Problems with task escalation in SOA11g

Dear All,
I need some help with task esclation in SOA11g,
I am working on SOA 11.1.1.3.0 and weblogic 10.3,
i have a requirement where in i want a task *(that expires after a certain period) to be escalated to the user's manager and at the same time make it available in the user list of task's.*
i am able to escalate the task to the user's manager after it expires but it get's removed from the user's list of task.
is their a way in which i can do both,i mean escalate the task to the manager as well as make it avaialble for the user rather than removing the task from his list.

I considered even this option i.e to assign the task to the user and escalate it to the manager at the same time
But the problem with this is approach is that the status of the task thats assigned to the user will be ASSIGNED or REASSSIGNED and not ESCALATED.
Thks for the reply anyways!!!
Regards
Ajay.v

Similar Messages

Problem with tasks

since upgrade I can't add tasks to my existing task list. It keeps wanting me to create a new list which I don't want to do, and if I do it doesn't sync with my computer. Any suggestions?

Hello Firearth
Check out the article below to troubleshoot issues with Tasks not being updated and being added to current tasks. One quick thing to try is to turn off the tasks
iCloud: Troubleshooting iCloud Reminders and Tasks
http://support.apple.com/kb/ts4000
Regards,
-Norm G.

Problems with task in data acquisition

Hallo,
I'm trying to acquire current measures and then converting it in different values (temperature, pressure and flow). For this reason I've created a specific task in which every current measure is converted in the apposite measure and obviously for every channel the acquisition rate is setted (for examplethe acquisition rate for the temperature can be slowly than the flow).
I tried to generate code with example from the task constant, but nothing is displayed in the waveform graph.
If I use the daq assistant everything is ok.
I think to make mistakes with the generation of the task but I can't understand where is the error exactly.
Another thing that I've noticed is that sometimes there are problems in the visualizations of the scaled values also using the daq assistant, may be is better to scaling the values outside the task and then visualize and storage it?
Labview 8.6
PXI-1042Q
PXI-6704
PXI-6229

These are the files, how should I modify the the voltage task.vi in order to scaling tha value of the channels?
Message Edited by Pablo! on 02-01-2010 05:25 AM
Labview 8.6
PXI-1042Q
PXI-6704
PXI-6229
Attachments:
Acq.Voltage.7z ‏19 KB

Wierd Problem with task switching ( cmd+tab)

I rather put an image, because it's rather difficutl to explain:
[img]http://img123.imageshack.us/img123/5439/14060612097cu.th.jpg[/img]
I'm using shapeshifter, no way I change the theme (or use the original one), the problem is still there.
I repaired permissions and all that stuff with Onyx, same thing
any idea?¿
Mini 1.42 80 Gb HD + EZ Mini 250 Gb / 1gb RAM/Bt/Ap/Sd Mac OS X (10.4.6) Apple BT Keyboard & NGS "Snake" BT Mouse + Samsung 913v + M-Audio Mobile Pre

I don't remember when it showed, but in any case, it's been a long time I use shapeshifter, and I don't remember having this problem.
So long, I have disabled shapeshifter, logged into a newly created account, moved non-essential fonts, cleared font cache... the problem remains.
I have made some extra few caps to explain better:
When I press cmd+tab, all open apps show on top
When selecting the first app (starting from the left), you can notice de name of the app is "slightly" shifted to the left.
This "sums" for each app, so at the third o fourth, looks like this:
If you have 7-8 open apps, the last one selected has no more the text inside the grey spot
And this is how it looks (yeaks)
Hope it's explained better....

Problem with Task Aggregation from Project Server with old Project Server permissions mode.

Hi, I have installed Sharepoint 2013 with all CU, and Project Server 2013 with June CU update. Later, I attached database from old Project Server 2010 database, all was OK, but now I have my PWA with old Project Server permissions mode.
After that I have created MySite with users from AD of my company, it's OK, but Task Aggregation not working. Moreover, I have not any errors on the MyTask page.
You can see that I can insert private tasks, but I can not see any tasks from pwa, however I have a lot of tasks there. Please help me.
My search works well amd WMA Service too.
Where directly crawler search the tasks? Maybe there are errors in search log with that ulrs?

Hi,
did you setup the Work Management Service Application in the Central Administration? If yes, please check if the Applicationpool account of the Work Managment Service has full Access to the User Profile Service Application (over the Ribbon | Permissions).
Check also if your Projects are published so that you have a Project Workspace for each Project. In the workspaces you should have a list "Tasks" or "Tasks1" for migrated workspaces. This is important because only Tasks from the workspaces' Tasklist are
shown in the Mysite
In any other cases please check the ULS Log and/or the Application Event log. Especially have a look to Distributed Cache Service and the Feed Cache.
Bernhard Fischer [MVP] | www.wodey.de

Problem with Task 65400034 BOR BUS2105 method EDITASYNC

Hi all,
i implement Workflow scenario for purchase requisition, i use the SAP standard workflow. When a user reject a purchase requisition the system launch the workflow n° 65400029, the first activity is the task n° TS65400034 which execute the method EDITASYNC of the BOR BUS2105. Normally the user can modify the purchase requisition but in my case, all field are disabled, i can't do any changes yet i'm in transaction ME52N.
Thansk for help.
Cheers.

Hello,
this is working as-designed:
When the purchase requisition/order is rejected, it gets protected and the requisition/order is not changeable, anymore.
To start a re-approval, the initiator needs to "Cancel the rejection", which is done in the release transaction (ME54N, ME29N). After done so, all fields become editable again.
On saving the document, new events .ReleaseStepCreated will be created by the transaction setting it back into the release process.
To avoid confusions for the initiator/user here, you should call the method .SingleRelease instead of .EditAsync
Best wishes,
Florin
Edited by: Florin Wach on Nov 5, 2008 12:09 PM Some typos corrected

Problem with task to object status mapping

Hi,
There is a task 'Create User' on which on completion changes the object status to provisioned.
There is a subsequent task named 'Update form' which on rejection should change the object status back to provisioning.
I have implemented this logic in the 'Task to Object Status Mapping' Tab in Design console.
However, this change is not reflecting. What is the best solution in this case?
Regards,
SK

once the resource get provisioned you can have only three status
Enabled, Disabled and Revoked
You can't do it provisioning or any other
These status shows resource status. Now, once user get provisioned how it can be provisioning(failed). May some update fails that doesn't mean user is not provisioned.
Yes, you can't do workaround what Gyan suggested you
--nayan

Problem with task realisation

I have to create an application which for 3 different ranges of sound frequency (which user can adjust on screen) turns on one of three alarms:
1. text warning on user interface
2. blinking of LED indicator
3. sound signal warning.
I have realised a part of the code, but I am not sure if my algorythm is good.
Here is my code: Sound Frequency Detector.vi

Thank you fo recommendations! I made it work, though not all the things I need, but it's not bad for the beginning. I just didn't succeed to make it with while loop. It doesn't read frequency for some reason then.
Best regards,
Milos Mladenovic
Attachments:
sound frequency detector.vi ‏22 KB
frequency display.vi ‏15 KB

Problem with follow-up transaction from task

Hello,
I have a problem with creating follow-up transaction from tasks. Here is the problem,
I've defined two new transaction types Z010/Z020 with business transaction category BUS2000125 TASK and I want to be able to create follow-up transaction from them. After defining them I've mapped the copying control so that I'm able to create opportunities, tasks and leads from those transaction types. However, when I'm testing there is a problem. Here are the steps I'm performing:
1: I'm creating a new Task from any of those two transaction types (Z010/Z020)
2: I'm saving the transaction and then I save it.
3: Open the transaction More -> Create follow up
4: A pop-up window appears with the possible follow-up transactions (in this case task/opportunity or lead).
5: I click on any of those but nothing happens - no indication of error or whatsoever the screen just stays the same and I'm able to click on More -> Create follow up and choose any of the possible entries. However, there is no result.
I have a requirement for follow up transactions from opportunities and everything works just fine there, the problem is only with Tasks. I've tested this from the backend (CRMD_ORDER) and I'm able to create a follow-up from this transaction types (Z010/Z020), so the problem seems to be something with the CRM UI. If any of you have an idea why is this happening and how to fix it, please tell.
Thanks in advance!

Hi John,
Please refer as well to note 661305:
this part:
Note:
As of CRM 7.0, this modification is no longer required because the IMG
activity "Activate Copying Control for Activities" is provided (maintaining the
table/view CRMC_ACT_COPY_SW in transaction SM30). Here you can decide whether
the copying control for activities and tasks (BUS2000126 and BUS2000125) is
active or inactive depending on the specific client.
IMG path
(transaction SPRO):
Customer Relationship Management
-->
Transactions
--> Settings for Activities
--> Activate Copying
Control for Activities
In the standard system, the copying control for
tasks and activities remains inactive.
========================================================
Best regards - Christophe

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message?

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to use sync data in my iphone back to itune n my lap top. how can I perform this task with out loosing data in my i phone.

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to sync data in my iphone back to itune on my lap top. how can I perform this task with out loosing data in my i phone.

Hey floridiansue,
Do you have an installed email program such as Microsoft Outlook? If your email is through an online login, such as Gmail, etc, then one will have to create an email association with a program such as Microsoft Outlook on the PC for this Scan to Email system to function.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Problem with complete task via email

Hello,
I have problem with complete task via email. I found this blog very useful (http://blogs.adobe.com/ADEP/2010/11/how-to-complete-a-task-via-email-using-reply-to-comple te.html), but...
I set up everything as it’s written in blog mentioned above. When a task is assigned to me, I received an email notification with actions (accept, deny). After that I replied with action “accept”. Then I received email with subject “Errors from LiveCycle ES”:
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.pof.POFRuntimeException: Transaction is not active: tx=TransactionImple ; – nested throwable: (javax.resource.ResourceException: Transaction is not active: tx=TransactionImple )
This response to your original email
Subject:RE:Task Assignment – Process: Test/Email_Test. Task 76 has been assigned to you.
Date Sent:Thursday, October 24, 2011 1:17 PM
Body:accept
DO-NOT-DELETE: MTMhMzE0ITMyOA==!
Attachments:
In log appeared this following error:
Caused by: ALC-DSC-215-000: com.adobe.idp.dsc.DSCRuntimeException: None of the Auth Provider could authenticate the user. Authentication Failed
at com.adobe.livecycle.notification.TaskNotificationServiceImpl.processEmailComplete(TaskNot ificationServiceImpl.java:1157)
Can you me please? I have no idea what to do to succesfully complete task via email endpoint. Thanks
Jan Petrla

Hi Diana, thanks for your reply.
You're probably right about 2 different error messages.
To the 1st one: I'm sure that status task is Assigned (to me). I received an email and I also reply on that email.
To error log: I found out that error log appears when I enable email endpoint on Complete Task service. But I managed to solve this problem. I set wrong user. Now I have here the same user as is written in login-config.xml so log seems to be ok.
So I created new task and tried to complete it via email. Now I receive email with another error:
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error getting user context
This response to your original email
Subject:RE:Task Assignment - Process: WorkFlowClient/Test. Task 92 has been assigned to you.
Date Sent:Thursday, October 27, 2011 3:05 PM
Body:Complete
DO-NOT-DELETE: MTIxMSExNjAzITIwMTE=!
Attachments:
And to the last point: email endpoint is set up with TestPOP3@mydomain and user receiving email has jpetrla@mydomain. I use Lotus Notes as email client, I tried another account with gmail, but the result was same.
Now I really don't know to do...
Jan

Problem with clientgen task in weblogic 9.0

hi,
While developing webservices for our project, we used the clientgen ant task for generating the artifacts on the client side. I'm getting trouble in returning a collection of objects (list, vector) from the server to the client. When i try to do so, the clientgen task tries to create a java.util package on the client side in which it creates a List class which basically contains an object array with getter-setter. What i want is for the sun java collections classes to be used instead. The above problem applies to both user-defined as well as built-in objects i.e. say a list of objects of type T or a list of Strings. If someone, has any pointers regarding the same plz help...
tia,
cyril

          Try limiting the length of the session id.
          This is in either the weblogic.xml/web.xml
          files. You can get the dtd in the 6.0 doc.
          "Thierry Cools" <[email protected]> wrote:
          >Hi I have a problem with the session id that is generated in tha address bar
          >of my brower
          >When I start my application the following link appears
          >
          >http://127.0.0.1:7001/ebpp_beans/enterLogonInformation.do;jsessionid=Olw9VMc
          >0I1Z52YMgycyD23c8L4Ch2FurHLwbV2WhZw731dR3mBtJ|8186718416288373359/-140823374
          >1/7001/7002
          >
          >It seems that Weblogic 6.0 generates '/' characters in the session id.
          >This has for consequences that the servlet engine is taking the session id
          >in its context path, so that none of my links are working anymore.
          >
          >Could someone give me a clue to solve this problem
          >Thanks,
          >Thierry
          >
          >--
          >
          >Thierry Cools
          >
          >Senior Java Developer
          >S1 Brussels
          >Kleine Kloosterstraat, 23
          >1932 st. Stevens-Woluwe
          >Belgium
          >Tel : +32 2 200 43 82
          >Email : [email protected]
          >
          >
          >

Problem with remove task from schedule in PWA

In our environment problem with remove task from schedule by PWA.
Problem is only when I want to remove few task in the same time, but the operation one by one is correct.
In my opinion problem is with calculation schedule after remove tasks, column ID include wrong value it means that Number ID does not generate in the correct order same of numer
disappear. Click Calculate button on ribbon causes problem with finshed operation and save project.
Problem occurs only machine with IE 11.0 browser without compability mode, on other machine for example on the same project with IE 8,9,10 everything is correct.
Problem appeared recently, earlier everything was OK.
Txn, Dariusz Moczyński

Hi Darius,
I'm a bit confused. You are now talking about 2 issues.
For the first one, you cannot edit anymore tasks in PWA, with any browser versions? Is it happenonog for any users on any projects? Try the following solutions publish the project from Project Pro and see if it helps. Press CTRL F5 to delete IE cache. Ensure
that your PWA URL is added to the trusted site and/or compatibility sites. Check for the ULS logs or javascript errors.
For the second issue, please refer to my previous reply, this obviously cannot be considered as a bug since it is happening with a non supported browser version and working properly on supported versions of IE.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Problems with wlserver ant task for WL 8.1

hi
i have a problem with using wlserver ant task for Weblogic 8.1
basically i want to start the server that is already preconfigured and deploy
one ear.
here's what i do:
<taskdef name="wlserver" classname="weblogic.ant.taskdefs.management.WLServer">
<classpath refid="lib.classpath"/>
</taskdef>
<wlserver action="start" dir="D:/BEA/user_projects/domains/mydomain"
output="wls81.log"/>
(and then the deployment task - irrelevant here)
the classpath is generated automatically and includes all jars in the specific
project directory:
     <path id="lib.classpath">
     <fileset dir="${proj.lib.dir}">
          <include name="**/*.jar"/>
     </fileset>
     </path>
(weblogic.jar is there as well)
the problem is when i run it, the following happens:
- if i have action="start" (or no action attribute at all), i get the following
exception:
java.lang.NullPointerException
at weblogic.Home.<init>(Home.java:29)
at weblogic.Home.getInstance(Home.java:86)
at weblogic.Home.getPath(Home.java:94)
at weblogic.Home.getFile(Home.java:99)
at weblogic.ant.taskdefs.management.WLServer.execute(WLServer.java:260)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:193)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at org.apache.tools.ant.Project.executeTargets(Project.java:1255)
at org.apache.tools.ant.Main.runBuild(Main.java:609)
at org.apache.tools.ant.Main.start(Main.java:196)
at org.apache.tools.ant.Main.main(Main.java:235)
- if i change it to action="startup" as specified on "wlserver Ant Task Reference"
it seems that this task is skipped completely. no error messages, no stack trace,
nothing. i tried -verbose and -debug options on ant, but there're no logs displayed
whatsoever. it takes less than a second to run this task so i presume it's just
getting skipped completely.
i run this from the standalone Ant 1.5.4 on Windows environment.
i've followed the topic "wlserver Ant task for WebLogic 8.1" where kind of similar
problem is described but putting weblogic.jar on the system CLASSPATH is not an
option for this project.
anyone has any idea about how to get this going?
cheers
Andrei

sounds bug to me. NPE should be correctly handled with appropriate error
message. Please contact BEA support to log the call.
"Andrei Rusakou" <[email protected]> wrote in message
news:[email protected]...
>
hi
i have a problem with using wlserver ant task for Weblogic 8.1
basically i want to start the server that is already preconfigured anddeploy
one ear.
here's what i do:
<taskdef name="wlserver"classname="weblogic.ant.taskdefs.management.WLServer">
<classpath refid="lib.classpath"/>
</taskdef>
<wlserver action="start" dir="D:/BEA/user_projects/domains/mydomain"
output="wls81.log"/>
(and then the deployment task - irrelevant here)
the classpath is generated automatically and includes all jars in thespecific
project directory:
<path id="lib.classpath">
<fileset dir="${proj.lib.dir}">
<include name="**/*.jar"/>
</fileset>
</path>
(weblogic.jar is there as well)
the problem is when i run it, the following happens:
- if i have action="start" (or no action attribute at all), i get thefollowing
exception:
java.lang.NullPointerException
at weblogic.Home.<init>(Home.java:29)
at weblogic.Home.getInstance(Home.java:86)
at weblogic.Home.getPath(Home.java:94)
at weblogic.Home.getFile(Home.java:99)
atweblogic.ant.taskdefs.management.WLServer.execute(WLServer.java:260)
atorg.apache.tools.ant.UnknownElement.execute(UnknownElement.java:193)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at org.apache.tools.ant.Project.executeTargets(Project.java:1255)
at org.apache.tools.ant.Main.runBuild(Main.java:609)
at org.apache.tools.ant.Main.start(Main.java:196)
at org.apache.tools.ant.Main.main(Main.java:235)
- if i change it to action="startup" as specified on "wlserver Ant TaskReference"
it seems that this task is skipped completely. no error messages, no stacktrace,
nothing. i tried -verbose and -debug options on ant, but there're no logsdisplayed
whatsoever. it takes less than a second to run this task so i presume it'sjust
getting skipped completely.
i run this from the standalone Ant 1.5.4 on Windows environment.
i've followed the topic "wlserver Ant task for WebLogic 8.1" where kind ofsimilar
problem is described but putting weblogic.jar on the system CLASSPATH isnot an
option for this project.
anyone has any idea about how to get this going?
cheers
Andrei

Problems with task escalation in SOA11g

Similar Messages

Maybe you are looking for