Problems with the Losing Release Strategies Approvals in PO.

Hi Experts,
We're using the BBP_WFL_APPROV_BADI for Purchase Orders (WS14000145) the source code of BADI works fine.
I can define all the approvers as source code.
I'm making any text modification in the PO with status Awaiting Approval. This works fine, but I have a problems when i make the modification in the PO ( Document Approved ) with status ordered or Error in Process , if I make the simple modification (explo. text modification) the release strategie is re-starting again, losing all the approvers and approvalls. We need that modification not start the release strategy again.
The re-start should be make only for values modifications (Price, Quantity).
There is other problem with approvals preview too, the approval's preview with the ordering of approvals dissapears. When
I make the same modification in PO with ordered status.
Thanks

Hi Masa, How are you?
I check the table BBPD_COMP_FIELDS but i didnt understand anything...I need to make tho desactivate the re-start of release strategies..WHen I make a smple modification in the PO ( for explo text documents).
I my process now..if I make the modification in the PO with status orderer ( any modification) the system re-start the approvals levels...I need re-start only for value modifications...Could you help me?
Thanks,
Gustavo Nogueira

Similar Messages

Has anyone had any problems with the 10.0.3 upgrade?

I'm running WinXP and presently have Adobe Reader 9.4.3. Before I upgrade I would like to find out if anyone has had any problems with the new release? The last time I upgraded an Adobe product (Flash) it screwed up my ability to watch videos on my browser.
Any information would be appreciated.
Thanks,
Spin45

Adobe Reader has the original 10.0.0 with its associated vulnerabilities and the patch of 10.0.1 which seems unable to run in protected mode in my environment or any that have roaming profiles. The vulnerabilities that prompted the last two patches (would have been 10.0.2 and 10.0.3) have been forgone by Adobe, because "Protected Mode mitigates those vulenrabilities". See here: http://www.adobe.com/support/security/bulletins/apsb11-06.html
and here: http://www.adobe.com/support/security/advisories/apsa11-02.html
In my opinion, Reader X is not ready, they are soliciting for testers for a new release. Version 9 with its attendant problems seems to be the only viable solution for me, if I can get the patches to apply properly, and the installer to work properly.

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

I installed lv 6.1 on a windows 98 system. As I am having problems of stability (much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch.

I installed lv 6.1 on a windows 98 system. As I am having problems of stability (frequent crashes, much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch available.

My experience with Win98 is that it is not a very stable system, regardless of software used. For example, Win2000 and XP are far more stable than 98. I've had it crash on its own if I leave the computer on for several days.
I wouldn't recommend running programs for long time (few days) on this OS.
This being said, can you be more specific in your question. What kind of stability problems did you have, which VIs did you run (if possible post them here), did you change the interrupts and priority levels on those VI, do you get error messages or blue screen....
Zvezdana S.

Problems with the Fios 20/5 connection speed in my area dropping down to less than 3mbs.

I have written out a flyer that I plan to go door to door with. Since I am under contract with Verizon, I am forced to honor my side of the contract. Even if they are allowed to make me pay for a service that I am not completely getting. I am very displeased and as soon as my contract is up, I will change back to My local cable companies all in one that does not require a contract and has no issue such as the one I am having.
Do you have Verizon Fios Internet?
Are you on the 20/5 connection?
If so, you may not be getting the speed you are paying for. I am on a 20/5 connection and when my computer is on for longer than an hour the internet download speed with Verizon Fios starts to slow down until it is below 3mbs. It takes about 24 hours to get down to 3mbs but only about an hour or two to get down to about 6-7mbs when I am paying for 20mbs…
I have 3 computers in my home that have Windows Vista, Windows XP home edition and Windows Media Edition 2005. All of the computers run into this same exact issue, I have tried every setting I could think of with my 24 years of computer technical experience. I finally took one machine with Windows XP and ran a full format on the hard drive and reinstalled a fresh Windows Xp Operating system onto the hard drive so it is a bare bones OS. This way there is no other software on the machine that could possibly be causing the problem and found that when I connected online through Verizon Fios the machine still ran into the same exact issue. This proves to me that the issue is not on any of my machines.
Now all of this time my buddy that lives 1.2 miles away from my house has been having the same issue with three computers at his home also. He has Windows Vista on two machines and Windows XP Pro on one.
When I concluded that it was a Verizon Fios issue, after a few months of trying to get by, researching, diagnosing and losing much information in order to verify it was on Verizon’s side, I contacted technical support at Verizon’s online website. The agent and I went through the regular procedure that anyone would have to go through and I patiently explained what I had done to try to diagnose the issue. The agent came to the conclusion that he could not figure out the problem so he guessed that the Verizon router/modem may be the issue and told me he would send me a new one by mail.
I received the new Verizon router/modem, installed it and had to call to have it activated. Afterward it still had the same exact issue as the prior router/modem. So now we know it’s not my computers, it’s not the router/modem. My Verizon router/modem is connected right at the Optical Network Terminal (ONT), which is the box that connects the fiber-optics to your home, usually just inside or outside your garage wall. Mine is just outside…
From here my buddy, who has been having this problem also the entire time, called the local office of Verizon Fios and an installer was setup to come over to his home and trouble shoot the issue. My buddy called me and told me when the installer was headed to his home and I met him at his home to see what the installer found and in hope that my issue would be fixed at the same time. The installer went through the system at his house and was frustrated about not finding the reason for the issue and ready to leave without fixing anything. I simply asked that he stay long enough to see the issue present itself within an hour-hour and a half.
His laptop itself already showed the speed drop from 20mbs to between 16-17mbs, it was on its way down. He basically told us something that online tech support already stated to me, it is extremely difficult to prove it is on Verizon’s side. In other words it is extremely difficult to prove it, in a way that will convince Verizon to check its own servers, routers and software updates to their own systems. The installer, good guy, couldn’t/wouldn’t stay but we did convince him not to simply drop the issue. He called shop and they sent another installer out to take over the issue.
The new installer, great guy, got up to speed on what was already done at my buddies home. The first installer, checked and replaced the Verizon router/modem, checked the wiring and splitters. Basically went through the entire system up to the Optical Network Terminal (ONT), the box that connects the fiber-optics to your home. He pulled and replaced the Optical Network Terminal (ONT), thinking that perhaps the unit was compromised. While he was doing this job a tech was called and asked to stop by for assistance with the issue. The tech checked the computers inside and tried to do some settings that the main office informed him to try. I explained to the tech that the same issue was happening at my house, that I went through every setting I could think of and find online to help alleviate the issue. After some shop talk about what I had tried, including the full format and reinstall of the operating system on one of my machines, he just as I came to the conclusion that it couldn’t be with the computers and since everything that had to do with the Verizon Fios system from the street to the end-user computer had been checked, verified and/or replaced, the issue had to be coming from Verizon’s main office.
The installer had already checked the main at the road that has the 3x2 green service cover on it by the side walk. Everything was in good working order. The tech called the main office to see if my buddy and I were on the same hub, basically a big splitter that continues the service from the main office to the homes, we were not. So that was ruled out…
My understanding of the system ends there. The only other components I know of are the Main branch’s routers, servers and software.
Verizon had a new connection speed added to their system, 25/15 about the same time our issue began. So I am guessing that when they updated the system to include this new connection speed they corrupted the software for the 20/5 connection.
We have been waiting to hear from the tech that was at my buddy’s house, to see if the issue will be dealt with. My buddy has called him a couple of times and he has mentioned that he is trying to get it addressed and to call back if we hadn’t heard from him. He remembered who he and I were and what the issue was, so I believe he is taking it seriously. How far he can move the issue is beyond me…
I want to add that my buddy and I have been customers with the all in one package from Verizon Fios since their services have moved into our area, about a year and a half… It has only been since about June that this issue has presented itself, before then we were on 7th heaven with the speeds. We couldn’t have been more than happy with the services.
This issue has caused that to all go afoul, not only do the speeds get down to less than 3mbs but the speed is not smooth at all. Rather the 3mbs speed is stop and go, freezing in between at times, very choppy. Barely usable at times, unless you restart the computers and start over.
We are hoping that anyone with Verizon Fios Internet Services will keep an eye on their speeds by going to http://speedtest.net and doing tests to verify they are getting the speeds they are paying Verizon for.
This is what it will take for Verizon to take this issue seriously is to gather everyone on the system that may be having the same issue. I believe it is everyone that is within the 1.2 miles from my house to my buddy’s and will distribute flyers to each and every house in between.
If you find that your speed is not as fast as it should be please contact me and I will add you to the list, this way we can see exactly how far this problem covers and perhaps it will also help to show a pattern and understanding as to why the issue is present in the first place.
My contact information,
I have left this out here, you can contact me on these forums...

Actually what this came down to was an issue between Windows Vista and an Ethernet Card on one of the machines in each of our local networks.
Even though our two machines are 6 years apart, we both have the same ethernet adapter on our main desktops. A RealTek RTL8139/810x Family Fast Ethernet Nic. It seems that the adapter does not work at the 20mbs download speeds with Vista. For some reason the adapter does not shut down when the computer does? I don't understand why but it doesn't, it keeps the connection alive. I removed the ethernet cable and pulled the power cable and had my two other computers still connected to the network and found that the issue was resolved. The way I found out was that I used the connections on my main computer to hook up one I had laying around and through further testing found the problem no longer existed...
Then I realized that my buddy and I installed Windows Vista at about the same time, a couple of months ago. Funny how you can forget an important detail like that. Then I remembered that he had the same identical ethernet adapter as I did, I had noticed that while trouble shooting his computer at his home but didn't think it was important at the time. Until the issue was narrowed down to the adapter, then it all seemed to all fall into line.
Quite humbling... In the end, anyone who has Windows Vista and this NIC probably will have problems with the 20mbs download speed of the computers on their own networks. I tried the latest Vista driver from RealTek and also tried to roll back the driver, with no success....
Back at the beginning when we first had fios installed in our homes there wasn't an issue when we had the 10/2 speeds and had Vista. Then we decided to change from Vista to XP because we both were having issues as to what programs you could use and which you could not, shortly after having fios installed. Then when verizon upgraded us to 20/5 we were amazed at the speed and still had no issue because we had XP on our main computers with the RealTek adapters...
We reinstalled Vista because it seemed like we were having more issues with XP by getting hit with Antivirus2008 and its variants and thought it time for a change back...
It didn't really hit us that Vista could be the culprit because we both have a laptop in our networks that have had Vista on them from the get go when there were no issues... We also didn't notice just how bad it was right away and over time kind of left the Vista install out of the equation.
Just strange that one computer can effect all the other computers on the network, even when it is shut down...
I allowed the other two computers to run 24hours and the issue did not present itself, when I added the main computer with the RealTek adapter back to the mix it reappeared. The Realtek adapter is the only real common denominator between his machine and mine.
So now we have three choices,
We can go back to Windows XP.
We can buy a new NIC or a wireless card to replace the RealTek...
Hopefully this post will help anyone else who runs into this problem, it has been very frustrating to say the least...
Thanks to everyone for their help and I apologize for complaining about verizon when it was not a verizon issue. I came to the conclusion that the only part verizon really played was upgrading us to a 20/5 tier which I am thankful for...
Would be nice if this card was on a list that Verizon support could use to troubleshoot , diagnose or eliminate for future support issues.
Message Edited by keiser0619 on 08-06-2009 03:58 PM

I got my iphone 5 3 weeks ago and the battery life is very short. It drains out very fast. Does anyone know if it's a problem with the iOS or with my phone? Because I'm a bit concerned

I recieved my iPhone 5 3 weeks ago and the battery life completely *****! After doing a few things and maybe using it for about 30 minutes the phone start overheating like crazy then the battery starts dropping very fast. Does anyone know if it's a problem with the iOS or with my phone? And is anyone else expierenceing these problems?

It sounds like you have an app that is incorrectly continuously using data and power... from normal use the phone should NOT be getting that warm... only constant video playing via data like Netflix for example would result in that...
I'd say that you should remove all apps in the recent app tray... tunr phone off... then once you power back on...
Hold BOTH home and sleep wake buttons together until you see a white apple symbol... then release both buttons...
This will ensure you have no apps running...
I've experienced a hang up with mail while out and about that has resulted in this on my iPhone as well... Once I performed these steps it was fixed... it seemed like it got stuck and that's what caused the warm phone and battery drain...
I notived that when it gets stuck (mail app that is) I will see the text connecting at the bottom and it never changes to "updated" like it should... this is my trigger that it's gotten stuck.
Have not really figured out what causes mail app to get stuck yet...

Problems with the (WINDOWS 8 pro -64 BIT) IN THINKPAD L520 - 5016 RL2

I have some problems with the (WINDOWS 8 pro -64 BIT) is not working properly IN THINKPAD L520 - 5016 RL2.
1. Message appears telling me that the drivers of the display has been restored crash.
2. The mouse pointer moves very slowly sometimes, and sometimes does not move for a while.
3. Device software such as lenovo-airbag protection , lenovo-internet connection and lenovo web connection........ its is not compatible with the system, and do not work.
What is the solution؟

Hi, MUJAHED
I have a few questions for clarification I would like to ask about your first two issues:
1) Can you copy the contents of this message and respond back with them. Any error codes or direct quotation from the system can really help in diagnosing a problem.
2) Does this only apply to the TrackPad, or does this behavior also occur with an external mouse? It may help to download the latest mouse drivers for your system, which can be found here.
As for your last issue with the Lenovo service not being compatible with the system: Unfortunately, software for these applications has not been released for Windows 8. Windows has its own network settings that you can use to connect to the Internet and networks, so that is still possible, though you may not enjoy it as much as Lenovo's program.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Upon firefox update this morning, every window opens with error: CaptureMovieFox could not be initialized. Some files of the extension may be missing or there is a problem with the Firefox.

upon firefox update this morning, every window opens with this error in a popup: ''CaptureMovieFox could not be initialized. Some files of the extension may be missing or there is a problem with the Firefox.''
when I close the popup, the original window opens seemingly without issue.

http://getfirebug.com/releases/firebug/1.8/
visit this and find the compatible version of this f***ing firebug. which certainly has nothing to do with us (not-programmers). i have been having this problem for months but now the last link worked for my firefox 6. Find yours here.

Problems with the iOS 5.1 version, HELP!

I just upgraded to the latest version - iOS 5.1 on my iPhone 4, but now the screen is freezing all the time, and the phone shuts down. Is this a problem with the new 5.1 version? What can I do to fix it?

Try to restore it... I'm hating this iOS 5.1, everything was working much better before it was released. I shouldn't have upgraded...

TS3938 I have a problem with the CD player plays some species, others give me this letter no longer supported PowerPC

I have a problem with the CD player plays some species, others give me this letter no longer supported PowerPC

Educational software suffers from having been written many years ago, but the financial market is not such to give the publisher much incentive to update the software.
The problem for you is that Top Notch 2 with ActiveBook was written and released by Pearson back when Macs utilized the PowerPC CPU platform. In 2006, Apple migrated the Macs to Intel CPUs, but released their Operating Systems with an invisible translation program, Rosetta, so that the user could continue to use their existing library of PowerPC applications and take time to update them as needed.
The problem arises in that Apple no longer continues to update Rosetta for inclusion in Lion and now Mountain Lion, so that your CD-ROM cannot be executed on your Lion Mac.
Since Pearson looks unlikely to rewrite and release an Intel version of Top Notch 2, you must find a workaround that will play your CD-ROM and allow you to continue utilizing your ActiveBook.
You do not indicate which model of Mac you are using. If you upgraded it to Lion from Snow Leopard, you have these workarounds:
1. Revert to Snow Leopard
2. Partition your hard drive or add an external hard drive and install Snow Leopard into it. This will allow you to "dual-boot" into Snow Leopard when you need access to run Top Notch 2. You would then have to "dual-boot" back into Lion when you needed access to those features required by Lion.
If you purchased a new Mac that came with Lion, you only have one workaround available to run Top Notch 2:
3. Install Snow Leopard (with Rosetta) into Parallels
[click on image to enlarge]
There is an easier way to run your Top Notch 2 in Parallels if cost is not a significant factor for you. You must purchase Snow Leopard Server from a third party souce, such as eBay, which when sold by Apple was $499 or more. I now see that it can be purchased on eBay for as little as $51. Parallels allows for easy installation of Snow Leopard Server into Parallels.
If cost is a factor, then use the link above the photo to follow my instructions on how to install Snow Leopard client ($19.99 from Apple) into Parallels and achieve the same result.
Lastly, you could purchase a used Mac that will allow Snow Leopard to be the boot OS X installed (wth the optional Rosetta installed). But this seems like an expensive alternative just to run one piece of software; and subject to hardware failure without notice or recourse.

Problem with the crystal reports XI

Portuguese
Boa Tarde, tenho um problema com o cristal reports XI.
ele esta em producao fazendo a consulta em um servidor mas quando eu acesso passando parametro connectionInfo.ServerName = <endereco do servidor> para um servidor de teste pelo VStudio 2005, ele nao busca os dados deste e continua acessando o servidor de producao.
gostaria de saber como consertar isso
English
Good afternoon, I have a problem with the crystal reports XI. him this in production making the consultation in a servant but when I access passing parameter connectionInfo.ServerName = I address of the servant > for a test servant for VStudio 2005, he doesn't look for the data of this and it continues accessing the production servant.

Fabiano, here is what I understand of the issue:
1) You are using CR XI (I am not sure if release 1 or release 2)
2) you are using .NET 2005
3) you are trying to change the server name, but the report keeps giving you data from the original server
Please answer the following:
1) Are you using CR XI release 1 or release 2?
2) Can you change to the new server, using the Crystal Reports Designer?
3) Can you duplicate the issue on your development computer?
4) What Crystal Reports service pack are you on?
5) Are you connecting to the database using OLE DB?
Ludek

Problem with the "now playing"-function after timer sleep-mode

At first: sorry for my english.
I have the following problem with the Nano 6G: I set the timer of my iPod Nano to shut it down after a while of playing. When I turn it back on afterwards, the now-playing-button does not show the song that it played at last. Instead of that the nano is automatically set to shuffle mode which was not activated before and the now-playing-button will show any other song randomly.
This does not happen when I switch it to sleep-mode with the button on the top, only when the sleepmode ist activated by the timer.
Does anyone notice the same issue with his nano? How can I bring my nano to play the same song after the sleepmode, that it played before?

Hey Ipaqman, that strange behavior of the Nano 6G annoys me for exactly the same reason: audiobook in bed + sleeptimer = losing the place. As You say, the 5G works better with that and I also hope that Apple takes notice of that issue and will solve it.
Until that I got myself a "workaround". I create a new playlist on the device, with just the single audiobook in it, that is actually in use. This helps me finding back into it, as long as "now playing" will not work correctly with the sleeptimer.

The problem with the warranty repair in Russia. I bought an Iphone without a contract in Paris, and now I must go there to have it repaired? In Russia, the repair takes only bought in Russia. Is this correct?

The problem with the warranty repair in Russia. I bought Iphone4 without a contract in Paris, and now I must go there to have it repaired? In Russia, the repair takes only bought in Russia. Is this correct? So I was told over the phone in service and support in the near future, I was not planning to fly to Paris. Just for the sake of repairing the phone to fly to Paris is expensive.
The problem of 100% on your phone, as trying to change SIM cards of different operator and the problem remains.
Phone is constantly losing the signal during a call, and often just disabled.
I bought 5 phones for himself, his wife and friends, and only I have these problems.
Very annoying.

Yes you will need to go back to France as the warranty is country specific except in EU countries. Or if you know anyone there they could take it to an Apple store if you posted it to them.

Problems with the sap* password

Hi,
i have a problem with the sap* password.
I tried my masterpassword but it did not work.
So i tired the following from the Tread: Password problem with user DDIC
resetting password for sap*
sqlplus "/as sysdba"
sql> update sapsr3.usr02 set bname='SAP1' where bname='SAP' and MANDT=000;
sql> commit;
Bud it did not work. After i tried to delete the sap*1 from the table sapsr3.usr02 but it did not work.
sql>delete from sapsr3.usr02 where mandt='000' and bname = 'SAP*1';
I also restarted the instance after the commands. But i can not logon with 'sap*' and the password 'pass' .
Mybe someone can help me?
Regards
Mike

Starting with release 7.00 based system you have to set
login/no_automatic_user_sapstart=0
in your instance profile and restart the instance.
Markus

Problems with the display resolution on Android

We have a problem with the display resolution on our Google Nexus 7 (2013) and our Multi-Folio-App. If we watch an article inside our published Multi-Folio-App, the article does not use the full screen of the tablet. But when I look the article inside the content viewer, it use the full screen of the tablet. For your information: We use the resolution of 1280 x 800 and the tablet has the highest resolution of 1920 x 1200.
However, under iOS it works without problems. We use the iPad 4 (2048 x 1536) with the article resolution of 1024 x 720. Do you have any idea what we can do? Under this post, you can find two screenshots which discribe the problem.

Scaling was introduced in v28:
from http://helpx.adobe.com/digital-publishing-suite/help/whats-new-release.html#what_s_new_in_ this_release
Content on Android devices scaled up
In previous releases, smaller renditions in Android apps were not scaled up, causing both letterboxing and pillarboxing. With v28 AIR-based Android apps, smaller renditions are now scaled up proportionally.

Problems with the Losing Release Strategies Approvals in PO.

Similar Messages

Maybe you are looking for