Problems with the language in mac os lino

I was using CleanMyMac and accidentally I delete the iso spanish. Now the language of the windows is set in english. How can I do? Thanks a lot.

Ruben Alberto Restrepo wrote:
I was using CleanMyMac and accidentally I delete the iso spanish.
"iso spanish" is a keyboard and has nothing to do with the language of your windows, only for typing.
But if you have Español at the top of the list in system preferences/language & text/language and everything is in English, then like Frank said you should reinstall your OS.

Similar Messages

Why are there so many problems with the early 2008 Mac Pro ???

Hi everybody out there using Mac Pro's early 2008,
I found out there is a lot of problems with the early 2008 Mac Pro.
My early 2008 Mac Pro has been repaired ones under warranty and now it stopped working again ! Also see under: Mac Pro early 2008 no chime and does not start up. Why is this ????
It worked well for about 2 years and then it just fails and i had this failing issue twice already !!! Is this just a BAD Apple product or how do you think I need to approach this. Let’s face it, these machine don’t come cheap and you at least expect them to work without problems for 4-5 years. What is happening here ???
Cheers, Kavango

go to a black screen after 15 minutes or a couple hours
That is probably an indication that you need to find a new graphics card.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

OpenLDAP Server have Problems with the automounter of Mac OSX 10.5.5 client

Hi,
we are using OpenLDAP Server on a Debian OS base. I had connect the LDAP Server with the MACMini with Mac OSX 10.5.5. The LDAP Server is based on OpenLDAP running on Debian Linux.
The Users can login on the Mac Computers and they do have the right goups. I have a problem with the autompunterMaps because the homes and volumes are not mounted in the Mac environment. So the users have a different home directory at each computer and no volumes to work with.
The LDIF I use for the automounter is following:
dn: ou=automaster_directlinx86, ou=autofs, ou=ai,
dc=TechFak,dc=Uni-Bielefe
ld,dc=DE
ou: automaster_directlinx86
objectClass: top
objectClass: automountMap
dn: cn=\/homes, ou=automaster_directlinx86, ou=autofs, ou=ai,
dc=TechFak,dc
=Uni-Bielefeld,dc=DE
objectClass: automount
automountInformation:
ldap:ldap.TechFak.Uni-Bielefeld.DE:ou=auto_homes,ou=aut
ofs,ou=ai,dc=TechFak,dc=Uni-Bielefeld,dc=DE -nosuid,nobrowse
cn: /homes
dn: cn=\/vol, ou=automaster_directlinx86, ou=autofs, ou=ai,
dc=TechFak,dc=U
ni-Bielefeld,dc=DE
objectClass: automount
automountInformation:
ldap:ldap.TechFak.Uni-Bielefeld.DE:ou=autovollinx86,o
u=autofs,ou=ai,dc=TechFak,dc=Uni-Bielefeld,dc=DE
cn: /vol
dn: ou=autovollinx86, ou=autofs, ou=ai, dc=TechFak,dc=Uni-Bielefeld,dc=DE
ou: autovollinx86
objectClass: automountMap
dn: cn=ai, ou=autovollinx86, ou=autofs, ou=ai,
dc=TechFak,dc=Uni-Bielefeld,
dc=DE
objectClass: automount
automountInformation: -rw,intr,nolock thor:/export/ai/external/vol/&
cn: ai
dn: cn=airobots, ou=autovollinx86, ou=autofs, ou=ai,
dc=TechFak,dc=Uni-Biel
efeld,dc=DE
objectClass: automount
automountInformation: -rw,intr,nolock thor:/export/ai/external/vol/&
cn: airobots
dn: cn=mobirob, ou=autovollinx86, ou=autofs, ou=ai,
dc=TechFak,dc=Uni-Biele
feld,dc=DE
objectClass: automount
automountInformation: -rw,intr,nolock thor:/export/ai/external/vol/&
cn: mobirob
dn: ou=auto_homes, ou=autofs, ou=ai, dc=TechFak,dc=Uni-Bielefeld,dc=DE
ou: auto_homes
objectClass: automountMap
dn: cn=efrese, ou=auto_homes, ou=autofs, ou=ai,
dc=TechFak,dc=Uni-Bielefeld,d
c=DE
objectClass: automount
automountInformation: thor:/export/ai/external/homes/staff/&
cn: efrese
dn: cn=fsiepman, ou=auto_homes, ou=autofs, ou=ai,
dc=TechFak,dc=Uni-Bielefeld
,dc=DE
objectClass: automount
automountInformation: thor:/export/ai/external/homes/staff/&
cn: fsiepman
dn: cn=fyuan, ou=auto_homes, ou=autofs, ou=ai,
dc=TechFak,dc=Uni-Bielefeld,dc
=DE
objectClass: automount
automountInformation: thor:/export/ai/external/homes/staff/&
cn: fyuan
In the /etc/auto_master I added the line
SRC base="ou=ai, dc=TechFak,dc=Uni-Bielefeld,dc=DE" scope=ALL
filter="(&(|(objectClass=automount))"
to mount the /volumes but just the volume /vol and /homes are mounted to the Mac OS System.
Thanks.

Hi.
Have a look at http://www.afp548.com/article.php?story=20061126220622764
and there is very good information in Apple's training texts for 10.5 server.
You can buy the print book or purchase an account with Safari Books in order to read it online,
see
http://my.safaribooksonline.com/9780321591067
Chpt 3 is on working with 3rd-party OpenLDAP servers

Problems with the language in the menu bar

I have a G5 PPC 970 (2.2) OSX10.3.9
The language selected in the Preferences System (International) is the Spanish
When I am on the desktop menu bar appears in English (File, Edit ...).
If for example I click on File its appears a submenu with texts in English and Spanish.
If I click on System Preferences language that appears is Spanish.
I upgraded the system with MacOSXUpdateCombo10.3.9.dmg and the problem continues.
What can I do?
Thanks
Tengo un G5 PPC 970 (2.2) OSX10.3.9
El idioma seleccionado en las Preferencias del Sistema (Internacional) es el español
Cuando estoy en el escritorio la barra de menu aparece en ingles (File, Edit...).
Si hago click por ejemplo en Archivo se desplega un submenu con textos en ingles y español.
Si hago click en Preferencias de Sistema el idioma que aparece es español.
He actualizado el sistema con MacOSXUpdateCombo10.3.9.dmg y el problema continua.
¿Que puedo hacer?
Gracias

Yes, I've an Asus ENGT220/G/DI/1GD3, tried Windows default pilot, 2009 Asus pilot "nv19045_Win7Vista64.zip", and 2010 latest version "nv25919_Win7Vista64.zip", no change !
More, I've exchanged the video car by a "monster" ENGTX465 with it's driver, NO CHANGE !
So what to do ?!
Help, please !

Problems with the languages in my windows

I have made an aplication that uses some windows. In these windows appears some buttons. My problem is that the words in the buttons appears in english in some computers and in spanish in others. How can I do for set the language in spanish?
For example, in some computers is written "Aceptar" and in others "OK".
Thanks.

I can't copy it exactly since I don't know this account's PW and I only have it saved on this comp (my imac) but I can type it.
Also, it's having a problem it had before in that it's not going to sleep when I go to apple menu -> sleep. It takes either a few tries or it takes a little bit to go to sleep.
BatteryInformation:
Model Information:
Serial Number: W0020TU7LE1LA
Manufacturer: SMP
Device name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0201
Hardware Revision: 000a
Cell Revision: 0165
Charge Information:
Charge remaining (mAh):            4741
Fully charged:            Yes
Charging:            No
Full charge capacity (mAh):            4834
Health Information:
Cycle count:   229
Condition:   Normal
Battery Installed:       Yes
Amperage (mA):       -1364
Voltage (mV):       12203
SystemPower Settings:
AC Power:
System Sleep Timer (Minutes):       10
Disk Sleep Timer (Minutes):       10
Display Sleep Timer (Minutes):       5
Wake On AC Change:       No
Wake On Clamshell Open:       Yes
Wake On LAN:       No
Display Sleep Uses Dim:       Yes
Battery Power:
System Sleep Timer (Minutes):       10
Disk Sleep Timer (Minutes):       10
Display Sleep Timer (Minutes):       5
Wake On AC Change:       No
Wake On Clamshell Open:       Yes
Current Power Source:       Yes
Display Sleep Uses Dim:       Yes
Reduce Brightness:       Yes
HardwareConfiguration:
UPS Installed:       No
ACCharger Information:
Connected:           No
Charging:           No

Problem with the language on certain apps

Hello,
I just restored my iPhone. After I open the phone at the first time after I restored it, it asked me what language I want to use on my phone, in a mistake I clicked chinese. Then I clicked go back and chose my language, and I did the process to set up the phone after the restore.
I downloaded some apps but some apps is in chinese and some apps in the right language they should be(for example Facebook, Quickoffice and Skype is in chinese. Google, Google drive and ebay in the right language). What do i need to do to fix the problem? I need to restore again?
Thanks!

I changed the language of my phone to English and changed back to my language and everything is fine.
iOS 7 full of bugs..

I have problems with the language when i install i put another language how can i repair that

I need help because i was instaling first time my apple tv and whm i was going to select my language y press another one that i dont undestand , please can some one help me with this ?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Problems with the language

When I start the out loud reading the digital voice starts spelling the words in English but I'm Italian so it isn't useful.. How can I change language? Thank You

If you are talking about using the beta version of ADE 1.8, then you will have to wait for the release version, as the beta version is only available in English.

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

HT1998 I have what I believe, though I am not certain, an Airport Extreme 1st generation. My internet speeds on my hardwired pc are running in half and a bit higher on my Mac Pro. Cable claims it is a problem with the router since I can bring the PC speed

Bear with me please as I have never used the community before. I have an Airport Extreme 1st generation at least I think it is a 1st generation. My PC is hardwired and my Mac Pro, obviously wireless. I have 50/8 mbps service but the speeds on my PC run around 20/8 and 30/8 on the Mac. Cable says it is a problem with the airport since my PC speeds rise to 50 when the airport is disconnected. Does anyone know what to do?

The simplest way would be to perform a "soft" reset on the AEBS. This type of reset will temporarily disable all of the AEBS's passwords up to five minutes. This should give you ample time to access the AEBS with the AirPort Utility to change it.
If you don't want to actually change the password, then you can possibly retrieve the password from the OS X Keychain, as follows:
Run the Keychain Access utility found in \Applications\Utilities
In the category column (on the left side of the utilities' window), select "All Items."
In the right column look for your Network Name. It will have a "Kind" of "AirPort network password."
Double-click on your network name listing.
Click on "Show password."
Enter your Mac's administrator's password
Your wireless network's password should now be displayed.

I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes

I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes: I downloaded the last version (it's free), but I cannot do the same with iphoto, and more important: I need to know what is happening!!! Please help me!

Applications should not disappear all by themselves.
If they are then that coud indicate serious problems with your hard drive.
Backup everything up as quickly as possible.
Using Disk Utility verify your system disk.
Allan

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

By doing a Google search.

Lightroom 5, Mac. Problem with the Radial Tool. Marquee Lines disappear.

Lightroom 5 Mac. Problem with the Radial Tool. I use this tool a lot. I must have hit a hot key by accident because between photos the marquee lines have disappeared and i don't know how to get them back. Without the marquee lines there I cannot rotate or expand the radial tool.

I have attempted to uninstall, empty trash and a fresh download from Adobe. The problem is still there...

I installed Adobe CS6 Design & Web Premium on my Mac Book Pro a few years ago but have repeatedly encountered problems with the programs freezing or not opening properly. It's a Student and Teacher Licensing version so an academic ID is required but I am

I installed Adobe CS6 Design & Web Premium on my Mac Book Pro a few years ago but have repeatedly encountered problems with the programs freezing or not opening properly. It's a Student and Teacher Licensing version so an academic ID is required but I am no longer a student--can I still reinstall it since my academic ID may no longer be valid?

Erin Elzo as long as the serial number has been registered under your account at http://www.adobe.com/ then you should be able to continue to utilize the software. You can find details on how to locate your registered serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

Problems with the language in mac os lino

Similar Messages

Maybe you are looking for