Problems with the canon xf plugin for fcp 7 Can't log and transfer mxf files.
Hi
I can't log & transfer mxf files from a c300 camera in FCP 7 even though I installed the xf plugin.
When I looked at canon's website this link comes up but it doesn't work.
http://usa.canon.com/nw3s/CanonUSA/DownloadContents/English/0200206002EN.htm
Any suggestions?
Or other plugins that might work?
Thanks,
James
Hello jameskendi,
The most obvious reason we can tell as to why this may not work properly is the version of FCP you are using. You mention using FCP 7, although the plugin is specifically for FCP X. This is why you're having such difficulty. If possible, we'd recommend using an updated computer and or software to process these files.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
i have problem with the mic....sometimes others can hear me and other times not at all
can anybody provide me with the solution
-
I have have an early 2008 imac 8,1 It has been a good machine no problems. UNTIL we downloaded Mt Lion. We can no longer use facetime. We click on the icon it comes up, tries to connect then it disappears with the message that there was a problem with the C_L Kernel Plugin. We can go on line without difficulty, everything else seems to be working. Searching the internet shows that others have had the same problem with Mt Lion. But so far I haven't found a solution. We have wiped the drive reloaded snow leopard then downloaded Mt Lion again. We put in a NEW hard drive and reloaded snow leopard then Mt Lion. We have changed out ram using apple ram. But we still get the same result. Everything works except for Facetime. Is there some patch we have missed? Facetime DOES work on our ipads without a hitch so I doubt it's the internet connection. We've tried the imac both wirelessly as the ipads run and hardwired and get no where fast. So any help at all would be appreciated. We live in the boonies, the nearest mac repair is over 150 miles away so this is pretty nuch a do it myself affair. We know the machine is old by most standards today. But we pretty much run our machines until they can't power up. So we'd like to get this one back on its perch so to speak with its face time working.
Thank you ahead of time for any advise help given.A log may help determine what the issue is ...
Open the Console app located in HD > Applications > Utilites
Select: System Diagnostic Reports on the left.
Copy and paste the most recent kernel panic or crash log in your Reply. -
Is anyone else having problems with the Canon Online Store?
In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store. They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
Is anyone else having problems with the Canon Online Store?
Why does Canon not care to track reported problems with the storefront part of their web-site?
I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far. Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not. In trying to register that lens, I looked up on the Canon web site where to find the serial number. Since my new lens did not have any numbers there, I was concerned I had been sold a fake. But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was.
Is Canon like that with other problems, as well? Or is their "batting" average better than my very limited experience?
I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral": EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)!
Regards and Thanks,
Calen
As an old friend used to always say,
"Keep Looking Up!"
CalenHi Danny. Thanks for replying.
I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years. And, yes, it is the latest version. Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT? WHEN did Canon STOP SUPPORTING Firefox?
I've been told that there are 2 pending orders in my account. Yet, I NEVER placed those orders! WHY CAN'T CANON SEE THAT THIS IS A PROBLEM???
Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place! But, maybe that's a bit too grown up of an answer for you!
"Award-winning" support??? And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS??? The OSTRICH?
Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
Thank you for your "prompt" attention to this matter!
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen -
I am getting a pop up box saying that there is a problem with the plug in container for firefox. It keeps saying do I want windows to find a fix for it and close it or do I just want to close the program. What is this plug in container for firefox and why am I constantly getting this message? It has been happening for the past month or two.
It means either you have a faulty/out of date plugin, or your firewall/antivirus is causing problems with Firefox.
Make sure you update all your plugins and disable unwanted ones.
https://www.mozilla.org/en-US/plugincheck/
https://support.mozilla.org/en-US/kb/disable-or-remove-add-ons
Also, make sure your firewall/antivirus is not blocking plugincontainer.exe from the Firefox folder in your computer. How you make sure that's not the case will depend on your firewall/antivirus. -
Problem with the weblogic-maven-plugin
I am in the process of converting from ant to maven, but I am having a problem with the weblogic-maven-plugin. Has anyone used this plugin successfully? Here is the error I am receiving even though I have a dependency on the xbean.jar in my pom, and it is in my local repo.
java.lang.NoClassDefFoundError: com/bea/xml/XmlException
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescript
orManager(AbstractDescriptorLoader2.java:301)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescript
orBeanFromReader(AbstractDescriptorLoader2.java:749)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescr
iptorBean(AbstractDescriptorLoader2.java:376)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescrip
torBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescrip
torBean(AbstractDescriptorLoader2.java:729)
at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescri
ptor.java:134)
at weblogic.servlet.jsp.JspcInvoker.parseDescriptors(JspcInvoker.java:27
6)
at weblogic.servlet.jsp.JspcInvoker.compile(JspcInvoker.java:187)
at weblogic.application.compiler.AppcUtils.compileWAR(AppcUtils.java:353
at weblogic.application.compiler.WARCompiler.compile(WARCompiler.java:78
at weblogic.application.compiler.flow.AppCompilerFlow.compileInput(AppCo
mpilerFlow.java:118)
at weblogic.application.compiler.flow.AppCompilerFlow.compile(AppCompile
rFlow.java:43)
at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDri
ver.java:69)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineD
river.java:26)
at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36
at weblogic.application.compiler.FlowDriver.run(FlowDriver.java:26)
at weblogic.application.compiler.Appc.runBody(Appc.java:163)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.application.compiler.Appc.main(Appc.java:174)
at weblogic.appc.main(appc.java:14)
at jrockit.reflect.InitialMethodInvoker.invoke(Ljava.lang.Object;[Ljava.
lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;
I)Ljava.lang.Object;(Unknown Source)
at weblogic.ant.taskdefs.j2ee.CompilerTask.invokeMain(CompilerTask.java:
290)
at weblogic.ant.taskdefs.j2ee.Appc.privateExecute(Appc.java:250)
at weblogic.ant.taskdefs.j2ee.Appc.execute(Appc.java:159)
at org.codehaus.mojo.weblogic.AppcMojo.execute(AppcMojo.java:180)
at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPlugi
nManager.java:412)
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(Defa
ultLifecycleExecutor.java:534)Here is what you need to get the maven-weblogic-plugin appc goal to work:
<project>
<build>
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>weblogic-maven-plugin</artifactId>
<version>2.9.0-SNAPSHOT</version>
<configuration>
<inputArtifactPath>${basedir}/../../jar/broker.war</inputArtifactPath>
<verbose>true</verbose>
</configuration>
<executions>
<execution>
<phase>package</phase>
<goals>
<goal>appc</goal>
</goals>
<inherited>false</inherited>
<configuration>
<verbose>false</verbose>
<debug>false</debug>
<projectPackaging>war</projectPackaging>
</configuration>
</execution>
</executions>
<dependencies>
<dependency>
<groupId>com.sun</groupId>
<artifactId>tools</artifactId>
<version>1.5.0</version>
</dependency>
<dependency>
<groupId>weblogic</groupId>
<artifactId>wlxbean</artifactId>
<version>9.2</version>
</dependency>
<dependency>
<groupId>weblogic</groupId>
<artifactId>xbean</artifactId>
<version>9.2</version>
</dependency>
<dependency>
<groupId>weblogic</groupId>
<artifactId>weblogic-container-binding</artifactId>
<version>9.2</version>
</dependency>
<dependency>
<groupId>weblogic</groupId>
<artifactId>wlw-util</artifactId>
<version>9.2</version>
</dependency>
<dependency>
<groupId>weblogic</groupId>
<artifactId>javelinx</artifactId>
<version>9.2</version>
</dependency>
<dependency>
<groupId>weblogic</groupId>
<artifactId>wlw-langx</artifactId>
<version>9.2</version>
</dependency>
<dependency>
<groupId>weblogic</groupId>
<artifactId>bcel</artifactId>
<version>5.1</version>
</dependency>
</plugin>
</build>
<dependencies>
<dependency>
<groupId>weblogic</groupId>
<artifactId>wlw-langx</artifactId>
<version>9.2</version>
</dependency>
</dependencies>
<project>
You need to install/deploy all of the above dependencies manually into your repo. -
Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!
OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”. -
Hi; Attempting to upgrade to version 10.5.x, but I keep on getting an error - "There is a problem with the Windows Installer Package". I'm installing as Administrator, and have done an uninstall of the earlier version. Any ideas??
Needing to upgrade to allow connection of a 4S iPhone to the Laptop.
Thanks!! - Tim.Repair your Apple Software Update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you can't find ASU in all program, you can do it in CONTROL PANEL, ADD N REMOVE PROGRAMS. -
Hi Everyone, Just wanted to seek your assistance. We're using and Adobe InDesign CS6. The XMedia UI Plugin for it, will it allow you to open .xml files in InDesign or that plugin is just used for Importing XML? Thanks in advance.
I've moved your question to the InDesign forum.
-
Numerous problems with the Adobe AIR runtime for Android
I created a app on the platform Adobe AIR for Android, which requires for AIR. The app is very popular in the Android Market, but many users complain of problems with the installation of Adobe Air runtime.
For example these phones users: LGE LG-P698, LG Pecan, HTC Wildfire. But judging by the fact that users have access to the installation of Air, their phones are compatible with it.
Tell me how do I solve the problem?
In addition, I have a few questions:
1. Decides whether the problem of export application with embedded AIR runtime?
2. I build my apps with the help of ADT. How in this case to make embeding AIR runtime?
3. Is it possible to prompt the user to download and install older versions of AIR? Where to find its?
I hope to help, because the problem is global.Hi Astraport,
I think you should embed the air runtime in your application,
Some time ago I've written a step by step guide, have a look at this post:
http://forums.adobe.com/message/3961579#3961579
I hope it helps -
I just installed the latest security update and now I cannot access iPhoto. I keep getting a message that it quit unexpectedly due to some conflict with the Scene Kit plugin.
I'm using a Macbook Pro Mavericks Version 10.9.5Probably the reboot used to log into the Guest account and then your account again fixed the problem. If often will.
-
Has anyone had problems with the latest Lexmark printer driver update? My Lexmark printers won't work with the latest driver update. If I reinstall an older version of the drivers, they work.
Mine crashed once with new update, but working fine.
I had to delete old printer, restart iMac, and then reinstall
new drivers to get it to work. Would not complete without
the restart after deleting non-working printer. No problems
since and all features working. -
Satellite Pro A120: I have problems with the graphics driver installation for W2k
I have installed windows 2000 on an A120 the system is fully service packed and up to date before I even begin installing the required drivers I am unable to restart the system. Once I install the drivers as recommended I have problems with the graphics driver as it will not install because it requires a restart and then I am unable to install any new programs that require a restart as the driver has not installed correctly.
The laptop is a A120 Pro, 1 week old and came with XP home, because of this toshiba will not offer me support as I have changed the O/S even though they obviously support 2000 on this laptop as they supply the drivers.
Any ideas would be greatly appreciated.the reason the driver is not working is down to a problem with the windows 2000 not having the ability to reboot.
When you select restart the system appears to power down then stays switched on. Now if I try to install software I get an error saying that the system needs to complete a restart to finish the install of the driver.
The restart problem happens as soon as win2k is installed as although I have now shipped the laptop to the sales team I have another one which has just had a clean install of win2k without any drivers and the fault is present on this one.
I am thinking it could be to do with power management but I'm not to sure as I have never come across this as I normally purchase machines which accept just about any O/S. -
is the camera connector kit compatible with the Canon EOS 350D digital camera, as I can get it to work
Check what you've got 'Communications' set to on the camera's settings - it needs to be 'Print/PTP', not 'Normal' 'Normal' to 'PTP' :
-
FCP Crash when opening log and transfer with some AVCHD footage on a card
Hi,
I'm using a freshly (re)installed version of FCP 7 on a brand new macbookpro loaded with 8gb ram and equipped with a small 2ghz Intel Core i7
I get footage shot on Panasonic ag-hmr10 minicams coming on SD cards as AVCHD footage. Sometimes the files are quite big, 17gb of compressed footage.
When I go to log and transfer, to convert the footage in apple prores, the l/t window opens, I see a preview of my footage, than the spinning beach ball of death shows up and FCP crashes every time. I've tried deleting the preferences and reinstalling the software. Still, it keeps crashing. Now the same file on a different computer equipped with FCP will be processed, slowly but surely.
Now I know I can work around this problem by going to toast as an encoder, but I want to fix this issue so I can operate from FCP. I've seen this problem posted before but never found any good solution.
Any suggestions?Have you tried setting the L&T AVCHD audio conversion prefs to plain stereo?
Open the L&T window.
Click on the gear icon towards the upper center of the frame.
Select "Plain Stereo" For the AVCHD plugin.
MtD
Maybe you are looking for
-
I have had the same account for over 4 years. I have had my ipod touch for 2 years and have always been able to access the itunes store and download content from my pc and my ipod touch. A few months ago, I started to receive the message that I've
-
How to assign LogicalDirectory in JCA File Adapter - OSB
in SOA Suite, you assign a value to LogicalDirectory by setting a property in composite.xml how to achieve the same in OSB?
-
I clicked on my utilities icon and drug it up from the bottom and now its gone:( how can i get it back?
-
Creating custom jsp component - Finding the jsp tag descriptor htmlb.tld
Hi, I want to create my own TabStrip component by extending the SAP Standard HTMLB components TabStrip and TabStripItem. I've found the classes that I need to extend under the jar below, but I can't find the htmlb.tld file. I need to make a copy of t
-
How to pad OST file to prevent fragmentation
Does anyone have any clever tricks on how to quickly fill then empty an OST file, so you can get it to what your maximum mailbox size in, then clear out the padded space so it has a ton of free space in it, and the file will no longer become fragment