Problems with the administration of users in BI 11G
HELLO EXPERTS
The problem presented is as follows, I am managing my BI users from weblogic, I have created groups and application roles, users, and roles were assigned roles and groups were assigned the income groups in each of the dash board that I have, but to create a new user and assign roles for which you have permission to pass I have to wait some time for the changes to take effect, I wonder if there is any more efficient way to manage users in the tool or else I'm doing wrong.
thank you very much
HELLO EXPERTS
The problem presented is as follows, I am managing my BI users from weblogic, I have created groups and application roles, users, and roles were assigned roles and groups were assigned the income groups in each of the dash board that I have, but to create a new user and assign roles for which you have permission to pass I have to wait some time for the changes to take effect, I wonder if there is any more efficient way to manage users in the tool or else I'm doing wrong.
thank you very much
Similar Messages
-
Problems with the imadmin purge user command
I am using iMS 5.2 hot fix 1.05, iDA1.2sp1 and iDS 5.1
When I try to use the imadmin purge user command I get the following errors:
[email protected]: purging user
[email protected]: purge user failed
Failed connection refused.
If I don't use the -g 0 option then it reports success, but the user account is still in LDAP...
I found a reference to the imadmin user purge command not working when you have iDA 1.2patch1 and iMS 5.1 patch 1 unless you make a change to your resource.properties file but i have tried the file both way and I get the same error with the purge user command.
I can use the imadmin delete user or imadmin modify user without any problem. I am just having trouble with the imadmin purge user command.
Any ideas?This problem is documented in bug id 4671472. I have attempted the recommeded fix, but the problem persists. If anyone else has been having a similar problem and has any solution let me know. Thanks.
Peter -
Problem with The Administration Server
Hi, I have the following problem....
sorry for my bad english....
on the server sun is installed "iplanet slapd-server" and all the users they are autenticatede whit it....
now i want to install SJES and i want to use this "iplanet slapd-server"....
when i run /usr/sbin/mpsadmserver configure:
oot@server:/shared/java_ent_sys_2005Q4/Solaris_sparc> /usr/sbin/mpsadmserver configure
Enter the fully qualified name of the computer
Fully Qualified Computer Name [server.dominio.com] {"<" goes back, "!"
exits}:
Server Root Information
Server Root: : /var/mps/serverroot
Choose the type of installation you prefer from the following choices:
Express - Installation option choices are made automatically. The easiest
installation and recommended for evaluating the product.
Typical - Software will be installed with the most common options. Recommended
for most deployments.
1. Express
2. Typical
What would you like to do [2] {"<" goes back, "!" exits}? 2
Choose the system user and group names under whose identity
the Sun Java(TM) System Server will run.
System User [root] {"<" goes back, "!" exits}:
System Group [other] {"<" goes back, "!" exits}:
Configuration Directory Server
Host [] {"<" goes back, "!" exits}: server
Port [] {"<" goes back, "!" exits}: 389
Configuration Directory Server Administrator
Administrator ID [admin] {"<" goes back, "!" exits}: cn=directory manager
Password:*******
Administration Domain
Administration Domain [dominio.com] {"<" goes back, "!" exits}:
The Administration Server runs on a different network port from other servers.
Specify the number of the port.
Administration Port [390] {"<" goes back, "!" exits}:
Installing Administration Server
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Checking connection to the Configuration Directory Server... failed.
The Admininistration Server cannot be configured.
:(.... where the error?
thanks....This is a typical error when the fully qualified hostname of the machine cannot be properly resolved.
Said differently, can a client on the network connect to the machine server.dominio.com ? Is this machine known in DNS ?
Regards,
Ludovic. -
I can't safe reboot if I choose my user account, no problem with the rest or user's accounts
Hi to all,
Since I've installed ML and also after 10.8.1 upgrade, my account is behaving very strangely.
It does seem to work, but every time I restart in my account, it takes ages and starts up app I've already closed (as if it was frozen when restarted), I get Toast 10, Disk Utility, App Store, Safari, Mail and Photoshop. Slowly, very slowly, in this order. I had improved, as I had some reboots with the Mountain Lion installer asking to instal Mac OS X!
Oddly enought, that first times Finder didn't show when I pressed Cmd-Tab for changing applications, it would show only if I clicked on the Desktop.
I did a clean install of ML and imported from Time Machine. I also did a "upgrade install", that is, over what I had (already ML).
I can't restart or close down unless I do it on the cold way, that is, pressing the power butto, as I can get no shutdown dialog, and if I choose from the Apple Menu, no matter what I choose, nothing seems to happen. Same when I choose "About this Mac", nothing happens, I have to manually open System Profiler.
But, in contrast, I can open from the Apple Menu App Store with no problems, for example.
Now I reboot and shutdown my Mac thanks to the Terminal!
Another "minor" inconvenient is that my Mail Rules weren't imported, and I don't know how to pass them to the new Mail, so all my Mail lies there in the "Inbox" unclassificated
If I go to a different user, then everything works apparently. So it must be something I have added, but it can be something installed many System versions before, so I have no idea on how to track it down, although I've deleted many old applications and preferences, including some problematic Fonts, Perian, etc.
I tried safe boot, but when I enter in my user, screen turns light gray and it doesn't start anything, so I have to force a cold shutdown again with the power button and restart again.
Safe boot with a different account has no problem again.
Sorry for the looong explanation, but, although I can work in my user, I'm worried as my work slows down a lot.
Thanks in advance to any help you can give me!Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!! -
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
JohnI have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John -
Charm: BP problem with the user
Hi!
I have problem with the user for the usage of ChaRM.
When I try to set the the (urgent) correction in Development i get the following error.
There is no valid business partner assigned to your user.
Meanwhile the appropriate BP-entry for the user exists:
External BP number: <SID> <CLNT> <user name>
Identification number: <SID> <installation number> <user name>
Furthermore I have the following error, when I try to approve the change request:
Partner 141 (Change-Manager) is neither an employee nor an organizational unit
I would be great to get some help here.
Thank you
regards
ThomHi Thomm,
1. There is no valid business partner assigned to your user.
In BP under identification tab,
ID type idenification number
CRM001 <SID> <installation number><CLNT><username>
2.Partner 141 (Change-Manager) is neither an employee nor an organizational unit
Assign the BP role as "Employee" for Change Manager
regards
Naveen -
Hi; Attempting to upgrade to version 10.5.x, but I keep on getting an error - "There is a problem with the Windows Installer Package". I'm installing as Administrator, and have done an uninstall of the earlier version. Any ideas??
Needing to upgrade to allow connection of a 4S iPhone to the Laptop.
Thanks!! - Tim.Repair your Apple Software Update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you can't find ASU in all program, you can do it in CONTROL PANEL, ADD N REMOVE PROGRAMS. -
Are there any other left eye dominant (or left handed) iPhone users that experience problems with the touch screen keyboard selecting the letter next to the one you'd intended..?
It's either hand right or left.
I have the same issue myself. Not sure if it's b/c my fingers are too big or if I'm really missed the letter on the keyboard. -
Is someone with iMac 2010 users have problems with the monitor. I mean horizontal stripes and dark screen ?
Mine's a late '09, but there have been display issues with iMacs.
Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. -
When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the upgrade which is affecting the transfer? Is there a way of resolving this?
When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be. -
Problems with the Layout Priority in KM
Hello, I have some problems with the Layout Priority in KM..
I'm using a KM Navigation Iview with "<i>Layout Set</i>"=NewsBrowser (this Layout Set uses a Collection renderer that sorts the folder's contents by "last modified") and "<i>Layout Set Mode</i>"=exclusive.
In the KM folder I setted in <i>Details->Settings->Presentation</i> as "<u>rndSortProperty</u>"=name because I need to order my files by FileName property.
Despite that in see that the contents showed in my iview are ordered by Last Modified...
The "<i>Layout Set Mode</i>" exclusive gives the higher priority to the Folder Settings..
I don't understand..
Thank you in advance.Thank you Shyja,
your post was helpful, but another issue is occurred.
Maybe en example could be useful..
My scenario:
- I need to show a km folder with layout set "<i>ConsumerExplorer</i>" on root folder (no "property of sorting" setted on its collection renderer) and "<i>TabExplorer</i>" (no "property of sorting" setted on its collection renderer).
- I need to sort files and folders by "last modified". By default seems that they are sorted by "name".
- With my administrator user I open my folder details (in Content Admin->KM Content is used the Layout "<i>AdminExplorer</i>"), and in "Settings->Presentation->Additional Parameters" I add two parameters "<i>rndSortOrder</i>=descending" and "<i>rndSortProperty</i>=modified" (the others are parameters of AdminExplorer Layout).
- Then I check "Apply Settings to All Subfolders" and "Use Settings for All iViews (Preferred Presentation)".
result:
I see the "<i>ConsumerExplorer</i>" on root folder, the subfolder are sorted by "last modified" (everything ok).
I click on a subfolder, the "TabExplorer" si showed, the Tabs and the content are sorted by "last modified" BUT..
.. into the tabs are showed <u>nameFolders</u> (in link style), <u>the action command</u>, and the properties of "<u>author</u>" and "<u>last modified</u>" (normally into the tabs are showed just the folderNames in text style)...
Why?? Is possible that the "AdminExplorer" parameters of the km folder affect the Tab component??
Thank you -
I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. -
What is the problem with the newest version of iTunes (Failed to install - error 7
What is the problem with the newest version of iTunes (Failed to install - error 7 & missing MSVCR80.dll) - the DLL is not missing. tgried to install today and it failed - what a waste.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall go to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Maybe you are looking for
-
Dear All, This is REM scenario, Client is going scheduling agreements material master Settings MRP Type - P1 Planning time fence - 10 Lot Size - PK Procurement type - F GR Processing time - 2 days, No plad delevery time maintained. in planning calend
-
Disk Utility can't repair or verify?
Hi, my 12 G4 powerbook is running fine except the fan is on nearly all the time. I thought I'd try to repair (or verify) disk permissions to see if that might possible help. But every time I run it on the HD, it just spins for maybe 10 min then gives
-
HT3430 Can't open a Keynote 09 presentation in Keynote 08
Keynote 09 does not have a "Save As" option so there doesn't seem to be a way to open a Keynote 09 presentation on Keynote 08.
-
I have Acrobat 9. Stopped working. So I uninstalled and tried to reinstall. Will not let me. Help!!
-
Is it possible to transfer a movie to iPhone which is already downloaded in iTunes?
I've downloaded a movie in iTunes on my PC. I synced it with my iPhone and the movie was not transfered. Any ideas to get that movie on my iPhone through iTunes?