Problems with the floating lens.
Hello Nokia,
My Lumia 920 has a very wierd problem with the floating lens. When I tilt the device up it blurrs the image for a sec or two and it makes a squirk sound which also records on the footage.
Here is a video made with my Lumia 920.
http://youtu.be/jlzzOBlAT6Q
I sent my phone for a replacement, but I just wanted to let you know that this could happen and maybe stimulate those little chinese people in your factories to do a better job.
Hello Nokia,
My Lumia 920 has a very wierd problem with the floating lens. When I tilt the device up it blurrs the image for a sec or two and it makes a squirk sound which also records on the footage.
Here is a video made with my Lumia 920.
http://youtu.be/jlzzOBlAT6Q
I sent my phone for a replacement, but I just wanted to let you know that this could happen and maybe stimulate those little chinese people in your factories to do a better job.
Similar Messages
-
Problem with the AF of my new 18-135mm EFS IS STM lens
Hello,
The lens came with the EOS Rebel T5i bundle.
The auto focus is working incorrectly, focusing closer than the detected area. This is happening when I use the viewfinder. When a picture is taken using the “direct view” (LCD display) it focus correctly.
I didn’t use the camera a lot since I bought it, now looking the first pictures I see that this problem is happening since I bought it.
I changed the zoom lens with another Canon camera and then my new Rebel T5i works fine and the same problem happens with the other camera, therefore I’m sure that the problem is in the lens and not in the camera body.
The out of focus is more noticeable when I'm taking pictures in 18mm position to an object farther than 2 meters but it is happening in any zoom position. It is clear when I compare the same picture taken with the viewfinder with one taken with the LCD Display.
I updated the body firmware and the problem continues.
Is it possible to update the lens firmaware? I couldn’t find them in the canon webpage.
I will go into an important trip next week, therefore I will not have time to send the camera to repair.
Any idea?
Thanks!You may want to rent a lens for your trip and get this lens to service.
You'll want to be sure it really is a problem with the lens (it sounds like it is from your description). Test the lens against a "flat" target (such as a wall). You can hang something on the wall with high-contrast (newspaper works great) and put the camera on a tripod. The idea is that (a) the camera is definitely not moving, (b) the focus target is definitely not moving, and (c) the target is flat and there are no distracting objects in the field of view so it's not possible for the focus system to decide to lock focus on anything OTHER than your intended target.
Next... deliberately turn the focus ring to put the camera out of focus (so that the camera HAS to move the focus). This is mildly tricky with an STM lens since there's no mechanical link from the focus ring to the lens -- it's electronic. The lens only accepts focus input when focus is active (e.g. half-press the shutter button, etc. to wake it up.) I run focus all the way in and test several times, then run focus all the way out and test several times (that way it has to move focus in both directions.)
If the lens is consistently focusing closer, then it will need service.
Tim Campbell
5D II, 5D III, 60Da -
Is anyone else having problems with the Canon Online Store?
In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store. They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
Is anyone else having problems with the Canon Online Store?
Why does Canon not care to track reported problems with the storefront part of their web-site?
I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far. Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not. In trying to register that lens, I looked up on the Canon web site where to find the serial number. Since my new lens did not have any numbers there, I was concerned I had been sold a fake. But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was.
Is Canon like that with other problems, as well? Or is their "batting" average better than my very limited experience?
I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral": EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)!
Regards and Thanks,
Calen
As an old friend used to always say,
"Keep Looking Up!"
CalenHi Danny. Thanks for replying.
I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years. And, yes, it is the latest version. Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT? WHEN did Canon STOP SUPPORTING Firefox?
I've been told that there are 2 pending orders in my account. Yet, I NEVER placed those orders! WHY CAN'T CANON SEE THAT THIS IS A PROBLEM???
Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place! But, maybe that's a bit too grown up of an answer for you!
"Award-winning" support??? And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS??? The OSTRICH?
Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
Thank you for your "prompt" attention to this matter!
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen -
Every time I try to open photoshop I get a window that pops up and says:
"Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software.
GPU enhancements can be enable in the Performance panel of Preferences."
Then windows shuts the program down. The details of the problem are:
"Files that help describe the problem:
C:\Users\Owner\AppData\Local\Temp\WER70AD.tmp.WERInternalMetadata.xml
C:\Users\Owner\AppData\Local\Temp\WER9389.tmp.appcompat.txt
C:\Users\Owner\AppData\Local\Temp\WER9407.tmp.hdmp"
I'm on a custom Asus
I'm using Win7 Home Premium 64-bit
16GB RAM
Nvidia Geforce GTX 560 2GB video card
Intel i7 core 2.2 GHz
12 GB of memory
The error happens so quickly that I don't have time to do anything. Please help. >.< I've been on hold for *checks phone* 2 hours exactly. Wow. It is a legit copy and was working last month with no trouble. I've updated the drivers and tried a few solutions that have worked for other people that I found on Google (such as disabling CUDA and setting my "power management mode" to "prefer maximum performance" on my video card) but so far nothing has worked.
Thanks in advance!It has stopped crashing because somehow it turned off "Enable GL Drawing" on its own because I could never even get a menu open. Not sure how it did that but I am grateful. I still get the error when I open Photoshop up but at least it hasn't crashed yet. At the time when it was crashing I never would have been able to get you the system info due to the speed that it was crashing upon just opening the program. In case you still need it:
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 8
Processor speed: 2394 MHz
Built-in memory: 16361 MB
Free memory: 13322 MB
Memory available to Photoshop: 14694 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: False.
OpenGL Crash File: Detected.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 560M/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 560M
Driver Version: 9.18.13.697
Driver Date: 20121002000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 560M
Video Card Memory: -2047 MB
Serial number: 92628077745082451425
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\
Temporary file path: C:\Users\Owner\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 931.4G, 511.4G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2010/12/13-23:37:10 64.449933 64.449933
adbeape.dll Adobe APE 2011/01/17-12:03:36 64.452786 64.452786
AdobeLinguistic.dll Adobe Linguisitc Library 5.0.0
AdobeOwl.dll Adobe Owl 2010/06/03-13:43:23 3.0.93 61.433187
AdobeOwlCanvas.dll Adobe Owl Canvas 3.0.68 61.2954
AdobePDFL.dll PDFL 2010/12/13-23:37:10 64.341419 64.341419
AdobePIP.dll Adobe Product Improvement Program 5.5.0.1265
AdobeXMP.dll Adobe XMP Core 5.0 64.140949
AdobeXMPFiles.dll Adobe XMP Files 5.0 64.140949
AdobeXMPScript.dll Adobe XMP Script 5.0 64.140949
adobe_caps.dll Adobe CAPS 4,0,42,0
adobe_OOBE_Launcher.dll Adobe OOBE Launcher 2.0.0.36 (BuildVersion: 2.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
AFlame.dll AFlame 2011/01/10-23:33:35 64.444140 64.444140
AFlamingo.dll AFlamingo 2011/01/10-23:33:35 64.436825 64.436825
AGM.dll AGM 2010/12/13-23:37:10 64.449933 64.449933
ahclient.dll AdobeHelp Dynamic Link Library 1,6,0,20
aif_core.dll AIF 2.0 53.422628
aif_ogl.dll AIF 2.0 53.422628
amtlib.dll AMTLib (64 Bit) 4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
amtservices.dll AMTServices (64 Bit) 4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
ARE.dll ARE 2010/12/13-23:37:10 64.449933 64.449933
asneu.dll AsnEndUser Dynamic Link Library 1, 7, 0, 1
AXE8SharedExpat.dll AXE8SharedExpat 2011/01/10-23:33:35 64.436825 64.436825
AXEDOMCore.dll AXEDOMCore 2011/01/10-23:33:35 64.436825 64.436825
Bib.dll BIB 2010/12/13-23:37:10 64.449933 64.449933
BIBUtils.dll BIBUtils 2010/12/13-23:37:10 64.449933 64.449933
boost_threads.dll DVA Product 5.0.0
cg.dll NVIDIA Cg Runtime 2.0.0015
cgGL.dll NVIDIA Cg Runtime 2.0.0015
CoolType.dll CoolType 2010/12/13-23:37:10 64.449933 64.449933
data_flow.dll AIF 2.0 53.422628
dvaadameve.dll DVA Product 5.0.0
dvacore.dll DVA Product 5.0.0
dvaui.dll DVA Product 5.0.0
ExtendScript.dll ExtendScript 2011/01/17-17:14:10 61.452840 61.452840
FileInfo.dll Adobe XMP FileInfo 5.0 64.140949
icucnv36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
icudt36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
image_flow.dll AIF 2.0 53.422628
image_runtime.dll AIF 2.0 53.422628
JP2KLib.dll JP2KLib 2010/12/13-23:37:10 64.181312 64.181312
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1263
MPS.dll MPS 2010/12/13-23:37:10 64.450375 64.450375
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.4940
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.4940
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.4940
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS5.1 CS5.1
Plugin.dll Adobe Photoshop CS5 CS5
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 2.5.0.232
PSArt.dll Adobe Photoshop CS5.1 CS5.1
PSViews.dll Adobe Photoshop CS5.1 CS5.1
SCCore.dll ScCore 2011/01/17-17:14:10 61.452840 61.452840
tbb.dll Threading Building Blocks 2, 1, 2009, 0201
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 2.0.0.15
WRServices.dll WRServices Thursday January 21 2010 12:13:3 Build 0.11423 0.11423
wu3d.dll U3D Writer 9.3.0.113
Installed plug-ins:
3D Studio 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Accented Edges 12.0
ADM 3.11x01
Angled Strokes 12.0
Average 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Bas Relief 12.0
BMP 12.0.2
Camera Raw 6.7
Chalk & Charcoal 12.0
Charcoal 12.0
Chrome 12.0
Cineon 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Collada 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Color Halftone 12.0.2
Colored Pencil 12.0
CompuServe GIF 12.0.2
Conté Crayon 12.0
Craquelure 12.0
Crop and Straighten Photos 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Crop and Straighten Photos Filter 12.0.2
Crosshatch 12.0
Crystallize 12.0.2
Cutout 12.0
Dark Strokes 12.0
De-Interlace 12.0.2
Dicom 12.0
Difference Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Diffuse Glow 12.0
Displace 12.0.2
Dry Brush 12.0
Eazel Acquire 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Embed Watermark 4.0
Entropy 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Extrude 12.0.2
FastCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Fibers 12.0.2
Film Grain 12.0
Filter Gallery 12.0
Fresco 12.0
Glass 12.0
Glowing Edges 12.0
Google Earth 4 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Grain 12.0
Graphic Pen 12.0
Halftone Pattern 12.0
HDRMergeUI 12.0
IFF Format 12.0.2
Ink Outlines 12.0
JPEG 2000 2.0
Kurtosis 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Lens Blur 12.0
Lens Correction 12.0.2
Lens Flare 12.0.2
Lighting Effects 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Liquify 12.0.1
Matlab Operation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Maximum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Mean 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Measurement Core 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Median 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Mezzotint 12.0.2
Minimum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
MMXCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Mosaic Tiles 12.0
Multiprocessor Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Neon Glow 12.0
Note Paper 12.0
NTSC Colors 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Ocean Ripple 12.0
OpenEXR 12.0.2
Paint Daubs 12.0
Palette Knife 12.0
Patchwork 12.0
Paths to Illustrator 12.0.2
PCX 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Photocopy 12.0
Photoshop 3D Engine 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Picture Package Filter 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Pinch 12.0.2
Pixar 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Plaster 12.0
Plastic Wrap 12.0
PNG 12.0.2
Pointillize 12.0.2
Polar Coordinates 12.0.2
Portable Bit Map 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Poster Edges 12.0
Radial Blur 12.0.2
Radiance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Range 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Read Watermark 4.0
Reticulation 12.0
Ripple 12.0.2
Rough Pastels 12.0
Save for Web & Devices 12.0
ScriptingSupport 12.1
Shear 12.0.2
Skewness 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Smart Blur 12.0.2
Smudge Stick 12.0
Solarize 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Spatter 12.0
Spherize 12.0.2
Sponge 12.0
Sprayed Strokes 12.0
Stained Glass 12.0
Stamp 12.0
Standard Deviation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Sumi-e 12.0
Summation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Targa 12.0.2
Texturizer 12.0
Tiles 12.0.2
Torn Edges 12.0
Twirl 12.0.2
U3D 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Underpainting 12.0
Vanishing Point 12.0
Variance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Variations 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Water Paper 12.0
Watercolor 12.0
Wave 12.0.2
Wavefront|OBJ 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
WIA Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Wind 12.0.2
Wireless Bitmap 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
ZigZag 12.0.2
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Access CS Live
CS Review
Installed TWAIN devices: NONE -
CSS problem with the clear property
This is my actual page
http://www.martcol.co.uk/abba/
and I want to swap the paragraphs around. This is what I come up
with
http://www.martcol.co.uk/abba/test/test01.php
I reckon I am getting muddle with the whole clearing the
float thing.
Many thanks
Martin
Actually, I think it only breaks up in Firefox - bear in mind
I only tested in IE6 and FFhttp://martcol.co.uk/abba/pages/patch.php
Oh dear, another problem with my floated elements and the
clear property....
Martin
I think I have this now. Not sure why but picking away at it
has it fixed. -
Programming problems with INT / FLOAT
I got a problem with datatypes float and int.
I'm just developing a c-program on HP-UX with the gcc-compiler. 'cause i have not ever been done an ORACLE-access before, i has started with the "cdemo2.c" - example from the oracle-demo-dircetory in version 8.0.4.
in the DB there's a column with NUMBER-TYPE, but when i call the oci-function (or what ever it is) "odescr()", the variable "scale" (which is supposed to differentiate between FLOAT_TYPE and INT_TYPE) always is set to "0". this variable should be set to anything else but "0" if a FLOAT_TYPE is detected, but it isn't.
what I do wrong ???
How can I know the exact datatype, when a NUMBER_TYPE in the DB appears ???
if there is a better way to realize an oracle-access in C, please don't wait to tell it to me
many thanks
nullYou basically got it. Another approach is to always work on the rightmost digit; that way you'll always be dividing, mod'ing, or multiplying by 10.
You don't need to know the length of anything to use a for loop. Remember that a for loop has 4 parts: the initialization, the conditional, the "update", and the body. (There are probably more correct names for these that I can't recall right now.) The conditional and the update tend to be length checks and increments only because for loops are commonly used over arrays or strings, but they don't have to be.
Another hint: how do you know when you're done pulling the digits out of the source number? What is the value of the source number when you're done? -
Nokia N85, and my problems with the Nokia N96
Hi there,
First of all, i have both phones (after buying the n85, because of issues with the N96), when i go to send a large file from the n96 to the n85 via bluetooth, it wont allow it as it says not enough memory, it seems that you can only send, what free memory your phones internal system has, im deeply confused as the video im sending is over 88mb, and was passed down from my previous nokias without any problems whats so ever, any ideas anybody??????
Secondly i feel a fool, as i bought like i said the n85 because of the problems with the and i quote" flagship model n96".... well, i can honestly say, ive wasted my money, because after installing the newest firmware 11 on it, it has since been running like a dream, albeit like it should have done last month, but i musnt grumble, now i need to decide which one to put on an auction site.
ps the n96 was bought with 3 network, the other from an auction site, both work fantastically well with the 3 network.
ashtonHi, beg to differ, I would sell the 96. The 85 is far better,OLED screen; a battery that lasts for days not hours; FM transmitter for when you are in your mates car who doesn't have a bluetooth radio; it breathes!!! is sleeker and of course it has a lens cover, for crying out loud why didn't they fit one to the 96!
-
Has anyone else experienced compatibility problems with the Tamron SP 70-300MM?
Is the lensora report based on actual testing... or merely theoretical?
I'm wondering ... because there's a well-established history of 3rd party lenses that should be compatible based on the mount, but have problems anyway when a new camera model is introduced that did not exist when the lens was designed.
At the same time, if you contact the lens vendor for support, they may be able to provide better data and sometimes they can re-chip or re-flash firmware into the lens to upgrade it to a compatible state.
Tim Campbell
5D II, 5D III, 60Da -
Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?
The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.) -
I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.
Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?
-
I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
Having Problems With The Neo2 ? Read This!!!!
Hi,
i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
Well, having probs with you're NEO2 ??
remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
Regards,
Welcome to the real world NEO :DOk.....
i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
Whatever i do, i can't make the mobo crash in anything but games!
Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-10-04 02:02:53
TimeZone: -60 - West-Europa (standaardtijd)
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 9
Shutdown: 0
EaRecovery: 1
EventCount: 2
BreakCount: 2
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: RADEON 9700 PRO
HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6378
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2
I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
Regards,
The real world -
Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.
This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck
-
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html
Maybe you are looking for
-
I have to include a function in a view. I want to create a new column in a view which is the output of this function. Can I do it. I am new to using functions..any sample code is appreciated..
-
Strobing Screen on MBA (all brightness levels)
I seem to have gotten a Mac with all of the above. Losing WiFi connection, and not being able to turn WiFi back on. Screen randomly going black after sleep And now the new addition to the list: Screen flickering at approx 25 frames per second on all
-
Help with RFKPYL00_MASS program/payment run transaction
program RFKPYL00_MASS is for payment run transaction. transactional record is t_payh / i_payh with structure PAYH. In this program i see the statement GET PAYH. I need to know from which table the data is populated to this structure/t_payh especi
-
The create facility in iPhoto is pretty basic for cards & books etc. - how can I download something like MS Publisher for my Mac Air?
-
I created a website with iWeb and now I have forgotten what web host I signed up with. How can I find out? The website is still working.