Problems with the mouse timing (CS 5)

The mouse timing is completely off on my project. I am used to using CS 4 where the mouse timing was simply spread evenly throughout the length of the mouse bar i.e. the movement didn't automatically jump towards the end of it's alotted timeetc. In CS 5, however, the mouse doesn't even end up where I assign it to go. It also doesn't start to move until halfway intio the mouse bar and then it starts moving slow and eventually doesn't even reach it's assinged destination! I've checked that the "Reduce Speed before Click" setting is indeed off. I am familiar with Captivate, this doesn't seem to be working the way it should. Is there an update? Could it be a problem that I am working on a project originally created in CS 4. Please help.

Hi there,
I created a Captivate 4 recording project with mouse movements and upgraded it to Captivate 5 and published the project, for me the mouse trial is proper and clicks in the intended areas in the application. I dont see the delay as well.
Can you let me know
1. If i have missed any steps above ?
2. If you have resized the project in Cp4 and then upgraded in Cp5 ?
If possible please share the Cp4 project so that i can have a look into the issue in more detail. You can mail me the project to ashwin at adobe dot com
Cheers !!
Ashwin Bharghav B

Similar Messages

  • The cursor on my iMac freezes, and I cannot do anything unless I unplug the computer. It is NOT a problem with the mouse or the keyboard ... it is internal. How do I fix this??

    The cursor on my iMac (Panther 10.3.9) freezes to where I cannot do anything unless I unplug the computer. It is NOT a problem with the mouse or the keyboard. How do I solve this problem?

    ClassicII wrote:
    Sorry to say but your imac g5 logic board has bad caps. This was a problem apple had and issued a out of warentee fix but that has now expired.
    The cost to get this repaired is more than what you could find another used imac for.
    I would suggest you get some details before you rush to make a diagnosis. You have absolutely no information to base this on. I see you're hitting up on numerous threads all over the place. Quality, meaning several good posts with reliable advice, is much more worthwhile than quantity.

  • Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the  photo editing section,and no other application. My mouse drivers a

    Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the  photo editing section,and no other application. My mouse drivers are up to date.Any help or advice would be most welcome.

    Good day!
    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements
    and please read this (in particular the section titled "Supply pertinent information for quicker answers"):
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    Regards,
    Pfaffenbichler

  • HT5625 problems with the mouse pad

    does anyone have problems with the mouse pad? it doesnt work 70% of the time, have to add a mouse thru the usb

    HI and Welcome to Apple Discussions ...
    *"The mouse button no longer really clicks." " the computer seems to think I'm clicking the mouse."*
    You are using an external mouse with your MacBook???
    Carolyn

  • Problems with the mouse pad

    For no reason the mouse button un my MacBook Pro got very noisy and you can feel that it works a bit harder. There was no dirt ore liquid getting in my Laptop. Did someone else has experiense this problem.

    I'm figuring it might be related to me not having the battery on it for a while yesterday. on monday i'm taking it into the local retailer and having the guy open it up and clean it out. I have a feeling there is something between the mouse button and the metal piece under it, but it's just a hunch, because the problem only started after me having the battery pack off for a fair bit. We tried spraying compressed air underneath and it did nothing.

  • Problem with the mouse key

    Hello,
    I can't speak english very well. but I try it
    My problem is that my trackpad mouse key sometimes doesn't work completly.
    what can I do?
    thanks

    First, you have to try and determine if it's software or hardware related. It sounds though, like you may have a trackpad issue.
    1. Try using a mouse plugged into the unit. Does it do it then?
    2. Login as another User. Does it do it then?
    3. Boot from your install DVD and play with it there. Can you get it to act up now?
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    ITMS: MacOSG Podcast
     An Apple User Group 

  • My firefox browser is randomly scrolling. I have no idea why. Could it be a problem with the mouse?

    Goes up and down sometimes with out me touching keyboard or mouse, mostly down. Would be grateful for any advice.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Problems with the items (control) in forms 9i (Re)

    Hello,
    I write this problem in a other post and but don't have any feedback about it(So I will give another try:-) )
    The problem that I will describe don't happen all the time and is very rare but I want to know if it's a normal bug of forms or something more special of our PL/SQL code...
    So here we are.
    Is there others developpers here that have problems with the mouse cursor of the user that seems to be "jammed"(blocked, trapped) in a text item (or another control, like a list item). When this problems happen, the user can't go on another field of the forms with his mouse cursor(Mouse click), the only thing that can resolve that is to refresh the page with Internet Explorer, and after that, he is free to go on another field of the forms.
    This problem is very rare but happens sometimes.
    Thanx in advance!

    Hi,
    This problem is due to failuer of navigation of mouse cursore. For more specific solution can you give the error message and error code, So that we can have exact picture. Waiting for error code......

  • Problems with pro mouse

    Finally got a Pro Mouse for my G4 (still non-mac keyboard though). But it seems that there is a problem with the mouse now. I got it second hand from a friend and saw it working on his computer, but I plug it in to mine and I get no response! I've tried plugging it into different ports and restarting the computer with no luck...any suggestions?

    Thanks Barry,
    I just tried to do what you said in your answer and after restarting the computer everything worked fine for a short period of time, after that everything was as before.
    I took the magic mouse to an apple store a couple of days ago, they tried it in several computers and everything was fine. I also checked my macbook's bluetooth with other devices and I didn't find any problems.
    I still have until monday to fix the issue before the 14 day trial period expires, so you are welcome if you have any more suggestions.
    Thanks again to everybody trying to help
    Miguel

  • HT3226 Having problems with my mouse. Cannot scroll up or down or sideways. Did all the cleaning but still not working. Any help on this??

    Having problems with my mouse. Cannot scroll up or down or sideways. Did all the cleaning but still not working. Any help on this??

    Hello:
    Try resetting the PRAM and SMC.
    Barry

  • TA48312 Hello I have a Mac Mini with OS 10.7.5 And I have a problem that the mouse does not do a right mouse ... I have the mouse model a1197 What should I do? Thank you

    Hello I have a Mac Mini with OS 10.7.5 And I have a problem that the mouse does not do a right mouse ... I have the mouse model a1197 What should I do? Thank you

    Why is there no iDVD on my new Mac? How do I get it and how do I install it?
    https://discussions.apple.com/docs/DOC-3673

  • Problems with the (WINDOWS 8 pro -64 BIT) IN THINKPAD L520 - 5016 RL2

     I have some problems with the (WINDOWS 8 pro -64 BIT) is not working properly IN THINKPAD L520 - 5016 RL2.
    1. Message appears telling me that the drivers of the display  has been restored crash.
    2. The mouse pointer moves very slowly sometimes, and sometimes does not move for a while.
    3. Device software such as lenovo-airbag protection , lenovo-internet connection and lenovo web connection........ its  is not compatible with the system, and do not work.
    What is the solution؟

    Hi, MUJAHED
    I have a few questions for clarification I would like to ask about your first two issues:
    1) Can you copy the contents of this message and respond back with them. Any error codes or direct quotation from the system can really help in diagnosing a problem.
    2) Does this only apply to the TrackPad, or does this behavior also occur with an external mouse? It may help to download the latest mouse drivers for your system, which can be found here.
    As for your last issue with the Lenovo service not being compatible with the system: Unfortunately, software for these applications has not been released for Windows 8. Windows has its own network settings that you can use to connect to the Internet and networks, so that is still possible, though you may not enjoy it as much as Lenovo's program.
    Best,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse.    The clip follows my mouse movements and goes to other places in my

    Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
    When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
    The clip follows my mouse movements and goes to other places in my time line.
    I try to delete these extra insertions, but the mouse will not release the clip.
    Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
    This issue has consumed too much of my time and does not go away.  It ruins my video.
    Help please.
    Thanks

    I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
    Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
    So thanks! Problem solved!

  • All of a sudden my diplay appears to be larger than the screen. The display scrolls with the mouse. How to correct?

    My screen scrolls with the mouse to show the entire display. Looks like the display is larger than the monitor. Have no idea what teh cause ws but have been unable to correct. Any suggestions?

    Went to universal access, turned off zoom and it corrected the problem.
    Thank you.

  • I can't drag files with the mouse

    Just installed Mountain Lion. After about four days I can't drag files with the mouse. Not across the desktop or from Finder window to Finder window.

    I have the same problem, I have posted the below here: https://discussions.apple.com/thread/4152036?start=0&tstart=0
    I have exactly the same problem on Mountain Lion- I go to drag files from the finder to another finder folder or the desktop and when I go to release the mouse button the file stays in a "hover" state, as if I hadn't released the mouse. It then follows my mouse cursor around forever. Very frustrating.
    I have rebooted several times - any ideas?

Maybe you are looking for