Problems with the last update.

Since the last update I can not write Bluray. This message appears. Can anyone help?

Take a look at this thread. Blu-Ray burning error after Final Cut Pro 10.1.2 update.
Russ

Similar Messages

Was there a problem with the last update? Every time I try to watch a video on the net it goes back to the home screen

Was there a problem with the last update? Every time I try to watch videos it goes back to the home screen

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have a problem with the last update of iphoto.

I have recently updated iphoto (version 9.5.1) In Mavericks. My iphoto gallery is ok, the problem is that I have a book project and I can't have it sent to get it print. It gives me an error and it freezes.
Anybody can tell me how to fix this problem?

MacBook Pro forum and support:
http://www.apple.com/support/macbookpro
there isn't a lot you can do - some - with laptops that overheat or run too hot other than get it serviced.

Problems with the windows update site in 32-bit Vista Business

Hi Everyone,
I am experiencing problems with the windows update site. As far as I know it shold make a link to the Windows Update module on-board and show the available updates after scanning. However, I get to the page that says "Checking if your computer has the latest version of Windows updating software for use with this website" and the next page I get is "The website has encountered a problem and cannot display the page you are trying to view". The error number is 0x80070002. I go to the knowledge base and delete the content of the Data Store folder as advised, but to no use at all. Active X controls are enabled Java is working fine. I've cleaned the register and everything, did a complete scan with Onecare as advised by Microsoft, which did not find anything but again the same error message. I am using KIS 2009 and I am sure I have no viruses or any other malware. I even tried to go to the update site with the KIS switched off but to no avail too. On the other hand I don't have problems with the automtic updates and when I run a manual update from the Update module everything is OK. Do you have any suggestion as to what might be the issue with the website updates?
P.S. I am using 32-bit Windows Vista Business on a Lenovo W500.

hello
You may be having a problem with the windows update agent.Since its a problem relating to windows update microsoft support personnel may help you out.follow this link and contact them by chat or email
http://support.microsoft.com/common/international.aspx?gprid=6527&acty=Start&ctl=Region&wf=Workflow&...
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

URGENT!!! Problems with the last version 14.2.1

Hello, I have a problem with the latest update of PS CC two iMac in the company where I work, is that updated to the latest version and have recurring problems, for example, when using the Transform an object tool, the object changes, shown with noise or change the opacity and you can not edit, or also adding some other effect is the result: a distorted image. I think that's the latest update of PS because I have no such problems, because even I do not upgrade to version 14.2.1. Please I need your help, as our work at the agency is compromised with the delays that this causes us. Greetings and thanks! I'll be waiting for an answer.

Lo siento mucho, aquí va el problema en español:
Buenos días, tengo un problema con la última actualización de PS CC en dos iMac en la empresa donde trabajo, resulta que actualizaron a la última versión y tienen problemas recurrentes, por ejemplo: al utilizar la herramienta Transformar en un objeto, éste objeto cambia, se muestra con ruido o cambia la opacidad y no es posible editarlo, o también agregando algún efecto el resultado es otro: una imagen distorsionada. Creo que es por la última actualización de PS ya que yo no tengo esos problemas, porque aún no actualizo a la versión 14.2.1. Por favor necesito su ayuda, ya que nuestro trabajo en la agencia se ve comprometido con los retrasos que esto nos ocasiona. Saludos y gracias! Estaré a la espera de una respuesta.
Muchas gracias!!!

I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?

I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

I lost my spell check with the last update

I lost my spell check icon with the last update from firefox. I would like to have it back.

I don't think Firefox normally has a spell-check icon. Was it on an add-on toolbar? Do you recall Firefox saying that particular add-ons would be disabled for compatibility reasons?
Let me guess that you used the spell check on the Google toolbar. Extensions for Firefox, such as the Google Toolbar, include a list of compatible Firefox versions. Currently, the Google Toolbar only goes up to Firefox 4. However, people have tested and it actually works on Firefox 5, so there are two workarounds:
(1) Edit a file to revise the range of compatible versions
(2) Install an add-on that lets you ignore the range of compatible versions
This thread has info on both approaches: [https://support.mozilla.com/en-US/questions/837142 google toolbar does not work with firefox 5.0. why not! | Firefox Support Forum | Firefox Help].
If it wasn't the Google Toolbar, a similar strategy still might work...

HT1369 with the last update I can not longer connect my iphones to iTunes - Is there an update to fix this?

with the last update I can not longer connect my iphones to iTunes - Is there an update to fix this?

Hello wendellfromva,
The following article provides tips that can help get your iPhone to reappear in iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

I am having major problems with the latest update for my itunes!

I am having problems with the latest update for itunes, it says 'itunes has an invalid signature'. I have completely uninstalled itunes but now it wont download at all. Have tried downloading it 4 times tonight already. Anyone know how to get it to download? Or what to do?

I am having problems with the latest update for itunes, it says 'itunes has an invalid signature'.
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

HT5501 Somebody can tell me what is going on with the last update 10.8.2??I updated and since two days ago my computer is blocking with safari and is getting pretty much slower than before??

Can somebody tell me what is going on with the last update of Mountain Lion 10.8.2?? Since then my computer is pretty much slower and blocken on Safari.

First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.

I did not update my iPad 3 with the last update, will that affect me updating to IOS 6?

I did not update my iPad 3 with the last update, will that affect me updating to the new IOS 6? Will I get all the updates I missed in the previous update if I update to IOS 6. If not, tell me where to go to get the last update before I update to IOS 6. I thought I had time before this new one came out. Thanks for any help I get.

You can update directly to iOS 6 now. Not updating to iOS 5.1.1 does not matter. If you have updated the iPad before, you know what to do.

WIFI problem with the last time machine update

When Apple released the last update for time machine via "software update" I did that as I usually do on my macbook intel core 2 duo 1,83. It was like two months ago and I remeber there were some other updates together. After rebooting the machine I had no chance to connecting to my wifi anymore (using a NETGEAR router) and I went crazy trying to find the problem. In a forum somewhere on the web I found someone else having the same problem that was related to that "time Machine" update. The only solution (extreme) was to reinstalling the OS and, doing all the updates except for time machine
Yesterday Apple released the new 10.5.3 and without thinking about I did the update today ... and now it doesn't connect to wifi again.
Anyone experienced the same problem?
Anyone has a solution to that or just how to remove this time machine stuff?
Thanks ---

The project is 5 minutes long, but I cannot export any other project, even the short ones (few seconds).
Whereas, if I try to export a project that I already exported in the past, that one I can export.
The source is only pictures. Thousands of pictures for a stopmotion project. But as I said, it doesn't work neither with other minor projects
I don't really know what to do.
Does anybody know if I can downgrade the software?
Thanks for suppot
Cheers
Marco

Just admit there is a problem with the latest update.

Why keep telling people to uninstall, install, update, test, check, double check, test again....When all the solutions being suggested just don't work for most people.
There is obviously a big problem, over the last two days i have done almost everything that has been suggested, and more, and still there is a problem on both computers in my home.

Hi, What you are describing is called Troubleshooting. It would be very easy if your opinion was true, but it isn't. Have you ever read the multiple Microsoft, Firefox, Apple, Motorola, AT&T, Sprint, Verizon, HP, Youtube and Dell FORUMS? Well, I have and do and I can tell you I'm surprised that Adobe Flash Player can design a Flash Player to work in and around all of those Operating Systems and Technology Companies!! And there are hundreds of more companies that I do not have time to mention.
And no, I am not an Employee of Adobe.
Not every solution is going to work for every computer configuration, that is #1.
When people take their computers in for repair, there is an advantage, to wit: they have the computer and they can see and test it.
Here on the Forum, we that help don't have that advantage. That is why the questions are asked and various actions are requested.
If you want help, reply back with your operating system and browser(s) versions.
Thanks,
eidnolb

Stability problems since the last update

hey there,
It's really easy and intuitive to work with Muse but since the last update I am facing a lot of stability problems with the software, just wanted to know if some of you do so too or I should reinstall it. Here are the Major Problems,
- Zoning in further than 125/150 % will crash the program
-I am currently working on a 30mb (muse file size) big homepage about 8000px long. I didn't have any problems when stretching the page so long in the beginning but now the program will crash as soon I try so change the site length, including click an drag at the bottom and manual input via site->site properties.
I work with Windows 7x64, a I7-3770 and 16gb Ram.
I use the other products of the CC as well and didn't face any stability problems so far even though i think some of them need way more workingpower :/
So, what do you think?
All the best, Lucas

If you have a large image on the page that was imported using File > Place or as part of a slideshow and it's being cropped in Muse, zooming in/out on the page can trigger a crash. I wish I could say this was newly introduced, but it's not. It's a bug we've been living with for awhile because the fix requires significant architectural changes. We've made those changes for the next major release (due out later this quarter), but this bug is still in Muse 7.
You can avoid this crash by resizing and cropping the image(s) outside of Muse before bringing them into Muse.
If you're interested in working with the new release in Beta, all subscribers who can accept the terms of the Non-disclosure Agreement are invited to join the Adobe Muse Private Beta Program at http://museprerelease.com
The crash when changing Site Properties may, or may not, be related to the large image(s). Can you provide a screenshot of any errors that appear? Thanks.

Problems with the last version of iuines

I have problem with the two last versions, I Can't clouse the program and the computer fail. I must restart the computer

Try the steps given in the link below....Remember....,install the old version,if this problem persists
http://forums.adobe.com/message/4041846#4041846

Problems with the last update.

Similar Messages

Maybe you are looking for