Problems With the High Availability
Hi all,
First of all, i'm sorry for my "bad" english, but i will to try to explain my problem as clairly as i can.
I'm using VDI 3.1.1 ,a configuration "High Availability with bundled MySQL" with a primary server and 2 secondary servers.
i'm trying to test the HA for the core VDI and FailOver for the VirtualBox, The HA works but i think with a timeout (=2minutes) that i want to reduce.
I found some troubles with the VirtualBox failover.
Here is more explaination :
These Tests are done with the VRDP mode.
The first test after the installation&configuration, the failover works fine after the crash of server A, the desktops migrate and restart in the other server (the server B)
The second test : i reboot the server A, and i want to test again with shuting down the server B (crash). the desktops migrate to the server A and they are with the state "running" but SRS can't deport the display (it loops on the authentication screen) ... The VM is running and i can access to it with the Remote Desktop Connection.
When i looked to the logs, i found that the SRS is always looking for the VM on the server who crashed (Server B). I looked to the vda-client command for the user concerned and it shows me that the host is the server who crashed (Server B) with the old port. I opened the MySQL,vda database and i looked the datas on the t_desktop* table, the fields* ip-or-dns* and port *were not updated when the VMs migrates. i update the two fields with an update request with the correct host (of the server A) and the new port where the VM has migrate, and the display comes in 1s.
So, the VM migrate well, but Datas on MySQL Database were not updated.
For the WRDP mode, everything works fine, because the SRS uses the IP of the VM to deport the display, not the host and port like in VRDP mode.
I test this with different configuration :
* HA with bundled Mysql : primary server and two secondary servers. The two secondary servers contains the VDI core and the VirtualBoxes.
* HA with bundled Mysql : the 3 vdi Cores are virtualized on a server, and Two Servers with only the VirtualBoxes.
* One Server with VDI Core, and Two Servers with only the VirtualBoxes to test only the failover of virtualbox.
All of this tests gave the same results.
My questions :
1 - After a crash of a server and after reboot, is there anything to do? (i checked all the vda services "database,webservices ..." and everything is ok after the reboot).
2 - Is there a bug for the HA with the VRDP mode?
3 - Is anybody had the same problems? if yes, what is the solution?
4 - How can i reduce the timeout for the HA of VDI Core? is there any process for that?
Thank you all for your help , and again sorry for my bad english, i know i have to improve it :)
I am using VDI version 3.2. Virtualization layer is Virtuabl Box.
setup is 1 x VDI server, 2 x virtual box host , remote mysql database and shared storage backend i.e NAS
The Virtualbox session / vm does not fail over, period !
When i pull the plug on the 1st Virtualbox, all the desktops session on the down server, remains on the server
and did not failover to the other one.
Seriously , have any one managed to get the HA working ? anyone ?
see below for the cli output.
Started 1 desktop
root@vdihost-a:~[598]# vda provider-list-hosts virtualbox
NAME STATUS ENABLED CPU_USAGE MEMORY_USAGE DESKTOPS
vdi1 OK Enabled 0% (20 MHz) 10% (1.8 GB) 0
vdi2 OK Enabled 1% (310 MHz) 16% (2.6 GB) 1
Started 2nd desktop
root@vdihost-a:~[599]# vda provider-list-hosts virtualbox
NAME STATUS ENABLED CPU_USAGE MEMORY_USAGE DESKTOPS
vdi1 OK Enabled 1% (319 MHz) 17% (2.9 GB) 1
vdi2 OK Enabled 1% (327 MHz) 16% (2.6 GB) 1
AfterpPower cut to vdi2, but second desktop did not failover to vdi2, desktops count still 1, instead of 2
root@vdihost-a:~[600]# vda provider-list-hosts virtualbox
NAME STATUS ENABLED CPU_USAGE MEMORY_USAGE DESKTOPS
vdi1 OK Enabled 0% (140 MHz) 17% (2.9 GB) 1
vdi2 Unresponsive Enabled 0% (0 MHz) 0% (0 KB) 1
I really want to know if anyone has managed to get this working at all.
Similar Messages
-
The PyramidVille game in Facebook is not loading.I have no problems with the other games.I'm receiving the message" Forbidden 403" CSRF Verification failed.Request aborted. More information is available with Debug= True edit
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC) -
Bear with me please as I have never used the community before. I have an Airport Extreme 1st generation at least I think it is a 1st generation. My PC is hardwired and my Mac Pro, obviously wireless. I have 50/8 mbps service but the speeds on my PC run around 20/8 and 30/8 on the Mac. Cable says it is a problem with the airport since my PC speeds rise to 50 when the airport is disconnected. Does anyone know what to do?
The simplest way would be to perform a "soft" reset on the AEBS. This type of reset will temporarily disable all of the AEBS's passwords up to five minutes. This should give you ample time to access the AEBS with the AirPort Utility to change it.
If you don't want to actually change the password, then you can possibly retrieve the password from the OS X Keychain, as follows:
Run the Keychain Access utility found in \Applications\Utilities
In the category column (on the left side of the utilities' window), select "All Items."
In the right column look for your Network Name. It will have a "Kind" of "AirPort network password."
Double-click on your network name listing.
Click on "Show password."
Enter your Mac's administrator's password
Your wireless network's password should now be displayed. -
My iphone 4 never had a problem with the personel hotspot until 2-3 days ago .
Now when I turn the hotspot on none of my other i-devices can see it. I have tried the turn on/off thing and I have tried the complete turn off holding the 2 buttons on both the phone and the other devices (ipad x 2 and ipods x 3). This is very frustrating.
Oh and I have spoken to my carrier it is not them.
Any suggestions?Setting >> General >> Cellular >> Cellular Data Network >> Reset Setting
Restart (hold on/off button >> slide to power off)
I got same prob after update ios 6.1 (not sure during update to 6.0.1) iphone 5 -
I'm about to purchase and IPAD 2 and the net seems full of comments about problems with the IPAD2 3 G and verizon service? Is this still an issue and if so
how bad? AT&T version is very hard to find, should I get the Verizon or wait?You need to remember that these forums are like an emergency room. All the gazillions of well people don't visit the ER. Only sick people.
Same thing for this forum. Some people had problems activating their iPad 2 with Verizon. Most didn't and certainly wouldn't post here.
I would not use this as a consideration in which iPad to buy. Rather I would consider whether I might be traveling outside the US with the iPad 2. If you are, then you most certainly need the AT&T (GSM) version if you want to be able to access data without using WiFi. The Verizon iPad has no SIM card, and the technology it uses is pretty much limited to the USA. -
Problem with the new server UCS C220 for set IP to CIMC
Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regardsYou may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help -
Problem with the synchronization by Desktop Software (6.1.0.35)
Hi, i have a big problem with the synchronization by Desktop Software (6.1.0.35).
When I installed DS i set to folder sync photos not as
... Documents / BlackBerry / photo (created by default),
but i chose
... Documents / Pictures / Photos from the BlackBerry (created by me).
Basically now I try to change the import folder of images, but it appears the error that is
"Can not set a folder to import to a higher level of import folder"
I tried deleting / Photos from the BlackBerry, and not finding my DS it says:
"The import folder is not available ... etc.." and tells me to change it or with the button or the Media tab of the Device menu> Options.
I do it but the message is always the same: "Unable to set a higher level of import folder to import folder"
I find it an absurd bug and ask to help me solve it. ThanksWell folks. I've had enough.
The 9780 is a great phone, it's easy to use, practical and dependable. However, the Desktop Manager software has been giving me too many sleepless nights. On two occassions I must add: once at the end of last year when I bought it and only managed to solve it by myself after 4 weeks of trawling through online forums, blogs and other BB help sites and the recent one was last week when I tried to install it on my new Windows 7 notebook.
I know this is not entirely the fault of RIM, Microsoft also has a part to play. But considering the state of technology these days, it shouldn't have to be so difficult. I want a phone and software that makes my life easier and not have to be a slave to it by trying days and nights to solve its problems.
Hence, I have officially decom my phone and gotten an iPhone 4 instead. The switch ain't that difficult for me as I have always been platform neutral. As long it fits my needs, does it job well and doesn't give me too much headache, I'm cool with it.
Ciao folks! -
I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205) please help
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Having Problems With The Neo2 ? Read This!!!!
Hi,
i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
Well, having probs with you're NEO2 ??
remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
Regards,
Welcome to the real world NEO :DOk.....
i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
Whatever i do, i can't make the mobo crash in anything but games!
Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-10-04 02:02:53
TimeZone: -60 - West-Europa (standaardtijd)
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 9
Shutdown: 0
EaRecovery: 1
EventCount: 2
BreakCount: 2
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: RADEON 9700 PRO
HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6378
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2
I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
Regards,
The real world -
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
Problem with the hierarchial fields in a Purchase order xml report
Hi,
I am having a problem with the hierarchy problem. We are populating attribute 15 of a PO header. some times it can be null. FYI, we are using 11.5.10 instance where oracle supports direct PO template rather than having a rdf file.
And now in the xml report, if attribute15 of po header is not null then it is fine.
But if attribute15 is null, then the template is picking from the next available attribute15 that is from the po lines. As the line level group of "LINES" is between the "PO_DATA" (header group), hence the template is checking for next available attribute15.
Can any one please suggest how to design the template where we can make the template to check only for that tag at the header level group rather than the line level group tag?
Thank You in advance.
Regards,
Srinivas.Hi
Incase you want to transfer attachements from SRM to R/3, then you try implementing the BADI in SRM side. The BADI which will help in this case is
<b>BBP_CREATE_PO_BACK</b> BADI.
<b>Please read the standard SAP documentation of this BADI using SE18 Transaction, before making any code changes.</b>
<u>Few Important SAP OSS notes to refer in this case -></u>
Note 989184 - Transferred shopping cart with internal attachments
Note 550071 - FAQ: EBP - Shopping Cart
Note 916347 - Transfer shopping cart with internal attachments
Note 1001130 - FAQ - Attachment questions (Buyside)
<u>Few useful links -></u>
<b>http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
Re: Attachments to backend
Re: Document Attachments in Shopping Cart
Re: Attachment in SRM
Re: SRM Documents and Attachments
Re: Limit in Attachments of an item in Shopping Cart
Re: return delivery text from material document is not passed to SUS
</b>
Do let me know, incase you face any problems.
Regards
- Atul -
Problem with the AF of my new 18-135mm EFS IS STM lens
Hello,
The lens came with the EOS Rebel T5i bundle.
The auto focus is working incorrectly, focusing closer than the detected area. This is happening when I use the viewfinder. When a picture is taken using the “direct view” (LCD display) it focus correctly.
I didn’t use the camera a lot since I bought it, now looking the first pictures I see that this problem is happening since I bought it.
I changed the zoom lens with another Canon camera and then my new Rebel T5i works fine and the same problem happens with the other camera, therefore I’m sure that the problem is in the lens and not in the camera body.
The out of focus is more noticeable when I'm taking pictures in 18mm position to an object farther than 2 meters but it is happening in any zoom position. It is clear when I compare the same picture taken with the viewfinder with one taken with the LCD Display.
I updated the body firmware and the problem continues.
Is it possible to update the lens firmaware? I couldn’t find them in the canon webpage.
I will go into an important trip next week, therefore I will not have time to send the camera to repair.
Any idea?
Thanks!You may want to rent a lens for your trip and get this lens to service.
You'll want to be sure it really is a problem with the lens (it sounds like it is from your description). Test the lens against a "flat" target (such as a wall). You can hang something on the wall with high-contrast (newspaper works great) and put the camera on a tripod. The idea is that (a) the camera is definitely not moving, (b) the focus target is definitely not moving, and (c) the target is flat and there are no distracting objects in the field of view so it's not possible for the focus system to decide to lock focus on anything OTHER than your intended target.
Next... deliberately turn the focus ring to put the camera out of focus (so that the camera HAS to move the focus). This is mildly tricky with an STM lens since there's no mechanical link from the focus ring to the lens -- it's electronic. The lens only accepts focus input when focus is active (e.g. half-press the shutter button, etc. to wake it up.) I run focus all the way in and test several times, then run focus all the way out and test several times (that way it has to move focus in both directions.)
If the lens is consistently focusing closer, then it will need service.
Tim Campbell
5D II, 5D III, 60Da -
I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine -
How to solve a serious problem with the Battary of my T500 laptop ?
Hi Forum,
My personal laptop is Lenovo THINKPAD T500 2055, and its main specifications are as follows:
- 39T6651 SBB 9 CELL LI-ION BATTERY
- Intel Core 2 Duo processor T9400 (2.53GHz 1066MHz 6MBL2)
- 8 GB DDR3 SDRAM Memory Module 4 GB (2 x 4 GB) 1066MHz DDR31066/PC38500 DDR3 SDRAM SoDIMM Kingston.
- 2 GB Intel Turbo Memory hard drive cache.
- ATI Mobility Radeon 3650 with 256MB.
- 160 GB Hard Disk Drive, 7200rpm.
- Windows 7 Ultimate with the latest Service Pack (x64).
My problem precisely and concisely is the Battary. I have been using my laptop with the same battary since 01.01.2009 (Almost 3.5 Years), and the battary has been working quite OK.
Most of the time my laptop is plugged in and working with the electricity. However, A very few times I used the laptop while it is running on battery, Nevertheless, I have the habit to empty the batter once in a while i.e. Every 3 weeks, I unplug the charger and keep using the laptop till I see the warning orange sign (5%), then, I plug it in again.
Thankfully, I never had any problems with the battary nor the laptop, and when I charge the laptop usually it shows full sign (100%).
Three days ago, All of a sudden my laptop starts flashing the orange battary sign constantly while charge indicates 100%. When I try running on the battery by unplugging the AC adapter, the laptop loses power immediately and shuts down right away.
What do you think should I do? Could you please provide me any useful tips to resolve this problem?
I would greatly and sincerely appreciate all your inputs !
Thanks for your consideration of my request, and I very much look forward to hearing from you at your earliest convenience !
Solved!
Go to Solution.In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine -
When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.
Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions?
Maybe you are looking for
-
CL_GUI_ALV_TREE Event CHECKBOX_CHANGE
Dear Experts, i use a tree control using class cl_gui_alv_tree. All fields of my fieldcatalog are specified as fieldcat-checkbox = 'X' and fieldcat-edit = 'X'. i have a global class zcl...... where i implemeted a method as event_handler for class cl_
-
Limit shopping carts in extended classic scenario
How can we implement limit shopping carts in extended classic scenario. Has anyone done it? Thanks in advance
-
I subscripted for a single app Photoshop
I followed all the instruction but the only thing that i downloaded is a trial version and it is counting down . I contacted tecnical support and the guy reinstalled everything new and it is still the same every time i open Photoshop i get a pop-up
-
ORACLE RESOURCE MANAGER - POOR RESULTS
Hi all. Created a smple test case - basically consumed FULL server CPU with queiing by generic user. Then came in with a user who has 40% allocaiton at P1. here are the basic results NO LOAD (server idle) => 7 secs 100% LOAD (user in TOP CPU group ->
-
Hi, Any one can tell me what is check table and value table?.can any one explain me in simple words.