Problems with the BIOS clock

Hey,
I`ve just purchased the MSI 875P mainboard. The board is running smoothly with bios version 1.4, but there is this small and anoying problem; The bios clock will not work. I set the time and date in the bios and when I go back in five minutes later the time and date are exactly the same.
Anyone else have this problem and is there a sollution for this?
Dacourt
Raidmax case
P4 2,6HT 800 mhz fsb
MSI 875P Neo-FIS2R
Geil 512 DDR ram 400 mhz
Creative Riva TNT2 which will be replaced with the  Sapphire Radeon 9700 on monday
Samsung syncmaster 172t LCD

Thanks for your quick response.
Quote
Originally posted by wonkanoby
is cmos jumper on keep and whats vbat showing in pc health
Should`nt the jumper be on keep by default?
vbat(is that the same as battery in the pc health menuP): 2.96
Dacourt

Similar Messages

  • MOVED: Big problem with the bios

    This topic has been moved to BIOS.
    Big problem with the bios

    You're not alone... https://discussions.apple.com/thread/3391947?tstart=0

  • K8N Neo2: Another problem with the BIOS 1.9

    I flashed my K8N Neo2 with the BIOS 1.9, I lost the MAC address of the NVIDIA NIC. I fixed the problem reflashing the BIOS with the /nvmac:XXXXXXXXXXXX /wb options. Loaded the default settings and set the boot priority, the new BIOS is unable to boot from my Adaptec 19160 SCSI controller: it try always to boot to the NVIDIA NIC. It seems that the NVIDIA NIC has a higher boot priority than other external boot devices and it's impossible to change it.
    The settings are:
    First boot divice: Floppy
    Secind boot device: Hard-Disk
    Third boot device: CD-Rom
    Hard disk boot priority:
    1. Adaptec SCSI
    2. NV RAID
    3. Other boot device
    I reflashed the BIOS with the old 1.8 and now the system works well ...
    Thank you for the attention

    See Thread this index called  "Neo2 bios flash to 1.9 = dead nvidia lan" 

  • X100e problems with the BIOS update

    Hello, this is my first message and my english is not so good.
    I have a problem on my X100e to make a BIOS update.
    I download the newest update from Lenovo and burn a CD.
    At next i boot from this CD with the X100e and the update starts.
    But after a few second comes the message the file is damage.
    So i try this with different update versions, but it is still the same result.
    My BIOS version now is 1.04
    What is my mistake?
    Best wishes
    deti330

    Thanks for your quick response.
    Quote
    Originally posted by wonkanoby
    is cmos jumper on keep and whats vbat showing in pc health
    Should`nt the jumper be on keep by default?
    vbat(is that the same as battery in the pc health menuP): 2.96
    Dacourt

  • Problems with the internal clock

    Hello,
    I need to read samples with approximately constante time difference.
    I found the example ContAcq-IntClk.c and changed it a little bit and it seems that it work.
    But when I use a DAQmx_Val_FiniteSamps with a given count of reads than the last two values will be read to the same time!
    DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
    DAQmxErrChk (DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0","",DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,NULL));
    DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"",1,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps ,4));
    DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent(taskHandle,DAQmx_Val_Acquired_Into_Buffer,1,0,EveryNCallback,NULL));
    DAQmxErrChk (DAQmxRegisterDoneEvent(taskHandle,0,DoneCallback,NULL));
    E.g. the third and fourth value are read to the same time when I print also the current time in the callback function.
    Is this a bug?
    Regards
    Pellaeon

    Sorry,
    here my results...
    Nikolai
    Attachments:
    Testpanel.jpg ‏49 KB
    NSamples.jpg ‏62 KB

  • MOVED: Diamond Plus - problems with the windows clock anyone?

    This topic has been moved to AMD64 nVidia Based board.
    https://forum-en.msi.com/index.php?topic=94558.0

    By default Windows will Sychronise the clock once e week.
    Windows might think that you are in a different timezone.....
    If it was CMOS related, the clock would be set back a few years after each time the power gets cut of.

  • I need your help with the Bios password!

    Hi,
    I'm using a satellite l305D-S5895 and i have a problem with the bios password.  I was setting a password in the Bios or CMOS ( i don't know exactly).  Every time i start up my computer, a blue box appears and ask me for the password. I know the password but  I think it complicated and i want to take it off, and clear it.  Please help me with that.  If you guys have a way by turn of the battery or push the reset key inside the laptop, please give me some pictures to show that.  Thanks a lot.

    This does not sound like a Toshiba Bios password. The Toshiba passwords come on a black screen with white writing and say "Password =". Toshiba Service Centers have the tools needed to remove the password. provided that you can prove the computer is yours. So bring a proof of purchase and be prepared to pay, because password removal is not covered under warranty.

  • Problem with the clock widget

    Hi,
       I would like to know if someone have a problem with the clock widget after doing the update system to Mac OS X Mavericks (v.10.9), cause the appearance of my clock was like this (attached image). Pay attention for the position of hands of the clock (watch hands): Don't have something strange?
      Anyone know how to fix this problem?
    Thanks in advance.

    Hi, I have the same problem, I have done a fresh install of OS X and still did not fix the clock ... For when a new update?
    Thanks

  • Having Problems With The Neo2 ? Read This!!!!

    Hi,
    i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
    In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
    But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
    I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
    I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
    Well, having probs with you're NEO2 ??
    remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
    First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
    Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
    Regards,
    Welcome to the real world NEO :D

    Ok.....
    i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
    Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
    Whatever i do, i can't make the mobo crash in anything but games!
    Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
    // Watchdog Event Log File
    LogType: Watchdog
    Created: 2003-10-04 02:02:53
    TimeZone: -60 - West-Europa (standaardtijd)
    WindowsVersion: XP
    EventType: 0xEA - Thread Stuck in Device Driver
    // The driver for the display device got stuck in an infinite loop. This
    // usually indicates a problem with the device itself or with the device
    // driver programming the hardware incorrectly. Please check with your
    // display device vendor for any driver updates.
    ShutdownCount: 9
    Shutdown: 0
    EaRecovery: 1
    EventCount: 2
    BreakCount: 2
    BugcheckTriggered: 1
    DebuggerNotPresent: 1
    DriverName: ati2dvag
    EventFlag: 1
    DeviceClass: Display
    DeviceDescription: RADEON 9700 PRO
    HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
    Manufacturer: ATI Technologies Inc.
    DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
    DriverCompanyName: ATI Technologies Inc.
    DriverFileDescription: ATI Radeon WindowsNT Display Driver
    DriverFileVersion: 6.14.10.6378
    DriverInternalName: ati2dvag.dll
    DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
    DriverOriginalFilename: ati2dvag.dll
    DriverProductName: ATI Radeon Family
    DriverProductVersion: 5.2.3790.2
    I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
    Regards,
    The real world

  • Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

    HP Pavillion DV7 notebook PC
    Windows 7 64
    intel I5
    6 gig memory
    service pack 1
    I am trying to identify a problem with my HP Pavillion dv7 laptop
    Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
    I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
    I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
    any help would be great this PC has a lot of info on it and I dont think it is a lost cause
    thanks

    Hi duddy, sorry to hear that you are having issues with your computer over heating.  I have found a document that will assist you with Restoring the BIOS.  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
    I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue.    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
    If you are still having issues, please let me know and I will be happy to offer more assistance..
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • 'A problem with the cooling system' error message on Satellite A660

    Hi all,
    Hope I can get some help here. I've had about 5 HP laptops after all of them had problems and faults. I got sick of them and therefore got a refund and bought a high spec A660-1FH.
    The A660 has been a great laptop for two days until yesterday when I started getting a warning message saying 'A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service'.
    The cpu fan works fine as you can here it spinning and the temperature of the i5-460m processor is around 40 degrees for both cores - which seems normal to me. I've noted that it happens only when running on battery and if you switch from eco utility to power saver mode. Its fine when running on the 'balanced' power setting. The fan is louder before when this message appears.
    As its under 28 days my retailer swapped it for a brand new one straight away. Got the new one home, and the same message appears again. Has anyone else experienced this. As two laptops have had this, I'm wondering if this is normal for the A660 series laptop or if there is really a hardware issue?!
    I have tried to upgrade eco utility and the bios of the laptop but both are the latest versions. Can anyone help or share if they experience a similar issue with their laptop?
    Thanks

    In front of me I have Satellite A660-13Q (PSAW3E) and I have it about 6 weeks now. It runs almost 10 hours daily and until now I didnt notice such message or anything else that can be suspect for hardware functionality.
    I really dont know why this happen on your notebook and dont think there is anything you can do about it.
    I would exchange it again. What you can also try is to contact nearest Toshiba service. Make a call, explain the situation and ask if they can help you with this.

  • [TV@Master] problem with the remote MS 8606

    My remote was working fine with the MSIPVR WinDVR ver 2 and drivers 2.65.1.79 that came with the card. But it had problem with the reception and channel sorting so i downloaded the new drivers ver 4.102.1.8 and MSIPVR ver 3 for Ms 8606 from the msi website. The reception has greatly improved but the remote has stoped working.I replaced the batteries but it still doesn't work.

    is the WinCinema Manager program running? (look in notification area of taskbar - by clock)

  • Satellite A300-202 - problems with the AC power

    Hi,
    I bought a Satellite A300-202 a couple of months ago and I'm having intermittent problems with the AC power.
    Sometimes I plug the AC power and it won't start charging (the indicator leds are off and windows says it is on battery). Other times it is charging and suddenly stops.
    I suspected it could be the cord broken in the inside but it seems to also happen when no one touches it. Usually, when it stops charging, I unplug it from the wall, wait a few seconds and plug it back in, and it starts charging fine never stopping again.
    Anyone got a similar problem? I wonder if is there any way to just replace the AC power parts so I won't have to send the whole laptop for reparing.
    Thanks
    Pedro

    Hi
    I never had a problem with my Toshiba chargers but one old non-Toshiba AC adaptor died after 6 month of usage. After the replacement it works without any problems.
    I think you should check the BIOS update as mentioned by Akuma but for me it sounds more like a AC adaptor issue.
    So if the BIOS update doesnt help, the AC adaptor should be checked definitely.

  • Problem with the sound card

    Hello everyone,
    So here for 2-3 days, the sound of my Macbook starts beuguer (buy in October 2014). So when starting the mac when I listen to music all goes well, I can adjust the sound using the keys on my keyboard, and when I ca defois support appears to me that the sound is cut off, I think it 'is a problem with the sound card. But as soon as I plug in headphones, not set I have to go through the system preferences. By unplugging the problem remains the same on his fate, but impossible to resolve through the keyboard. I tried to put the volume icon on the top bar but even by setting it does not work here. The problem resolves itself after 30 minutes-1 hour. It's very annoying. Thank you in advance for your answers.

    Hi, Dolve
    This could be either hardware or software, so let's start with trying to get all drivers and software up to date. This page has updates for all your system. I would recommend getting at least your latest audio driver and BIOS downloaded. Following the installation, try using your sound again and see if the issue still persists.
    Best,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Recurring screen problems with the x220

    Hi,
    Does the x220 have a known problem with the IPS screens ...
    In November I came across this issue https://twitter.com/colonelrosa/status/271035133967101952/photo/1 Nothing to do with the video card and the screen was flickering based on the opening position..
    Thought it was a one off problem, send it back and got a replacement in December, fine. 
    Now only a few months later the same thing is happening to my replacement: https://twitter.com/colonelrosa/status/310716193529020416/photo/1
    It's the same area too. My warranty is live until 2015, but I can't take a week off every few months when it dies again. 
    My opinion of Lenovo has changed somewhat, I thought the computers were supposed to be built like tanks but I guess they're not as reliable as I'd heard. 
    I'm getting in contact with support tomorrow, I guess I'm just venting here. *sigh*.

    hey ODub,
    before all of this started, was any software installed or removed ?
    and before the bios was updated, was the unit freezing less or more ?
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

Maybe you are looking for