Problems with the Internal Calls in SPA8000

Hi Community,
I'm integrating a SPA8000 with latest firmware 6.1.10(001) against UC560 with 8.1. The calls between the analog phones connected to SPA8000´s ports against the SPA502´s phones connected to UC560 are working fine. Also between the UC560´s extensions to SPA8000 ports.
The problem are in the internal calls in the SPA8000.
Any idea why the internal calls in SPA8000 are not working fine ???
I follow this manual that I attached
Thanks in advance.

The problem was in the UC560, where you have to allow the following connections:
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip

Similar Messages

  • Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

    HP Pavillion DV7 notebook PC
    Windows 7 64
    intel I5
    6 gig memory
    service pack 1
    I am trying to identify a problem with my HP Pavillion dv7 laptop
    Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
    I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
    I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
    any help would be great this PC has a lot of info on it and I dont think it is a lost cause
    thanks

    Hi duddy, sorry to hear that you are having issues with your computer over heating.  I have found a document that will assist you with Restoring the BIOS.  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
    I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue.    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
    If you are still having issues, please let me know and I will be happy to offer more assistance..
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Problem with the dbmcli-call in a cronjob

    I have a problem with a cronjob. When I started the script "recover_dbmcli.sh" with the user-id p01adm, the script running succesfully.
    But when i started the same script with the crontab, the script started;  but the dbmcli-command was not running
    The crontab was edited with the same user-id p01adm.
    simple example:
    p01adm: crontab -e
    30 13 * * * touch /tmp/recover_cron_ok ; cd /home/p01adm/ ; ./recover_dbmcli.sh ;
    Script recover_dbmcli.sh:
    #!/bin/bash
    dbmcli -U c -i /home/p01adm/restore2.txt
    exit 0
    restore2.txt:
    db_admin

    > I have a problem with a cronjob. When I started the script "recover_dbmcli.sh" with the user-id p01adm, the script running succesfully.
    > But when i started the same script with the crontab, the script started;  but the dbmcli-command was not running
    Did you explicitly source the environment? Cron does not do that automatically. So you'd have to start your script such as
    #!/bin/csh
    source $HOME/cshrc
    source $HOME/.dbenv_<hostname>.csh
    etc.
    Markus

  • Since updating the IOS to the latest version, and I'm having problems with the voice calls and the data connection

    I'm facing a problem receiving calls, and connecting to data since I updated the IOS to the latest version

    Hi there Abdallahbaba,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    -Griff W. 

  • Problem with the International characters u00E0, u00E8, u00EC, u00F2, u00F9

    Dear Experts,
    My requirement is to send data files from SAP to Hyperion(Data Warehouse Tool) via application server. Here few fields(can be material description/ Name/ Address) contain international characters like à, è, ì, ò, ù (this is an example). So I need to send their equivalent characters (i.e a, e, i , o, u) to Hyperion. that is when I create a file in application server characters a, e, i, o, u should
    contain in the file.
    I used  ENCODING NON-UNICODE, UTF-8, DEFAULT but no use.
    Pls assist me.
    Thanks,
    Dharmendra Gali

    If you just have the couple of characters mentioned, use Jürgen's suggestion. Otherwise I'd recommend usage of SAP function module SCP_REPLACE_STRANGE_CHARS, which is much more comprehensive. Note that depending on your invocation though you might get multiple characters for some, e.g. ä to ae. To some degree you can control this, see my comments in Re: Removing diacritical (special & accented) characters in SAP.
    Cheers, harald

  • Problems with the internal clock

    Hello,
    I need to read samples with approximately constante time difference.
    I found the example ContAcq-IntClk.c and changed it a little bit and it seems that it work.
    But when I use a DAQmx_Val_FiniteSamps with a given count of reads than the last two values will be read to the same time!
    DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
    DAQmxErrChk (DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0","",DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,NULL));
    DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"",1,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps ,4));
    DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent(taskHandle,DAQmx_Val_Acquired_Into_Buffer,1,0,EveryNCallback,NULL));
    DAQmxErrChk (DAQmxRegisterDoneEvent(taskHandle,0,DoneCallback,NULL));
    E.g. the third and fourth value are read to the same time when I print also the current time in the callback function.
    Is this a bug?
    Regards
    Pellaeon

    Sorry,
    here my results...
    Nikolai
    Attachments:
    Testpanel.jpg ‏49 KB
    NSamples.jpg ‏62 KB

  • My Satellite A100 does not support SDHC cards with the internal card reader

    Hi,
    My satelite A100 does not support my sandisk 4 GB SDHC card.
    "normal" SD cards are not a problem with the internal card reader, and there are no problems with the sandisk 4 GB SDHC card using a external card reader.
    is there a software solution?
    regrads,
    Itock

    I do not have time to read users manuals for your notebook model but all supported cards can be listed there. I suppose SDHC is not listed and not supported.
    I do not know what you mean with software solution but, as far as I know, update for multimedia card reader is not available.

  • I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch.

    I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch, it Should be having so much problems. Thanks for your help.
    iPad, iOS 7.0.4

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

    Hi There,
    Need your assistance on the issue that we are facing in prod environment.
    We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
    and able to view the reports in Favorite Reports folder. But when I click on run Report we  are getting the below error  "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
    In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
    Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
     Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
    Regards,
    Sanjeev Kumar

    Duplicate thread：
    http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I have called my bank and they told me there is no problem with the credit its the appstore that jammed my account so please if you can try and deduct from my account ill be very gratefull thank you iPad 2 Wi-Fi   3G, iOS 6.1.3 iPad 2 Wi-Fi   3G, iOS 6.1.

    I have called my bank and they told me there is no problem with the credit its the appstore that jammed my account so please if you can try and deduct from my account ill be very gratefull thank you
    iPad 2 Wi-Fi + 3G, iOS 6.1.3
    iPad 2 Wi-Fi + 3G, iOS 6.1.3
    <E-mail Edited by Host>
    iPad 2 Wi-Fi + 3G, iOS 6.1.3

    Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
    If you need to contact iTunes Support then you can do so via this link : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I have called my bank and they told me there is no problem with the credit its the appstore that jammed my account so please if you can try and deduct from my account ill be very gratefull thank you iPad 2 Wi-Fi   3G, iOS 6.1.3

    I have called my bank and they told me there is no problem with the credit its the appstore that jammed my account so please if you can try and deduct from my account ill be very gratefull thank you
    iPad 2 Wi-Fi + 3G, iOS 6.1.3

    Jonijo88 wrote:
    I,m sory but whin i go to supprt  thay opin this bage and no another way that is let me wrait here and this problem is not first time it is happen with me evry time so jast whin thy fixed this problem i will stope wraiting here
    For God's sakes, look harder...
    http://www.apple.com/support/itunes/contact/

  • I have called my bank and they told me there is no problem with the credit its the appstore that jammed my account so please if you can try and deduct from my account ill be very gratefull thank you

    I have called my bank and they told me there is no problem with the credit its the appstore that jammed my account so please if you can try and deduct from my account ill be very gratefull thank you

    You have to contact iTune Support
    http://www.apple.com/support/itunes/contact.html

  • After a successful home button repair, I've got a buzzing sound when I make or receive calls. No problem with the speaker as I can listen to online radio stations and my music.

    After a successful home button repair on my iPhone 4, I've got a buzzing sound when I make or receive calls. No problem with the speaker as I can listen to online radio stations and my music.

    I guess your definition of a "successful repair" is different from most people's.
    If you got it serviced by Apple, take it back to them.
    If you had it serviced by a 3rd party, Apple won't touch it. Take it back to whoeever fixed it for you.

  • There is a problem with the phone app. When I want to call somebody the phone screen come too late. This will cause a problem if I call the wrong number

    There is a problem with the phone app. When I want to call somebody the phone screen come too late. This will cause a problem if I call the wrong number.  Apple please please please fix it as soon as possible and also check why the phone is always restart. I prefer to let us use the iOS 7 until you finished from the IOS 8 because Ios 8 still under construction  there is a tones problems in the system.  And this Will cause undirect problem for the iPhone 6

    There is no apple here in this user to user technical forum.
    Do this Use iTunes to restore your iOS device to factory settings

  • HT4085 Can not print international shipping labels on eBay does anyone know why no problem with the us labels

    I recently purchased the new I pad and I can not print the international labels.I have no problem with the U.S. labels or my air printing.can anyone help me with this thank you in advance

    What make and model printer? How does printing the international labels fail?

Maybe you are looking for