Problems with the imadmin purge user command

I am using iMS 5.2 hot fix 1.05, iDA1.2sp1 and iDS 5.1
When I try to use the imadmin purge user command I get the following errors:
[email protected]: purging user
[email protected]: purge user failed
Failed connection refused.
If I don't use the -g 0 option then it reports success, but the user account is still in LDAP...
I found a reference to the imadmin user purge command not working when you have iDA 1.2patch1 and iMS 5.1 patch 1 unless you make a change to your resource.properties file but i have tried the file both way and I get the same error with the purge user command.
I can use the imadmin delete user or imadmin modify user without any problem. I am just having trouble with the imadmin purge user command.
Any ideas?

This problem is documented in bug id 4671472. I have attempted the recommeded fix, but the problem persists. If anyone else has been having a similar problem and has any solution let me know. Thanks.
Peter

Similar Messages

I can't safe reboot if I choose my user account, no problem with the rest or user's accounts

Hi to all,
Since I've installed ML and also after 10.8.1 upgrade, my account is behaving very strangely.
It does seem to work, but every time I restart in my account, it takes ages and starts up app I've already closed (as if it was frozen when restarted), I get Toast 10, Disk Utility, App Store, Safari, Mail and Photoshop. Slowly, very slowly, in this order. I had improved, as I had some reboots with the Mountain Lion installer asking to instal Mac OS X!
Oddly enought, that first times Finder didn't show when I pressed Cmd-Tab for changing applications, it would show only if I clicked on the Desktop.
I did a clean install of ML and imported from Time Machine. I also did a "upgrade install", that is, over what I had (already ML).
I can't restart or close down unless I do it on the cold way, that is, pressing the power butto, as I can get no shutdown dialog, and if I choose from the Apple Menu, no matter what I choose, nothing seems to happen. Same when I choose "About this Mac", nothing happens, I have to manually open System Profiler.
But, in contrast, I can open from the Apple Menu App Store with no problems, for example.
Now I reboot and shutdown my Mac thanks to the Terminal!
Another "minor" inconvenient is that my Mail Rules weren't imported, and I don't know how to pass them to the new Mail, so all my Mail lies there in the "Inbox" unclassificated
If I go to a different user, then everything works apparently. So it must be something I have added, but it can be something installed many System versions before, so I have no idea on how to track it down, although I've deleted many old applications and preferences, including some problematic Fonts, Perian, etc.
I tried safe boot, but when I enter in my user, screen turns light gray and it doesn't start anything, so I have to force a cold shutdown again with the power button and restart again.
Safe boot with a different account has no problem again.
Sorry for the looong explanation, but, although I can work in my user, I'm worried as my work slows down a lot.
Thanks in advance to any help you can give me!

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Problems with the administration of users in BI 11G

HELLO EXPERTS
The problem presented is as follows, I am managing my BI users from weblogic, I have created groups and application roles, users, and roles were assigned roles and groups were assigned the income groups in each of the dash board that I have, but to create a new user and assign roles for which you have permission to pass I have to wait some time for the changes to take effect, I wonder if there is any more efficient way to manage users in the tool or else I'm doing wrong.
thank you very much

HELLO EXPERTS
The problem presented is as follows, I am managing my BI users from weblogic, I have created groups and application roles, users, and roles were assigned roles and groups were assigned the income groups in each of the dash board that I have, but to create a new user and assign roles for which you have permission to pass I have to wait some time for the changes to take effect, I wonder if there is any more efficient way to manage users in the tool or else I'm doing wrong.
thank you very much

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Error message in time machine: "There was a problem with the user name or the password of the network

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

Problems with the vba command sendkeys in Access 2013.

Hi, I have problems with the vba command sendkeys in Access 2013.
I use a text field (no control) in a form. By means of the VBA command SendKeys "+ {DELETE}", 1 I get the text in memory from the text field, then place (paste) the text in a Word document. The command line sendkeys
is followed by moving the focus to a particular control. In Access 2003, which went smoothly. Now the sendkeys command is executed only in Access 2013 in the control that then receives focus. If the procedure ends with the sendkeys command then it works well.
The procedure with the sendkeys command is activated by a button on a form.
Who can help me?
private user

Hi H.Plmp,
Based on the description, you want to call the sendkeys from a button.
>> use a text field (no control) in a form. By means of the VBA command SendKeys "+ {DELETE}", 1 I get the text in memory from the text field<<
What did you mean that you no control? And how did you get the text in memory from the text field? Also I am not able to understand the exact reason that the command doesn't works in Access 2013.
And based on the test, sendkeys "+ {Delete}" works well for me when I set a focus for the textbox control. Here is th test code:
Me.Controls("txtField1").SetFocus
SendKeys "+ {DELETE}", 1
If I misunderstood, please feel free to let me know.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Charm: BP problem with the user

Hi!
I have problem with the user for the usage of ChaRM.
When I try to set the the (urgent) correction in Development i get the following error.
There is no valid business partner assigned to your user.
Meanwhile the appropriate BP-entry for the user exists:
External BP number: <SID> <CLNT> <user name>
Identification number: <SID> <installation number> <user name>
Furthermore I have the following error, when I try to approve the change request:
Partner 141 (Change-Manager) is neither an employee nor an organizational unit
I would be great to get some help here.
Thank you
regards
Thom

Hi Thomm,
1. There is no valid business partner assigned to your user.
In BP under identification tab,
ID type idenification number
CRM001 <SID> <installation number><CLNT><username>
2.Partner 141 (Change-Manager) is neither an employee nor an organizational unit
Assign the BP role as "Employee" for Change Manager
regards
Naveen

Could not complete the ... command because of a problem with the filter module interface

I just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without wome idea as to what might cause these errors.
Any insight appreciated.
Stu

Not sure I know what you mean by "disabling the Nik filter folder".
I have the latest updates for the Nik filters and they are compatible with CS6.
Since yesterday I tried uninstalling the Nik filters, manually locating and removing every file related to Nik/Nik Software, redownloading the Nik installers, uninstalling/reinstalling Photoshop, and reinstalling the Nik filters. Same result.
I am pretty sure this is something on the Photoshop end, but am not sure what to do next. Maybe repeat the above and use the Creative Suite cleaner before reinstalling?
Stu

Are there any other left eye dominant (or left handed) iPhone users that experience problems with the touch screen keyboard selecting the letter next to the one you'd intended..?

Are there any other left eye dominant (or left handed) iPhone users that experience problems with the touch screen keyboard selecting the letter next to the one you'd intended..?

It's either hand right or left.
I have the same issue myself. Not sure if it's b/c my fingers are too big or if I'm really missed the letter on the keyboard.

Is someone with iMac 2010 users have problems with the monitor. I mean horizontal stripes and dark screen ?

Is someone with iMac 2010 users have problems with the monitor. I mean horizontal stripes and dark screen ?

Mine's a late '09, but there have been display issues with iMacs.
Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

Problem with the NodeManager in Weblogic 10.0 MP1

Hi,
I have a problem starting the Nodemanager successfully. I have currently installed BEA Weblogic 10.0 MP1. The admin server is getting started successfully. When, I start the Nodemanager with the command:
startnodemanager -machine <hostname>, it neither gives the success message nor the error message. It comes to a stand still. Please see the below text, which appears on the Command prompt, when I run the nodemanager command.
Machine PUNITP128166D.ad.infosys.com
Listen Address: PUNITP128166D.ad.infosys.com
Listen Port: 8097
PID for D:\Ariba9r1\shared/bin/startNodeManager.cmd: 5980
D:\Ariba9r1\BuyerDev9r1\Server\bin>
D:\Ariba9r1\BuyerDev9r1\Server>set CLASSPATH=D:\BEA10\wlserver_10.0\server\lib\A
ribaWebLogic81Patches.jar;.;D:\BEA10\jdk150_11\lib\tools.jar;D:\BEA10\wlserver_1
0.0\server\lib\weblogic_sp.jar;D:\BEA10\wlserver_10.0\server\lib\weblogic.jar;
D:\Ariba9r1\BuyerDev9r1\Server>chdir /d "D:\Ariba9r1\shared\nodemanager"
D:\Ariba9r1\shared\nodemanager>"D:\BEA10\jdk150_11\bin\java.exe" -client -Xms32m
-Xmx200m -XX:MaxPermSize=128m -XX:+UseSpinning -Xverify:none -classpath "D:\BE
A10\wlserver_10.0\server\lib\AribaWebLogic81Patches.jar;.;D:\BEA10\jdk150_11\lib
\tools.jar;D:\BEA10\wlserver_10.0\server\lib\weblogic_sp.jar;D:\BEA10\wlserver_1
0.0\server\lib\weblogic.jar;" -Dbea.home=D:\BEA10 -Djava.security.policy=D:\BEA1
0\wlserver_10.0\server\lib\weblogic.policy -DSavedLogsDirectory=D:\Ariba9r1\shar
ed\nodemanager\logs -DJavaHome=D:\BEA10\jdk150_11 -DTrustedHosts=D:\BEA10\wlserv
er_10.0\common\nodemanager\config\nodemanager.hosts -DListenAddress=PUNITP128166
D.ad.infosys.com -DListenPort=8097 -DReverseDnsEnabled=true -DLogToStderr=true -
DLogFile=D:\Ariba9r1\shared\nodemanager\nodemanager.log -DNodeManagerHome=D:\Ari
ba9r1\shared\nodemanager weblogic.NodeManager
After this, when I check the nodemanager status in Console, then the status appears as REACHABLE. Assuming, this to be the successfully message, I try to start the managed servers associated with the Machine/Server. But, it fails and there appears a message on the console with the status as 'Force Shutting Down' for this server.
When I check the logs, there seems to be some problem with the Nulll exception. Please see the below logs as it appears, its only a part of the logs
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040306> <JMS service is active now.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <SAFService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226041> <BEA-281003> <SAF Service has been initialized.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <SAFService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226041> <BEA-281002> <SAF Service has been started.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226120> <BEA-101128> <Initializing HTTP services.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101135> <buyerserver1 is the default Web server.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101052> <[HttpServer (defaultWebserver) name: buyerserver1] Initialized>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101129> <Initializing the Web application container.>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226198> <BEA-180046> <INFO: Logging service enabled.>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC license service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Task Manager instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC security service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Transaction service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226229> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226229> <BEA-220027> <Web Service reliable agents are started on the server.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <JMX> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226604> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://PUNITP128166D.ad.infosys.com:8050/jndi/weblogic.management.mbeanservers.runtime .>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebLogicServer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226651> <BEA-000287> <Invoking startup class: ariba.j2ee.appserver.weblogic.Startup.startup(directory=D:\Ariba9r1\BuyerDev9r1\Server)>
####<Jun 28, 2010 4:20:27 PM IST> <Info> <WebLogicServer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722227229> <BEA-000288> <ariba.j2ee.appserver.weblogic.Startup reports: Changed directory to D:\Ariba9r1\BuyerDev9r1\Server>
####<Jun 28, 2010 4:20:27 PM IST> <Info> <Management> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722227244> <BEA-141187> <Java system properties are defined as follows:
ariba.server.home = D:\Ariba9r1\BuyerDev9r1\Server
awt.toolkit = sun.awt.windows.WToolkit
bea.home = D:\BEA10
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.headless = true
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBOracleJDBC.zip;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBDB2JDBC.zip;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBMssqlJDBC.zip;D:\BEA10\wlserver_10.0\server\lib\weblogic.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes;D:\Ariba9r1\BuyerDev9r1\Server\classes\AribaJ2EE.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions;D:\BEA10\wlserver_10.0\server\lib\wls-api.jar
java.class.version = 49.0
java.endorsed.dirs = D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed
java.ext.dirs = D:\BEA10\jdk150_11\jre\lib\ext
java.home = D:\BEA10\jdk150_11\jre
java.io.tmpdir = C:\DOCUME~1\suram_vishal\Local Settings\Temp\
java.library.path = D:\BEA10\jdk150_11\bin;.;C:\SYSROOT\system32;C:\SYSROOT;D:\BEA10\wlserver_10.0\server\bin;D:\BEA10\jdk150_11\bin;D:\BEA10\patch_wlw1001\profiles\default\native;D:\BEA10\patch_wls1001\profiles\default\native;D:\BEA10\wlserver_10.0\server\native\win\32;D:\BEA10\wlserver_10.0\server\bin;D:\BEA10\modules\org.apache.ant_1.6.5\bin;D:\BEA10\jdk150_11\jre\bin;D:\BEA10\jdk150_11\bin;D:\Ariba9r1\BuyerDev9r1\Server\bin;D:/Ariba9r1/BuyerDev9r1/Server/bin/Win32;D:/Ariba9r1/BuyerDev9r1/Server/bin;C:\SYSROOT\system32;C:\SYSROOT;C:\SYSROOT\System32\Wbem;C:\Program Files\Java\jre1.5.0_06;C:\Program Files\CA\SharedComponents\CAUpdate\;C:\Program Files\CA\SharedComponents\ThirdParty\;C:\Program Files\CA\SharedComponents\SubscriptionLicense\;C:\Program Files\CA\eTrustITM;C:\Program Files\CA\SharedComponents\ScanEngine;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\BEA10\wlserver_10.0\server\native\win\32\oci920_8;D:\Ariba9r1\BuyerDev9r1\Server;D:\Ariba9r1\BuyerDev9r1\Server\bin;D:\Ariba9r1\BuyerDev9r1\Server;D:\Ariba9r1\BuyerDev9r1\Server\lib\Win32;D:\Ariba9r1\BuyerDev9r1\Server\internal\lib\Win32
java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
java.protocol.handler.pkgs = weblogic.utils|weblogic.utils|weblogic.utils|weblogic.net
java.runtime.name = Java(TM) 2 Runtime Environment, Standard Edition
java.runtime.version = 1.5.0_11-b03
java.security.policy = D:\BEA10\wlserver_10.0\server\lib\weblogic.policy
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.5
java.vendor = Sun Microsystems Inc.
java.vendor.url = http://java.sun.com/
java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi
java.version = 1.5.0_11
java.vm.info = mixed mode
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 1.5.0_11-b03
javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
javax.xml.rpc.ServiceFactory = weblogic.webservice.core.rpc.ServiceFactoryImpl
javax.xml.soap.MessageFactory = weblogic.webservice.core.soap.MessageFactoryImpl
org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
org.xml.sax.driver = weblogic.apache.xerces.parsers.SAXParser
org.xml.sax.parser = weblogic.xml.jaxp.RegistryParser
os.arch = x86
os.name = Windows 2003
os.version = 5.2
path.separator = ;
sun.arch.data.model = 32
sun.boot.class.path = D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\serializer.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xalan.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xercesImpl.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xml-apis.jar;D:\BEA10\jdk150_11\jre\lib\rt.jar;D:\BEA10\jdk150_11\jre\lib\i18n.jar;D:\BEA10\jdk150_11\jre\lib\sunrsasign.jar;D:\BEA10\jdk150_11\jre\lib\jsse.jar;D:\BEA10\jdk150_11\jre\lib\jce.jar;D:\BEA10\jdk150_11\jre\lib\charsets.jar;D:\BEA10\jdk150_11\jre\classes
sun.boot.library.path = D:\BEA10\jdk150_11\jre\bin
sun.cpu.endian = little
sun.desktop = windows
sun.io.unicode.encoding = UnicodeLittle
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = Cp1252
sun.management.compiler = HotSpot Client Compiler
sun.os.patch.level = Service Pack 2
user.country = US
user.dir = D:\Ariba9r1\BuyerDev9r1\Server
user.home = C:\Documents and Settings\suram_vishal
user.language = en
user.name = suram_vishal
user.timezone = Asia/Calcutta
vde.home = D:\BEA10\user_projects\VanillaBuyer\servers\buyerserver1\data\ldap
weblogic.Name = buyerserver1
weblogic.ReverseDNSAllowed = false
weblogic.classloader.preprocessor = weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
weblogic.management.server = http://PUNITP128166D.ad.infosys.com:8099
weblogic.net.http.URLStreamHandlerFactory = ariba.util.net.URLStreamHandlerFactory
weblogic.nodemanager.ServiceEnabled = true
weblogic.security.SSL.ignoreHostnameVerification = true
weblogic.security.TrustKeyStore = DemoTrust
weblogic.system.BootIdentityFile = D:\BEA10\user_projects\VanillaBuyer\servers\buyerserver1\data\nodemanager\boot.properties
>
####<Jun 28, 2010 4:20:29 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <main> <<WLS Kernel>> <> <> <1277722229510> <BEA-000365> <Server state changed to STANDBY>
####<Jun 28, 2010 4:20:29 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <main> <<WLS Kernel>> <> <> <1277722229525> <BEA-000365> <Server state changed to STARTING>
####<Jun 28, 2010 4:20:29 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722229572> <BEA-149209> <Resuming.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230182> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_NEW to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149060> <Module Buyer of application Buyer successfully transitioned from STATE_NEW to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_PREPARED to STATE_ADMIN on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149060> <Module Buyer of application Buyer successfully transitioned from STATE_PREPARED to STATE_ADMIN on server buyerserver1.>
####<Jun 28, 2010 4:20:35 PM IST> <Warning> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722235212> <BEA-101162> <User defined listener ariba.server.ormsserver.ServletContextListener failed: java.lang.NullPointerException.
java.lang.NullPointerException
     at java.util.Hashtable.put(Hashtable.java:396)
     at ariba.j2ee.weblogic.Properties.initialize(Properties.java:53)
     at ariba.j2ee.core.J2EEServer.initialize(J2EEServer.java:77)
     at ariba.j2ee.core.AribaServletContextListener.contextInitialized(AribaServletContextListener.java:25)
     at ariba.server.ormsserver.ServletContextListener.contextInitialized(ServletContextListener.java:26)
     at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:458)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:168)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1744)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2909)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:973)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:361)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:182)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:359)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
>
####<Jun 28, 2010 4:20:35 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722235212> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_ADMIN to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:35 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
####<Jun 28, 2010 4:20:35 PM IST> <Alert> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
####<Jun 28, 2010 4:20:35 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Kindly help me in getting this resolved.
Thanks,
Vishal.

The error appears to come from the ariba code. I suggest asking them.
java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:396)
at ariba.j2ee.weblogic.Properties.initialize(Properties.java:53)

Problems with the function DBMS_XMLSCHEMA.copyEvolve

I´m having problems with the evolution of xml-schema.
First the function DBMS_XMLSCHEMA.copyEvolve works correctly, but since one week I get only errors. Strangely is the fact that I use the same files (xml-schema, xslt and xml instances) and the same SQL-Code. Even if I delete all tables, directories, ... with the drop instruction and create them again, I get only error messages. It is also strangely that the function DBMS_XMLSCHEMA.copyEvolve not works if the old and new xml-schema are identical and no XSLT-Stylesheet is handed over. Can by the function DBMS_XMLSCHEMA.copyEvolve something going wrong in the database ? Do I must recreate the database, and how can I do that by the XE? But that can not be a good solution.
Has anybody a idea what can I do?
Here is my error report:
Error starting at line 1 in command:
BEGIN
DBMS_XMLSCHEMA.copyEvolve(
schemaURLs => xdb$string_list_t('http://localhost:8080/internal/xmlschema/testschema.xsd'),
newSchemas => XMLSequenceType(XDBURIType('/public/testschema_evolution.xsd').getXML()),
transforms => XMLSequenceType(XDBURIType('/public/MapTotestschema_evolution.xslt').getXML()));
END;
Error report:
ORA-30944: Fehler beim Rollback für XML-Schema "http://localhost:8080/internal/xmlschema/testschema.xsd" Tabelle "MYUSER"."XMLSCHEMATABELLE" Spalte ""
ORA-02304: Ungültiges Objektidentifizierungsliteral
ORA-30942: Fehler bei XML Schema Evolution für Schema "http://localhost:8080/internal/xmlschema/testschema.xsd" Tabelle <n/a> Spalte ""
ORA-31088: Objekt "MYUSER"."BIN$QNQjNoYiRfC4KlQtnfUpMw==$0" hängt von Schema ab
ORA-06512: in "XDB.DBMS_XMLSCHEMA_INT", Zeile 113
ORA-06512: in "XDB.DBMS_XMLSCHEMA", Zeile 210
ORA-06512: in Zeile 2
Thanks David

Can you try doing the following before running copyEvolve
SQL> purge recyclebin
2 /
Recyclebin purged.
SQL> alter session set recyclebin = off
2 /
Session altered.
SQL>and see if it works as expected.

Problems with the installation of the Oracle 8i in Red Hat 6.1

It has some days I come trying to install the Oracle (Oracle 8i) in an operational system Linux Red Hat 6.1 and come finding problems, that did not obtain to determine correctly are of the Virtual Java Machine or in runIns.sh of the Oracle.
I go to give a detailed description of the error and mainly of runIns.sh for who it knows vocjs to help me in this arduous task that became the installation of oracle.
The installation of the Virtual Java Machine as well as the one of the Oracle followed the procedures told in the Leiame.Oracle being carried through with the user root.
All the installation process is being carried through with an user of the called system oracle8i pertaining to the primary group oinstall and the suplemental group dba.
When I enter with the following string of command I receive the error below:
$ ./runInstaller
Initializing Java Virtual Machine from /usr/local/jre/bin/jre. Please
wait...
Error in CreateOUIProcess(): -1
: invalid address
The archive runInstall.sh before I discovered this group if found in the following way.
/usr/local/jre/bin/jre -ss4m -oss4m -ms32m -mx64mb -Doracle.installer.nlsEnabled=TRUE -Doracle.installer.startup_location=. -Doracle.installer.library_loc=../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/bin/linux -cp ../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/InstImages.jar:../../stage/Components/oracle/swd/.oui/1.6.0.7.0/1/DataFiles/Expanded/lib/xmlparser.jar:./ru nimage/lib/OraInstaller.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/ewt.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/li b/help.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/InstHelp.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/oracleice. jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/OraInstaller.jar:/tmp/orainstall: -nojit oracle.sysman.oii.oiic.OiicInstaller -scratchPath /tmp/orainstall -sourceLoc "../../stage/products.jar" -sourceType network $1 $2 $3
Soon after with a message placed here I moved for the following format, that is with which remains now.
/usr/local/jre/bin/jre -ss4m -oss4m -ms32m -mx100mb -Doracle.installer.nlsEnabled=TRUE -Doracle.installer.startup_location=. -Doracle.installer.library_loc=../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/bin/linux -cp ../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/InstImages.jar:../../stage/Components/oracle/swd/.oui/1.6.0.7.0/1/DataFiles/Expanded/lib/xmlparser.jar:./ru nimage/lib/OraInstaller.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/ewt.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/li b/help.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/InstHelp.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/oracleice. jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/OraInstaller.jar:/tmp/orainstall: -nojit oracle.sysman.oii.oiic.OiicInstaller -scratchPath /tmp/orainstall -sourceLoc "../../stage/products.jar" -sourceType network $1 $2 $3
They forgive for the exaggerated size of the question, but already I placed this question in other groups of discugco as well as for the Oracle bed and I did not get reply.
I anticipate Gratefulness.
Sebastico Carlos Santos
Universidade Federal de Uberlbndia
Uberlbndia, Minas Gerais, Brasil

I had this problem the best thing to do is make sure you have the Blackdown.org JDK116_v5 for Linux installed. Then:
JAVA_HOME=/somedirectory/jdk116_v5
export JAVA_HOME
This fixed the problem for me and I was able to run runIns.sh.

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the driver?

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the upgrade which is affecting the transfer? Is there a way of resolving this?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Problem with the cache hit ratio

Hello,
I ma having a problem with the cache hit ratio I am geting. I am sure, 100% sure, that something has got to be wrong with the cache hit ratio I am fetching!
1) I will post the code that I am using to retrieve the cache hit ratio. I've seen about a thousand different equations, all equivalent in the end.
In oracle cache hit ratio seems to be:
cache hits / cache lookups,
where cache hits <=> logica IO - physical reads
cache lookups <=> logical IO
Now some people use the session logical Reads stat, from teh view v$sysstat; others use db block gets + db consistent gets; whatever. At the end of the day its all the same, and this is what i Use:
SELECT (P1.value + P2.value - P3.value) AS CACHE_HITS, (P1.value + P2.value) AS CACHE_LOOKUPS, P4.value AS MAX_BUFFS_SIZEB
FROM v$sysstat P1, v$sysstat P2, v$sysstat P3, V$PARAMETER P4
WHERE
P1.name = 'db block gets' AND
P2.name = 'consistent gets' AND
P3.name = 'physical reads' AND
P4.name = 'sga_max_size'
2) The problem:
The cache hit ratio I am retrieving cannot be correct. In this case i was benchamarking a HUGELY inneficient query, consisting of the Union of 5 Projections over the same source table, and Oracle is configured with a relatively small SGA of 300 MB. They query plan is awful, the database will read the source database table 5 times.
And I can see in the physical data statistics of the source tablespace, that total Bytes read is aproximatly 5 times the size of the text file that I used to bulk load data into the databse.
Some of the relevant stats, wait events:
db file scattered read     1129,93 seconds
Elapsed time: 1311,9 seconds
CPU time: 179,84
SGA max Size: 314572800 Bytes
And total bytes read: 77771964416 B (aproximatly 72 Gga bytes)
the source txt loaded to the database was aprox 16 G
Number of reads was like 4.5 times the source datafile.
I would say this, given the difference between CPU time and Elapsed Time, it is clear that the query spent almost all of its time doin DB file scattered reads. How is it possible that i get the following cache hit ratio:
Cache hit Ratio: 0,92
Cache hits: 109680186
Cache lookups: 119173819
I mean only 8% of that Logical I/O corresponded to physical I/O? It is just not possible.
3) Procedure of taking stats:
Now to retrieve these stats I snapshot the system 2 times. One before the query, one after the query.
But: this is not done in a single session. In total 3 sessions are created. One session two retrieve the stats before the query, one session to run the query, a last session to snapshot after the query.
Could the problem, assuming there is one, be related to this:
"The V$SESSTAT view contains statistics on a per-session basis and is only valid for the session currently connected. When a session disconnects all statistics for the session are updated in V$SYSSTAT. The values for the statistics are cleared until the next session uses them."
What does this paragraph mean. Does it mean that the v$sysstat only shows you the stats of the last session that closed? Or does it mean thtat v$sysstat is increamented with the statistics of each v$sessionstat once a session terminates? If so, then my procedure for gathering those stats should be correct.
Can anyone help me sort out the origin of such a high cache hit ratio, with so much I/O being done?

sono99 wrote:
Hi,s
first of, let me start by saying that there were many things in your post that you mentioned that I could no understand. 1. Because i am not an Oracle Expert, i use whatever RDBMS whenever i need to. 2. Because another problem has come up and, right now, i cannot inform myself to be able to comprehend it all.Well, could it be that you need to understand the database you are working on in order to comprehend it? That is why we strongly advise you to read the concepts manual first, you need to understand the architecture that Oracle uses, as well as the basic concepts of how oracle does locking and maintains read consistency. It does these different than other database engines, and some things become nonsense if looked at from the viewpoint of a single user.
>
quote:
It would be useful to see the execution plan jhust in case you have simplified the problem so much that a critical detail is missing.
First, the query code:
2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:>SQL> CREATE TABLE FAVFRIEND
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 2 NOLOGGING TABLESPACE TARGET
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 3 AS
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 4 SELECT ID as USRID, FAVF1 as FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 5 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 6 SELECT ID as USRID, FAVF2 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 7 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 8 SELECT ID as USRID, FAVF3 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 9 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 10 SELECT ID as USRID, FAVF4 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 11 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 12 SELECT ID as USRID, FAVF5 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 13 ;
Now, Althought it is clear from the query that the statement is executed with the NOLOGGiNG, i have disabled the logging entirely for the tablespace.There are certain rules about nologging that may not be obvious. Again, this derives from the basic Oracle architecture, and if you use the wrong definitions of things like logging, you will be led down the primrose path to confusion.
>
Futhermore, yes, the RDBMS is a test RDBMS... I have droped the database a few times... And I am constantly deleting an re-inserting data into the source database table named PROFILE.>
I also make sure do check all the datafile statistics, and for this query the amount of RedoLog, Undo "Log", Templife used is negligible, practically zero.Create table is DDL, which has implied commits before and afterwards. There is a lot going on, some of it dependent on the volume of data returned. The Oracle database writer writes things out when it feels like it, there are situations where it might just leave it in memory for a while. With nologging, Oracle may not care that you can't perform recovery if it is interrupted. So you might want to look into statspack or EM to tell you what is going on, the datafile statistics may not be all that informative for this case.
>
Most of the I/O is reading, a few of the I/O is writing.
My idea is not to optimize this query, it is to understand how it performs. Well, have you read the Concepts manual?
I have other implementations to test, namely I having trouble with one of them.
Furthermore, I doubt the query Plan Oracle is using actually involves tablescans (as I I'd like it to do); because in the Wait Events, most of the wait time for this query is spent doing "db file scattered read". And I think this is different from a tablescan.Please look up the definition of [db file scattered read|http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/instance_tune.htm#sthref703].
>
Do you really have to use sessions external to the query session ? Can you query v$mystat joined to v$statname from the session itself.
No, I don't want to that!
I avoid as much as possible having the code I execute being implemented in java. Why do you think java has anything to do with this? In your session, desc v$mystat and v$statname, these are views you can look at.
When i can avoid it I don't query the database directly through JDBC, i use the RDBMS command line client, which is supposed to be very robust. Er, is that sqlplus?
So yes, I only connect to the database with JDBC... in very last session.
Of course, I Could Have put both the gather stats before query and gathers stats after query a single script: the script that would be also runing the query.
But that would cause me a number of problems, namely some of the SQL i build has to be implemented dynamically. And I don't want to be replicating the snapshoting code into every query script I make. This way I have one sql with the snapshoting scripts; and multiple scripts for running each query. I avoid code replication in this manner.Instrumentation is a large subject; dynamic sql generation is something to be avoided if possible. Remember, Oracle is written with the idea that many people are going to be sharing code and the database, so it is optimized in that way. For SQL parsing in particular, if every SQL is different, you get a performance problem called "hard parsing." You can (and generally should, and sometimes can't avoid) use bind variables so that Oracle doesn't need to hard parse every SQL. In fact, this is one of those things that applies to other engines besides Oracle. I would recommend you read Tom Kyte's books, he explains what is going on in detail, including in some places the non-Oracle viewpoint.
>
Furthermore, Since the database is not a production database, it is there so I can do my tests. I don't have to be concerned with what other sessions may be doing to my system. There are only the sessions I control.No, there are sessions Oracle controls. If you are on unix, you can easily see this, but there are ways to see it on Windows, too. In some cases, your own sessions can affect themselves.
>
then what it the array fetch size ? If the array fetch size is large enough the number of block visits would be similar to the number of physical block reads.
I don't know what the arraysize you mention is. i have not touched that parameter. So whatever it is, it's the default.You should find out! You can go to http://tahiti.oracle.com and type array fetch size into the search box. You can also go to http://asktom.oracle.com and do the same thing, with some more interesting detail.
>
By the way, I don't get the query results into my client, the query results are dumped into a target output table.
So, if the arraysize has something to do with the number of rows that Oracle is returning the client in each step... I think it doesn't matter.You may hear this phrase a lot:
"It depends."
>
As for the query plan, If i am not mistaken you can't get get query plans for queries that are: create table as select.What?
JG@TTST> explain plan for create table jjj as select * from product_master;
Explained.
JG@TTST> select count(*) from plan_table;
COUNT(*)
         3
I can however commit the create table part and just call for the evalution of the Select part of the query; i believe it should be same.
"Optimizer"     "Cost"     "Cardinality"     "Bytes"     "Partition Start"     "Partition Stop"     "Partition Id"     "ACCESS PREDICATES"     "FILTER PREDICATES"
"SELECT STATEMENT"     "ALL_ROWS"     "2563"     "586110"     "15238860"     ""     ""     ""     ""     ""
"UNION-ALL"     ""     ""     ""     ""     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "512"     "117222"     "3047772"     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "513"     "117222"     "3047772"     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "513"     "117222"     "3047772"     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "513"     "117222"     "3047772"     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "513"     "117222"     "3047772"     ""     ""     ""     ""     ""
This query plan was taken from sql developer, exported to txt, and the PROFILE table here has only 100k tuples.
Right now I am more concerned with testing the MODEL query. Which Oracle doesn't seem to be able any more... but that is a matter for another thread.
Regarding this plan. The Union ALL seems to be more than just a binary Operator... IT seems to be Neray.
The union all on that execution plan seems to be taking as leaf tables 5 99sono.Profile tables, and be making a table scan to them all. So I'd say that the RDBMS should only scan each database block once and not 5 times.
But: It doesn't seem to be so. IT seems like what oracle is doing is scanning completly each the table, and then moving on to next select statement in the UNION ALL. Because given the amount of source table that was read, 5 times greater than the size of the source table. Oracle didn't reuse read blocks.
But this is just my feeling.Your feeling is uninteresting. Telling us what you really hope to accomplish might be more interesting.
Anyway, in terms of consistent gets, how many consistent gets should the RDBMS be doing? 5
One for each table block?It depends.
>
My best regards,
Nuno (99sono xp).

Problems with the imadmin purge user command

Similar Messages

Maybe you are looking for