Problems with the Diff-Feature
Hello there,
i am new to EMF-Compare and i use it to compare parts of my models. I have enountered a problem with the comparison where there are differences but the compare algorithm cant find them.
here are my two models
Here is the code i use:
IComparisonScope scope = new DefaultComparisonScope(sourceEPackage,
deletedModelEPackage, null);
Comparison comparison = EMFCompare.builder().build().compare(scope);
List<Diff> differences = comparison.getDifferences();
After i have run the code the list is empty.
Any other changes are found and properly shown.
The model on picture 2 is contained in another element not shown in the screenshot. Is it possible that this causes the error?
I am using org.eclipse.emf.compare with version 3.0.2.201501201328
I would appreciate any help. Thank you.
Hi Simon,
Unfortunately, EMF Compare doesn't support the comparison of EGenerics inside EType Parameters yet. So it is normal that you see no differences in your case.
You can raise an enhancement bug to describe what you need: https://bugs.eclipse.org/bugs/enter_bug.cgi?product=EMFCompare
If you're interested to contribute to EMF Compare and manage this case, you can follow the contributor guide: https://wiki.eclipse.org/EMF_Compare/Contributor_Guide
Regards,
Similar Messages
-
Problems with the Resume feature
Hello.
Since I installed Lion I've been having a problem with the Resume feature. I've been searching for a solution, or at least others with the same problem, but in vain.
I've always used the feature, but sometimes it works, other times not so much. As an example: I might have Safari opened with multiple tabs and TextEdit opened with multiple windows too, even Finder with multiple windows opened. I shutdown/restart with Resume checked and when it's login in the first thing I see are all the windows I had from last time, after a few moments the Safari window disappears (but the application is still opened), or the TextEdit windows disappear, or even Finder or other application I might had open before. It seems to be a little random in terms of what applications "lose" their windows at login, sometimes all, a few, or none.
Is anyone having the same problem? Is it a bug or a problem with the installation?
Appreciate the help.are some of these apps on fullscreen mode? they will disappear after opening, since they can't all be visible at the same time.
and do you use spaces? similar story, if the app in question is in a space other than finder. -
I am getting an error message when opening Notes with the new Mountain Lion OS. When it opens it begins to pinwheel and then it closes and an error message box opens up. Is anyone else having this problem?
Try this: http://forums.adobe.com/message/2796075
-
I use a Gmail account in Mac Mail and I'm having problems with the Notes feature
Whenever I create a note two copies are saved in the All Mail folder. One that is titled "New Note" without any content in the note and another that is the actual note that I meant to make. Why does Gmail create the unnecessary "New Note"?
Hi
I have just upgraded from an iPod touch to iPhone and the notes app won't work at all. It imported note from my iPod (which used to work fine) but will not let me add or delete notes and the contents of the notes are also screwed up. If it was a computer app I would bin it and reload but how do you that with an iPhone.
I can't face calling the Apple help line. Anyone any suggestions? -
Problems with the shuffle feature in itunes.
When I first bought my nano I would create playlists in itunes and turn the shuffle on there. You would see on the screen that the playlist was shuffled, and it would be when you went to use the ipod. After an update though I would do the same thing and the itunes screen shows it shuffling but the ipod plays the songs in alphabetical order still. Even when I plug the nano back in to my computer the itunes still show's it as shuffling. my software is the most up to date version.
anyone else having this problem?To shuffle a playlist on an iPod, in the settings menu, make sure that shuffle is set to "songs". Then select any playlist, then press play (not select). The songs within that playlist will be shuffled.
-
Adobe Muse problem with the "pin" feature
I am creating a prototype under the tablet setup. I can't access the "pin" function for some reason. It won't activate at all. Seems deactivated. Anyone know why?
Hi thanks again,
I'm a little weary of providing the url's as they are prototypes of a product not yet released and this work is being done as part of client pitch. I have been using muse as a means of prototyping our work to communicate with development and test out visuals, and transitions. This tool has been extremely helpful for me as I am a designer that has very limiting coding skills.
I can tell you that I'm not using a web font (I find the image output of text [not web-friendly] is pretty jaggedy) so I have been doing the majority of my work as part of png's as pages. Both sites are making use of the same png's output from Photoshop. They are completely one png. All assets are image files actually, which lends me to believe that somehow the web output of muse is rendering the images better than the desktop output.
re: Were the desktop and tablet layouts created in the same or different .muse files? No they were created in different .muse files.
re: Do they both have the same setting for "Convert opaque PNG to JPEG" in the "Content" panel of Site Properties? Yup they both have those checked.
Hope that helps:) I love the program, but am looking forward to enhancements. I would love to provide user feedback somehow. Do you know how I may accomplish this? -
My iphone 4 never had a problem with the personel hotspot until 2-3 days ago .
Now when I turn the hotspot on none of my other i-devices can see it. I have tried the turn on/off thing and I have tried the complete turn off holding the 2 buttons on both the phone and the other devices (ipad x 2 and ipods x 3). This is very frustrating.
Oh and I have spoken to my carrier it is not them.
Any suggestions?Setting >> General >> Cellular >> Cellular Data Network >> Reset Setting
Restart (hold on/off button >> slide to power off)
I got same prob after update ios 6.1 (not sure during update to 6.0.1) iphone 5 -
Problems with the Proxy Programme--Please help
Hi All,
I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
ProxyServer:::>posting request
ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
ProxyServer:::>postRequest
I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
ProxyServer:::>posted request successfully
ProxyServer:::>writing response
ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
ProxyServer:::>writeResponse exiting
ProxyServer:::>wrote response successfully
I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
package server.proxy;
//import all servlet related classes
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import server.resources.*;
//My Proxy server --->Currently it is very simplea and relies on
//other proxy servers of an already connected network.
public class ProxyServer extends HttpServlet
//stores the resource bundle
private ServerResBundle resBundle = null;
//checks for the mode of operation
private boolean proxySet = false;
private String proxy = null;
//storing the original System out/err etc
private PrintStream sysOutOrig = null;
private PrintStream sysErrOrig = null;
private InputStream sysInOrig = null;
//initialise certain features that are required later
public void init() throws ServletException
try
//initialise the resource bundle
this.initResBundle();
System.out.println("ProxyServer:::>res bundle init");
//set the mode of operation
this.setMode();
System.out.println("ProxyServer:::>mode set");
//set the system out and err --System.setOut etc
this.setSystemOutErr();
System.out.println("ProxyServer:::>in/out/err set");
}//End try
catch(Exception e)
System.out.println("Exception in init..."+(e.getMessage()));
throw new ServletException(e);
}//Edn
catch(Throwable e)
System.out.println("Irrecoverable Error...");
throw new ServletException(e);
}//End
}//End init
//method to init the resource bundle;
private void initResBundle()
this.resBundle = ServerResBundle.getBundle();
}//End
//method to set the mode of the server--proxy or direct
private void setMode()
//read the target proxy property from the bundle and
//if it is set,take that URL
String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
if ( (temp != null) && (temp.length() > 0) )
this.proxySet = true;
this.proxy = temp;
temp = null;
}//End
}//End
//method to set the system out and err etc
private void setSystemOutErr() throws Exception
//keep a copy of the original system out and error
this.sysOutOrig = System.out;
this.sysErrOrig = System.err;
try
//read the options adn if they are set, take the values directly
String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
if ((newOutStr != null) && (newOutStr.length() > 0))
System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
}//End if
if ((newErrStr != null) && (newErrStr.length() > 0))
System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
}//End if
}//End
catch(Exception e)
//restore the stuff
System.setOut(this.sysOutOrig);
System.setErr(this.sysErrOrig);
}//End
}//End
//this is where the proxy functionalities will be embedded
public void service(HttpServletRequest req,HttpServletResponse resp)
throws ServletException,java.io.IOException
//conenction URL
URL target = null;
//conenction to the remote object
URLConnection targetConn = null;
//stores the OOS and the OIS
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
try
//check for the mode of operation
if (proxySet)
URLConnection objects go through two phases: first they are created, then they are connected.
After being created, and before being connected, various options can be specified
(e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
if necessary.
//for the URL to the proxy
target=new URL(this.proxy);
//conenct to the proxy
targetConn = target.openConnection();
//set the details of the connectuon
targetConn.setDoInput(true);
targetConn.setDoOutput(true);
targetConn.setUseCaches(false);
// If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
targetConn.setAllowUserInteraction(true);
//connect to the remote object
// targetConn.connect();//call this only when all the request properties are set
System.out.println("ProxyServer:::>posting request");
//post the received request to the URL
this.postRequest(targetConn,req);
System.out.println("ProxyServer:::>posted request successfully");
System.out.println("ProxyServer:::>writing response");
//receive the response
//write the received response to the client
this.writeResponse(targetConn,resp);
System.out.println("ProxyServer:::>wrote response successfully");
}//End if
else
//currently this functionality is not supported
throw new ServletException(
(String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
}//End
}//End try
catch(Exception e)
if(e instanceof ServletException)
throw (ServletException)e;
}//End
if (e instanceof IOException)
throw (IOException)e;
}//End
//wrap it up in ServletException
throw new ServletException(e);
}//End
}//End
//method to write the response back to the client
private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
throws ServletException
//get all the header fields from the response connection and set them to the
//response of the servlet
Map headerFields = null;
Iterator headerFieldEntries = null;
Map.Entry header = null;
//stores the input stream to the conn
BufferedReader brConn = null;
//stores the writer to the response
PrintWriter prResp = null;
//checks if the proxy authentication needed or not
boolean proxyAuthReqd = false;
try
//juste ensuring that the proxy authentication is reset
proxyAuthReqd = false;
if( (targetConn != null) && (resp != null) )
//Returns an unmodifiable Map of the header fields.
//The Map keys are Strings that represent the response-header field names.
//Each Map value is an unmodifiable List of Strings that represents the corresponding
//field values
headerFields = targetConn.getHeaderFields();
//Returns a set view of the mappings contained in this map
Set temp = headerFields.entrySet();
//Returns an iterator over the elements in this set
headerFieldEntries = temp.iterator();
if (headerFieldEntries != null)
while (headerFieldEntries.hasNext())
Object tempHeader = headerFieldEntries.next();
if (tempHeader instanceof Map.Entry)
header = (Map.Entry)tempHeader;
Object headerName = header.getKey();
Object headerValue=header.getValue();
System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
//do not select the key-value pair if both the key adn the value are null
if ( ( headerName == null) && (headerValue == null) )
continue;
}//Enmd
if (headerValue != null)
List headerValList = null;
if (headerValue instanceof List)
headerValList = (List)headerValue;
}//End
if(headerValList != null)
for (int i=0;i<headerValList.size();i++)
Object headerValueStr = headerValList.get(i);
if (headerValueStr instanceof String)
//note that the header-key can not be null for addHeader
//I have made this temporary provision to make the programme work.
resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
(String)headerValueStr);
//check if the proxy authentication required or not
if (((String)headerValueStr).
indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
//proxy authentication is needed
proxyAuthReqd = true;
}//End
}//Ednd of
else if (headerValueStr == null)
resp.addHeader(( (headerName==null)? null :(String)headerName),
null);
}//End
}//End for
}//End if
}//End if
}//End
}//End while
}//End if
//get the writer to the client
prResp = resp.getWriter();
System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
//juste test a simple header
System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
//if the proxy asks you for authentication,pass on the same to the client
//from whom you have received the request.When this flag is true,the connection
//is closed by the remotehost adn hence any attempt to open in input steram
//results in an error ie IOException
if (!proxyAuthReqd)
//now get the content adn write it to the response too
brConn = new BufferedReader(new InputStreamReader(
targetConn.getInputStream()));
String tempStr = null;
while ((tempStr = brConn.readLine())!=null)
prResp.println(tempStr);
}//End while
//close the connections
brConn.close();
}//End if
else
prResp.println("Proxy Authentication needed...");
}//End
//close the streams
prResp.flush();
prResp.close();
}//End if
System.out.println("ProxyServer:::>writeResponse exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
//method to post request to the internet
private void postRequest(URLConnection targetConn,HttpServletRequest req)
throws ServletException
//extract the header parameters and the body content from the incoming request
//and set them to the new connection
Enumeration reqHeaders = null;
//reads the incoming request's content
BufferedReader brReqRd = null;
PrintWriter prResWt = null;
//stores temp header names and values
String headerName = null;
String headerValue = null;
try
if( (targetConn != null) && (req != null) )
reqHeaders = req.getHeaderNames();
//extract a header adn set it to the new connection
while (reqHeaders.hasMoreElements())
headerName = (String)(reqHeaders.nextElement());
headerValue = req.getHeader(headerName);
targetConn.setRequestProperty(headerName,headerValue);
System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
}//End
System.out.println("ProxyServer:::>postRequest\n");
//establis the actual connection
//calling this method bfore the above loop results in IllegalStateException
targetConn.connect();
//NOTE : try reading from and writing into OIS and OOS respectively
//now read the contents and write them to the connection
// brReqRd = req.getReader(); //this hangs for some reason
brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
System.out.println("Got the reader..brReqRd = "+brReqRd);
if (brReqRd != null)
String temp = null;
//establish the printwriter
// prResWt = new PrintWriter(targetConn.getOutputStream(),true);
prResWt = new PrintWriter(targetConn.getOutputStream());
System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
System.out.println("In while::>temp = "+temp);
prResWt.println(temp);
}//Emd while
//close the streams adn go back
brReqRd.close();
prResWt.flush();
prResWt.close();
}//End
}//End outer if
System.out.println("ProxyServer:::>postRequest exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
}//EndHi serlank ,
Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks... -
Problem with the calculator and modifications needed
i have got a problem with the calculator on my iphone i.e i cannot find any DEL key or Backspace....the problem is when typing a long value if one number is entered wrong we should start again.
EXAMPLE...if i need to type 114678047 * 345612
if acidentally if i type 114678047 * 3455 ( then i should start over typing "C" key)
i should start over to type the whole data..if we have a delete key we can just correct it right away and continue.....rather than starting over
we can find this feature in all the other smart phones , i dont know why apple coudnt find that
even every scientific calculator have a DEL key...
Thanks
vickyk7FEEDBACK
If you want to give Apple feed back then do it here http://www.apple.com/feedback/iphone.html -
There is a problem with the Outlook database. Your database could not be rebuilt. [-18000]
For home use, I recently changed from Windows PC to MacBook Air. I have an iPhone 4 which I synched without problem to the PC. Since I have used Outlook for years on Windows and trusted advisors assured me Microsoft Office on the Mac is the same as Microsoft Office on Windows, I decided to continue using Microsoft Office. Because I cannot get my Outlook calendar to sync reliably to iCal / iPhone and because I have found a small but meaningful number of features I use daily in Outlook Windows do not work on Outlook Mac, I have never been in so much pain!
The latest problem is Outlook does not complete startup. I get this error:
There is a problem with the Outlook database. To use the database, you must rebuild it using the Database Utility.
I run the utility but it never completes successfully.
Step 1 of 5: Scannning...
Step 2 of 5: Verifying...
Step 3 of 5: Copying records to new database...
Step 4 of 5: Recovering data...
Your database could not be rebuilt. [-18000]
I have found many articles about this problem but they all seem to assume that you can successfully start Outlook then you rebuild the database to fix data corruption in Outlook.
What if I Outlook never completes startup?Here are the steps that solved the Outlook data corruption problem.
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook/your-datab ase-could-not-be-rebuilt/5caff467-3ab2-464a-9fe6-00ad913b5f2e
The question was: Your database could not be rebuilt
The key is to create a new Outlook Identity, remove the database file, then copy your data records into the new identity and use the Outlook database utility to rebuild the database.
It's a wonderful feeling to see Outlook start up successfully after a few days of downtime! -
Is Anyone Having Problems with the newer version of Firefox?
I still have my older Mac OsXv10.4 Tiger software. I wasn't exactly happy with Safari browser as it would block many sites and were considered incompatible so I downloaded the free Firefox browser (the 2.0 version) of which I STILL have. I'm aware that there is a much newer version and would like to download that, but I've heard a lot of people saying they have been having severe problems with it, but then they have PCs and not Macs.
So my question is for you Mac users that use Firefox, have you had major problems with the newer version? I'm real hesitant to download if I'm going to have the same problem PC users are having...like constantly crashing. Also would my old Tiger software be compatible? I don't want to upgrade to Leopard.Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.
-
Problem with the GridBagLayout Manager
Hello i am new to Java Swing and i am facing a problem with the GridBagLayout layout manager . the code in question is attached. First compile and run the code. It will execute w/o probs . Then go to the "Console" tab. There the diff components (6 buttons and 1 text area) are haphazardly arranged where as all measures where taken to prevent it in the code. The GridBagLayout manager for this tab is not working properly please help.
The code in question:-
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class MainForm extends JFrame{
JTabbedPane jtp = new JTabbedPane();
Container generalContainer; // container for the general pane
Container consoleContainer; // container for the console pane
GridBagLayout consoleLayout = new GridBagLayout(); // GridBagLayout for the console
GridBagConstraints consoleConstraints;// GridBagConstraints for the console
public MainForm()
super("Welcome to Grey Griffin -- Network Simulator");
setSize(700,600);
setDefaultCloseOperation(EXIT_ON_CLOSE);
JPanel generalPane = new JPanel();
generalPane.setLayout(new BoxLayout(generalPane, BoxLayout.Y_AXIS));
JPanel consolePane = new JPanel();
consolePane.setLayout(new BoxLayout(consolePane, BoxLayout.Y_AXIS));
JPanel designPane = new JPanel();
designPane.setLayout(new BoxLayout(designPane, BoxLayout.Y_AXIS));
JPanel outputPane = new JPanel();
outputPane.setLayout(new BoxLayout(outputPane, BoxLayout.Y_AXIS));
//Setting up Layout for all the tabs
//for general tab
FlowLayout layout= new FlowLayout();
generalContainer = generalPane;
layout.setAlignment(FlowLayout.CENTER);
generalContainer.setLayout( layout );
//for console tab
consoleContainer = consolePane;
consoleConstraints = new GridBagConstraints();
// *******Finished********
//********** All buttons text areas are declared here**********
//*******for the general tab**********
JButton generalCreate = new JButton("Create a New Network");
JButton generalOpen = new JButton("Open an Existing Network");
JButton generalSave = new JButton("Save the Network");
JButton generalSaveAs = new JButton("Save As..........");
JButton generalExit = new JButton("Exit");
//******END******
//*******for the console tab
//text area
JTextArea consoleCode = new JTextArea();
consoleCode.setEditable(true);
consoleCode.setMaximumSize(new Dimension(700,400));
consoleCode.setAlignmentX(0.0f);
//text area complete
//*******for the Console tab**********
JButton consoleCompile = new JButton("Compile Code");
JButton consoleSimulate = new JButton("Simulate Code");
JButton consoleReset = new JButton("Reset");
JButton consoleOpen = new JButton("Open script files");
JButton consoleSave = new JButton("Save script files");
JButton consoleConvert = new JButton("Convert Script files to graphical form");
//***************END****************
//Adding buttons and text areas to there respective tabs
// for the general tab
generalContainer.add(generalCreate);
generalContainer.add(generalOpen);
generalContainer.add(generalSave);
generalContainer.add(generalSaveAs);
generalContainer.add(generalExit);
//****END****
// for the console tab
consoleConstraints.fill = GridBagConstraints.BOTH;
addComp(consoleOpen,0,0,1,1);
consoleConstraints.fill = GridBagConstraints.BOTH;
addComp(consoleSave,1,1,1,1);
consoleConstraints.fill = GridBagConstraints.BOTH;
addComp(consoleConvert,1,2,1,1);
consoleConstraints.fill = GridBagConstraints.BOTH;
addComp(consoleCode,1,0,3,1);
consoleConstraints.fill = GridBagConstraints.BOTH;
addComp(consoleCompile,2,0,1,1);
consoleConstraints.fill = GridBagConstraints.BOTH;
addComp(consoleSimulate,2,1,1,1);
consoleConstraints.fill = GridBagConstraints.BOTH;
addComp(consoleReset,2,2,1,1);
//****END****
// adding the tabs
jtp.addTab("General",null,generalPane,"Choose General Options");
jtp.addTab("Design",null,designPane,"Design your own network!!");
jtp.addTab("Console",null,consolePane,"Type commands in console for designing");
jtp.addTab("Output",null,outputPane,"View output");
getContentPane().add(jtp, BorderLayout.CENTER);
//****END****
//This method is used to ad the buttons in the GridBagLayout of the Console tab
private void addComp( Component c,int row,int column,int width,int height)
// set gridx and gridy
consoleConstraints.gridx=column;
consoleConstraints.gridy=row;
//set gridwidth and grid height
consoleConstraints.gridwidth=width;
consoleConstraints.gridheight=height;
//set constraints
consoleLayout.setConstraints(c,consoleConstraints);
consoleContainer.add(c);
class TabManager implements ItemListener
Component tab;
public TabManager(Component tabToManage)
tab = tabToManage;
public void itemStateChanged(ItemEvent ie)
int index=jtp.indexOfComponent(tab);
if (index!=-1)
jtp.setEnabledAt(index,ie.getStateChange()== ItemEvent.SELECTED);
MainForm.this.repaint();
public static void main(String args[])
MainForm form = new MainForm();
form.setVisible(true);
}Thanks for the suggestions. I did away with the GridBagLayout Altogether :-D
and put all the buttons in a seperate JPanel and added that JPanel into the Console tabs container which was using a BorderLayout this time. Take a look
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class MainForm extends JFrame{
JTabbedPane jtp = new JTabbedPane();
public MainForm()
super("Welcome to Grey Griffin -- Network Simulator");
setSize(800,600);
setDefaultCloseOperation(EXIT_ON_CLOSE);
JPanel generalPane = new JPanel();
generalPane.setLayout(new BoxLayout(generalPane, BoxLayout.Y_AXIS));
JPanel consolePane = new JPanel();
consolePane.setLayout(new BoxLayout(consolePane, BoxLayout.Y_AXIS));
JPanel designPane = new JPanel();
designPane.setLayout(new BoxLayout(designPane, BoxLayout.Y_AXIS));
JPanel outputPane = new JPanel();
outputPane.setLayout(new BoxLayout(outputPane, BoxLayout.Y_AXIS));
//Setting up Layout for all the tabs
//**for the general tab
Container generalContainer;
FlowLayout layoutGeneral= new FlowLayout();
generalContainer = generalPane;
layoutGeneral.setAlignment(FlowLayout.CENTER);
generalContainer.setLayout( layoutGeneral );
//**for the console tab
Container consoleContainer;
consoleContainer = consolePane;
consoleContainer.setLayout(new BorderLayout() );
//Creating buttonpanel for adding the buttons
JPanel buttonPanel1 = new JPanel();
buttonPanel1.setLayout(new GridLayout(1,3));
JPanel buttonPanel2 = new JPanel();
buttonPanel2.setLayout(new GridLayout(1,3));
// All buttons / text areas / images are declared here
//**Buttons for the general tab**//
JButton generalCreate = new JButton("Create a New Network");
JButton generalOpen = new JButton("Open an Existing Network");
JButton generalSave = new JButton("Save the Network");
JButton generalSaveAs = new JButton("Save As..........");
JButton generalExit = new JButton("Exit");
//declaring the buttons
JButton consoleCompile = new JButton("Compile");
JButton consoleRun = new JButton("Run");
JButton consoleReset = new JButton("Reset");
JButton consoleOpen = new JButton("Open script files");
JButton consoleSave = new JButton("Save script files");
JButton consoleConvert = new JButton("Convert Script files to graphical form");
//declares the textarea where the code is written
JTextArea consoleCode = new JTextArea();
consoleCode.setEditable(true);
consoleCode.setMaximumSize(new Dimension(500,600));
consoleCode.setAlignmentX(0.0f);
//Adding buttons and text areas to there respective tabs
//**Buttons and text pads for the general tab**
generalContainer.add(generalCreate);
generalContainer.add(generalOpen);
generalContainer.add(generalSave);
generalContainer.add(generalSaveAs);
generalContainer.add(generalExit);
//adding buttons to the button panel 1
buttonPanel1.add(consoleOpen);
buttonPanel1.add(consoleSave);
buttonPanel1.add(consoleConvert);
//adding buttons to the button panel2
buttonPanel2.add(consoleRun);
buttonPanel2.add(consoleReset);
buttonPanel2.add(consoleCompile);
//adding button panels and textarea
consoleContainer.add(buttonPanel1,BorderLayout.NORTH);
consoleContainer.add(consoleCode,BorderLayout.CENTER);
consoleContainer.add(new JScrollPane(consoleCode));
consoleContainer.add(buttonPanel2,BorderLayout.SOUTH);
//adding the tabs
jtp.addTab("General",null,generalPane,"Choose General Options");
jtp.addTab("Design",null,designPane,"Design your own network!!");
jtp.addTab("Console",null,consolePane,"Type commands in console for designing");
jtp.addTab("Output",null,outputPane,"View output");
getContentPane().add(jtp, BorderLayout.CENTER);
class TabManager implements ItemListener
Component tab;
public TabManager(Component tabToManage)
tab = tabToManage;
public void itemStateChanged(ItemEvent ie)
int index=jtp.indexOfComponent(tab);
if (index!=-1)
jtp.setEnabledAt(index,ie.getStateChange()== ItemEvent.SELECTED);
MainForm.this.repaint();
public static void main(String args[])
MainForm form = new MainForm();
form.setVisible(true);
} -
i have 3 computers. i want to get files from one to another. it doesn't work, i think it is a problem with the apple id?
Roger:
Zugriffsrecht means Access Right according to the translators.
martinamm:
You can't do what you want with iCloud. You will need to setup remote access to your main computer with VPS or some similar remote access application. With VPS you have an application running on your main computer turning it into a server and an client app on your laptop so you can access it remotely. There are many such apps out there, some probably more feature filled than VPS. You might post in the system forum that you're running and ask there.
OT -
My Client is having a serious problem with the Contact Form Widget
My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later. -
I cant cant use mail merge feature in Winword in conjunction with Abobe Acrobat 10 (pdfmaker add-in) after the recent Office April Windows and Office Updates.
Here is a quick note from the event viewer:
The program WINWORD.EXE version 14.0.7134.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1138
Start Time: 01d07dcede19c458
Termination Time: 15
Application Path: C:\Program (file:///C:/Program) Files (x86)\Microsoft Office\Office14\WINWORD.EXE
Report Id:
Microsoft Word: Accepted Safe Mode action : Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. If you have seen this message multiple times, you should disable
this add-in and check to see if an update is available. Do you want to disable this add-in?.
I do not wish to disable the pdfmaker add-in as I use it to run mail merge on WORD and send 10s and 1000s of pdfs via email to external users. I am not sure what are my options here and I wish
someone could help me get to the root cause of the matter.
My environment is as follows:
Windows 7 x64 SP1
Office 2010 v 14.0.7128.5000
Adobe Reader MUI X and Adobe Acrobat X
FerozeHi,
As the event log indicated, this is due to acrobat pdfmaker office com addin doesn't work well with Microsoft Word.
I would suggest you go ahead and try to upgrade your Adobe product to the latest version and see if issue persists.
Or contact the support of Adobe and see if there is a known compatibility issue or not.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Maybe you are looking for
-
KM Scheduler Service Properties
Hello experts. I am trying to build a scheduler service in KM that runs an RFC, retrieves some data and stores it into KM once a day. To do this, I tried starting with JCA but that did not work so I ended up using the IConnectionFactory framework and
-
Open link in object link for calling sap R/3 Transaction.
Hi all, Can anyone help with the steps to be done in order to call an SAP Transaction in cProjects via services to Object Links. We succeeded to get the object links from R/3, we are able to see the 'open' link under 'Application' in the Object Lin
-
No Audio comes from my Elitebook 6930p when i connect it to the USB Docking Station
When ever i connect my Elitebook 6930p to the USB Docking Station, the Audio from my Laptop does not come. The Audio works very well, without the USB Connected. Looks like the Docking station is bringing the Audio out through its own ports, to be con
-
Hello.. I'm unable to find /B10/Q16sendxmldatatobw_rfc in IB. Do i need to perform any configuration for integration between XI and BW? Thanks..
-
Can you format multiple text boxes at once-over 100? I need to format many text boxes to "number" with .00