Problems with the built in line in

In garageband I can record with the built in microphone, but when the built in input is chosen I get no signal. I have tried using audacity and the built in input works fine.
any ideas?

http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein

Similar Messages

  • Problems with the Built in Camera - Help!

    Dear Comunity,
    In my Mac Book, when I turn on the built In camera, I get 4 horizontal red lines in the midle of the screen. i have the standard version of Leopard. Is there something I can do to change this?
    Thank you very much for your help

    Hello DUARTE
    Drivers for OS X apps are built into Mac OS OS. There are no drivers to reload for use with OS X.
    Try all relevant suggestions in How to Troubleshoot iSight.
    If you are still getting red lines on your display when you turn the camera on with any app in any user account you try, see your AASP for service.
    EZ Jim
    PowerBook 1.67 G

  • Problem with the built in ram HELP

    Hi I am in Shock, last week I was processing a huge file over 300 MB and suddenly my great IBook crashed, I re booted it and it made a HZZZZ sound and an error about memory appeared. After re starting it for the second time it went back to work fine, and without any problem.
    This is the spooky part: I was showing the configuration to a colleague today and it displayed only the 512 MB extra ram I added when bought, but for the built in ram it said EMPTY SLOT!!!!
    Please help, what can I do?
    Can I buy a spare? can I still use my lap top in this condition?
    Or do I have to get a new one?

    That's real strange....Are you sure it's not the other way around with an empty added ram slot? and are you sure you had the extra ram when you bought it and maybe it was accidentally not installed by manuafacturer as you had hoped and you had 512 all along. As for the HZZZ sound, no clue. I assume it's still under warranty, call Apple. Geof

  • Problem with the built in mic. HELP!

    ok so basically when i plug in my earphone the built in mic doesnt work. when i plug the earphone out it works so idk wats the problem y cant the mic work?

    Because the 2013 does not have any audio inputs only outputs
    http://support.apple.com/kb/HT6024

  • Having problems with the  Built-in stereo speakers, how can i activate them?

    Mi built-in stereo speakers are not working, and i cant increase or decrease the volume, the icon is in grey and i cant chance it

    There have been more than a few cases of a tiny "switch" inside the audio jack having issues. Try gently inserting a 3.5mm audio plug into the jack part way and removing it. Next try a bit further. Continue this until you get it all the way in (without jamming it in) or sound starts working properly.
    Also check to see if sound will play in ear/headphones via the jack.
    People have also had success gently wiggly an audio plug in the jack or using something small to poke around inside the jack and reset the switch. Gently, carefully . . . don't want to damage anything.

  • Downloaded Mt Lion.  Now my facetime launches then quits with message that there is a problem with the  C_L Kernel Plugin.  Everything else works just fine. I can get on line etc.

    I have have an early 2008  imac 8,1  It has been a good machine no problems.  UNTIL we downloaded Mt Lion. We can no longer use facetime.  We click on the icon it comes up, tries to connect then it disappears with the message that there was a problem with the C_L Kernel Plugin.  We can go on line without difficulty, everything else seems to be working.  Searching the internet shows that others have had the same problem with Mt Lion. But so far I haven't found a solution.  We have wiped the drive reloaded snow leopard then downloaded Mt Lion again. We put in a NEW hard drive and reloaded snow leopard then Mt Lion. We have changed out ram using apple ram. But we still get the same result. Everything works except for Facetime.  Is there some patch we have missed?  Facetime DOES work on our ipads without a hitch so I doubt it's the internet connection.  We've tried the imac both wirelessly as the ipads run and hardwired and get no where fast.  So any help at all would be appreciated.  We live in the boonies, the nearest mac repair is over 150 miles away so this is pretty nuch a do it myself affair.  We know the machine is old by most standards today. But we pretty much run our machines until they can't power up.  So we'd like to get this one back on its perch so to speak with its face time working.
    Thank you ahead of time for any advise help given.

    A log may help determine what the issue is ...
    Open the Console app located in HD > Applications > Utilites
    Select: System Diagnostic Reports  on the left.
    Copy and paste the most recent kernel panic or crash log in your Reply.

  • Hi,  I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to c

    Hi,
    I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to click the "Smooth clip motion" but the slider is not there for zoom. Any ideas why this is happening all of a sudden? It happens on all clips in this event. The entire event was analyzed after importing.

    What program are you using for this editing?
    We can ask a Host should move your query over to that forum.

  • Right, MacBook Pro 17" early 2011(Built March) and my new OCZ sata III 6G not working, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III.

    My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work. 
    Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.

    After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
    The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
    I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

  • Problem with the progress line in MS Project

    Hi there,
    I have a question about the progress line in MS Project. 
    My boss asked me to see how far we were with the work, so I inserted the column '% Complete' and then the progress line.
    Now my boss has a problem with the layout and I don't know how the fix it. The problem is at line 43 and 44, where the progress line indicates that we are behind on that group of tasks. But is it possible for the progress line to not indicate it on lines
    43 and 44 but only on lines 45 to 50? So my question is if it's possible to make the progress line go down (vertically) over line 43 and 44 instead of jumping to the back? 
    It would be much more simple if I could insert lines 43 ad 44 as text but not as a task, so that it just counts as a title of some tasks but nothing more than that. Is that possible in Project?
    (Lines 45 to 50 are subtasks for line 44, and 44 is a subtask for 43. So line 43 is the main task.)
    Normally there was a picture here but I couldn't upload it because my account is not yet verified... So hopefully you can understand the problem with the text. 
    If anyone could give my some advice or the solution, that would be great!
    Thanks in advance!

    Hi Thunderbal66--
    Basically your activity 43 is late because the sub tasks are also late. Thus MS Project shows the situation by moving the progress line backward. The progress line is automatically displayed based on your project progress, there is no way to manually change
    it unless you update your project.
    I think the question is not there. This is more a matter of project governance and transparency: why not showin that a project is late when it is late and taking the appropriate corrective actions?
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Lightroom 5, Mac. Problem with the Radial Tool. Marquee Lines disappear.

    Lightroom 5 Mac. Problem with the Radial Tool. I use this tool a lot. I must have hit a hot key by accident because between photos the marquee lines have disappeared and i don't know how to get them back. Without the marquee lines there I cannot rotate or expand the radial tool.

    I have attempted to uninstall, empty trash and a fresh download from Adobe. The problem is still there...

  • I have an iPad MD371Y. Since when I installed the iOS 6 I'm fading problem with the WiFi connection. The line fall everytime the device go on automatic stand by (if i do not touch it for 5 min). Can somebody be of Help?

    I have an iPad MD371Y. Since when I installed the iOS 6 I'm fading problem with the WiFi connection. The line fall everytime the device go on automatic stand by (if i do not touch it for 5 min). Can somebody be of Help?

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Problems with the new NAT in ASA 5510 (8.4)

    Hi together,
    i have some problems with the NAT statements in ASA Version 8.4.
    What i want is to translate the internal address of a server to the external address with a NAT rule.
    The ASA has only one WAN connection (named outside)
    The internal server has the ip address 192.168.0.221 (as example) and i want to translate all incoming traffic on port 3389 to the Server (192.168.0.221).
    This is only for training, i dont want to forward a 3389 port into the BAD in a productive Network
    first i create the network object for the inside server (192.168.0.221)
    object network Network_Obj_RDP
    host 192.168.0.221
    After that i create the access rule for incoming traffic on outside interface:
    access-list outside_access_in extended permit ip any any log debugging
    Next i create a access rule for the inside-prod network to allow the traffic to the RDP Server:
    access-list inside-prod_access_in extended permit object RDP interface outside object Network_Obj_RDP
    Now i create the NAT rule in the network object (Network_Obj_RDP):  
    object network Network_Obj_RDP
    nat (inside-prod,outside) static interface service tcp 3389 3389
    But if i want to connect via 3389 on the outside interface i see in the syslog this entry:
    Built inbound TCP connection 23248 for outside:80.187.107.132/7445 (80.187.107.132/7445) to inside-prod:192.168.0.221/3389 (External IP/3389)
    After a while the connection will be teardown with this message:
    Teardown TCP connection 23289 for outside:80.187.107.132/2294 to inside-prod:192.168.0.221/3389 duration 0:00:30 bytes 0 SYN Timeout
    It looks like that the acl works fine, but the NAT translation are wrong...
    perhaps somebody has a idea to fix this
    Looking forward and hope for help...
    Many thanks
    Greetings

    Hi Jouni,
    this is the correct Packet Tracer output i think:
    packet-tracer input inside-prod tcp 192.168.0.220 3389 8.8.8.8 4567
    Phase: 1
    Type: ACCESS-LIST
    Subtype:
    Result: ALLOW
    Config:
    Implicit Rule
    Additional Information:
    MAC Access list
    Phase: 2
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   0.0.0.0         0.0.0.0         outside
    Phase: 3
    Type: ACCESS-LIST
    Subtype: log
    Result: ALLOW
    Config:
    access-group inside-prod_access_in in interface inside-prod
    access-list inside-prod_access_in extended permit ip object Network_Obj-Productiv any log debugging
    Additional Information:
    Phase: 4
    Type: IP-OPTIONS
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 5
    Type: NAT
    Subtype:
    Result: ALLOW
    Config:
    object network Network_Obj_RDP
    nat (inside-prod,outside) static interface service tcp 3389 3389
    Additional Information:
    Static translate 192.168.0.220/3389 to 80.146.252.162/3389
    Phase: 6
    Type: USER-STATISTICS
    Subtype: user-statistics
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 7
    Type: IP-OPTIONS
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 8
    Type: USER-STATISTICS
    Subtype: user-statistics
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 9
    Type: FLOW-CREATION
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    New flow created with id 825, packet dispatched to next module
    Result:      
    input-interface: inside-prod
    input-status: up
    input-line-status: up
    output-interface: outside
    output-status: up
    output-line-status: up
    Action: allow
    That looks preety fine, but the way back isn´t right:
    packet-tracer input outside tcp 8.8.8.8 4567 192.168.0.220 3389
    Phase: 1
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   192.168.0.0     255.255.255.0   inside-prod
    Phase: 2
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   0.0.0.0         0.0.0.0         outside
    Phase: 3
    Type: ACCESS-LIST
    Subtype: log
    Result: ALLOW
    Config:
    access-group outside-in in interface outside
    access-list outside-in extended permit tcp any object Network_Obj_RDP eq 3389 log debugging
    Additional Information:
    Phase: 4
    Type: IP-OPTIONS
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 5
    Type: VPN
    Subtype: ipsec-tunnel-flow
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 6
    Type: NAT
    Subtype: rpf-check
    Result: DROP
    Config:
    object network Network_Obj_RDP
    nat (inside-prod,outside) static interface service tcp 3389 3389
    Additional Information:
    Result:      
    input-interface: outside
    input-status: up
    input-line-status: up
    output-interface: inside-prod
    output-status: up
    output-line-status: up
    Action: drop
    Drop-reason: (acl-drop) Flow is denied by configured rule
    I have no idea...

  • Many problems with the 'Export to Text' (.txt) in CR Xi

    Hi,
    I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
    These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
    - Multi-columns layout do not export as Multi-column (export only a one column);
    - Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
    - Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
    - Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
    - 'Keep Group Together' flag is not working.
    - 'Reset Page Number After' simply does not works when exported to text;
    - 'Keep object together' on TextBox/Section is not working.
    - Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
    I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
    If still supported, when will these bugs be fixed???
    Thanks

    Hi Rene
    Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
    Regards
    Sourashree

  • Communication Problem with the second battery

    Hello,
    In Lenovo Solution Center it says that there is communiction problem with the second battery. I already had this problem some months ago, back then it didn't charge the second battery. I got a new one and it worked again. Now it says the same thing "communication problem", but i can charge the battery and I also can't find any other sign of something not working. But still- it seems weird that the program tells me something is wrong. Can somebody help me?
    Thanks Lina

    Hi, Lina
    What is the machine type and model of your computer? Also, what operating system are you running?
    Thanks in advance,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Problem with the hierarchial fields in a Purchase order xml report

    Hi,
    I am having a problem with the hierarchy problem. We are populating attribute 15 of a PO header. some times it can be null. FYI, we are using 11.5.10 instance where oracle supports direct PO template rather than having a rdf file.
    And now in the xml report, if attribute15 of po header is not null then it is fine.
    But if attribute15 is null, then the template is picking from the next available attribute15 that is from the po lines. As the line level group of "LINES" is between the "PO_DATA" (header group), hence the template is checking for next available attribute15.
    Can any one please suggest how to design the template where we can make the template to check only for that tag at the header level group rather than the line level group tag?
    Thank You in advance.
    Regards,
    Srinivas.

    Hi
    Incase you want to transfer attachements from SRM to R/3, then you try implementing the BADI in SRM side. The BADI which will help in this case is
    <b>BBP_CREATE_PO_BACK</b> BADI.
    <b>Please read the standard SAP documentation of this BADI using SE18 Transaction, before making any code changes.</b>
    <u>Few Important SAP OSS notes to refer in this case -></u>
    Note 989184 - Transferred shopping cart with internal attachments
    Note 550071 - FAQ: EBP - Shopping Cart
    Note 916347 - Transfer shopping cart with internal attachments
    Note 1001130 - FAQ - Attachment questions (Buyside)
    <u>Few useful links -></u>
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
    Re: Attachments to backend
    Re: Document Attachments in Shopping Cart
    Re: Attachment in SRM
    Re: SRM Documents and Attachments
    Re: Limit in Attachments of an item in Shopping Cart
    Re: return delivery text from material document is not passed to SUS
    </b>
    Do let me know, incase you face any problems.
    Regards
    - Atul

Maybe you are looking for