Problems with the ADF runtime installer 10.1.3.3 on OAS 10.1.3
hi, all,
I have successfully installed an oracle application server on a linux machine and in order for ADF BC application to run on it i have to install the adf runtime libraries.
What i did is the following:
-I shut down the opmn of the server
-I installed the libraries using the jdev utility
-when i try to start the server again the OC4J process does not start and gives the following error.
07/11/22 11:44:09 Start process
07/11/22 11:44:15 Error initializing server: Shared library "apache.commons.logging" could not be found.
07/11/22 11:44:15 Fatal error: server exiting
Any help on this issue? I am not about to install the ADF runtime through the JDeveloper as the OAS is on a linux machine and I am developing on a PC.
Regards,
Thomas.
Run Time Libraries Cause problem on oracle application server
Similar Messages
-
Is there a problem with the Itunes Windows Installer Programme?
The reason I ask is because I had a perfectly working Itunes programme on my external hard drive, from which I then deleted all the double ups of songs I had and then could not gain auto. updates of the dsongs I wished to add to itunes.
It said to reinstall Itunes, which I tried to do and since this time the installation stops when installing the registry components and the following message appears -
There is a problem with the Windows Installer Package. A programme required for this to install could not be run. Comntact your support personall or package provider.
Can anyone help please?
Thank you in advance for any help forwarded
MrG
P.S. - Not that well versed in computer speak, so laymans terms welcomed.This message often relates to a problem with Apple software update.
Go to Add remove programs and find Apple Software update. Try repairing it.
Select Change>>repair.
That probably will not work
Then try uninstalling any instance you find of Apple Software update. That probably will not work either.
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
http://support.microsoft.com/kb/290301/
To run the program – All Programs>>Windows Install Cleanup
Remove any instance you find of Apple software update with the cleanup utility.
Download a fresh copy of the iTunes installer and save it on your desktop.
http://www.apple.com/itunes/download/
Restart your computer and try installing iTunes. -
Satellite Pro A120: I have problems with the graphics driver installation for W2k
I have installed windows 2000 on an A120 the system is fully service packed and up to date before I even begin installing the required drivers I am unable to restart the system. Once I install the drivers as recommended I have problems with the graphics driver as it will not install because it requires a restart and then I am unable to install any new programs that require a restart as the driver has not installed correctly.
The laptop is a A120 Pro, 1 week old and came with XP home, because of this toshiba will not offer me support as I have changed the O/S even though they obviously support 2000 on this laptop as they supply the drivers.
Any ideas would be greatly appreciated.the reason the driver is not working is down to a problem with the windows 2000 not having the ability to reboot.
When you select restart the system appears to power down then stays switched on. Now if I try to install software I get an error saying that the system needs to complete a restart to finish the install of the driver.
The restart problem happens as soon as win2k is installed as although I have now shipped the laptop to the sales team I have another one which has just had a clean install of win2k without any drivers and the fault is present on this one.
I am thinking it could be to do with power management but I'm not to sure as I have never come across this as I normally purchase machines which accept just about any O/S. -
Problems with the OWB Runtime Audit Browser
I executed some mappings in my project
I go to the Client Browser Version of the OWB Runtime Audit Browser (before I Started OWB OC4J Instance).
I specified the Runtime Repository connection information and click in View
Deployment Report or View Execution Report, but, when I access to the Runtime Repository I dont see any data in the web page.
I probed with differents filters but I didnt see data!!!
What is the problem?Hi Mark,
Yes, I am sorry, I wanted to say 'I do not see any data' , but when I connect (using the access user credentials and the QA User role or any other role), and click 'view execution report' I do not see any data!!!! I dont have any data in the table (Only the name of the repository), I drill down to the details of the execution but I do not see any data!!!
In the Filter Options section are the mappings in a combobox (Execution Filter) but I do not see any data about its!!!
Besides, for example If I execute the query in SQL PLUS: select * from ALL_RT_AUDIT_MAP_RUN_ERRORS.
It has 581 rows
What happens?
Why I dont see any data?
Thanks! -
Fixing problems with the Microsoft Windows Installer Cleanup Utility
Sorry for the long subject. I am having what appear to be common problems with my acrobat reader for which the only solution appears to be using the microsoft windows installer cleanup thing.
I have acheived downloading the utility to my desktop but when I try to run it I get an error message as follows:
Across the top of the message it says 'WINDOWS SCRIPT HOST' and in the box it says:
Script: C:\DOCUMEN~1\Karen\LOCAL~1\Temp\IXP000.TMP\StartMsi.vbs
Line: 1
Char: 1
Error: The specified module could not be found
Code: 800700E
Source: (Null)
Does anyone have any clues as to where I can go from here as I am stuck with a program I can neither use or uninstall, and a reascue plan that doesn't want to cooperate either. And please treat me like a 2 yr old with the technical stuff. Thanks. :-)
KarenCan you try to download it again, perhaps to the C:\ drive rather than the Desktop? Delete the Desktop download, then open Windows Explorer, and run the installer from the C:\ drive.
P.S. do you have administrative privileges on your system? -
Problems with the ADF Tutorial for J2EE developers.
Hi guys.
I have completed the ADF tutorial for 4GL developers withhout any major hickups. Now I have been doing the ADF tutorial for J2EE developers (locate here http://www.oracle.com/technology/obe/adf_tutorial_1013/index.htm).
I ran into some problems around chapter 6 and after failing understanding the errors I loaded up the applicationscripts from the tutorial. However, I get an error from this script. I have tried to load up both end of chapter 5,6 and 7 and get the same error. So now I am at a total loss. So, I am turning to you. I have copied the entire error message below.
Unfortunately JDeveloper translates some keywords to Norwegian and I have tried to translate them back into english. Forgive me if its not 100% accurate but i think you will understand the keyword. I've translated these four keywords:
- Internal Exception
- I/O-exception
- Errorcode
- Exception
The error message:
2006-08-08 09:41:53.081 ERROR J2EE EJB8006 [SRPublicFacade:public oracle.srdemo.datamodel.Users oracle.srdemo.datamodel.SRPublicFacadeBean.findUserByEmail(java.lang.String)] exception occurred during method invocation: javax.ejb.EJBException: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: I/O-exception: The Network Adapter could not establish the connectionErrorcode: 17002; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: I/O-exception: The Network Adapter could not establish the connectionErrorcode: 17002
2006-08-08 09:41:53.111 WARNING JBO-29000: JBO-29000: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: I/O-exception: The Network Adapter could not establish the connectionErrorcode: 17002; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: I/O-exception: The Network Adapter could not establish the connectionErrorcode: 17002
2006-08-08 09:41:53.111 WARNING JBO-29000: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: I/O-exception: The Network Adapter could not establish the connectionErrorcode: 17002; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: I/O-exception: The Network Adapter could not establish the connectionErrorcode: 17002
2006-08-08 09:41:53.111 WARNING Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: I/O-exception: The Network Adapter could not establish the connectionErrorcode: 17002; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: I/O-exception: The Network Adapter could not establish the connectionErrorcode: 17002
2006-08-08 09:41:53.111 WARNING JBO-29000: JBO-29000: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: I/O-exception: The Network Adapter could not establish the connectionErrorcode: 17002; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: I/O-exception: The Network Adapter could not establish the connectionErrorcode: 17002
2006-08-08 09:41:53.111 WARNING JBO-29000: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: I/O-exception: The Network Adapter could not establish the connectionErrorcode: 17002; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: I/O-exception: The Network Adapter could not establish the connectionErrorcode: 17002
2006-08-08 09:41:53.111 WARNING Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: I/O-exception: The Network Adapter could not establish the connectionErrorcode: 17002; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: I/O-exception: The Network Adapter could not establish the connectionErrorcode: 17002
2006-08-08 09:41:53.111 WARNING JBO-29000: JBO-29000: javax.servlet.jsp.el.ELException: An error occurred while getting property "userId" from an instance of class oracle.srdemo.view.UserInfo
2006-08-08 09:41:53.111 WARNING JBO-29000: javax.servlet.jsp.el.ELException: An error occurred while getting property "userId" from an instance of class oracle.srdemo.view.UserInfo
Thanks for any help though.Hi,
I tried to follow the tutorial using a mysql database, everything was fine till I tried to run the application I`ve got this error. Please help me, I can't resolve this problem. I test the jdbc driver and it is ok, I can use it from a simple java class but I can not use it from the web project.
[TopLink - Información]: 2006.08.09 12:52:08.238--ServerSession(1209)--Thread(Thread[ApplicationServerThread-0,5,RequestThreadGroup])--TopLink, versión: Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)
[TopLink - Configuración]: 2006.08.09 12:52:08.254--ServerSession(1209)--Connection(1210)--Thread(Thread[ApplicationServerThread-0,5,RequestThreadGroup])--conectando (DatabaseLogin(
plataforma=>MySQL4Platform
nombre de usuario=> "saep"
URL de origen de datos=> "jdbc:mysql://localhost/saep"
[TopLink - Grave]: 2006.08.09 12:52:09.254--ServerSession(1209)--Thread(Thread[ApplicationServerThread-0,5,RequestThreadGroup])--Pila de Excepciones Locales:
Excepción [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Excepción Interna: java.sql.SQLException: No suitable driverCódigo de Error: 0
at oracle.toplink.exceptions.TopLinkException.<init>(TopLinkException.java:46)
at oracle.toplink.exceptions.DatabaseException.<init>(DatabaseException.java:51)
at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:276)
at oracle.toplink.sessions.DefaultConnector.connect(DefaultConnector.java:64)
at oracle.toplink.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:147)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:197)
at oracle.toplink.internal.databaseaccess.DatabaseAccessor.connect(DatabaseAccessor.java:221)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:273)
at oracle.toplink.threetier.ConnectionPool.buildConnection(ConnectionPool.java:81)
at oracle.toplink.threetier.ConnectionPool.startUp(ConnectionPool.java:304)
at oracle.toplink.threetier.ServerSession.connect(ServerSession.java:431)
at oracle.toplink.publicinterface.DatabaseSession.login(DatabaseSession.java:511)
at oracle.toplink.tools.sessionmanagement.SessionManager.getSession(SessionManager.java:317)
at oracle.toplink.tools.sessionmanagement.SessionManager.getSession(SessionManager.java:372)
at oracle.toplink.util.SessionFactory.getSharedSession(SessionFactory.java:103)
at oracle.toplink.util.SessionFactory.getSharedSession(SessionFactory.java:82)
at oracle.toplink.util.SessionFactory.acquireSession(SessionFactory.java:114)
at com.saep.negocio.SecretariaServiciosEJBBean.findAllAlumno(SecretariaServiciosEJBBean.java:81)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:55)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:86)
at SecretariaServiciosEJBLocal_StatelessSessionBeanWrapper0.findAllAlumno(SecretariaServiciosEJBLocal_StatelessSessionBeanWrapper0.java:69)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at oracle.adf.model.binding.DCInvokeMethod.invokeMethod(DCInvokeMethod.java:504)
at oracle.adf.model.binding.DCDataControl.invokeMethod(DCDataControl.java:1796)
at oracle.adf.model.generic.DCGenericDataControl.invokeMethod(DCGenericDataControl.java:248)
at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:216)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1287)
at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:1802)
at oracle.adf.model.generic.DCGenericDataControl.invokeOperation(DCGenericDataControl.java:266)
at oracle.adf.model.adapter.AdapterDCService.invokeOperation(AdapterDCService.java:318)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:625)
at oracle.jbo.uicli.binding.JUMethodIteratorDef$JUMethodIteratorBinding.invokeMethodAction(JUMethodIteratorDef.java:160)
at oracle.jbo.uicli.binding.JUMethodIteratorDef$JUMethodIteratorBinding.initSourceRSI(JUMethodIteratorDef.java:542)
at oracle.adf.model.binding.DCIteratorBinding.callInitSourceRSI(DCIteratorBinding.java:1420)
at oracle.adf.model.binding.DCIteratorBinding.getRowSetIterator(DCIteratorBinding.java:1403)
at oracle.adf.model.binding.DCIteratorBinding.setRangeSize(DCIteratorBinding.java:2641)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:2484)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2257)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:104)
at oracle.adf.controller.v2.lifecycle.Lifecycle$8.execute(Lifecycle.java:210)
at oracle.adf.controller.v2.lifecycle.Lifecycle.executePhase(Lifecycle.java:116)
at oracle.adf.controller.faces.lifecycle.ADFPhaseListener.mav$executePhase(ADFPhaseListener.java)
at oracle.adf.controller.faces.lifecycle.ADFPhaseListener$4.after(ADFPhaseListener.java:331)
at oracle.adf.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:97)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:211)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.sql.SQLException: No suitable driver
at java.sql.DriverManager.getConnection(DriverManager.java:545)
at java.sql.DriverManager.getConnection(DriverManager.java:140)
at oracle.toplink.sessions.DefaultConnector.connect(DefaultConnector.java:62)
... 77 more
2006-08-09 12:52:09.270 ERROR J2EE EJB8006 [SecretariaServiciosEJB:public java.util.List com.saep.negocio.SecretariaServiciosEJBBean.findAllAlumno()] exception occurred during method invocation: javax.ejb.EJBException: Excepción [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Excepción Interna: java.sql.SQLException: No suitable driverCódigo de Error: 0; nested exception is: Excepción [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Excepción Interna: java.sql.SQLException: No suitable driverCódigo de Error: 0
2006-08-09 12:52:10.770 WARNING rowIterator is null
2006-08-09 12:52:10.770 WARNING rowIterator is null -
A Problem with the SAP NetWeaver Installation
Hello Everybody,
I'm installing the sap netweaver application but I Have a problem after the definition of the 4 passwords.
After that step I Have a step named :" DVD/CD Browser > Software Package Check" And the SapInst ask me to enter the location of the "Migration Export" Package, But I didn't find it and I cannot go to the next step and continue the installation.
I Thank u all for your helps.
Enjoy.Check out these weblogs.........
/people/sugree.phatanapherom/blog/2005/08/17/a-visual-installation-guide-on-sneak-preview-sap-netweaver-04-abap-edition
/people/rich.heilman2/blog/2005/08/17/netweaver-sneak-preview--abap-stack-installation--my-experience -
Problems with the latest windows installer?
FMS *sigh* FML
I am trying to get live streaming running on my windows 7 machine (as full admin; permissions shouldn't be an issue)
- Windows install
- No serial/Development server version
- Yes Appache
- Admin, password...
- Default, default, default...ect, GO.
Out of box, nothing worked - localhost just laughed at me with a blank ("could not connect") page and the FMS admin page was no better "Login attempt to the server below failed...etc". Then I found that [root]/Apache2.2/conf/httpd.conf came straight from the installer like this
# Please see httpd.conf.orig for the configuration of a default
# (non-FMS) installation of apache.
Listen 8134
# If you plan to run FMS as root on linux, you _must_ specify a
# valid user, with access to the FMS installation direction, or
First off - Isn't that supposed to be set to 80? Also, httpd.conf had no definition for ServerRoot - I am no apache expert (that cannot be overstated) but everytime i've used it, i've needed to define this.
Anyway, I figured I had nothing to lose and so armed with essentially my mom's working knowledge of Apache's .conf schema, I went in and changed "Listen 80" and added a definition for ServerRoot, reset and...tada...finally, localhost would resolve to that FMS startup page. But that doesn't mean much because I get a timeout/failure on the rtmp demo (sure the http demo works but who cares; ignf about http). But that makes sense because the FMS admin page STILL can't connect to localhost (or localhost:1111 for that matter) so there was no server instance to connect to anyway...[Jason slumps; a broken man].
Anyway - anyone have any insight? Same problems += soultion?Hi,
Thank you for trying FMS.
Though you mentioned you have the admin access on your windows 7 machine, I still doubt the admin privileges are the cause of the problem for you. Let's take your issues one by one.
After the FMS installation, the installer gives options to start the service automatically (few check boxes to select). But on Windows 7, that wont work straight away even though you are logged in as admin. What you need to do is to open a command prompt (with run as administrator). So, your command prompt is actually elevated with admin stuff. Now try to start the fms services as below :
c:\> net start fms
c:\> net start fmsadmin
Once you get the successful messages, try to make connections, it should work.
Next, the apache that comes along with FMS runs/listens on 8134 itself. Port 80 is taken over by the FMS processes (to be exact, the FMSEdge process) which will redirect all HTTP traffic to Apache on 8134 and all the RTMP traffic to itself (to be exact, to FMSCore process) and hence you can keep the 8134 intact.
Once your services start correctly, there wont be any port conflict/problems.
Please try and let us know if that helps.
Thank you ! -
Problem with the clientinstallation runtime and merge module
I'm using CR XI SP4 and as a data source I use a XML file that was defined
with a XSD.
From my application I generate a XML file and start CR through a Delphi
component.
As a parameter I supply a RPT file without data.
That's all working.
Now I want to start my application on a client. Therefore I have created a
MSI file from the 4 Merge files of SP4 and run the installation on the
client.
Used merging modules of SP4 :
1. CrystalReports11_5_RDC_Designtime.msm
2. CrystalReports11_5_RDC_License.msm
3. CrystalReports11_5_RDC_Reportengine.msm
4. CrystalReports11_5_RDC_Runtime.msm
Then the program crashes with a Windows error.
If I save the Data in the report it works. The data ist not up to date then.
If I install a complete CR XI it works, even when there is no data in the
report.
The data ist diplayed correctly.
What am I doing wrong?
What do I have to install on the client to make it work?
Thanks in advance for your quick help.
Greetings Martin WeißenbornHello Martin,
Please post this query to the [.NET Development - Crystal Reports|SAP Crystal Reports, version for Visual Studio; forum:
That forum is monitored by qualified technicians and you will get a faster response there.
Also, all Crystal Reports .NET Development queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk -
Is anyone having any problems with the ML Xcode installation crashing your computer?
I have tried to install the new Xcode in the AppStore for ML and once it gets to the "installing" part, my computer completely crashes instantly. This is the error I was presented with when I got back into OS X:
Your computer was restarted because of a problem
Interval Since Last Panic Report: 1349 sec
Panics Since Last Report: 3
Anonymous UUID: D15D8585-7FF2-6F6E-F636-ADC39FD0D6BF
Thu Nov 8 15:55:34 2012
panic(cpu 7 caller 0xffffff8027b1ddfa): "fsevents: copy_out_kfse: asked to copy out an invalid event (kfse 0xffffff80df7f4380, refcount 0 fref ptr 0xdeadbeef)\n"@/SourceCache/xnu/xnu-2050.18.24/bsd/vfs/vfs_fsevents.c:1267
Backtrace (CPU 7), Frame : Return Address
0xffffff80defe3b10 : 0xffffff8027a1d626
0xffffff80defe3b80 : 0xffffff8027b1ddfa
0xffffff80defe3de0 : 0xffffff8027b1d493
0xffffff80defe3e60 : 0xffffff8027d76abe
0xffffff80defe3f00 : 0xffffff8027d768e2
0xffffff80defe3f60 : 0xffffff8027de1533
0xffffff80defe3fb0 : 0xffffff8027acea1d
BSD process name corresponding to current thread: SmartwareServerA
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000027800000
Kernel text base: 0xffffff8027a00000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 5695620123152
last loaded kext at 4171716596146: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7fa9e31000, size 229376)
last unloaded kext at 1454483445663: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7fa9e2e000, size 12288)
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 4.2.4
org.virtualbox.kext.VBoxNetFlt 4.2.4
org.virtualbox.kext.VBoxUSB 4.2.4
org.virtualbox.kext.VBoxDrv 4.2.4
com.logmein.hamachi 1.0
com.Cycling74.driver.Soundflower 1.5.2
com.apple.filesystems.smbfs 1.8
com.apple.filesystems.exfat 1.3
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.ntfs 3.10
com.apple.driver.AGPM 100.12.69
com.apple.filesystems.autofs 3.0
com.apple.driver.IOBluetoothSCOAudioDriver 4.0.9f33
com.apple.driver.IOBluetoothA2DPAudioDriver 4.0.9f33
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.1f2
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.AMDRadeonAccelerator 1.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.2.11
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAcceleratorFamily 19.0.26
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.kext.AMD6000Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 6 GB, SMC 1.69f3
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353237334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS727550A9E362, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 6
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
Anyone have an idea?I am having an issue with what appears to be the same thing, though I don't believe I have any of those apps you listed. Could you please provide me with assitance?
Wed Mar 6 22:32:40 2013
panic(cpu 1 caller 0xffffff802d2ac90b): Releasing non-exclusive RW lock without a reader refcount!
Backtrace (CPU 1), Frame : Return Address
0xffffff80ac893950 : 0xffffff802d21d626
0xffffff80ac8939c0 : 0xffffff802d2ac90b
0xffffff80ac8939e0 : 0xffffff802d31c09c
0xffffff80ac893c10 : 0xffffff802d310e92
0xffffff80ac893c40 : 0xffffff802d2ff375
0xffffff80ac893f50 : 0xffffff802d5e182a
0xffffff80ac893fb0 : 0xffffff802d2ced33
BSD process name corresponding to current thread: installd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000002d000000
Kernel text base: 0xffffff802d200000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 7656038126330
last loaded kext at 456528520033: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7faedc7000, size 229376)
last unloaded kext at 202119881046: com.apple.driver.AppleUSBUHCI 5.2.5 (addr 0xffffff7fadb40000, size 65536)
loaded kexts:
com.apple.filesystems.smbfs 1.8
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleIRController 320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0 -
Problem with SAPSERVER.CMD during installation, nothing happens
In the process of installing in our test environment but I seem to have problems with the Oracle 9i installation. When i double click the file sapserver.cmd nothing happens.
I have tried the workaround with renaming "symcjit.dll" and changing parameter JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m in oraparam.ini file. Then rerun installation with command "install\win32\setup.exe -J-Dsun.java2d.noddraw=true".
This time error message "<i>Could not initialize the Java virtual machine. Program will exit!</i>" occurred.
Can anyone please help me how to fix the problem. Thanks.I am also facing same problem--
I have got IDES 4.7 CDs..
I am trying to install Oracle RDBMS 9.2 NT thru first CD... when I am running SAPSERVER.CMD it does nothing except showing wait pointer for few seconds.
it is actually creating three folders in TEMP folder images, jre, oui
I have tried running SAPSERVER.CMD from command prompt also but there was no luck.
When I tried to run SETUP.EXE there was same situation.
Even i tried to run setup.exe from \NT\I386 directory on command prompt with following command ...
SETUP.EXE -RESPONSEFILE E:\NT\I386\response\sapserver.rsp
but nothing could help me out...
I checked everywhere but could not find and LOG file which could explain me that what went wrong..
this is an appeal to all are techies.. plz help me..
I have tried it on two machines:
1) p4 2.66 512 ram 80+40 gb HDD 2000 server with sp4 and ie6, JRE, .NET framework 2.0
2) Dual core with 1 gb RAM 300 GB HDD 2003 Server with SP2 JRE, .NET framework 2.0
There was exactly same situation on both the machines..
Thank in advance -
Bug: ADF runtime installer fails in 9.0.5.2
Hi
Im trying to install ADF libraries to 10g Application Server using the ADF runtime installer of JDeveloper 9.0.5.2. Unfortunately the installer fails while trying to archive some of the old files. The error message is:
"Can't Archived O:\oracle\OraHome10g\BC4J\lib\adfm.jar to O:\oracle\OraHome10g\BC4JAR.9.0.4.13.79\\BC4J\lib\adfm.jar".
This is not surprising: Note the double slash at "...\\BC4J...".
Seems to be a bug.Before launching ADF runtime installer you have to stop all OC4J instances and stop the service for enterprise manager.
In this way I correct that error. -
Numerous problems with the Adobe AIR runtime for Android
I created a app on the platform Adobe AIR for Android, which requires for AIR. The app is very popular in the Android Market, but many users complain of problems with the installation of Adobe Air runtime.
For example these phones users: LGE LG-P698, LG Pecan, HTC Wildfire. But judging by the fact that users have access to the installation of Air, their phones are compatible with it.
Tell me how do I solve the problem?
In addition, I have a few questions:
1. Decides whether the problem of export application with embedded AIR runtime?
2. I build my apps with the help of ADT. How in this case to make embeding AIR runtime?
3. Is it possible to prompt the user to download and install older versions of AIR? Where to find its?
I hope to help, because the problem is global.Hi Astraport,
I think you should embed the air runtime in your application,
Some time ago I've written a step by step guide, have a look at this post:
http://forums.adobe.com/message/3961579#3961579
I hope it helps -
I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?
The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.) -
iTunes won't upgrade to10.5. I'm on 10.1.17.
When installing 10.5 it terminates with an error message "There is a problem with the Windows installer package. Contact the package vendor".
It does not provide an error code or details/description to further troubleshoot. As a result I can't upgrade my Apple devices to leverage the cloud.
Any smarts out there who could help?
Using PC Win-7 w/IE 7 (should that matter)
Thanks muchI know there's a million threads like this, but I thought I'd record my experience. I, too, was having the original poster's error when I tried to update iTunes on Windows XP. I think I was stuck on 10.
I solved it by un-installing iTunes and every other Apple app. I discovered that Apple Software Update would not un-install as its MSI file could not be found. I used the "Windows Install Cleanup" tool from Microsoft to remove Apple Software Update from the list of installed programs. Google "kb290301" for a Microsoft page that includes a download link for it. After that, I was able to install a fresh copy of iTunes 10.5.2.
I'm not sure why this app's folder and MSI were missing from my computer. I had once used Laplink PC Mover to move everything from my old computer to this one, and perhaps it missed a bit.
Maybe you are looking for
-
Ownership/Group/Permissions What is the proper setting for free access?
When we first get a customer supplied disk, it is copied to our G5. It looks like whomever is logged into the G5 and copies the disk becomes the owner of that folder and their permissions are applied to the enclosed copied files. We never know who wi
-
Can't get rid of speaker image!
Hi, My iPhone 3Gs is basically a little broken anyways because I drop it sometimes but it has yet to cause too much damage. But when you turn it from silent to not theres a speaker image that comes in the middle of the screen, but when i recently tur
-
What is CC update Error Code 50?
I was attempting to update CC Desktop for Windows 7, but the update failed with Error Code: 50. Does anyone know what is this problem? CC Desktop is no longer functional and I need to recover. Any suggestions?
-
dear experts, I have same problem as described in thread CSALTER finished unsuccessfully in 11g My csscan output has two tables, one with 22 and other with 4 rows show lossy data. and csalter failed. What is reasonable approach to take care of this s
-
Best way for wireless guest authentication
Hi Can anyone tell me what a good way to authenticate guest wireless in my workplace, we currently use mac auth and usernames in the controller, which is not Cisco. What solutions are out there for this, ie something separate to the controller like a