Problems with the Interface

 Hi,have somebody the same Problem with the Login interface before, that I can't type my Username and code, however I click in those typing-blocks it won't allow me to type in... Thanks

What version of Windows are you on (XP, Vista, Windows 7, Windows 8 )? Is it 32-bit or 64-bit? http://support.microsoft.com/kb/827218 What is the version of Internet Explorer installed on your computer? In Internet Explorer go to Help -> About Internet Explorer. P.S. Please, don’t say that you are not using Internet Explorer. This is irrelevant. Skype depends on Internet Explorer.

Similar Messages

  • Problem with mac interface

    Hi !
    I just installed Dreamweaver CS4 on my new Macbook Pro. I used to use Dreamweaver CS4 on Windows. But, I have a problem with the interface on my macbook : when dreamweaver is running, I can see my desktop : there is no background like in a MDI application (on windows). To illustrate my problem, I took two screenshots :
    on mac :
    and on windows :
    So, I would like to know how to have the same interface with Mac OS X than with Windows.
    Thanx for your help and sorry for my english but i'm french.

    Click the green zoom (+) button in the top-left corner of the window to switch between a larger and smaller window size.
    Depending on the active application it either fills the entire screen or zooms to the size of the last largest size of the window that you set yourself by dragging bottom righthand corner to desired size.
    Photoshop has various ways to hide the Desktop. Either by using the Application frame (which doesn't neccessarily hide the entire Desktop) or by pressing the key F. Wanted by PC users but usually not by Mac users. (I would personaly never use it as it obscures the Desktop so you cannot easily reach other applications and documents by just clicking them to call them into the front and get active).
    DW doesn't have an application frame but it is easy enough to fill the entire screen with the active window, particularly if you open up a few panels and dock them to each other and use Split screen view with code on one size and design on the other, then place various bars at top and bottom. When you have organized it to your liking, save it as a Workspace (Window/Workspace Layout/New Workspace) and you have it handy for future use.
    Learn how to use the windows and workspaces in an efficient way and one of these days you might get used to it...

  • Could not complete the ... command because of a problem with the filter module interface

    I just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
    I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
    The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without wome idea as to what might cause these errors.
    Any insight appreciated.
    Stu

    Not sure I know what you mean by "disabling the Nik filter folder".
    I have the latest updates for the Nik filters and they are compatible with CS6.
    Since yesterday I tried uninstalling the Nik filters, manually locating and removing every file related to Nik/Nik Software, redownloading the Nik installers, uninstalling/reinstalling Photoshop, and reinstalling the Nik filters. Same result.
    I am pretty sure this is something on the Photoshop end, but am not sure what to do next. Maybe repeat the above and use the Creative Suite cleaner before reinstalling?
    Stu

  • Can't use certain filters- "problem with the filter module interface"

    Hello,
    I frequently use the BPelt Flatten and Multifill plugins and they have always worked perfectly until today. Now I get the following error: "Could not complete the [Multifill/Flatten] command because of a problem with the filter module interface."
    I use Photoshop CS6 Extended with the Creative Cloud membership, and just recently updated to version 13.1.1 x64. I believe this may be related, as the plugins worked before the update and nothing else has changed.  Any recommendations on how to fix this? Is it possible to undo  the update?

    Usually this means a bug in the third party plugin that you are using.

  • Problem with local interface

    Hi all,
    I have a problem with the local interface,
    after I change the Home and Local interface I get a message when compiling saying that the bean has to implement the inherited abstract method javax.ejb.EJBLocalObject.isIdentical (EJBLOcalObject) and the mothd isPrimaryKey()...why is that, do I need to implement these methods?
    Thanks,
    A.

    solved, wrong code

  • Problems with the new NAT in ASA 5510 (8.4)

    Hi together,
    i have some problems with the NAT statements in ASA Version 8.4.
    What i want is to translate the internal address of a server to the external address with a NAT rule.
    The ASA has only one WAN connection (named outside)
    The internal server has the ip address 192.168.0.221 (as example) and i want to translate all incoming traffic on port 3389 to the Server (192.168.0.221).
    This is only for training, i dont want to forward a 3389 port into the BAD in a productive Network
    first i create the network object for the inside server (192.168.0.221)
    object network Network_Obj_RDP
    host 192.168.0.221
    After that i create the access rule for incoming traffic on outside interface:
    access-list outside_access_in extended permit ip any any log debugging
    Next i create a access rule for the inside-prod network to allow the traffic to the RDP Server:
    access-list inside-prod_access_in extended permit object RDP interface outside object Network_Obj_RDP
    Now i create the NAT rule in the network object (Network_Obj_RDP):  
    object network Network_Obj_RDP
    nat (inside-prod,outside) static interface service tcp 3389 3389
    But if i want to connect via 3389 on the outside interface i see in the syslog this entry:
    Built inbound TCP connection 23248 for outside:80.187.107.132/7445 (80.187.107.132/7445) to inside-prod:192.168.0.221/3389 (External IP/3389)
    After a while the connection will be teardown with this message:
    Teardown TCP connection 23289 for outside:80.187.107.132/2294 to inside-prod:192.168.0.221/3389 duration 0:00:30 bytes 0 SYN Timeout
    It looks like that the acl works fine, but the NAT translation are wrong...
    perhaps somebody has a idea to fix this
    Looking forward and hope for help...
    Many thanks
    Greetings

    Hi Jouni,
    this is the correct Packet Tracer output i think:
    packet-tracer input inside-prod tcp 192.168.0.220 3389 8.8.8.8 4567
    Phase: 1
    Type: ACCESS-LIST
    Subtype:
    Result: ALLOW
    Config:
    Implicit Rule
    Additional Information:
    MAC Access list
    Phase: 2
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   0.0.0.0         0.0.0.0         outside
    Phase: 3
    Type: ACCESS-LIST
    Subtype: log
    Result: ALLOW
    Config:
    access-group inside-prod_access_in in interface inside-prod
    access-list inside-prod_access_in extended permit ip object Network_Obj-Productiv any log debugging
    Additional Information:
    Phase: 4
    Type: IP-OPTIONS
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 5
    Type: NAT
    Subtype:
    Result: ALLOW
    Config:
    object network Network_Obj_RDP
    nat (inside-prod,outside) static interface service tcp 3389 3389
    Additional Information:
    Static translate 192.168.0.220/3389 to 80.146.252.162/3389
    Phase: 6
    Type: USER-STATISTICS
    Subtype: user-statistics
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 7
    Type: IP-OPTIONS
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 8
    Type: USER-STATISTICS
    Subtype: user-statistics
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 9
    Type: FLOW-CREATION
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    New flow created with id 825, packet dispatched to next module
    Result:      
    input-interface: inside-prod
    input-status: up
    input-line-status: up
    output-interface: outside
    output-status: up
    output-line-status: up
    Action: allow
    That looks preety fine, but the way back isn´t right:
    packet-tracer input outside tcp 8.8.8.8 4567 192.168.0.220 3389
    Phase: 1
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   192.168.0.0     255.255.255.0   inside-prod
    Phase: 2
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   0.0.0.0         0.0.0.0         outside
    Phase: 3
    Type: ACCESS-LIST
    Subtype: log
    Result: ALLOW
    Config:
    access-group outside-in in interface outside
    access-list outside-in extended permit tcp any object Network_Obj_RDP eq 3389 log debugging
    Additional Information:
    Phase: 4
    Type: IP-OPTIONS
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 5
    Type: VPN
    Subtype: ipsec-tunnel-flow
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 6
    Type: NAT
    Subtype: rpf-check
    Result: DROP
    Config:
    object network Network_Obj_RDP
    nat (inside-prod,outside) static interface service tcp 3389 3389
    Additional Information:
    Result:      
    input-interface: outside
    input-status: up
    input-line-status: up
    output-interface: inside-prod
    output-status: up
    output-line-status: up
    Action: drop
    Drop-reason: (acl-drop) Flow is denied by configured rule
    I have no idea...

  • Problems with the wifi

    Hi, I have some problems with the connection to the wifi. I use a USB wifi pen from Belkin that uses the zd1211-firmware. I don't remember now the model but I think it isn't important because my wlan0 interface is recognized perfectly, I installed properly the firmware (although I think that it was installed yet) and in fact, i can connect to internet manually.
    Always I'm connected to the same wifi connection then I don't need special configurations to laptops, but I want to use dhcp. Then, in /etc/rc.conf I added wlan0="dhcp", wlan_wlan0="wlan0 essid ... key s:..." and, of course, I added wlan0 to the list of interfaces.
    The problem is that when I start the computer the connection fails and to connect I must do manually the next:
    ifconfig wlan0 up
    iwconfig wlan0 essid.... (the same thing I put on /etc/rc.conf)
    dhcpcd wlan0
    On one hand, I would like that internet works automatically (provisionally I add the three lines to rc.local)
    On the other hand, I want that I can choice the internet connection graphically from the desktop environment (kde, in my case), since now it doesn't shows nothing about internet connection, it simply works because my trick on rc.local, and I can't choice another wifi connection if I would.
    Thank you for your help.

    Wireless is not meant to be configured in rc.conf (which is documented in rc.conf itself if you have kept it up to date).
    If you have just one network connection, install netcfg, it has plenty of sample configurations, among which one for WEP.

  • Function module based generic extractor - Problem with the selection

    Hi all
    The following is my code in the function module. I am able to get the entire data if i dont give any selections and the number of records is also correct. But when i select a MATNR value, it returns 0 records where as it needs to return 3 records. If i give selection based on bukrs, werks, lgort its working fine. But if i give selection based on MATNR, then it is not working.... I think there is a problem in the bold part of my code. If i debug, LS_MATNR is having the correct value which indicates that there is no problem with the value being passed to LS_MATNR from my selection screen of my datasource in RSA3. Even GT_WERKS is also having data. Please help.
    OPEN CURSOR WITH HOLD S_CURSOR FOR
    SELECT  MARA~MANDT
            MARA~MATNR
            MARC~WERKS
            MARD~LGORT
            MARA~MEINS
            MARD~LABST
            MARD~EINME
            MARD~SPEME
            MARD~RETME
            MARD~INSME
            MARD~UMLME
            MARD~VMLAB
            MARD~VMEIN
            MARD~VMSPE
            MARD~VMRET
            MARD~VMINS
            MARD~VMUML
            MARC~XCHPF
            MARD~KLABS
            MARD~KEINM
            MARD~KSPEM
            MARD~KINSM
    from MARA inner join MARC on
    MARAMANDT = MARCMANDT AND
    MARAMATNR = MARCMATNR
    inner join MARD on
    MARAMANDT = MARDMANDT AND
    MARAMATNR = MARDMATNR
    AND MARCWERKS = MARDWERKS
    for all entries in gt_werks
    where MARC~werks EQ gt_werks-werks
    AND MARA~MATNR in LS_MATNR.
        ENDIF.                             "First data package ?
    Fetch records into interface table.
      named E_T_'Name of extract structure'.
        FETCH NEXT CURSOR S_CURSOR
                   APPENDING CORRESPONDING FIELDS
                   OF TABLE E_T_DATA
                   PACKAGE SIZE S_S_IF-MAXSIZE.

    try this
    select marc~matnr MARC~WERKS into t_marc for all entries in gt_werks
    where werks EQ gt_werks-werks and lvorm = space.
    if t_marc is not initial.
    select MARD~LGORT MARD~WERKS MARA~MEINS MARD~LABST MARD~EINME
    MARD~SPEME MARD~RETME MARD~INSME MARD~UMLME
    MARD~VMLAB MARD~VMEIN MARD~VMSPE MARD~VMRET
    MARD~VMINS MARD~VMUML MARC~XCHPF MARD~KLABS
    MARD~KEINM MARD~KSPEM MARD~KINSM  MARA~MEINS  from
    mard inner join MARA on mard~matnr = mara~matnr
    for all entries in t_marc where  mard~matnr = t_marc-matnr and mard-werks = t_marc-matnr
    and mard~lvorm = space.

  • Problems with the ipod

    I have already researched this problem to the max, so any other suggestions are welcome, but I have already read all the discussions on it as well as the Apple Documentation. I am coming here on the off chance someone knows soemthing and so I can document for the benefit of other ipod users.
    I get "Disk cannot be read from or written to" when trying to synch ipod. The error message does vary a bit.
    I have seen other users referred to this artile.
    http://docs.info.apple.com/article.html?artnum=301267
    This documentation is pretty useless as it says that everything can be wrong.
    So far I have restored my ipod many times, formatted it for windows, checked it for errors in windows, updated my ipod software, updated itunes, tried various methods described all to no avail. It is not a problem with a specific file because I have tried transferring only 100 out of the 2500 files in my collection to no avail.
    I will try updating my ipod from a different computer with a different library of music later tonight. So far I have not had access to a computer with a firewire drive so that I can make sure it's not a problem with the USB cord or interface.
    Suggestions are welcome! If updating it with another comp does not work I guess I'll try to use the ipods warranty. If that doesn't work I'll try to replace the harddrive myself.

    I have already researched this problem to the max, so any other suggestions are welcome, but I have already read all the discussions on it as well as the Apple Documentation. I am coming here on the off chance someone knows soemthing and so I can document for the benefit of other ipod users.
    I get "Disk cannot be read from or written to" when trying to synch ipod. The error message does vary a bit.
    I have seen other users referred to this artile.
    http://docs.info.apple.com/article.html?artnum=301267
    This documentation is pretty useless as it says that everything can be wrong.
    So far I have restored my ipod many times, formatted it for windows, checked it for errors in windows, updated my ipod software, updated itunes, tried various methods described all to no avail. It is not a problem with a specific file because I have tried transferring only 100 out of the 2500 files in my collection to no avail.
    I will try updating my ipod from a different computer with a different library of music later tonight. So far I have not had access to a computer with a firewire drive so that I can make sure it's not a problem with the USB cord or interface.
    Suggestions are welcome! If updating it with another comp does not work I guess I'll try to use the ipods warranty. If that doesn't work I'll try to replace the harddrive myself.

  • Problem with an Interface....

    We have configured, and reconfigured and inteface on one of our Solaris 9, Netra 240 servers. We are having problems with bge0. It does not want to come to the state of RUNNING. ifconfig shows us:
    bge0: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 2
    We have done things like unplumb, plumb ifconfig down, up, etc....

    The manual page says:
    RUNNING: ... for some interfaces this flag shows that the link is up.
    So maybe it is a problem with the cable or the hub/switch you use.
    Martin

  • Secure printing problems with the dialog box

    Hi!
    Some one which has problem with the scure dialog box then using secure printing?
    then we print in Adobe acrobat reader X 10.0.1 the dialog box for entring your pin nummer appearing under acrobat, causeing the program to locking until you go to the dialog box and clicking on it and enter the pin. The problem is that adobe not showing the dialog box in front of the printing overall dialog.
    had nog problem with the old 9, it started then we uppgraded. Haw tride a nother driver but haw same issue. And all other programs works greate, word, notepat etc so it is just Adobe that has the problem.. ?
    /J

    Hi!
    Its´s XP sp3 and the printer is a network printer(Toshiba e-studio 4520c)  running a PCL6 driver.
    Screen capture is not so much to see i think, running Swedish interface to. The ordinary dialogbox för printing is the first thing thats pops up, and then adobe reader frezes because the secund box pops up under adobe, you can click on it in the "toolbar" to continue. One thing that is diffrent when you print in adobe is that you can se on the "toolbar" for the popup box for the pin/password box is a Adobe icon on it. It is not so in example when printing in word, ie8 etc.
    The problem is that many users dont see it and thinks the program has stopt working.
    Im now going to try the PS driver from toshibas homepage..
    thanks for help!

  • Problem with the config.xml

    Dear all,
    After doing a wscompile on the config.xml file (JWSDP1.6), I am able to generate the wsdl for the interface defined.
    But now the config.xml shows an error
    "Cannot find the declaration of element 'configuration' "
    for the attribute xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config"
    Any idea what is the problem as "http://java.sun.com/xml/ns/jax-rpc/ri/config" is no longer available on the sun site.
    Any alternate references to be made to this xml namespace declaration.
    Rgds,
    Seetesh

    My point above is that Project 2007 was extremely buggy and unless files are saved using Project 2007 SP3 first you are likely to experience problems with the files when opening in project 2010. Project 2007 to 2010 with no service packs is problematic.
    With SPs applied you should have far fewer problems.
    Doesn't look like a exe with SP2 is available yet so you need to add the service pack separately, probably in the updates folder.
    If all Project 2007 installs are already at SP3 then no need for this.
    Rod Gill
    Author of the one and only Project VBA Book
    www.project-systems.co.nz

  • Funny problem with the mapping

    Dear All,
    I am facing with a funny problem with the mapping.
    I am working on a scenario in which Invoice IDOC created in R/3 will be posted to XI and then in XI, mapping are done to create an XML file out of that IDOC.
    In the Idoc, there is a segment E1EDKA1 which is getting created multiple times for different partners alongwith their details. The fields in E1EDKA1 segment are: PARVW,PARTN LIFNR etc.
    In the output I just want LIFNR number where PARVW = RE or RS.
    I have done the required mapping and when I am testing the mapping its giving me the required results correctly but when I make this scenario live then in real-time, the output XML file has no value for LIFNR.
    Can anybody guide me out why is it happening tht during mapping testing its giving the correct result but at real time the mapping is returing no value.
    Warm Regards,
    N.Jain

    Hi Nishant,
    Are you sure the test data which you are using while testing the mapping in IR and the one which comes when you test real time is the same?
    The data which comes real time. Copy the source payload and then test in mapping. See if you get the right data which you expect. If you do then theres some problem.
    Now also go to the same message and in trace you can find out the GUID of the mapping program which is used.
    Go to RWB - Last button..not sure what the name is .. something similar to Cache.. Find your mapping program and see if the GUID Matches. If the GUID matches then it is okay.
    Also try to do the following..
    Reactive the MM/IM.
    Go to ID. Make some dummy change in Interface determination and then activate it.
    Check the cache notification to make sure if the cache is updated.
    If the above doesnt help you let us know.
    Regards,
    Sumit

  • Firewire problems with audio interface

    Hi, I have a problem with the firewire connection of my Power Mac G4: I have a Tascam FW-1884 audio interface and when I turn it on, the firewire led (that should be always turned on for the correct working of the machine) after a pair of seconds turns off and doesn't work at all..
    Here's what my system console says if helps..
    ===== Thu Jan 12 2006 ===== 09:44:12 Europe/Rome =====
    Jan 12 09:44:20 localhost kernel: TASCAM FW1884 Audio Device: init (1 of 1)
    Jan 12 09:44:20 localhost kernel: TASCAM FW1884 Audio Device: start 1.2.1 (instances 1)
    Jan 12 09:44:21 localhost kernel: TASCAM FW1884 Audio Device: message 0xE00087D2 for 0x12060000
    Jan 12 09:44:23 localhost kernel: TASCAM FW1884 Audio Device: HandleWatchdogTimer: prefs daemon relaunched
    Jan 12 09:44:24 localhost kernel: TASCAM FW1884 Audio Device: newUserClient
    Jan 12 09:44:24 localhost kernel: TASCAM User Client: start
    Jan 12 09:44:24 localhost kernel: TASCAM User Client: clientMemoryForType
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: High speed bus detected
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FinishStartup: FW884MacXDevice (216812)
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: Driver Register Version 0x00000014
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884REGISTERVERSION 0x00000014
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884FPGAVERSION 0x00010031
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884ARMVERSION 0x000100B7
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884HARDWAREVERSION 0x00030000
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884HARDWARESERIAL 0x00000000
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884GUIDMSB 0x00022EFF
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884GUIDLSB 0xFE800000
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mRegBaseAddress 0x00000000
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mNodeNum 0x00000000
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mGenerationNumber 0x0000000E
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mlocalNodeNum 0x00000001
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mMIDIReceiveHi 0x00000002
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mMIDIReceiveLo 0x00000000
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: initHardware
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: createAudioEngine
    Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: init (1)
    Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: start (3)
    Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: initHardware (3)
    Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: performFormatChange
    Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: performFormatChange
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOCHANNEL 0x00000001
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOSPEED 0x00000002
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: New PLAYBACK_ISOCHANNEL 0x00000002
    Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: DoStartAudioTransfers w/resync
    Jan 12 09:44:30 localhost kernel: TASCAM FW1884 Audio Device: Input stream stopped (B)
    Jan 12 09:44:30 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
    Jan 12 09:44:30 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000200
    Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: * Failed ReadRegisterLong 0xE00002D6
    Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000200
    Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOCHANNEL 0x00000000
    Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
    Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000204
    Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: * Failed ReadRegisterLong 0xE00002D6
    Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000204
    Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOSPEED 0x00000000
    Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
    Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000020C
    Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: * Failed ReadRegisterLong 0xE00002D6
    Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000020C
    Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: New PLAYBACK_ISOCHANNEL 0x00000000
    Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
    Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000022C
    Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
    Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000214
    Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
    Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000218
    Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
    Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000021C
    Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
    Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000228
    I've tried running the same interface on my i-book (with the same drivers installed on the powermac) and all was good..
    Anyone can help me?
    Thanks =)
    power mac G4 quicksilver 800Mhz   Mac OS X (10.3.9)   i-book G4 1,25Ghz
    power mac G4 quicksilver 800Mhz   Mac OS X (10.3.9)   i-book G4 1,25Ghz
    power mac G4 quicksilver 800Mhz   Mac OS X (10.3.9)   i-book G4 1,25Ghz
    power mac G4 quicksilver 800Mhz   Mac OS X (10.3.9)   i-book G4 1,25Ghz
    power mac G4 quicksilver 800Mhz   Mac OS X (10.3.9)   i-book G4 1,25Ghz

    On both computers I have only one account, the fw cable is always the same..
    I have purchased a new cable and I'm testing it..
    Another thing to say is that the fw port number 2 is generally working better than 1.. I mean, while port 1 never loads my tascam (the computer firewire connection is always loaded succesfully on both ports) port 2 sometimes works.. well this can't be called stability at all =)
    Sometimes reastarting computer, unplugging cables etc can help starting succesfully a new session.. I've already resetted PMU but no progress..
    All these things don't last longer than one session..

  • I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message  saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)"   more........ .

    Would someone be able to explain to me the following issue with Iphoto?
    I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
    "Unable to to assemble  calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
    How can  I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
    Thank you for your help.   

    Apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start
    with Option #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

Maybe you are looking for