Problems with the new iPad and Joikuspot premium after iOS 6

Hi,
I'm experiencing serious problems with my new iPad after last iOS update. Usually I was connecting to the internet through Joikuspot premium on Nokia mobile phone (E6). I was able to do everything, https sites surfing, absolutely everything with no exceptions.
Now, after iOS 6 update, I can't connect to https sites, google+, sync calendar etc.
I've tried to change connection criteria on joikuspot but nothing. The fact is also that other devices as laptop or other smartphones are still working perfectly, in any case, sharing the wi-fi connection created by joikuspot.
Finally the problem is 100% due to the iPad and the new iOS.
disappointing, amateur for such a device... (iPad I mean).
Any help?
Many many thanks
Vittorio

Ho lo stesso problema, dopo l'aggiornamento a IOS 6 l'ipad non riconosce più il mio nokia N8. Con IOS 5 andava una cannonata...
vorrei ritornare a IOS 5

Similar Messages

  • Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

    I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
    I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged. 
    I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
    The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
    If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • Is anyone having problems with the new ipad staying connected to wi fi

    My new Ipad 4G + WI FI keeps losing the connection to the internet.  I have to continuously type in the password  to our WI FI.  Is anyone else having this problem?  I didn't have it with the Ipad 2.

    Search before posting please:
    https://discussions.apple.com/thread/3812929?tstart=0

  • Problems with the new MacBookPro and Final Cut???

    Got this from a friend of mine, and wondered if y'all could provide any insights.
    Thanks in advance.
    Hal
    Begin forwarded message:
    " ...the water walkers are
    discussing the "Steve Givith - Steve Taketh" concerning the new powerbooks.
    Along with the hardware downsides: no Firewire 800; only one USB port; the Superdrive has reduced features from the existing one in the IBM processor version; and no internal modem.
    On the software side - and the reason for this note, the new "Mac Book" cannot run software that is keyed to the CPU of earlier Mac models. That means that where Apple or the vendor keyed the ability of an application
    to run to the G3 or G4 or ALTIVEC engine, that program will no longer
    operate in the new Mac Book. (This true?)
    Bringing that closer to home:
    The current version of Final Cut Studio is not supported on Intel-based
    Mac computers with Rosetta. A Universal version of Final Cut Studio,
    which will run natively on both PowerPC- and Intel-based Mac computers,
    will be available before the end of March 2006. (Will that be backward compatible with the pre Intel Macs?)
    Final Cut Express is Not supported on Intel-based Mac computers with
    Rosetta.
    ==> notice that the "universal version" sentence is not found on the
    Apple website under Final Cut Express.
    Any clues or contacts who can sort this out?"

    From the keynote:
    Universal Binary versions of the Pro software (Final Cut Pro, etc) will be available by the end of March 2006. It will cost $49 for current owners of the most-recent version of Final Cut Studio to get this Universal version.
    Look at this page as well:
    http://www.apple.com/finalcutstudio/topquestions.html
    "Does Final Cut Studio run on the new Intel-based Mac computers?
    The current version of Final Cut Studio is not supported on Intel-based Mac computers with Rosetta. A Universal version of Final Cut Studio, which will run natively on both PowerPC- and Intel-based Mac computers, will be available before the end of March 2006.
    If I buy Final Cut Studio today, can I get the Universal version when it’s available?
    Yes. All owners of Final Cut Studio can purchase the Universal version for $49."
    Re: Final Cut Express... this page confirms what you said about it not being supported on the Intel Macs using Rosetta:
    http://www.apple.com/finalcutexpress/specs.html

  • Synching problems with the new itunes and iphone and outlook

    I downloaded the new version of itunes and now my outlook conatcts are not synching with my iphone 4S. I have added some new contacts and they do not appear.

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • I am having problems with my new ipad that i got for Christmas today, i don't get free wi-fi at my home and it said if the wi-fi is not available, connect to itunes. i have done that and it didnt help me. mind helping me out?

    i am having problems with my new ipad that i got for Christmas today, i don't get free wi-fi at my home and it said if the wi-fi is not available, connect to itunes. i have done that and it didnt help me. mind helping me out?

    Further info - I changed my security settings to allow apps from anywhere, and again tried to install.  I again got an error message
    that the update failed to install, and to contact Customer Support.

  • I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

  • I am having email problems with the new Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help

    I am having email problems with the new Mountain Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help
    Incoming Mail (IMAP) Server - requires SSL:
    imap.gmail.com
    Use SSL: Yes
    Port: 993
    Outgoing Mail (SMTP) Server - requires TLS:
    smtp.gmail.com (use authentication)
    Use Authentication: Yes
    Use STARTTLS: Yes (some clients call this SSL)
    Port: 465 or 587
    Account Name:
    your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
    Email Address:
    your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
    Password:
    your Gmail password
    The Quick Answer
    Follow the instructions below to set up IMAP1 access in most email clients.
    Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
    this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option?  The next page under ADVANCED: THERE IS A BOX SSL MARKED.  Then IMAP Path Prefix - I put stmp.gmail.com.. is that right?  Port 993 can  use this one? as 456 doesn't work and 587 said it wasn't safe.  Under AUTHENTICATION I used PASSWORD.  Should I have used external client cert TLS?
    Please help me set this up securely. Thanks

    Apple - Support - Mail Setup Assistant

  • Since the most recent Firefox update 3.6.8 by banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you g

    Since the most recent Firefox update 3.6.8 my banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you give me some idea why it is doing this?
    == This happened ==
    Every time Firefox opened
    == Right after the new Firefox update

    Hello Anne.
    Can you please try it in a new (temporary) Firefox profile and see if the issue is still present? See [http://support.mozilla.com/en-US/kb/Managing+profiles this article] to know how to create a new Firefox profile. Please report back the results.

  • Can I use the Speakers AirPlay Philips DS3880W with the new iPod and the new iPad?

    First, I´m Spanish so I can be bad writing in English!!
    I want to buy the Speaker AirPlay Philips DS3880W and I have got the new iPad and the new iPod, in the compatibility, in the information of the speaker, I can´t see them. Why? Althrought the software is the same, Can I use the speaker with them?
    Here is the link: http://store.apple.com/es/product/H6906ZM/A/philips-ds3880w-airplay-speaker?fnod e=77&fs=s%3DpriceLH&p=1

    I say yes. this page says:
    See all FAQs
    Does the product support iPad2 and the New iPad?
    Yes. The product supports iPad2 and the New iPad.
    http://www.p4c.philips.com/cgi-bin/cpindex.pl?ctn=DS3880W%2F10&dct=FAQ&faqview=1 &new_tmpl=1&refdisplay=C36_IPAD2_NEWIPAD_FULLSUPPORT&refnr=0085930&scy=HU&slg=AE N

  • Apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

    apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

    No. Apple replaced the disk drive with a solid state drive (SSD) instead. The SSD is faster the old disk drive.
    Allan

  • HT4623 Is anyone else having problems with the new up date?  it's messed up all my passcode and everything

    Is anyone having problems with the new update?? it has messed up my mail I can't send and all my passwords are messed up

    Is anyone having problems with the new update?? it has messed up my mail I can't send and all my passwords are messed up

  • Doubts with the renditions for the new ipad and ipad 1 and 2.

    Hi,
    I will start doing a layout for a publication with two renditions (for Ipad1 and 2, and for the new ipad).
    I have read the document
    "Best practices for using Adobe DPS to publish to the new iphone"
    http://blogs.adobe.com/digitalpublishing/files/2012/03/DPS_iPad3_bestp ractice.pdf
    It recommended creating an Indesign document of 1024x768 pixels and working with images in high and low resolution in different layers to then pass them to Folio builder for  renditions of 2048 with high ones and 1024 with the low ones.
    I just worry about making two versions of the named "pass-through overlays"? (video, image sequence, panorama and pan / zoom).
    And what about the slideshows? This content is resampled although you use the PDF image format.
    If I'm working on a document of 1024x768, and the states of object include text, will be pixelated when fit to the 2048 size in the rendition?
    I would greatly appreciate a response as soon as possible. I do not have one of the new iPads and am afraid I will not be able to see the result.
    Thank you.

    What is your worry about making two versions of the pass-through overlays? As long as you put each version (SD and HD) on a separate layer, and then turn the layer off/on appropriately when adding the InDesign document to the appropriate SD or HD folio you'll be fine.
    Similarly, with the resampled overlays, you can if you choose make two versions of the overlay on separate layers, one for SD and one for HD, to ensure the resolution image you want is used for each version. In practice you only really have to do this if you have text in the image somewhere. For straight image content without text you can, generally speaking, put the high-res asset in and let InDesign resample it down to SD for you when adding the InDesign file to the SD folio.
    Neil

  • TS1398 I have 2 ipads 1st  ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...?????  And i had checked with my rout

    I have 2 ipads 1st  ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...?????  And I had checked with my iball baton router with the iball sevice provider.

    Hi there Paula120,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • What is the difference between the new ipad and ipad with retina display?

    what is the difference between the new ipad and ipad with retina display???

    This compares the two new iPads with the previous Retina iPad:
    http://www.engadget.com/2012/10/23/ipad-mini-vs-2012-ipad-whats-different/
    Regards.

Maybe you are looking for

  • XML sql query not displayed using SQLPLUS

    Have a registered schema and 1 xml document successfully inserted using Oracle 10.2.0.3.0 I then run the following query: select extract(object_value,'/warehouse/warehousename')from xwarehouses; Expecting 1 record to be returned in SQLPLUS but get th

  • How to pass data from offline form to webdynpro java

    Hi, Please suggest me how to pass data from offline from to webdynpro java node? i am using the below code to pass data from offline form(after entering values in the form) to node . i am using form upload ui element to upload offline form and after

  • Dashboard to Report interaction

    <p>Hi everyone,</p><p> </p><p>Here is my question:</p><p> </p><p>I have a dashboard with a dropdown list and a link to a report,is it possible to change an logo picture from a report with thecriteria i choose in the dropdown list? for example if in t

  • Bridge Message app and Torch (AT&T) continuous startup loop.

    So this bug has been with me from receipt of the tablet. First versions: PB is 1.0.3.1868, Torch is AT&T bundle 2342, Bridge is 1.0.0.83. Has anyone experienced the following transitional Messages behavior?  You successfully make the Bridge connectio

  • When converting RAW to Jpegs in Batch converstion, I'm getting 2 copies of everyone.  Why??

    When converting RAW to Jpegs in Batch converstion, I'm getting 2 copies of everything.  Why??