Problems with the internal clock
Hello,
I need to read samples with approximately constante time difference.
I found the example ContAcq-IntClk.c and changed it a little bit and it seems that it work.
But when I use a DAQmx_Val_FiniteSamps with a given count of reads than the last two values will be read to the same time!
DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
DAQmxErrChk (DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0","",DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,NULL));
DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"",1,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps ,4));
DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent(taskHandle,DAQmx_Val_Acquired_Into_Buffer,1,0,EveryNCallback,NULL));
DAQmxErrChk (DAQmxRegisterDoneEvent(taskHandle,0,DoneCallback,NULL));
E.g. the third and fourth value are read to the same time when I print also the current time in the callback function.
Is this a bug?
Regards
Pellaeon
Sorry,
here my results...
Nikolai
Attachments:
Testpanel.jpg 49 KB
NSamples.jpg 62 KB
Similar Messages
-
HP Pavillion DV7 notebook PC
Windows 7 64
intel I5
6 gig memory
service pack 1
I am trying to identify a problem with my HP Pavillion dv7 laptop
Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
any help would be great this PC has a lot of info on it and I dont think it is a lost cause
thanksHi duddy, sorry to hear that you are having issues with your computer over heating. I have found a document that will assist you with Restoring the BIOS. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
If you are still having issues, please let me know and I will be happy to offer more assistance..
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Problems with the Internal Calls in SPA8000
Hi Community,
I'm integrating a SPA8000 with latest firmware 6.1.10(001) against UC560 with 8.1. The calls between the analog phones connected to SPA8000´s ports against the SPA502´s phones connected to UC560 are working fine. Also between the UC560´s extensions to SPA8000 ports.
The problem are in the internal calls in the SPA8000.
Any idea why the internal calls in SPA8000 are not working fine ???
I follow this manual that I attached
Thanks in advance.The problem was in the UC560, where you have to allow the following connections:
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip -
Hey,
I`ve just purchased the MSI 875P mainboard. The board is running smoothly with bios version 1.4, but there is this small and anoying problem; The bios clock will not work. I set the time and date in the bios and when I go back in five minutes later the time and date are exactly the same.
Anyone else have this problem and is there a sollution for this?
Dacourt
Raidmax case
P4 2,6HT 800 mhz fsb
MSI 875P Neo-FIS2R
Geil 512 DDR ram 400 mhz
Creative Riva TNT2 which will be replaced with the Sapphire Radeon 9700 on monday
Samsung syncmaster 172t LCDThanks for your quick response.
Quote
Originally posted by wonkanoby
is cmos jumper on keep and whats vbat showing in pc health
Should`nt the jumper be on keep by default?
vbat(is that the same as battery in the pc health menuP): 2.96
Dacourt -
Problem with the International characters u00E0, u00E8, u00EC, u00F2, u00F9
Dear Experts,
My requirement is to send data files from SAP to Hyperion(Data Warehouse Tool) via application server. Here few fields(can be material description/ Name/ Address) contain international characters like à, è, ì, ò, ù (this is an example). So I need to send their equivalent characters (i.e a, e, i , o, u) to Hyperion. that is when I create a file in application server characters a, e, i, o, u should
contain in the file.
I used ENCODING NON-UNICODE, UTF-8, DEFAULT but no use.
Pls assist me.
Thanks,
Dharmendra GaliIf you just have the couple of characters mentioned, use Jürgen's suggestion. Otherwise I'd recommend usage of SAP function module SCP_REPLACE_STRANGE_CHARS, which is much more comprehensive. Note that depending on your invocation though you might get multiple characters for some, e.g. ä to ae. To some degree you can control this, see my comments in Re: Removing diacritical (special & accented) characters in SAP.
Cheers, harald -
MOVED: Diamond Plus - problems with the windows clock anyone?
This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=94558.0By default Windows will Sychronise the clock once e week.
Windows might think that you are in a different timezone.....
If it was CMOS related, the clock would be set back a few years after each time the power gets cut of. -
My Satellite A100 does not support SDHC cards with the internal card reader
Hi,
My satelite A100 does not support my sandisk 4 GB SDHC card.
"normal" SD cards are not a problem with the internal card reader, and there are no problems with the sandisk 4 GB SDHC card using a external card reader.
is there a software solution?
regrads,
ItockI do not have time to read users manuals for your notebook model but all supported cards can be listed there. I suppose SDHC is not listed and not supported.
I do not know what you mean with software solution but, as far as I know, update for multimedia card reader is not available. -
Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev KumarDuplicate thread:
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi,
I would like to know if someone have a problem with the clock widget after doing the update system to Mac OS X Mavericks (v.10.9), cause the appearance of my clock was like this (attached image). Pay attention for the position of hands of the clock (watch hands): Don't have something strange?
Anyone know how to fix this problem?
Thanks in advance.Hi, I have the same problem, I have done a fresh install of OS X and still did not fix the clock ... For when a new update?
Thanks -
I recently purchased the new I pad and I can not print the international labels.I have no problem with the U.S. labels or my air printing.can anyone help me with this thank you in advance
What make and model printer? How does printing the international labels fail?
-
The cursor on my iMac (Panther 10.3.9) freezes to where I cannot do anything unless I unplug the computer. It is NOT a problem with the mouse or the keyboard. How do I solve this problem?
ClassicII wrote:
Sorry to say but your imac g5 logic board has bad caps. This was a problem apple had and issued a out of warentee fix but that has now expired.
The cost to get this repaired is more than what you could find another used imac for.
I would suggest you get some details before you rush to make a diagnosis. You have absolutely no information to base this on. I see you're hitting up on numerous threads all over the place. Quality, meaning several good posts with reliable advice, is much more worthwhile than quantity. -
Problem with the volume keys on my keyboard.
Hey everybody,
I have a problem with the volume keys on my keyboard. This started a couple days ago and I can't seem to figure out how to fix it. When I press the volume up or down buttons, the graphic appears on the screen as it normally would, but has no effect on the volume of the sound coming out of my speakers. Therefore, the only way to change the volume of music or whatever I am listening to is to use the volume control within the program/website itself (itunes, youtube, etc.) Even changing the volume on the volume icon at the menu bar on top of the screen does nothing. If anyone has an idea of how to go about solving this issue, I would greatly appreciate it. Thanks!First look into the Preference > Sound > Outpur whether internal Speakers are choosen.
The only Preference to delete I can discover is com.apple.systempreferences.plist in your home Library folder. You can try to move it out to the desktop for example, not to loose all your settings. Restart and see whether the problem still persists. If you don't know how to do this here some Terminal (Applications > Utilities) commands. Enter them by copy and paste followed by <enter>
mv ~/Library/Preferences/com.apple.systempreferences.plist ~/Desktop/
restart
to get it back:
mv ~/Desktop/com.apple.systempreferences.plist ~/Library/Preferences/
confirm with "y" if you are asked to replace this file.
marek -
Problem with the MenuBar and how can i delete a own component out of the storage
Hello,
I opened this thread in the category "Flex Builder 2", but
under this category my questions fit better.
I have a problem with the MenuBar and a question to delete a
component out of storage.
1. We have implemented the MenuBar, which was filled
dynamically with XML data.
Sporadically it will appear following fault, if we "mousover"
the root layer.
RangeError: Error #2006: Der angegebene Index liegt
außerhalb des zulässigen Bereichs.
at flash.display::DisplayObjectContainer/addChildAt()
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
at mx.managers::SystemManager/addChild()
at mx.managers::PopUpManager$/addPopUp()
at mx.controls::Menu/show()
at mx.controls::MenuBar/::showMenu()
at mx.controls::MenuBar/::mouseOverHandler()
Here a abrid ged version of our XML to create the MenuBar:
<Menuebar>
<menu label="Artikel">
<menu label="Artikel anlegen" data="new_article" />
<menu label="Artikel bearbeiten" data="edit_article" />
<menu label="Verpackung">
<menu label="Verpackung anlegen" data="new_package" />
<menu label="Verpackung bearbeiten" data="edit_package"
/>
</menu>
<menu label="Materialgruppe">
<menu label="Materialgruppe anlegen"
data="new_materialgroup" />
<menu label="Materialgruppe bearbeiten"
data="edit_materialgroup" />
</menu>
</menu>
</Menuebar>
It is a well-formed XML.
2. Delete a component out of storage
We have some own components (basically forms), which will be
created and shown by an construct e.g.
var myComponent : T_Component = new T_Component ;
this.addChild(myComponent)
Some of our forms will be created in an popup. On every call
of the popup, we lost 5 mb or more, all childs on the windows will
be removed by formname.removeAllChild();
What cann we do, that the garbage collector will dispose this
objects.
Is there a way to show all objects with references (NOT
NULL)?
I have read in the Flex Help, that
this.removeChild(myComponent) not delete the form and/or object out
of the storage.
Rather the object must be destroyed.
It is sufficient to call delete(myComponent) about remove
this object out of the storage as the case may be that the
garbage-collector remove this object at any time?
Or how can I destroy a component correctly. What happens with
the widgets on this component e.g. input fields or datagrids?
Are they also being deleted?
Thanks for your help.
MatzeIf you mena the "photo Library" then you cannot delete it.
This is how iphone handles photos. There are not two copies. There a re simply two places from which to access the same photos. ALL photos synced to iphone can be accessed via Photo Library. Those same pics can be accessed via their individual folder. -
Problems with the Proxy Programme--Please help
Hi All,
I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
ProxyServer:::>posting request
ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
ProxyServer:::>postRequest
I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
ProxyServer:::>posted request successfully
ProxyServer:::>writing response
ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
ProxyServer:::>writeResponse exiting
ProxyServer:::>wrote response successfully
I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
package server.proxy;
//import all servlet related classes
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import server.resources.*;
//My Proxy server --->Currently it is very simplea and relies on
//other proxy servers of an already connected network.
public class ProxyServer extends HttpServlet
//stores the resource bundle
private ServerResBundle resBundle = null;
//checks for the mode of operation
private boolean proxySet = false;
private String proxy = null;
//storing the original System out/err etc
private PrintStream sysOutOrig = null;
private PrintStream sysErrOrig = null;
private InputStream sysInOrig = null;
//initialise certain features that are required later
public void init() throws ServletException
try
//initialise the resource bundle
this.initResBundle();
System.out.println("ProxyServer:::>res bundle init");
//set the mode of operation
this.setMode();
System.out.println("ProxyServer:::>mode set");
//set the system out and err --System.setOut etc
this.setSystemOutErr();
System.out.println("ProxyServer:::>in/out/err set");
}//End try
catch(Exception e)
System.out.println("Exception in init..."+(e.getMessage()));
throw new ServletException(e);
}//Edn
catch(Throwable e)
System.out.println("Irrecoverable Error...");
throw new ServletException(e);
}//End
}//End init
//method to init the resource bundle;
private void initResBundle()
this.resBundle = ServerResBundle.getBundle();
}//End
//method to set the mode of the server--proxy or direct
private void setMode()
//read the target proxy property from the bundle and
//if it is set,take that URL
String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
if ( (temp != null) && (temp.length() > 0) )
this.proxySet = true;
this.proxy = temp;
temp = null;
}//End
}//End
//method to set the system out and err etc
private void setSystemOutErr() throws Exception
//keep a copy of the original system out and error
this.sysOutOrig = System.out;
this.sysErrOrig = System.err;
try
//read the options adn if they are set, take the values directly
String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
if ((newOutStr != null) && (newOutStr.length() > 0))
System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
}//End if
if ((newErrStr != null) && (newErrStr.length() > 0))
System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
}//End if
}//End
catch(Exception e)
//restore the stuff
System.setOut(this.sysOutOrig);
System.setErr(this.sysErrOrig);
}//End
}//End
//this is where the proxy functionalities will be embedded
public void service(HttpServletRequest req,HttpServletResponse resp)
throws ServletException,java.io.IOException
//conenction URL
URL target = null;
//conenction to the remote object
URLConnection targetConn = null;
//stores the OOS and the OIS
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
try
//check for the mode of operation
if (proxySet)
URLConnection objects go through two phases: first they are created, then they are connected.
After being created, and before being connected, various options can be specified
(e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
if necessary.
//for the URL to the proxy
target=new URL(this.proxy);
//conenct to the proxy
targetConn = target.openConnection();
//set the details of the connectuon
targetConn.setDoInput(true);
targetConn.setDoOutput(true);
targetConn.setUseCaches(false);
// If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
targetConn.setAllowUserInteraction(true);
//connect to the remote object
// targetConn.connect();//call this only when all the request properties are set
System.out.println("ProxyServer:::>posting request");
//post the received request to the URL
this.postRequest(targetConn,req);
System.out.println("ProxyServer:::>posted request successfully");
System.out.println("ProxyServer:::>writing response");
//receive the response
//write the received response to the client
this.writeResponse(targetConn,resp);
System.out.println("ProxyServer:::>wrote response successfully");
}//End if
else
//currently this functionality is not supported
throw new ServletException(
(String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
}//End
}//End try
catch(Exception e)
if(e instanceof ServletException)
throw (ServletException)e;
}//End
if (e instanceof IOException)
throw (IOException)e;
}//End
//wrap it up in ServletException
throw new ServletException(e);
}//End
}//End
//method to write the response back to the client
private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
throws ServletException
//get all the header fields from the response connection and set them to the
//response of the servlet
Map headerFields = null;
Iterator headerFieldEntries = null;
Map.Entry header = null;
//stores the input stream to the conn
BufferedReader brConn = null;
//stores the writer to the response
PrintWriter prResp = null;
//checks if the proxy authentication needed or not
boolean proxyAuthReqd = false;
try
//juste ensuring that the proxy authentication is reset
proxyAuthReqd = false;
if( (targetConn != null) && (resp != null) )
//Returns an unmodifiable Map of the header fields.
//The Map keys are Strings that represent the response-header field names.
//Each Map value is an unmodifiable List of Strings that represents the corresponding
//field values
headerFields = targetConn.getHeaderFields();
//Returns a set view of the mappings contained in this map
Set temp = headerFields.entrySet();
//Returns an iterator over the elements in this set
headerFieldEntries = temp.iterator();
if (headerFieldEntries != null)
while (headerFieldEntries.hasNext())
Object tempHeader = headerFieldEntries.next();
if (tempHeader instanceof Map.Entry)
header = (Map.Entry)tempHeader;
Object headerName = header.getKey();
Object headerValue=header.getValue();
System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
//do not select the key-value pair if both the key adn the value are null
if ( ( headerName == null) && (headerValue == null) )
continue;
}//Enmd
if (headerValue != null)
List headerValList = null;
if (headerValue instanceof List)
headerValList = (List)headerValue;
}//End
if(headerValList != null)
for (int i=0;i<headerValList.size();i++)
Object headerValueStr = headerValList.get(i);
if (headerValueStr instanceof String)
//note that the header-key can not be null for addHeader
//I have made this temporary provision to make the programme work.
resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
(String)headerValueStr);
//check if the proxy authentication required or not
if (((String)headerValueStr).
indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
//proxy authentication is needed
proxyAuthReqd = true;
}//End
}//Ednd of
else if (headerValueStr == null)
resp.addHeader(( (headerName==null)? null :(String)headerName),
null);
}//End
}//End for
}//End if
}//End if
}//End
}//End while
}//End if
//get the writer to the client
prResp = resp.getWriter();
System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
//juste test a simple header
System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
//if the proxy asks you for authentication,pass on the same to the client
//from whom you have received the request.When this flag is true,the connection
//is closed by the remotehost adn hence any attempt to open in input steram
//results in an error ie IOException
if (!proxyAuthReqd)
//now get the content adn write it to the response too
brConn = new BufferedReader(new InputStreamReader(
targetConn.getInputStream()));
String tempStr = null;
while ((tempStr = brConn.readLine())!=null)
prResp.println(tempStr);
}//End while
//close the connections
brConn.close();
}//End if
else
prResp.println("Proxy Authentication needed...");
}//End
//close the streams
prResp.flush();
prResp.close();
}//End if
System.out.println("ProxyServer:::>writeResponse exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
//method to post request to the internet
private void postRequest(URLConnection targetConn,HttpServletRequest req)
throws ServletException
//extract the header parameters and the body content from the incoming request
//and set them to the new connection
Enumeration reqHeaders = null;
//reads the incoming request's content
BufferedReader brReqRd = null;
PrintWriter prResWt = null;
//stores temp header names and values
String headerName = null;
String headerValue = null;
try
if( (targetConn != null) && (req != null) )
reqHeaders = req.getHeaderNames();
//extract a header adn set it to the new connection
while (reqHeaders.hasMoreElements())
headerName = (String)(reqHeaders.nextElement());
headerValue = req.getHeader(headerName);
targetConn.setRequestProperty(headerName,headerValue);
System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
}//End
System.out.println("ProxyServer:::>postRequest\n");
//establis the actual connection
//calling this method bfore the above loop results in IllegalStateException
targetConn.connect();
//NOTE : try reading from and writing into OIS and OOS respectively
//now read the contents and write them to the connection
// brReqRd = req.getReader(); //this hangs for some reason
brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
System.out.println("Got the reader..brReqRd = "+brReqRd);
if (brReqRd != null)
String temp = null;
//establish the printwriter
// prResWt = new PrintWriter(targetConn.getOutputStream(),true);
prResWt = new PrintWriter(targetConn.getOutputStream());
System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
System.out.println("In while::>temp = "+temp);
prResWt.println(temp);
}//Emd while
//close the streams adn go back
brReqRd.close();
prResWt.flush();
prResWt.close();
}//End
}//End outer if
System.out.println("ProxyServer:::>postRequest exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
}//EndHi serlank ,
Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks... -
Problem with the hierarchial fields in a Purchase order xml report
Hi,
I am having a problem with the hierarchy problem. We are populating attribute 15 of a PO header. some times it can be null. FYI, we are using 11.5.10 instance where oracle supports direct PO template rather than having a rdf file.
And now in the xml report, if attribute15 of po header is not null then it is fine.
But if attribute15 is null, then the template is picking from the next available attribute15 that is from the po lines. As the line level group of "LINES" is between the "PO_DATA" (header group), hence the template is checking for next available attribute15.
Can any one please suggest how to design the template where we can make the template to check only for that tag at the header level group rather than the line level group tag?
Thank You in advance.
Regards,
Srinivas.Hi
Incase you want to transfer attachements from SRM to R/3, then you try implementing the BADI in SRM side. The BADI which will help in this case is
<b>BBP_CREATE_PO_BACK</b> BADI.
<b>Please read the standard SAP documentation of this BADI using SE18 Transaction, before making any code changes.</b>
<u>Few Important SAP OSS notes to refer in this case -></u>
Note 989184 - Transferred shopping cart with internal attachments
Note 550071 - FAQ: EBP - Shopping Cart
Note 916347 - Transfer shopping cart with internal attachments
Note 1001130 - FAQ - Attachment questions (Buyside)
<u>Few useful links -></u>
<b>http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
Re: Attachments to backend
Re: Document Attachments in Shopping Cart
Re: Attachment in SRM
Re: SRM Documents and Attachments
Re: Limit in Attachments of an item in Shopping Cart
Re: return delivery text from material document is not passed to SUS
</b>
Do let me know, incase you face any problems.
Regards
- Atul
Maybe you are looking for
-
Classic not showing on desktop - but it is in system profiler
I have an iPod classic that is showing up in my system profiler, but not on my desktop. The face of the unit says that it is connected - but iTunes will not recognize it. Please help. Thanks
-
Honda Music Link and nano problem
I have a new Honda Music link and it will not work with my 2G nano... I am assuming it is a firmware isssue like the regular 5th gen ipods however Honda does not have any answers as to which firmware version works with their product. I keep getting a
-
Problem with pc suite for 8800 please help
i have my nokia 8800 and want to send up some games, i have a usb bluetooth device and when nokia pc suit goes to pair with phone it says ok on the phone then on the pc it says Can not authorize phone, no com port available, please make a free com po
-
I have two boxes, an eeepc laptop with integrated sound and a desktop with onboard sound and usb e-mu 0202 and bluetooth headset which i plug in either of boxes. Both pulseaudio servers are told with paprefs to share their devices and discover others
-
Screen freezing and desktop acting strange
A few days ago my wife was using my computer and tried to add a screen saver using some photos on my computer. She never did save the screen saver. But since then my desktop has blocks of color showing up in different portions of the screen. Sometime