Problems with the Actionscript parser

We just upgraded to MX 7.02 from MX 6.1 here. I've been
playing around with the new flash forms and actionscript to see how
easy it would be to replicate some of the things we did with
javascript in actionscript.
While debugging one of the scripts I noticed that whatever
parses the actionscript for syntax errors was picking up illegal
keywords in areas where keywords aren't typically allowed. It finds
them in comments, strings, tooltips, and just about anywhere
actionscript is allowed. Unfortunately, three of the keywords
(import, new, and delete) are pretty common in comments and
tooltips.
I didn't notice anything about this in the known issues for
7.02. Is anyone aware of a current hotfix or one coming soon to fix
this issue? Are there any workarounds or should I just try to avoid
the use of those words until the next update?

Similar Messages

Problem with the NodeManager in Weblogic 10.0 MP1

Hi,
I have a problem starting the Nodemanager successfully. I have currently installed BEA Weblogic 10.0 MP1. The admin server is getting started successfully. When, I start the Nodemanager with the command:
startnodemanager -machine <hostname>, it neither gives the success message nor the error message. It comes to a stand still. Please see the below text, which appears on the Command prompt, when I run the nodemanager command.
Machine PUNITP128166D.ad.infosys.com
Listen Address: PUNITP128166D.ad.infosys.com
Listen Port: 8097
PID for D:\Ariba9r1\shared/bin/startNodeManager.cmd: 5980
D:\Ariba9r1\BuyerDev9r1\Server\bin>
D:\Ariba9r1\BuyerDev9r1\Server>set CLASSPATH=D:\BEA10\wlserver_10.0\server\lib\A
ribaWebLogic81Patches.jar;.;D:\BEA10\jdk150_11\lib\tools.jar;D:\BEA10\wlserver_1
0.0\server\lib\weblogic_sp.jar;D:\BEA10\wlserver_10.0\server\lib\weblogic.jar;
D:\Ariba9r1\BuyerDev9r1\Server>chdir /d "D:\Ariba9r1\shared\nodemanager"
D:\Ariba9r1\shared\nodemanager>"D:\BEA10\jdk150_11\bin\java.exe" -client -Xms32m
-Xmx200m -XX:MaxPermSize=128m -XX:+UseSpinning -Xverify:none -classpath "D:\BE
A10\wlserver_10.0\server\lib\AribaWebLogic81Patches.jar;.;D:\BEA10\jdk150_11\lib
\tools.jar;D:\BEA10\wlserver_10.0\server\lib\weblogic_sp.jar;D:\BEA10\wlserver_1
0.0\server\lib\weblogic.jar;" -Dbea.home=D:\BEA10 -Djava.security.policy=D:\BEA1
0\wlserver_10.0\server\lib\weblogic.policy -DSavedLogsDirectory=D:\Ariba9r1\shar
ed\nodemanager\logs -DJavaHome=D:\BEA10\jdk150_11 -DTrustedHosts=D:\BEA10\wlserv
er_10.0\common\nodemanager\config\nodemanager.hosts -DListenAddress=PUNITP128166
D.ad.infosys.com -DListenPort=8097 -DReverseDnsEnabled=true -DLogToStderr=true -
DLogFile=D:\Ariba9r1\shared\nodemanager\nodemanager.log -DNodeManagerHome=D:\Ari
ba9r1\shared\nodemanager weblogic.NodeManager
After this, when I check the nodemanager status in Console, then the status appears as REACHABLE. Assuming, this to be the successfully message, I try to start the managed servers associated with the Machine/Server. But, it fails and there appears a message on the console with the status as 'Force Shutting Down' for this server.
When I check the logs, there seems to be some problem with the Nulll exception. Please see the below logs as it appears, its only a part of the logs
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040306> <JMS service is active now.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <SAFService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226041> <BEA-281003> <SAF Service has been initialized.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <SAFService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226041> <BEA-281002> <SAF Service has been started.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226120> <BEA-101128> <Initializing HTTP services.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101135> <buyerserver1 is the default Web server.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101052> <[HttpServer (defaultWebserver) name: buyerserver1] Initialized>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101129> <Initializing the Web application container.>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226198> <BEA-180046> <INFO: Logging service enabled.>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC license service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Task Manager instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC security service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Transaction service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226229> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226229> <BEA-220027> <Web Service reliable agents are started on the server.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <JMX> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226604> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://PUNITP128166D.ad.infosys.com:8050/jndi/weblogic.management.mbeanservers.runtime .>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebLogicServer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226651> <BEA-000287> <Invoking startup class: ariba.j2ee.appserver.weblogic.Startup.startup(directory=D:\Ariba9r1\BuyerDev9r1\Server)>
####<Jun 28, 2010 4:20:27 PM IST> <Info> <WebLogicServer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722227229> <BEA-000288> <ariba.j2ee.appserver.weblogic.Startup reports: Changed directory to D:\Ariba9r1\BuyerDev9r1\Server>
####<Jun 28, 2010 4:20:27 PM IST> <Info> <Management> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722227244> <BEA-141187> <Java system properties are defined as follows:
ariba.server.home = D:\Ariba9r1\BuyerDev9r1\Server
awt.toolkit = sun.awt.windows.WToolkit
bea.home = D:\BEA10
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.headless = true
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBOracleJDBC.zip;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBDB2JDBC.zip;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBMssqlJDBC.zip;D:\BEA10\wlserver_10.0\server\lib\weblogic.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes;D:\Ariba9r1\BuyerDev9r1\Server\classes\AribaJ2EE.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions;D:\BEA10\wlserver_10.0\server\lib\wls-api.jar
java.class.version = 49.0
java.endorsed.dirs = D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed
java.ext.dirs = D:\BEA10\jdk150_11\jre\lib\ext
java.home = D:\BEA10\jdk150_11\jre
java.io.tmpdir = C:\DOCUME~1\suram_vishal\Local Settings\Temp\
java.library.path = D:\BEA10\jdk150_11\bin;.;C:\SYSROOT\system32;C:\SYSROOT;D:\BEA10\wlserver_10.0\server\bin;D:\BEA10\jdk150_11\bin;D:\BEA10\patch_wlw1001\profiles\default\native;D:\BEA10\patch_wls1001\profiles\default\native;D:\BEA10\wlserver_10.0\server\native\win\32;D:\BEA10\wlserver_10.0\server\bin;D:\BEA10\modules\org.apache.ant_1.6.5\bin;D:\BEA10\jdk150_11\jre\bin;D:\BEA10\jdk150_11\bin;D:\Ariba9r1\BuyerDev9r1\Server\bin;D:/Ariba9r1/BuyerDev9r1/Server/bin/Win32;D:/Ariba9r1/BuyerDev9r1/Server/bin;C:\SYSROOT\system32;C:\SYSROOT;C:\SYSROOT\System32\Wbem;C:\Program Files\Java\jre1.5.0_06;C:\Program Files\CA\SharedComponents\CAUpdate\;C:\Program Files\CA\SharedComponents\ThirdParty\;C:\Program Files\CA\SharedComponents\SubscriptionLicense\;C:\Program Files\CA\eTrustITM;C:\Program Files\CA\SharedComponents\ScanEngine;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\BEA10\wlserver_10.0\server\native\win\32\oci920_8;D:\Ariba9r1\BuyerDev9r1\Server;D:\Ariba9r1\BuyerDev9r1\Server\bin;D:\Ariba9r1\BuyerDev9r1\Server;D:\Ariba9r1\BuyerDev9r1\Server\lib\Win32;D:\Ariba9r1\BuyerDev9r1\Server\internal\lib\Win32
java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
java.protocol.handler.pkgs = weblogic.utils|weblogic.utils|weblogic.utils|weblogic.net
java.runtime.name = Java(TM) 2 Runtime Environment, Standard Edition
java.runtime.version = 1.5.0_11-b03
java.security.policy = D:\BEA10\wlserver_10.0\server\lib\weblogic.policy
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.5
java.vendor = Sun Microsystems Inc.
java.vendor.url = http://java.sun.com/
java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi
java.version = 1.5.0_11
java.vm.info = mixed mode
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 1.5.0_11-b03
javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
javax.xml.rpc.ServiceFactory = weblogic.webservice.core.rpc.ServiceFactoryImpl
javax.xml.soap.MessageFactory = weblogic.webservice.core.soap.MessageFactoryImpl
org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
org.xml.sax.driver = weblogic.apache.xerces.parsers.SAXParser
org.xml.sax.parser = weblogic.xml.jaxp.RegistryParser
os.arch = x86
os.name = Windows 2003
os.version = 5.2
path.separator = ;
sun.arch.data.model = 32
sun.boot.class.path = D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\serializer.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xalan.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xercesImpl.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xml-apis.jar;D:\BEA10\jdk150_11\jre\lib\rt.jar;D:\BEA10\jdk150_11\jre\lib\i18n.jar;D:\BEA10\jdk150_11\jre\lib\sunrsasign.jar;D:\BEA10\jdk150_11\jre\lib\jsse.jar;D:\BEA10\jdk150_11\jre\lib\jce.jar;D:\BEA10\jdk150_11\jre\lib\charsets.jar;D:\BEA10\jdk150_11\jre\classes
sun.boot.library.path = D:\BEA10\jdk150_11\jre\bin
sun.cpu.endian = little
sun.desktop = windows
sun.io.unicode.encoding = UnicodeLittle
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = Cp1252
sun.management.compiler = HotSpot Client Compiler
sun.os.patch.level = Service Pack 2
user.country = US
user.dir = D:\Ariba9r1\BuyerDev9r1\Server
user.home = C:\Documents and Settings\suram_vishal
user.language = en
user.name = suram_vishal
user.timezone = Asia/Calcutta
vde.home = D:\BEA10\user_projects\VanillaBuyer\servers\buyerserver1\data\ldap
weblogic.Name = buyerserver1
weblogic.ReverseDNSAllowed = false
weblogic.classloader.preprocessor = weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
weblogic.management.server = http://PUNITP128166D.ad.infosys.com:8099
weblogic.net.http.URLStreamHandlerFactory = ariba.util.net.URLStreamHandlerFactory
weblogic.nodemanager.ServiceEnabled = true
weblogic.security.SSL.ignoreHostnameVerification = true
weblogic.security.TrustKeyStore = DemoTrust
weblogic.system.BootIdentityFile = D:\BEA10\user_projects\VanillaBuyer\servers\buyerserver1\data\nodemanager\boot.properties
>
####<Jun 28, 2010 4:20:29 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <main> <<WLS Kernel>> <> <> <1277722229510> <BEA-000365> <Server state changed to STANDBY>
####<Jun 28, 2010 4:20:29 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <main> <<WLS Kernel>> <> <> <1277722229525> <BEA-000365> <Server state changed to STARTING>
####<Jun 28, 2010 4:20:29 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722229572> <BEA-149209> <Resuming.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230182> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_NEW to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149060> <Module Buyer of application Buyer successfully transitioned from STATE_NEW to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_PREPARED to STATE_ADMIN on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149060> <Module Buyer of application Buyer successfully transitioned from STATE_PREPARED to STATE_ADMIN on server buyerserver1.>
####<Jun 28, 2010 4:20:35 PM IST> <Warning> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722235212> <BEA-101162> <User defined listener ariba.server.ormsserver.ServletContextListener failed: java.lang.NullPointerException.
java.lang.NullPointerException
     at java.util.Hashtable.put(Hashtable.java:396)
     at ariba.j2ee.weblogic.Properties.initialize(Properties.java:53)
     at ariba.j2ee.core.J2EEServer.initialize(J2EEServer.java:77)
     at ariba.j2ee.core.AribaServletContextListener.contextInitialized(AribaServletContextListener.java:25)
     at ariba.server.ormsserver.ServletContextListener.contextInitialized(ServletContextListener.java:26)
     at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:458)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:168)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1744)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2909)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:973)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:361)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:182)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:359)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
>
####<Jun 28, 2010 4:20:35 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722235212> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_ADMIN to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:35 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
####<Jun 28, 2010 4:20:35 PM IST> <Alert> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
####<Jun 28, 2010 4:20:35 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Kindly help me in getting this resolved.
Thanks,
Vishal.

The error appears to come from the ariba code. I suggest asking them.
java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:396)
at ariba.j2ee.weblogic.Properties.initialize(Properties.java:53)

Problem with the importing wizard

Hei,
I have a dll which I want to import to the Labview project. So, I decided ti use the import wizard, but when parsing the header file, Labview freezes. I am using a couple of structures (3) and a handle. I have also read that the wizard has problems when dealing with complex data. What would be best solution for adding it to the project? To in a way "unbundle" the struct and then create a many simple variables and then parsed to dll. (This would be a pain)
How to deal with the handle or will wizard easy understand that?
I am really looking for a painless solution
thanks for the help

Can you post the header file for the DLL?
Through a process of trial and error you could determine which functions causes problems with the wizard (comment out half the functions, attempt to import, repeat) and then manually create the LabVIEW VIs for the troublesome ones. If there aren't too many functions, you could do it all by hand, which isn't that hard if you have some understanding of C (and if you don't, you'll undoubtedly have other problems when the wizard doesn't do the right thing).

Problem with the cache hit ratio

Hello,
I ma having a problem with the cache hit ratio I am geting. I am sure, 100% sure, that something has got to be wrong with the cache hit ratio I am fetching!
1) I will post the code that I am using to retrieve the cache hit ratio. I've seen about a thousand different equations, all equivalent in the end.
In oracle cache hit ratio seems to be:
cache hits / cache lookups,
where cache hits <=> logica IO - physical reads
cache lookups <=> logical IO
Now some people use the session logical Reads stat, from teh view v$sysstat; others use db block gets + db consistent gets; whatever. At the end of the day its all the same, and this is what i Use:
SELECT (P1.value + P2.value - P3.value) AS CACHE_HITS, (P1.value + P2.value) AS CACHE_LOOKUPS, P4.value AS MAX_BUFFS_SIZEB
FROM v$sysstat P1, v$sysstat P2, v$sysstat P3, V$PARAMETER P4
WHERE
P1.name = 'db block gets' AND
P2.name = 'consistent gets' AND
P3.name = 'physical reads' AND
P4.name = 'sga_max_size'
2) The problem:
The cache hit ratio I am retrieving cannot be correct. In this case i was benchamarking a HUGELY inneficient query, consisting of the Union of 5 Projections over the same source table, and Oracle is configured with a relatively small SGA of 300 MB. They query plan is awful, the database will read the source database table 5 times.
And I can see in the physical data statistics of the source tablespace, that total Bytes read is aproximatly 5 times the size of the text file that I used to bulk load data into the databse.
Some of the relevant stats, wait events:
db file scattered read     1129,93 seconds
Elapsed time: 1311,9 seconds
CPU time: 179,84
SGA max Size: 314572800 Bytes
And total bytes read: 77771964416 B (aproximatly 72 Gga bytes)
the source txt loaded to the database was aprox 16 G
Number of reads was like 4.5 times the source datafile.
I would say this, given the difference between CPU time and Elapsed Time, it is clear that the query spent almost all of its time doin DB file scattered reads. How is it possible that i get the following cache hit ratio:
Cache hit Ratio: 0,92
Cache hits: 109680186
Cache lookups: 119173819
I mean only 8% of that Logical I/O corresponded to physical I/O? It is just not possible.
3) Procedure of taking stats:
Now to retrieve these stats I snapshot the system 2 times. One before the query, one after the query.
But: this is not done in a single session. In total 3 sessions are created. One session two retrieve the stats before the query, one session to run the query, a last session to snapshot after the query.
Could the problem, assuming there is one, be related to this:
"The V$SESSTAT view contains statistics on a per-session basis and is only valid for the session currently connected. When a session disconnects all statistics for the session are updated in V$SYSSTAT. The values for the statistics are cleared until the next session uses them."
What does this paragraph mean. Does it mean that the v$sysstat only shows you the stats of the last session that closed? Or does it mean thtat v$sysstat is increamented with the statistics of each v$sessionstat once a session terminates? If so, then my procedure for gathering those stats should be correct.
Can anyone help me sort out the origin of such a high cache hit ratio, with so much I/O being done?

sono99 wrote:
Hi,s
first of, let me start by saying that there were many things in your post that you mentioned that I could no understand. 1. Because i am not an Oracle Expert, i use whatever RDBMS whenever i need to. 2. Because another problem has come up and, right now, i cannot inform myself to be able to comprehend it all.Well, could it be that you need to understand the database you are working on in order to comprehend it? That is why we strongly advise you to read the concepts manual first, you need to understand the architecture that Oracle uses, as well as the basic concepts of how oracle does locking and maintains read consistency. It does these different than other database engines, and some things become nonsense if looked at from the viewpoint of a single user.
>
quote:
It would be useful to see the execution plan jhust in case you have simplified the problem so much that a critical detail is missing.
First, the query code:
2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:>SQL> CREATE TABLE FAVFRIEND
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 2 NOLOGGING TABLESPACE TARGET
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 3 AS
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 4 SELECT ID as USRID, FAVF1 as FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 5 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 6 SELECT ID as USRID, FAVF2 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 7 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 8 SELECT ID as USRID, FAVF3 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 9 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 10 SELECT ID as USRID, FAVF4 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 11 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 12 SELECT ID as USRID, FAVF5 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 13 ;
Now, Althought it is clear from the query that the statement is executed with the NOLOGGiNG, i have disabled the logging entirely for the tablespace.There are certain rules about nologging that may not be obvious. Again, this derives from the basic Oracle architecture, and if you use the wrong definitions of things like logging, you will be led down the primrose path to confusion.
>
Futhermore, yes, the RDBMS is a test RDBMS... I have droped the database a few times... And I am constantly deleting an re-inserting data into the source database table named PROFILE.>
I also make sure do check all the datafile statistics, and for this query the amount of RedoLog, Undo "Log", Templife used is negligible, practically zero.Create table is DDL, which has implied commits before and afterwards. There is a lot going on, some of it dependent on the volume of data returned. The Oracle database writer writes things out when it feels like it, there are situations where it might just leave it in memory for a while. With nologging, Oracle may not care that you can't perform recovery if it is interrupted. So you might want to look into statspack or EM to tell you what is going on, the datafile statistics may not be all that informative for this case.
>
Most of the I/O is reading, a few of the I/O is writing.
My idea is not to optimize this query, it is to understand how it performs. Well, have you read the Concepts manual?
I have other implementations to test, namely I having trouble with one of them.
Furthermore, I doubt the query Plan Oracle is using actually involves tablescans (as I I'd like it to do); because in the Wait Events, most of the wait time for this query is spent doing "db file scattered read". And I think this is different from a tablescan.Please look up the definition of [db file scattered read|http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/instance_tune.htm#sthref703].
>
Do you really have to use sessions external to the query session ? Can you query v$mystat joined to v$statname from the session itself.
No, I don't want to that!
I avoid as much as possible having the code I execute being implemented in java. Why do you think java has anything to do with this? In your session, desc v$mystat and v$statname, these are views you can look at.
When i can avoid it I don't query the database directly through JDBC, i use the RDBMS command line client, which is supposed to be very robust. Er, is that sqlplus?
So yes, I only connect to the database with JDBC... in very last session.
Of course, I Could Have put both the gather stats before query and gathers stats after query a single script: the script that would be also runing the query.
But that would cause me a number of problems, namely some of the SQL i build has to be implemented dynamically. And I don't want to be replicating the snapshoting code into every query script I make. This way I have one sql with the snapshoting scripts; and multiple scripts for running each query. I avoid code replication in this manner.Instrumentation is a large subject; dynamic sql generation is something to be avoided if possible. Remember, Oracle is written with the idea that many people are going to be sharing code and the database, so it is optimized in that way. For SQL parsing in particular, if every SQL is different, you get a performance problem called "hard parsing." You can (and generally should, and sometimes can't avoid) use bind variables so that Oracle doesn't need to hard parse every SQL. In fact, this is one of those things that applies to other engines besides Oracle. I would recommend you read Tom Kyte's books, he explains what is going on in detail, including in some places the non-Oracle viewpoint.
>
Furthermore, Since the database is not a production database, it is there so I can do my tests. I don't have to be concerned with what other sessions may be doing to my system. There are only the sessions I control.No, there are sessions Oracle controls. If you are on unix, you can easily see this, but there are ways to see it on Windows, too. In some cases, your own sessions can affect themselves.
>
then what it the array fetch size ? If the array fetch size is large enough the number of block visits would be similar to the number of physical block reads.
I don't know what the arraysize you mention is. i have not touched that parameter. So whatever it is, it's the default.You should find out! You can go to http://tahiti.oracle.com and type array fetch size into the search box. You can also go to http://asktom.oracle.com and do the same thing, with some more interesting detail.
>
By the way, I don't get the query results into my client, the query results are dumped into a target output table.
So, if the arraysize has something to do with the number of rows that Oracle is returning the client in each step... I think it doesn't matter.You may hear this phrase a lot:
"It depends."
>
As for the query plan, If i am not mistaken you can't get get query plans for queries that are: create table as select.What?
JG@TTST> explain plan for create table jjj as select * from product_master;
Explained.
JG@TTST> select count(*) from plan_table;
COUNT(*)
         3
I can however commit the create table part and just call for the evalution of the Select part of the query; i believe it should be same.
"Optimizer"     "Cost"     "Cardinality"     "Bytes"     "Partition Start"     "Partition Stop"     "Partition Id"     "ACCESS PREDICATES"     "FILTER PREDICATES"
"SELECT STATEMENT"     "ALL_ROWS"     "2563"     "586110"     "15238860"     ""     ""     ""     ""     ""
"UNION-ALL"     ""     ""     ""     ""     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "512"     "117222"     "3047772"     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "513"     "117222"     "3047772"     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "513"     "117222"     "3047772"     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "513"     "117222"     "3047772"     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "513"     "117222"     "3047772"     ""     ""     ""     ""     ""
This query plan was taken from sql developer, exported to txt, and the PROFILE table here has only 100k tuples.
Right now I am more concerned with testing the MODEL query. Which Oracle doesn't seem to be able any more... but that is a matter for another thread.
Regarding this plan. The Union ALL seems to be more than just a binary Operator... IT seems to be Neray.
The union all on that execution plan seems to be taking as leaf tables 5 99sono.Profile tables, and be making a table scan to them all. So I'd say that the RDBMS should only scan each database block once and not 5 times.
But: It doesn't seem to be so. IT seems like what oracle is doing is scanning completly each the table, and then moving on to next select statement in the UNION ALL. Because given the amount of source table that was read, 5 times greater than the size of the source table. Oracle didn't reuse read blocks.
But this is just my feeling.Your feeling is uninteresting. Telling us what you really hope to accomplish might be more interesting.
Anyway, in terms of consistent gets, how many consistent gets should the RDBMS be doing? 5
One for each table block?It depends.
>
My best regards,
Nuno (99sono xp).

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

Having Problems With The Neo2 ? Read This!!!!

Hi,
i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
Well, having probs with you're NEO2 ??
remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
Regards,
Welcome to the real world NEO :D

Ok.....
i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
Whatever i do, i can't make the mobo crash in anything but games!
Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-10-04 02:02:53
TimeZone: -60 - West-Europa (standaardtijd)
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 9
Shutdown: 0
EaRecovery: 1
EventCount: 2
BreakCount: 2
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: RADEON 9700 PRO
HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6378
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2
I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
Regards,
The real world

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again. The server returned the error: Mail was unable to log in

I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailable

Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

Problems with the O2 blackberry data package on my Curve 3G.

I have already informed O2 about this but they claim that I should be used the blackberry support services, but nothing there helps me!
I got my Blackberry Curve 3G on September 9th this year and I put on the Blackberry Data Package bolt-on onto my phone on September 16th. I then received a text to say they've taken £5 from my credit and it will be up and running in the next 24 hours. Its now September 19th and my BBM is not working at all and I am extremely upset with the services and behaviour I have received from both O2 and Blackberry.
Is there any way you can help? If this fails, I shall be forced to go back to the shop from where I got my Blackberry from and ask for their help.
Many thanks, Jade.

Can a bubble whistle Problems with the O2 blackberry data package on my Curve 3G.? The seat matures in your oar. The lad ices the pursuing method inside a resident. A judge spins against the vendor! The rose wows the hello.
filipina heart

Many problems with the 'Export to Text' (.txt) in CR Xi

Hi,
I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
- Multi-columns layout do not export as Multi-column (export only a one column);
- Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
- Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
- Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
- 'Keep Group Together' flag is not working.
- 'Reset Page Number After' simply does not works when exported to text;
- 'Keep object together' on TextBox/Section is not working.
- Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
If still supported, when will these bugs be fixed???
Thanks

Hi Rene
Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
Regards
Sourashree

When going to update it says there is a billing problem with the previous purchase, I went in to fix it but it won't let me download it. How do I fix this problem?

When going to update it says there is a billing problem with the previous purchase when I go to update it still won't let me download and all the info is correct. How do I fix this?

You have to email iTunes Store Support about this issue now. You can get started here. Change the country in the upper right if necessary.
https://ssl.apple.com/emea/support/itunes/contact.html

Problems with the Actionscript parser

Similar Messages

Maybe you are looking for