Problems with the combination Mountain Lion, Parallels 8 and VPN

Hi there,
Have performed an straightforward upgrade of the OS X to Mountain Lion and Parallels I have have a problem keeping the vpn connection for more than an hour.
In order to get a the connection reetablished I need to restart the windows session in Parallels.
Is there any one else facing the same problem?
Best Regards,
Wolves0097

The VPN log looks like:
1      13:34:36.904 09/11/12 Sev=Warning/3
CM/0xA3100027
Adapter address 10.211.55.6 has changed or not detected. Current address(es): 10.98.70.169.
2      13:34:52.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
3      13:35:07.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
4      13:35:07.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
5      13:35:08.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
6      13:35:09.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
7      13:35:10.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
8      13:35:11.861 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)
9      13:35:12.407 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)

Similar Messages

Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

Install this to get X11 functionality back in 10.8
http://xquartz.macosforge.org/landing/
Worked great for me and others.
Jerry

HT1529 I have the new mountain lion OS and every now and again my screen zooms in. i can't work out what I'm doing to make this happen

I have the new mountain lion OS and every now and again when I'm working with the mouse the screen zooms in. How does this happen and how can I reverse it

You are double tapping with 1 finger.
System Preferences > Mouse > Point & Click > Smart Zoom.

Adobe products with the new mountain lion

Im wondering if my adobe photoshop products will work with the new mountain lion update

You haven't provided any useful information, I'd suggest you state what versions you are referring to and then check with Adobe to see if they're supported by ML. Photoshop has been out for 10 years and has gone through many many versions, so you need to be specific when posting.

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?

In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

I recently purchased this 21.5 inch iMac in the month of February. The woman that helped me through the process of purchasing this told me that it comes with the latest Mountain Lion. which it did, but i cant write a review in the app store! Help...

II recently purchased this 21.5 inch iMac in the month of February. The woman that helped me through the process of purchasing this told me that it comes with the latest Mountain Lion. which it did, but i cant write a review in the app store! Help...

You want to write a review about Mountain Lion? I'm not sure that you can write about the OS at the app store - it's not an app. Or are you talking about the online Apple store? If you want to send feedback to Apple, you could use this:
http://www.apple.com/feedback/macosx.html

Problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) .

Hi experts
I am having problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) of the datasource 2lis_02_acc .
I have created custom cube and have mapped the fiels MEINS to infoobject 0PO_UNIT and MENGE(Quantity) to infoobject 0CPQUAOU.
Now the data is successfully loaded in the cube but the values of the above 2 fields are getting changed.
In r3 the value for MEINS is "AU","EA" , "H" etc but this field value is getting converted to "LE" in the cube and also the field MENGE(Quantity
) in r3 is for example "1" it is getting converted to 3 in the cube. do u have any idea what is the problem.
The rule type is direct assingment and there is no routine .
Any clues.
Thank you.

holy devilz wrote:
Hi experts
> I am having problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) of the datasource 2lis_02_acc .
>
> I have created custom cube and have mapped the fiels MEINS to infoobject 0PO_UNIT and MENGE(Quantity) to infoobject 0CPQUAOU.
> Now the data is successfully loaded in the cube but the values of the above 2 fields are getting changed.
> In r3 the value for MEINS is "AU","EA" , "H" etc but this field value is getting converted to "LE" in the cube and also the field MENGE(Quantity
> ) in r3 is for example "1" it is getting converted to 3 in the cube. do u have any idea what is the problem.
> The rule type is direct assingment and there is no routine .
> Any clues.
> Thank you.
Hmm, your system should consider the alternative UOM maintain in the material master.
Each material in SAP has its standard, base unit of measure (stored in MARA-MEINS). To allow using alternative units, those can be maintained per material in table MARM. So, assuming the Base UoM is only considered (for LE), it converts material quantity from one unit to another, most likely from alternative units to the base one. So, changing that settings must solve. http://goo.gl/JuZlm
Alternative steps:
1.Goto MM42 (Assuming there's no BAPI req?)
2. change po unit from basic unit to other -> save OK
3. change po unit from other to basic unit -> save OK
Also, MD63 shows all data in the base unit of measure.
If you want to explore basic steps, goto RSD1 > Additional > Alternative UoM.
Best Regards, @{

HT201210 i have problem with the firmeware file...and I do not know what is that

i have problem with the firmeware file...and I do not know what is that

Make sure you are updating your phone the correct way, by connecting to iTunes and clicking Check for Updates on the Summary tab of your iTunes sync settings. Do not try to download the firmware file from the internet first. Also be sure iTunes is up to date before updating.
Delete the existing firmware (.ipsw) file and try again. You will find it at one of the following locations:
Mac OS X: ~/Library/Application Support/MobileSync/Backup
Windows XP: %AppData%\Apple Computer\MobileSync\Backup
Windows Vista: %AppData%\Roaming\Apple Computer\MobileSync\Backup
Windows 7: %AppData%\Roaming\Apple Computer\MobileSync\Backup

Problems with scrolling after mountain lion download.

I just downloaded mountain lion today and ever since the download I am having issues with the scrolling for my magic mouse and trackpad. My problem is when I scroll down on my mouse or trackpad it actually goes up on the page and vice versa. I have seen others have had some scrolling issues but not exactly the same as mine. Just wondering if there is any known fix for this problem? I did the PRAM reset and also the SMC reset and that didn't fix the problem unfortunately.

Look in System Preferences > Trackpad (or mouse) > Scroll & Zoom tab > uncheck Scroll direction: Natural.
The scrolling direction has been changed to a technique where your push the screen up or pull it down, takes a few days to get used to. The swipe directions will also be affected by this change.

Is anyone having problems with the newest update of ITunes and then trying to update the Iphone 4?

I updated the ITunes on the computer and that went ok, but when i went to go and update the IPhone 4 it went to restore it to the factory settings and then something happened where it wouldn't let it update and now the phone is stuck in Limbo world with the apple symbol showing and a status bar, but nothing else. also the phone is not showing up as being plugged in while in this limbo faze.

Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

Installing Canon MF4320-4350 (UFRII LT) with the new mountain lion OS.

I cannot get my Canon MF4320-4350 (UFRII LT) printer to work since I installed the new mountain lion OS. Please help! Thanks.

If you upgraded to Mountain Lion from Lion or Snow Leopard and had the UFR2 LT driver installed for that OS, you will need to remove the old UFR2 driver and install the latest. Before you do this, if you already created a printer for the MF43xx in Print & Scan, remove this printer.
Then, on the Mac, open Finder and navigate to HD > Library > Printers > Canon and trash the UFR2 and CUPSCMFP folders.
Still in Finder, navigate to HD > Library > LaunchAgents and trash the files "jp.co.canon.UFR2.BG.plist" and "jp.co.canon.CUPSCMFP.BG.plist"
Restart the Mac and after you log back in, install the Canon UFR2 v2.41 driver and then add the MF43xx via Print & Scan.

Problem with Mail in Mountain Lion -- reply all function

Ever since upgrading to Mountain Lion in Mail when I hit reply all my email address is included in the cc line, so I get sent my responses. Any one else having this problem or know how to fix it? This didn't happen in previous versions.

re: "like on my iMac, when it sleeps, it doesn't fetch email anymore like it did before Mountail Lion"
First, this really should be in a seaparate thread.
What is happening, just like my MBP, is that ML is *actually* sleeping properly. For as long as I used 10.7 on my MBP, it appered to be sleeping, but it really was not (screen black, etc.). And yes, mail would still come through.
Now with ML, it sleeps like it is supposed to sleep, and mail is not received when asleep.
Nothing wrong, no bug, just working properly now.
HTH

Problems with mail in mountain lion

I installed mountain lion and since doing so I cannot get past the migrating data window when I try to open mail. I have tried deleting the envelope index (although I can't remove it from the trash as it continually says it is in use). I have also tried moving the smartmailboxes.plist and backup files to my desktop but still no joy. Can anyone suggest what to do next?
Dan

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Quit Mail.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Relaunch Mail and test. If the problem is resolved, you'll have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.

Problems with iMac since Mountain Lion upgrade

So , several problems that I have experienced since upgrading to Mountain Lion.
1. When I "log off" off my iMac from the top left "apple" symbol, I get the rainbow wheel of death.
2. When accessing YouTube home screen or yahoo in Safari, the page is a white screen. Nothing more, nothing less.
* I have been reading some people saying that this happens to them too, but only when using an account with parental controls.
3. Hard drive "grinds" incessantly.
* I have never even seen the rainbow wheel or heard my hard drive grind on my iMac untill this upgrade.
Anybody know of any solutions, or also having these issues?

For anyone else having the "white screen" issue with youtube, and/or yahoo issue. I seemed to have repaired the issue. I turned the parental controls off for both of my kids accounts, restarted my Mac, and the problem vanished.
I also turned the parental controls back on after this, restarted the computer, and the problem came back.
*** This is 100% a Parental Control/Mountain Lion glitch. Hopefully Apple knows and is working on a solution. The sooner they fix it, the sooner I can turn the parental controls back onto my kids accounts.

Problems with the combination Mountain Lion, Parallels 8 and VPN

Similar Messages

Maybe you are looking for