Problems with the Headset SBH80 of Sony

With OS X Yosemite ver 10.10.3 (14D131) The Headset SBH80 of Sony distorted like speakers being played too loudly or blown out, but this distortion is present at all volumes levels with the headset.  The problem is less present when someone speaks softly.
Someone has the same problem?
In the same form this Headset has problem with  other devices of Apple like iPhone 6 iOS8.3 and Mini iPad2.
When I connected it with other devices different of Apple sound great without problem. Only with Apple's devices has the problem, why?
Thanks a lot.

Hi
please try two things.
1) factory reset
if that does not help
2) format the mass memory.
before doing factory reset, please do back up your of your personal data to a memory card or Ovi suite.

Similar Messages

  • HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

      I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • Problem with the headset jack

    I am unable to play audio in the earpiece in notebook c55-b5201. the notebook does not recognize the headset. the devices menu sound reproduction does not appear the option of the headset. I already installed and uninstalled the driver and the problem still remains

    If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
    - Peter

  • Problems with logitech headset

    Hey guys I was just playing Call of Duty 4 the other day, using my Logitech headset on Mountain Lion 10.8.3. But when I updated to 10.8.4 the sound from the game just completely stuffed up. The music is OK but all other sound is gone. The only other sound I can hear is what appears to be voice chat coming from the right headphone but it is very, incredibly soft and you an barly hear it. Although the sound is fine when I use the built-in speakers. Is there a problem with the headset or is it just the software in Call of Duty 4?

    Hi,
    As it has been so long I reread the topic.
    I am now confused though.
    In the first post you said
    ... It works fine with Skype, but when using iChat, there is no microphone pick up. I have set the audio settings to the USB headset in both the System preferences for my iMac and for the iChat preferences; ...
    From that I went on to say set the iChat bits to anything else then set System Preferences > Sound > Input and then reset iChat to the Headset Mic option.
    You then said it was the Output (incoming Audio) that you could not hear.
    I suggested the same technique be applied to the iChat Output options/System Preferences > Sound > Output with iChat again being Set "Last".
    You have replied that you have set the preferences in both places but not to the order in which you did them (this is the important bit).
    I have seen one post that suggests that Output to the Headset should be done before the Mic/Input settings but did view this with a deal of scepticism.
    Also even though you have no MIDI device can you Open Audio MIDI Set up in Applications/Utilities and see what sample rate the Headset is using for Input (Mic) and Output.
    Ideally iChat seems to prefer 44100
    You may also notice here that you have different controls over the volume.
    Is it Mic/Input (your Outgoing Audio) or Incoming Audio/Output to Headset that is the issue ?
    8:52 PM Tuesday; June 22, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
    Message was edited by: Ralph Johns (UK)

  • When downloading from a Sony minidisc video camera, the picture is downloading but without sound.  Previously, it had downloaded successfully both sound and picture.  I have subsequently upgraded to Lion X (10.7.4).  Is there some problem with the driver?

    When downloading from a Sony minidisc video camera, the picture is downloading but without sound.  Previously, it had downloaded successfully both sound and picture.  I have subsequently upgraded to Lion X (10.7.4).  Is there some problem with the upgrade which is affecting the transfer?  Is there a way of resolving this?

    When you have kernel panics, the pertinent information is in the panic report.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • I have a problem with the external sound of my ipod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

    I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

    - Try insering and removing the headphone plug a dozen times or so.
    - Try cleaning out the headphone jack in the iPod.
    - Resett he iPod. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restoe to factory defaults/new iPod
    If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
    If not underwarranty Apple will only exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following is less expensive. Here is one. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Was the general problem with the bluetooth headset solved in the new ios 5 or in the new iphone 4s

    was the general problem with the bluetooth headset solved in the new ios 5 or in the new iphone 4s ?
    thank you greatly
    also i would like to know what are the diffrences with the bluetooth 4.0 vs 2.1
    ( the bluetooth headset i was thinking of is jawbone icon series thinker black )

    Hi,
    I had HUGE issues with a BlueAnt Q2 on the 4, and after five exchanges, I had to get rid of the phone becuase the Apple store admited that they had "some bluetooth issues."
    I still have the Q2, and I was wondering the same thing becuase I realy want an iphone.

  • My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using.

    My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using. I use a cheap Logitech Stereo Headset H130, but since there is only on audio plugin on the computer, I purchased a 3.5 mm 4-pin smartphone audio adapter thingy. That allowed me to put both my the sound coming to my headset & the microphone on my headset onto one wire. Everything worked wonderfully when running the Mac OS since they probably have support for that kind of stuff. The problem is though that once I try to use the same method in Windows 7, the OS doesn't recognize my headset microphone at all, but, instead when recording my voice decides to use the built-in mac microphone. Using this adapter still allows me to hear from my headset, but not use the microphone and that becomes a problem. It might be so that Windows 7 doesn't have support\drivers for that... How should I continue from here on out? Any advice?

    From what I have read from others on here you may be out of luck. You would need the appropriate Windows drivers for the Cirrus chip in the Mac and no one has been able to successfully locate them. Apple wouldn't support this since Windows is an optional install.
    Sorry to bring the bad news.

  • N73 problem with the usb cable

    so, i have a problem with the connectivity of my usb
    when i plug the cable to my pc or any pc it said "USB device Not Recognize"
    this happen since i use my headset often than before, is that take effect?
    or when i use card reader to transfer all file from my phone to pc, the card reader can't read the memory card.
    so is there anyone know  how to solved it?
    i dont want to take my phone to Nokia Care, i dont believe Nokia Care in my town.

    It looks like your memory card is corrupted. Reformat the card. Did you try another USB port?
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • C2-00 Problem with Bluetooth headset

    I use it for a week and have a problem with bluetooth headset.
    When I finish a call my mobile is stop working.
    The only way to get it back is remove a battery.
    I try to use other bluetooth headset but it have the same problem.
    Please help me to fix this problem.
    Thank you.

    conceivably, yes, that is how its supposed to work
    i was just wondering if there was a way to turn it off somehow, so as to only enable the bluetooth for calls and not for all audio. unpairing and pairing the bluetooth definitely works, but it just seems like overkill everytime i want to anything regarding sounds (asise from calls)
    thanks,
    vasilis

  • Im having problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes  I'm getting cut edges in the video , does anyone have any idea ?

    Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes  I'm getting cut edges/lines  in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
    does anyone have any idea ?
    Thanks in advence ...

    Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
    For now, I'll assume you're shooting 1080i.
    Take a representaive clip  into a new sequence. Add a title.
    In your sequence, make sure field dominance is set to Upper.
    Set render settings to Pro Res 422.
    After rendering, export QT self contained.
    Import into Compressor (I'm now referring to v3.5).
    Select the 90 minute Best quality DVD preset.
    Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
    Submit burn and check quality on TV.
    Good luck.

  • Problem with speakers/headset working together

    I'm trying to set it up so all my sound comes through the speakers except for Ventrilo, which would come through the headset. The mic on the headset is working fine, and there are no problems with the speakers at all. The only problem is getting only Ventrilo to come through on the headset.

    Hi,
    Try the following.
    Download the Conexant HD Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45166.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the Conexant device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the Conexant installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I have a problem with the audio

    Hi, i am from Venezuela, i don't to speak very well the english, i  hope your can understand me.
    My computer is a HP 15 Notebook  PC 15-f039wm and this present a problem with the audio.
    It stard last month, i didn't give importanc, but lately the problem with the audio is more annoying, sound stutters and present failure in a less time by -05Seconds but everytime is more cotinued. And i was to reading in a fore and muchs person present the same problem!,  and someone published  a parcht to the problem but for a "Sony", and the parcht i don't funcione me,  can your help me?.
    Please, it is my email: [Personal Information Removed]
     Excuse the spelling, your remember that i dont know to speak english.
     

    Back up all data before making any changes.
    If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
    If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
    If there's no improvement, or if you're not aware of having installed anything that fits the description, post again.

  • Blackberry 8220 Flip Black problems with Bluetooth headsets/caller cannot hear me

    Problems with 3 headsets. Eralier it was working fine. but now I can hear the caller but the caller cannot hear me or anything from my side over the bluetooth headset. Otherwise without the headset the phone and the speakerphone work just fine. Any ideas????

    I am experiencing the same problem, started about 10 days ago. To date, I have reset network settings, and have restored to default without success.
    The weird thing with my issue I've noticed, after I go through a half dozen attempts at calling and recalling the person back, eventually, the problem goes away and the caller can hear me without issue after that. But then that may just be the 50% of the time occurrence.
    So, I wonder if this is signal related, although it has occurred in 3 different locations in the US. Or if there is some restricted, or privacy policy that is related to AT&T regarding my account when calling. Kind of like being on a no fly list?
    However, I can't continue with this happening, everyone says I am give Steve Jobs a bad name, so its to the genius bar or whatever they call it these days, I am heading.

  • Problem with my headset - right side: cannot hear anything

    Hello
    I have a macbook air and i plugged in a headseat today but I've noticed that the right side of my headset is not working. I cannot hear anything.
    I made some tests and tried several different headsets and I realised it is always a problem with the right side. When I try any headset with my mac book air, I've noticed that I could not hear anything at my right ear.
    Then I made another test, and I used the same headset and in other devices like my iphone for example. I've noticied that I can hear everything at both sides, so nothing is wrong with the headsets.
    It seems to me that there is a problem with my computer. How do I go about solving this issue?
    Is there both left and right sound boxes in my mac book air? I am asking this because I cannot see any sound boxes in my macbook air and therefore I wonder if there may be a problem with the right side of my sound box? Can this be possible?
    Appreciated quick replies.
    Tks,
    Debora

    System Preferences > Sound > Output > Internal Speakers/Headphone
    Settings for the selected device:
    Balance:
    Make sure that the slider is set at middle.

Maybe you are looking for