Problems with system sleep on new Mac Mini

Hi,
I recently upgraded to the latest Mac Mini & have a problem where the Mac goes to sleep whenever I switch off the display. This is a problem as I have file conversions and a Mozy backup running that I want to run while the screen is off.
I've set the Energy Saver settings to "Never" on both sliders, and I have tried the "MacPilot", "Jiggler" and "Caffine" apps, but none of them prevent the system sleep.
Does anybody have a way to prevent system sleep when the screen has been switched off?
Thanks,
Andy

are you using an apple display?
you could just sleep the display. goto system preferences desktop and screen saver. then click on screen saver. then to hot corners and configure a hot corner to sleep the display.
Then just mouse to that corner and the display instantly sleeps.
Some sleep issues can be fixed by resetting the SMC
Intel-based iMac, Intel-based Mac mini: How to reset the System Management Controller

Similar Messages

Problem with USB speakers and new Mac Mini

I have a USB sound system consisting of a pair of Harman Kardon soundsticks and a woofer from probably 10 years ago (bought and used originally with a Mac). I have tried driving it my new Mac Mini. It works fine for about a minute; then the music stops. Here's what I've tried to diagnose the problem:
1. The problem does not occur when these speakers are driven from my Macbook Air (about 3 years old).
2. The OS and iTunes software is up to date on both machines (10.9.5 and 12.0.1.26).
3. It does not depend on which USB port I use on the Mac Mini.
4. Using a port on a USB extender on the Mac Mini does not solve the problem.
5. The iTunes Preference settings are the same on both machines.

Sorry, no actual experience with USB Audio devices.
I found this in the Pro forum, but the outlook doesn't seem good:
http://discussions.apple.com/thread.jspa?messageID=1739084&#1739084

Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

Baiscally if your Mini came with Lion Pre-installed new then No you can't use XP.
The Lion installed computers no longer support XP OR Vista via Apple's Boot Camp.
For one thing Apple only supported XP with SP2 in order to install it on pre Lion computers.
If the Mini had come pre-installed new with say 10.6 then you could have installed XP and still of been able to upgrade to Lion without any issues as you already have the drivers for XP installed. Lion only has the drivers for W7.

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

Problems with Halo Combat Evolved on mac mini server with HD3000 graphics

There is frequent flickering of certain elements in the game (ie. background) and certain elements such as weapons are not rendered at all. This happens sporatically and not in a predictable manner. Does any body have any idea what is going on? I read that there are some issues with the HD3000 card on mac minis. I hope I did not make a purchase that I will regret.

If I understand your question correctly, is there a reason you've replaced the integrated MySQL within Mac OS X Server with a second MySQL database implementation? (That's almost inherently going to get tangled; you'll need to shut off the default implementation.)
Or is this a Perl module you've loaded and that is now tipping over? If you haven't replaced MySQL here, then have you started MySQL and run some tests with the database itself? This to make sure MySQL is operational, and that the problem you're working on is in the Perl pieces and not in the MySQL layer?

Upgrade to OS 10.4 with SW coming from new Mac Mini (Intel duo core)

Is it possible to upgrade my G4 PowerBook to the latest OS 10.4 and iLife06 with the SW provided and installed on new Mac Mini's with the Intel duo core? That would make purchasing a new Mac Mini a sweeter deal.

No.
The disks that come with new machines are specific to that machine.
You will need Tiger and iLife '06 if you want to upgrade your PowerBook.
Regards,
Colin R.

Problems playing dvds on my new mac mini

I'm trying to play a dvd on my new mac mini & whenever I hit the play button I get error: -70025. I've checked the disc for scratches etc... but all seems fine there. Does anyone know what that error is about or have any suggestions as to what I might be doing wrong?

All i can think of is running a cleaning disk in your Mini's drive. I'd be surprised if the mini needed cleaning since it's so new but you never know. Another question that comes to mind is if that particular DVD has some copy protection that prevents it from being played in computers. Some music CDs have that type of protection.

Problems with SmartDisk Firelite 80gb and Mac Mini

I purchased a SmartDisk Firelite 80gb hard drive to use to dump documents/itunes library onto to free up room on my mini itself. Thing is I work in an MAC/XP enviroment and I would like to be able to go between the both with no problem. The thing is I don't want to use the FAT file system. I would like to use a more secure format. Thing is what is a format the both can read? .. and How can obtain this? I'm not sure if i can partition this particular drive, that is the problem.
Please help !!!!
-thank you .. brian

Hi Brian,
Welcome to Apple Discussions
I believe only FAT32 (MSDOS) are the only Mac OS X and XP compatible volume format. Yes, you can partition your hard drive; you should look at Partitioning a hard disk. You may want to look at Mac OSX Hints: Create HFS+ and FAT32 partitions on one external drive.. Your hard drive should be in FAT32 already, so you shouldn't have to reformat it.
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Dropping WiFi Connections after new Mac Min and Upgrade

First of all does anyone know why this discussion was archived when there was never a solution posted?
https://discussions.apple.com/message/12586041?tstart=0#12586041
Secondly (why I found that thread among many others addressing the same problem). I received a new Mac Mini for XMas (cool, I needed it) which worked fine with my other computer and devices (2 iPads, 2 iPhones, 2 Win7 Laptops and 2 Win7 desktops) for a couple days, so I thought. Now all these devices got along very well until Mr. Mini comes along. Then I note wireless drops occasionally, it seemed to come back so I wasn't too upset, yet and decided to deal with it later and enjoy my vacation.
Now, after I allowed Leopard to do its upgrade (I had deferred that) I now have all the above devices dropping wifi and physical LAN connections as long as this Mini is powered on. I shut it off, Internet is blazing, I turn it on, Internet falters and screeches to a halt.
Since all my other devices have worked cooperatively for several years and this device comes along and crashed the party im pretty convinced its not my router or computers. I am not interested in trial and error here. i have many better more important things to do and this is Apples responsability to figure out. I am a very savy IT dude (career professional) and want to get to the bottom of this for everyone.
Soooo.... What changed? Why does this device kill my network when it is turned on (note, no alterations from out-of-the box to any network protocol or config.) and why does a thread (one of many) without a solution get trumped on by Apple?
Apple?

How to Create & Burn a Bootable Mac OS X Lion Install DVD
Summary
OS X Lion includes a new feature called Lion Recovery that includes all of the tools you need to reinstall Lion, repair your disk, and even restore from a Time Machine backup without the need for optical discs.
To redownload the installer on a computer running OS X Lion, press and hold the Option key while you click the Purchases tab. If the button to the right of the Install Mac OS X Lion item doesn't change to "Install" and allow you to download Lion, use Spotlight to search for "Install Mac OS X Lion" on your computer....
http://support.apple.com/kb/HT4718

Does anybody know if the new mac mini introduced today will do hd audio bitstream?

I'm very interested in the new mac mini that has been unveiled today. I planned to buy one in the past but didn't because it seems that it couldn't do bitstreaming for hd audio (true-hd and dts-hd for example).
As I plan to use it as an htpc with xmbc so this is a feature that is important for me. For what I heard, the last generation of mac mini couldn't not because of the hardware but of a driver issue in mac os x. So I was wondering if that still the case.
Thanks!

The previous model supported multi-channel audio via the HDMI but did not officially support HD audio.
However I seem to recall that XBMC for Mac had already managed to do this on the previous model Mac mini. For clarification since XBMC for Mac managed to do this it would appear the hardware already could do this but Apple have not provided built-in software support for this.
See http://forums.plexapp.com/index.php/topic/42798-hd-audio-codec-support/
I could not find a similar statement saying Plex itself supports HD Audio bit-streaming via HDMI.
With regards to the new Mac mini I do not expect there to be any change. That is OS X itself will not support this, Plex will still not support this but I would still expect XBMC for Mac to support this.
PS. The MacBluRayPlayer I feel also does not support this.

New Mac Mini with Lion Video Problem With Dell E228WFP monitor

Just purchased a new mini Mac 2.3 with Lion pre installed. I connected to my old Dell E228WFPI monitor via the Mini Display to VGA adapter. The mini mac worked fine for an hour until I put it to sleep. It would not rewake. After rebute the gray screen and apple logo appear with clock, but after clock screen to black and monitor goes to power saver mode. Took unit to apple store twice and could not resolve problem by changing resolution or other methiods. Finally, we learned that the system works fine using Belkin HDMI to DVI cable. This Dell Monitor had DVI connector. Hope this helps...

How can a computer that's been turned off (and I mean completely OFF) get a network request? Only a sleeping computer should react to such a request. If you're sure you shut down (Apple Menu, Shut Down), then only an internal power supply or logic board problem should cause this. The only way it could be software is if Lion is not shutting down the computer but is instead putting it to sleep. Is it a new Mac Mini? If so, you should have it replaced or repaired.

My new mac mini with Maverick does not go to deep sleep even if i press power button or Apple-Sleep mode.

Hi.
I have my new mac mini with Maverick that does not go to deep sleep even if i press power button or menu Apple-Sleep mode. He goes only to something like stand-by (power lid is on; after i turn off and then turn on the power he does not wake up just starting). I tried "sudo pmset -a hibernatemode X", tried mode 0,1,3, and even 25. nothing helps. he goes to deep sleep (when all data on HDD) only first time after i change hibernatemode couple times and force it to sleep. Today i even tried to force it to sleep (menu Apple-Sleep mode) and NOT turn off the power for whole night, in the morning he is in this "stand-by" mode anyway.
Could anyone help me please? i need it sleep but don't want to keep my power on for whole night.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Airport Express problems with new MAC MINI and DLINK router SOLVED

Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
Problem was briefly
Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
between us we carried out the folowing and resolved the problem and I am now very happy
mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

Hello macfar14. Welcome to the Apple Discussions!
For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
Just to be sure nothing was missed, here are the basic steps to do this:
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's Network Name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

I have a new Mac mini and are using an Acer monitor. Unfortunately, the Acer will not show any image on a startup from cold. It does however work completely correctly when restarting from 'sleep' condition. Can anyone help? Thanks in anticipation.

I have a new Mac mini- changed from Windows XP. I have a peculiar problem. I use an Acer monitorwith the Mac which works fine when the Mac is 'un-sleeped'. But, if I have shutdown the Mac the Acer does not recognisethe start up - at least it shows nothing on screen. When I have shut down - nowknowing the problem, I use an old Samsung monitor to cope with the start up -it does so fine - and then put the Mac to 'sleep', then change monitors andrestart the Mac - the Acer is now fine. I am using the same cables for theSamsung and the Acer. The Acer had no problems with my old Windows system -from sleep or shut down. I really do not think there is anything wrong with theAcer - could it be some sort of recognition problem? Please can anyone assist.Donald Picton

I posted the same question a day ago with no response. I'm using an Acer x193w. You actually don't have to switch monitors to get it to work. Just make sure you turn off the monitor after shutting down the Mac mini (actually push the power button on the monitor, not just let it go to sleep). If you turn on the monitor (push the power button on the monitor), then power up the Mac mini, the monitor is recognized. The issue didnt exist with Snow Leopard for me. It only started after I started using Lion. Hope this issue gets fixed In a future OS update.

Quality issues with new Mac Mini 09?

I've been itching to hit the 'buy' button -- but in reading the many postings about the new Mac Mini, I'm seeing lots of issues with the bluetooth ... *wireless signal* ...
Is there anyone who's not experiencing any problems?
Sounds like it may be a hardware issue with connections... the last thing I want.
My other choice is the 2008 Mac Pro which seems trouble free.
What do you think?
Thanks.

There is a general issue/trend with the new Mini. There are plenty of reports in these forums and the news has begun to hit the wider press; I guess this is more important to a company with only 2-3% desktop share than posts to these forums. I went to the Genius Bar on Saturday and they have now lodged an official bug report with Apple. It looks like the Mini cannot pair with more than one HCI device. So if you pair with the mouse first the keyboard won't work and vice-versa. They don't think the Mini hardware is broken but that we will just have to wait for Apple to fix the firmware.
Where I do agree is that some issues are OS-X 10.5 related and can therefore affect all Macs. The WiFi has issues where it randomly drops, it doesn't seem able to re-connect at all to channels above 13 and only manually to channels below 12. The system resume function is unreliable. All these started when we moved from 10.4 to 10.5 and so far they have not been addressed. One issue is that there does not appear to be a way for users to log bug reports, except when software crashes. However, the bluetooth issues on the Mac do appear real and are either firmware or hardware related.

Problems with system sleep on new Mac Mini

Similar Messages

Maybe you are looking for