse in FCP. Perhaps not the same thing, but I think I figured out it's due to the design of the mouse. It's an Apple A1152, a white one-button mouse with a little scroll wheel. The thing is the whole top presses down for the click, and if I don't grab the two little tabs on the side that give you the leverage to keep on pressing the top, across larger distances I lose the pressure necessary and I drop whatever it is I was dragging. It's a pain because my hand is not the right size or shape to naturally get a hole of those little tabs. I don't know if your problem is related in any way but I thought I'd mention it just in case...,

Problem with synch ipod touch or ipod with itunes

Can somebody help me. I seem to have a problem with itunes. I can synch all the apps on an ipod touch and all the pictures,but not the music.
If I tried the same on a normal ipod, the same thing happened. If I uninstall all the itunes component on my laptop, will I loose all the apps for the ipod touch and all the music stored on itunes?
If you can help thank you.
Pierre

I seem to have a problem with itunes.
What is the problem?
I can synch all the apps on an ipod touch and all the pictures,but not the music.
Why not? What does/doesn't happen?
If I tried the same on a normal ipod, the same thing happened
Perhaps you would be so kind as to enlighten us as to what happened?

Problem with synching iPod 4th gen Nano to iTunes Vista 8.02

Not had a problem with this Nano - sometimes hangs on first play nothing a reset doesn't cure - til now.
For some reason iTunes decided a Smart playlist (To delete - if I rate one star it lists it there) was missing when it was there, just disappeared for a while. It eventually came back after I recreated it.
This meant the other playlists I synch from fell over and refused to synch to the iPod (having a massive collection and only a 8Gb Nano means I tend to have playlist for Recent stuff, and random shuffle type playlists).
So I deleted the condition in those Smart Playlists, and thought it was fine...nope, it now only synchs less that half of the iPod, even though the playlists have loads more tunes in them. Tried deleting the 'To Delete' playlist(s), restoring the iPod, upgrading from 8 to 8.0.2 - no dice. Even a restart and an iPod reset doesn't fix it.
It just says 'synch complete' when there are obviously many more files to download, it usually only does 300-600 then stops. Sometimes it tells me (wrongly) there is not enought space on the iPod by 0.2 of a Gb or something, and says it won't synch. When I reduce the size of one of the playlists, it then goes back to saying 'Synch complete'.
Don't know what's wrong with it - could it be the iTunes library - I moved it to an external USB drive, and switched from my XP machine to this one, but it seemed to be working fine? Hence the restart - I had switched off the drive when I put the laptop into suspend mode, so initially it wasn't there, so I thought iTunes might have gotten confused, and did a restart after upgrade. Still the same.
Any ideas?

Nope still doing it. Just got to 2-thirds full.
So what's happening now it says
'Ipod cannot be synched, playlists are 1.82Gb and there is 1.77Gb on the iPod'
Fine, you then reduce the size of one of the playlists by say 100-200Mb:
Then it doesn't sync those files - it doesn't sync anything and says 'Sync completed' and 'Ok to disconnect'
Argh.
BTW what's sentinel?

Problem with Duplicate Movie Clip which is tracked in an Array

I have a problem with my inventory code using Shared Objects.
What i did was to track the collected items in an array. Each time
the user collects an item, the original iconMC is duplicated and
loads a picture of the item (function loadImage). However, my
problem is that this retains the original array so even if I
already added new items into the inventory, the newest item doesn't
show. original array length = 2, new array length = 3; the last
item doesn't show. If I reload my flash, its the only time that
this shows. Now if I get an item and lessen the inventory, it still
retains the original length and doubles (or triples, depending on
how many items i lessened) the last item.
var so:SharedObject = SharedObject.getLocal("lakbayUser",
var i:Number = so.data.currentUserIndex;
var ctr = 0;
var iconCtr;
var iconArray: Array; //temporary storage of items placed
inside icon
function selectIcon(num){
eval("iconMC"+num)._alpha = 0;
so.data.users
[15][0] = true;
so.data.users[15][1] = iconArray
//loads the next icon
function setNextIconMC(itemCtr, iconCtr){
if(iconCtr > 0) {
newName = "iconMC" + iconCtr;
newPos = 130 * iconCtr;
_root.itemaHolderMC.iconHolderMC.iconMC0.duplicateMovieClip(newName,iconCtr+1);//does
not duplcate if unloadMovie is called
this[newName]._x = newPos;
this["iconMC"+iconCtr].enabled = true;
this["iconMC"+iconCtr]._alpha = 100;
loadMovie("gamit/icon"+itemCtr+".jpg",_root.itemaHolderMC.iconHolderMC[newName]);
trace(_root.itemaHolderMC.iconHolderMC[newName]);
else {
iconMC0.enabled = true;
iconMC0._alpha = 100;
loadMovie("gamit/icon"+itemCtr+".jpg",_root.itemaHolderMC.iconHolderMC.iconMC0);
//loads all the icons into the container
function loadImage(){
iconCtr=0;
iconArray = new Array();
for(itemCtr = 0; itemCtr < so.data.users
[14].length; itemCtr++){
if(so.data.users[14][itemCtr] == true){
iconArray[iconCtr] = itemCtr;
setNextIconMC(itemCtr,iconCtr);
iconCtr++;
if(iconCtr==0){
iconMC0._visible = false;
else iconMC0._visible = true;
loadImage();
so.flush();
stop();

hey there yenniie - each time you update the array you must
also call 'flush' to update the SharedObject. also please use the
'attach code' button to post code, as you can see what happened in
your post with the ' i ' value. So assuming I'm interpreting the
the missing characters correctly the method should be:

Problem with Music for an Car Audio System

Hello,
first I want to apologize for my bad english, because i come from Germany
I have a Problem with my MacBook Pro 2011 and the file transfer (music) on a USB stick.
Whenever I copy music on a USB, everything is copied twice and the second File is copied with an "." previously.
My car detects the files as broken.
Can anybody help me pls???

First try creating a folder or folders to put the music in. Drag the folder to the USB.
See if this helps.
The "." means a hidden file. Does you no good.

Problems with the X-Fi Xtreme Audio Notebook external card..

I recently updated my drivers for this card on my laptop to find out that updating my drivers meant causing my card to stop working. Before I decided to update through vista (probably a bad idea, but I really was hoping to get my new headset to work with Ventrilo and this seemed like the only route left after working on it for hours), the card was working fine. Music sounded amazing, etc etc. However, upon completion of the downlaod and restarting of my computer, the audio driver just stopped working completely.
At this point, this is what is going on: <img> .
I've gone to my devices through the control panel and attempted to revert to my old drivers, yet that doesn't work either. Nothing that I do seems to help, so I've just given up until I get someone who actually knows what they are doing. Here's my specs:
Dell XPS M530 laptop
Vista ?32-bit
4gig RAM
X-Fi Xtreme Audio Notebook
The headset in question is the Creative Fatality 3.5mm jack.
If there is anything else I can do, please let me know.
I just want this to work T_T been at it for around six hours now?

Here's the text of the e-mail I received:
Thank you for writing back and letting me assist you further with your concern.
?
I understand that you are having difficulties with your X-Fi Xtreme Audio Notebook using with your onboard speakers. I apologize for any inconvenience this may have caused you. I know how something like this can really try your patience. Please allow me to explain this further.
?
Please be informed that the sole purpose of your sound blaster is to be used with external speakers and not with the onboard speakers on your laptop. This is also the reason why the effects on the sound card's software have no effect on the onboard speakers.
?
Also, you can only control the onboard speakers through the Sound Blaster volume control when the "Enable Audio Playback Through Notebook Speakers" option is enabled in the Entertainment Mode. If this is disabled, you will not be able to control the onboard speakers.
?
With regards to the effects (CMSS, Crystalizer, Mixer, and Equalizer), you will need to use an external speaker to enjoy these features. These are not applicable with the onboard speakers.
?
Thank you again for visiting Creative Customer Support Services. I hope the information provided was helpful. If you still require assistance, please reply to this email with any previous correspondence to ensure the quickest and most accurate service.

Problem with Synching iPod Touch

Just picked up my iPod Touch today at a local Best Buy. And so far I love it. I love the web browser and youtube. But I have a big problem with syncing it. I spent 2 hours on the phone with the support only to find out I have to wait 3-5 days for a call back. It basically won't sync. It will try and do a couple songs then error out and say device is not connected or device and not be written or read from. Support could not understand the problem and neither can I. I have 2.0 USB ports too. I tried another computer and it worked fine. Anyone got a solution?

Well then I'm all out!
Hope you get it sorted soon.

Problem with synching audio with the metronome!/Background tracks

I'm trying to record a bassline (real bass) from my Lexicon Firewire interface (FW810S) into Logic Express 8.
Even though I'm not hearing any latency with the playback, and I can totally play it on time, when I go to listen to it back, I hear the bassline totally ahead of the metronome. Somewhow it's out of Synch.
What can I do?
I've attached a screenshot of my audio settings.
Thanks in advance, I'm desperate....

See the "Recording Delay" slider. It's set to -5000, Set it to 0 <zero>
How did it get set to the negative like that, I think default is 0.

FCPX10.1.1 does not solve the problem with long-time clip editing!

OS: clean installed mac os10.9.1
FCPX: FCPX10.1.1
Project: 4clips, all of the clips is about 1 hour long (dvcprohd)
Disk: 900MB/S++
machine specs:
2*3.06Ghz 6-core
24GB DDR3
and I've tried these graphic cards:
K5000
and
2 5770
all get the same results:
If I double press the "L" key, the response of FCPX is too slow
If I do other operation like browse the clip, or import long time clip,
the FCPX will become too slow to browse the timeline.
I've found the FCPX like to generate audio waves of the clip and
there's no option to shutdown this! I've tried all the options in FCPX like
do not show the waveform of audio in preference and close the audio waveform in timeline
I don't think I can work the project with 10.1.x.
the 10.0.9 also has the 1st problem, but don't have the 2nd problem.
Another project: 2000++ 4K 50P clips(XAVC), but on FCPX 10.0.9, all of the clips is less than 40mins, always 20seconds.
though it will get slower when we import clips day after day,
it's much more smoother than 10.1.1!!!!!!
so,
I don't think we should update to 10.1.x for the little promotion of performance.
and 10.1.x also do not support nvidia K5000 card.
the render is slower than ait5700.....
I hope apple can solve the problem,
all of the above is just basic editing needs!
if the fcpx can not do even a long-time clip editing
why should I use it?

2 project:
1. 4*1 hour clips dvcprohd
that's the problem! I can not bear it.
2. 2000++clips 4K XAVC 50P project which I don't run on FCPX 10.1.1
I run it in fcpx10.0.9, it's fine, but slower when I imported more and more clips.
until now I can bear it.
the fcpx10.1.1 editing long-time clip has problem:
1.
it use 150MB/s harddisk speed to generate the waveform.
I have 900MB/s disk speed, so that's not the problem,
but it generate all the time!
1 hour clip's wavefrom generates for 1 hour without stopping, if I stop it , the fcpx crashed!
2.
when I skimming the clip for editing, the fcpx gets slower, always 2mins to response my operation.
3.
when I double press J or L key, the fcpx will need about 1 min to response.
the FCPX10.0.9 editing long-time clip problem:
the fcpx10.0.9 can handle the long-time clips, but also has very slow response when I doulbe press J or L key.

Fuji X-trans problem with blue channel (clipping)

One member on Dpreview forum reported this problem:
Lightroom 4.4 bug with new X-Trans handling algorithms. It looks like the blue channel is clipping in some instances, severely distorting handling of highlights. Here's an example
http://i.imgur.com/IyXI7C5.jpg
Link to raw: http://dl.dropbox.com/u/37346336/1275.raf

One might expect an Export function is single-threaded so the number of files exported wouldn’t matter, but perhaps if you are very close to the limit, memory fragmentation comes into play, where LR is requiring contiguous blocks and there aren’t any big enough. It’s probably time to upgrade to a 64-bit Windows system and start getting used to the Metro interface which isn’t bad as long as your frequently-used programs have tiles on the first screen.
Go to Help / System Info… and see how much memory LR has available. On my 32-bit system with 4GB of RAM installed LR only has 716.8MB available which is typical for 32-bit Windows applications:
Built-in memory: 3327.0 MB
Real memory available to Lightroom: 716.8 MB
Real memory used by Lightroom: 160.5 MB (22.3%)
Virtual memory used by Lightroom: 160.8 MB
Memory cache size: 33.2 MB
You could change your VM settings to allocate a multi-gigabyte minimum pagefile size to see if it makes any difference, in case LR is waiting on the VMM to allocate more and then gives up, but I’d expect LR is requiring actual RAM for processing images, not VM which is much , much slower.

HT1369 I am being told i-tunes has detected a problem with your audi configuration. Audio/Video playback may not operate properly". I HAVE CHECKED THAT MY INTEGRATED AMPLIFIER IS WORKING WITH THE LEAD THAT HAS ALWAYS WORKED FROM THE COMPUTER.What should

I am not having any trouble with my i-pod which I can continue to connect to the computer to update. However when I get into the listen to the music on the computer I am unable to hear anything. This is also true for Spotify, and my own cd's inserted in the computer and i-player. I have connected an old Sony Discman to my amplifier and it works perfectly, so I know that the problem is not with the amplifier or the lead so it must be the computer audio.
My computer is a COMPAQ CQ 1140UK SLIMLINE DESKTOP PC.
I need to stress that I am a 65 year old non tech user. I use my computer a lot but have no idea how it works!! .
I believe that in my efforts to resolve this issue myself by going into the control panel .....I may have caused even mor problems.
At first, today, I could see that the track was playing, CURSOR MOVING ACROSS THE TRACK LINE, but I was getting no sound....now the tracks don't even seem to be playing at all!!
I remember, afew days ago seeing something flash up on Spotify about how it was going to do something with my i-tunes but it stated that it was nothing to worry about! So I didn't, until today!!
I only used Spotify to locate a track before I purchased it through i-tunes.
If anybody could advise me of what I could do to resolve this problem then I'd be most grateful.
This is my first time on this Apple Support Community so I hope that I am right in thinking that any response will arrive in my e-mail.
Thanks again
grahamholly

It might be worth trying a dxdiag to see if that finds anything amiss, michael.
Go Start > Run. In your Run, type dxdiag and hit enter.
Work through the troubleshooting tabs. Does dxdiag report any problems?

Problems with synching multi clips to audio

Similar Messages

Maybe you are looking for