Problems with the OWB Runtime Audit Browser

I executed some mappings in my project…
I go to the Client Browser Version of the OWB Runtime Audit Browser (before I Started OWB OC4J Instance).
I specified the Runtime Repository connection information and click in View
Deployment Report or View Execution Report, but, when I access to the Runtime Repository I don’t see any data in the web page.
I probed with differents filters but I didn’t see data!!!
What is the problem?

Hi Mark,
Yes, I am sorry, I wanted to say 'I do not see any data'…, but when I connect (using the access user credentials and the QA User role or any other role), and click 'view execution report' I do not see any data!!!! I don’t have any data in the table (Only the name of the repository), I drill down to the details of the execution but I do not see any data!!!
In the Filter Options section are the mappings in a combobox (Execution Filter) but I do not see any data about its!!!
Besides, for example If I execute the query in SQL PLUS: select * from ALL_RT_AUDIT_MAP_RUN_ERRORS.
It has 581 rows…
What happens?
Why I don’t see any data?
Thanks!

Similar Messages

  • OWB Runtime Audit Browser has no respond

    Hi All,
    After I started the "Start OWB OC4J Instance" and at the console, it shown:
    Oracle9iAS(9.0.2.0.0) Containers for J2EE initialized.
    Then I start the "OWB Runtime Audit Browser", and saw the Warehouse builder browser , Runtime Repository Report Web page prompt up. It then don't show any respond, whatever I input to the login information and click view report buttons. Does anything that I must set in order to make it work? and how could I turn the verbose of OC4J Apps on, to view more debug message?
    background information : I already could run mapping and process flow at my enviornment.
    Thx for your kindly help.
    Rds,
    CH

    Provide the following information in the Design Client login page:
    HTTP Server Host PORT (default 7778, use 80 for older version of Oracle HTTP)
    DAD (Name of the OWB Repository you want to browse. The repository should be set up properly. The web page will then be redirected accordingly. You will need to provide the OWB Repository name and password (this is NOT your OWB login user name and password).

  • OWB Runtime Audit Browser

    Hi,
    I am not not able to open the Runtime Audit Browser.
    Before doing the above steps ,i configured the Internet Explorer Browser as per the installation Configuration Guide documentation.I did the following settings.
    I. To add "localhost" to your Internet Explorer proxy server bypass list:
         1. From the Tools menu, select Internet Options.
         2. In the Connections tab, click LAN Settings.
         3. Check the Bypass proxy server for local addresses option.
         4. Click OK.
    II. Configure the Cache Management in Your Web Browser
    We must set the cache management on your Web browser for any client you use to
    access the Design and Runtime Audit Browsers.
    To configure the cache management in Internet Explorer:
    1. From the Tools menu, select Internet Options.
    2. In the General tab, in the Temporary Internet files section, click Settings.
    3. For the Check for newer versions of stored pages option, select Every visit to
    the page.
    4. Click OK.
    3. Configured Warehouse Builder with a Net Service Name
    I did start the Runtime OC4Z instance before opening the Runtime Audit Browser.It is opening the empty page.
    I am getting the following error in OC4Z instance:
    Error starting the HTTP-server:network subsystem failed:JVM_Bind.
    Thanks for your help.
    Vinay

    If you are running everything locally, you should have to start the OC4J instance from the OWB menu and run the RAB from the same menu. In the RAB login page you should enter the runtime repository user name and password, the machine name where you are running the DB, the DB port number and the db instance name. It should work without problems.
    What version are you using and what is your configuration (do you run everything on your PC?).
    Regards:
    Igor

  • Problems with the par file of Browse Deployment

    Hi,
    I had an error message with the com.sap.portal.support.browse.default in Browse deployment, that this iView is not found.
    Fortunately I had a file with the same name, so I uploaded it, but it was the wrong one (Why do they all have the same file name?). I uploaded the par file of the masthead, so every time i click on the browse deployment link I get the masthead and now I have no chance to download other par files.
    Do I still have the right iView on the Server or in the Portal? If yes, where? Or can anybody send me the right par file?
    e-Mail: Ulli_Arndt(at)gmx.de
    Thanks in advance!
    greetings,
    Ulrike

    Hello Ulrike,
    Most companies use different servers for development and Production. The Browse Deployment Option should be used only with the development server. If you're going to use it with the Production server, there could be problems, as the two servers have a different architecture.
    Once you sign in to the DEVELOPMENT SERVER using your user id, ensure that you have the Systems Administration Role and click on the tab corresponding to the same.
    Then select Support.
    Select Portal Runtime.
    Select Browse Deployment.
    Once you do this, you'll see a filepath on top of the page just below the top level navigation area. Here's where most people commonly make a mistake.
    Ensure that the breadcrumb is EXACTLy as follows:
    ROOT/WEB-INF/deployment/temp
    If this is not the case, clcik on ROOT in the filepath displayed on your screen and navigate along the filepath above so you reach the correct iView.
    You should now see a list of files with the extension .par.bak.
    Upon downloading any of these files, the downloaded .rar file for most of the files with have the same filename. Once you unzip this file once or twice, you'll get a .par.bak file with the same filename as the one you downloaded. Rename the extracted .par.bak file by removing the .bak extension. You'll be left with a .par extension now.
    You can now import this file in NWDS and work on it as required.
    I hope this helps. Let me know if you have anyfurther questions. Screenshots are alsways helpful, especially of the filepath on the top of your screen.
    Regards,
    Farsheed

  • Problems with the ADF runtime installer 10.1.3.3 on OAS 10.1.3

    hi, all,
    I have successfully installed an oracle application server on a linux machine and in order for ADF BC application to run on it i have to install the adf runtime libraries.
    What i did is the following:
    -I shut down the opmn of the server
    -I installed the libraries using the jdev utility
    -when i try to start the server again the OC4J process does not start and gives the following error.
    07/11/22 11:44:09 Start process
    07/11/22 11:44:15 Error initializing server: Shared library "apache.commons.logging" could not be found.
    07/11/22 11:44:15 Fatal error: server exiting
    Any help on this issue? I am not about to install the ADF runtime through the JDeveloper as the OAS is on a linux machine and I am developing on a PC.
    Regards,
    Thomas.

    Run Time Libraries Cause problem on oracle application server

  • Problem with the clientinstallation runtime and merge module

    I'm using CR XI SP4 and as a data source I use a XML file that was defined
    with a XSD.
    From my application I generate a XML file and start CR through a Delphi
    component.
    As a parameter I supply a RPT file without data.
    That's all working.
    Now I want to start my application on a client. Therefore I have created a
    MSI file from the 4 Merge files of SP4 and run the installation on the
    client.
    Used merging modules of SP4 :
    1.      CrystalReports11_5_RDC_Designtime.msm
    2.      CrystalReports11_5_RDC_License.msm
    3.      CrystalReports11_5_RDC_Reportengine.msm
    4.      CrystalReports11_5_RDC_Runtime.msm
    Then the program crashes with a Windows error.
    If I save the Data in the report it works. The data ist not up to date then.
    If I install a complete CR XI it works, even when there is no data in the
    report.
    The data ist diplayed correctly.
    What am I doing wrong?
    What do I have to install on the client to make it work?
    Thanks in advance for your quick help.
    Greetings Martin Weißenborn

    Hello Martin,
    Please post this query to the [.NET Development - Crystal Reports|SAP Crystal Reports, version for Visual Studio;  forum:
    That forum is monitored by qualified technicians and you will get a faster response there.
    Also, all Crystal Reports .NET Development queries remain in one place and thus can be easily searched in one place.
    Thanks a lot,
    Falk

  • Error (access denied) when starting Client Runtime Audit Browser

    LS,
    After starting the OC4J instance, I try to start the Client Runtime Audit Browser. For a brief moment I see a DOS-box, then an IE-page appears saying the following:
    ======================================================
    ERROR
    The requested URL could not be retrieved
    While trying to retrieve the URL: http://127.0.0.1:8999/owbb/RABLogin.uix
    The following error was encountered:
    Access Denied.
    Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.
    ======================================================
    Any idea whether this is a local problem?
    I've tried applying the settings as mentioned in the configuration guide, but the Bypass option for the proxy is impossible to set since we do not use a proxy server.
    Your thoughts?
    Regards, Patrick

    Good morning All,
    Maybe I've got the wrong idea of what is all needed to be able to run the RAB locally, but I thought that starting the OC4J instance would be sufficient to get started.
    In the Installation and Configuration Guide the following is mentioned:
    2.7 Step 6. Configure the Web Browser for Design and Runtime Audit Browsers
    2.7.1 Add "LOCALHOST" to Your Web Browser Proxy Server Bypass List
    2.7.2 Configure the Cache Management in Your Web Browser
    2.7.3 Configure Warehouse Builder with a Net Service Name
    As said before:
    @2.7.1, we do not use a proxy (according to Internet Explorer settings) therefore I can't add 'localhost' to the bypass-list, but then again I think that it does not need to be, since there is nothing to be bypassed in the first place.
    2.7.2 has been implemented.
    @2.7.3, I added the net service name manually to TNSNAMES.ORA (since I also needed that to be able to get on to the database using TOAD and SQL*Plus).
    We do not have 9iAS integration for RAB, nor do we have OEM integration.
    Are there other things that need to be implemented? Mentioned so far have been HTTP-server and RTP services, but paragraph 2.7 does not mention anything about this. Maybe there are certain services that need to be running on the server (like HTTP and/or RTP), even though I would like to run the RAB locally?
    Where does one actually need RTP for?
    Thanks in advance.
    Cheers, Patrick

  • Runtime audit browser shows the status busy for the cancelled OWB jobs

    Hi ,
    I canceled long running OWB job.But the runtime audit browser was showing the status as BUSY.
    I observed the the oracle session (SID:48) was running and killed the session.
    After killing the session,the status in runtime audit browser changed to COMPLETED.
    Till that time i was with an impression that "if we cancel a OWB job then it will kill all the sessions/process that initiated".
    Could please tell me why this is happening?
    Anything wrong with my configuration?
    Appreciate early response.
    Thanks,
    Naidu

    Hi Naidu
    Yes you are absolutely right. When you press the cancel button in the GUI, the runtime repository does not get the signal that he is been asked to stop and abort. The GUI cancels himself but the background oracle process is still on !!!. The only way to do is to kill the oracle session. Another way I tried to tackle is
    go to the directiry OWB/10.1/owb/rtp/sql and run the file @list_request.sql in sqlplus. Note that you have to login as runtime repositiry owner. After you get the audit id, run the file abort_exec_request.sql and supply the audit id that you obtained by running list_requests.sql. Sometimes it does not work also . Hence the best method is to kill the process

  • Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

    I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
    I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged. 
    I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
    The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
    If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should lo

    I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should look and B is what happens after I have I opened several tabs. I can get it back to normal if I click on VIEW than click on customize. When the customize window appears FireFox returns to its normal state. I than click on the done box and go back to what I have been doing. I tried resetting FireFox back to default settings, but that did not correct the problem.
    This began happening about a month ago. Is there a way I can fix this problem? Thanks for your help.I don't know how to attach my 2 attachments that shows the problem I am having.
    [email address removed to protect your privacy and security]
    <! [email protected] -->

    I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598

  • Since the most recent Firefox update 3.6.8 by banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you g

    Since the most recent Firefox update 3.6.8 my banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you give me some idea why it is doing this?
    == This happened ==
    Every time Firefox opened
    == Right after the new Firefox update

    Hello Anne.
    Can you please try it in a new (temporary) Firefox profile and see if the issue is still present? See [http://support.mozilla.com/en-US/kb/Managing+profiles this article] to know how to create a new Firefox profile. Please report back the results.

  • Numerous problems with the Adobe AIR runtime for Android

    I created a app on the platform Adobe AIR for Android, which requires for AIR. The app is very popular in the Android Market, but many users complain of problems with the installation of Adobe Air runtime.
    For example these phones users: LGE LG-P698, LG Pecan, HTC Wildfire. But judging by the fact that users have access to the installation of Air, their phones are compatible with it.
    Tell me how do I solve the problem?
    In addition, I have a few questions:
    1. Decides whether the problem of export application with embedded AIR runtime?
    2. I build my apps with the help of ADT. How in this case to make embeding AIR runtime?
    3. Is it possible to prompt the user to download and install older versions of AIR? Where to find its?
    I hope to help, because the problem is global.

    Hi Astraport,
    I think you should embed the air runtime in your application,
    Some time ago I've written a step by step guide, have a look at this post:
    http://forums.adobe.com/message/3961579#3961579
    I hope it helps

  • Problems with the browser

    Hello,
    I make an aplication where I manage projects, accesing a apex as developer and run my application and it works well.
    Then I access to the application as final user and when I modify any data, the aplication does not save the values changed.
    What Can I do?

    What Can I do?
    1. Please tell us your first name and include it in your handle and/or profile to help us.
    2. Tell us why the subject of this post is "Problems with the browser".
    3. Check your authorization schemes, maybe they enable/disable certain functionality based on who is logged in. But if you developed the app you should already know this, so that's just a wild guess.
    4. Show a detailed example, preferably by putting the application on apex.oracle.com to show one of the pages that doesn't do what you want.
    Scott

  • Problem with the browse sequence back and browse sequence next widget placed in the screen layout

    Hi,
    Some basics: We are using Robohelp 10 to  generate multiscreen  html5 output. We used the pharmaceutical  screen layout downloaded from:  http://helpx.adobe.com/robohelp/robohelp-screen-profiles-layouts.html but modified it to match our GUI.
    We are having a problem with the browse sequence back and browse sequence next buttons placed in the screen layout from the widgets tool bar. We are in no way experts at this part of Robohelp...and the css portion of all this is a bit of mystery but we have managed to get mostly what we need. Now we just need these buttons to work. In the past we used Airhelp and things worked great. Can anyone help us understand why the sequence buttons are not showing up in the output even though it does in the topic preview?
    Also
    This shows up in the  layout.css file:
    a.wBSBackButton {
                    margin: 0 8pt 0 0;
                    padding: 0;
                    background-color: transparent;
    img.wBSBackButton {
                    border: none;
    a.wBSNextButton {
                    margin: 0 8pt 0 0;
                    padding: 0;
                    background-color: transparent;
    img.wBSNextButton {
                    border: none;
    Also btw, I forgot to mention that we are linking our FrameMaker files.
    Appreciate the help.
    Thanks!

    hi pradeep
    It does not happen but if you Wait for a while that may be solved

  • Problem with the XI-Audit log entries in the table "XI_AF_MSG_AUDIT"

    Hi,
    I have an async-szenarios for PO:
    We send Idoc's from SAP ERP to a WebService via SOAP. And we take Ack's. We use Integrationsprocess with deadline block to catche the errors after the retrying (three times) and to send they via e-mail.
    Our problem is, the number of the audit logs in the table "XI_AF_MSG_AUDIT":
    In the RTW only we see one audit log (with three retries) in an error case. But in the table XI_AF_MSG_AUDIT there are about 76 entries for the same audit log in the error case and about 20 entries in the case of the succuessfull processing.
    This number of the entries in the table causes problem with the size of the redo log file and delete job of cours the large size of the table and therefore problem on the data base. The table can not be controlled. The delete job can not run and cancels every time due this redo log problems
    What can cause that?
    How can it be prevented, that so much entries are not be made in the  table "XI_AF_MSG_AUDIT".
    Best regards
    Gueltekin

    Hi Gueltekin,
    I am only aware of the general property auditLogEnabled of J2EE Engine Service SAP XI AF Core, which controls in general (default = true) that entries in the AF Message Audit log are written at all.
    (see [http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm])
    I assume that your scenarios in the error case is sending up to three messages and for each message the number of audit log infos are created. You might want to check the detailed entries in the log and see from where they are comming, you might use customer modules etc. as well.
    Best regards,
    Silvia

Maybe you are looking for