Problems with the Resume feature

Hello.
Since I installed Lion I've been having a problem with the Resume feature. I've been searching for a solution, or at least others with the same problem, but in vain.
I've always used the feature, but sometimes it works, other times not so much. As an example: I might have Safari opened with multiple tabs and TextEdit opened with multiple windows too, even Finder with multiple windows opened. I shutdown/restart with Resume checked and when it's login in the first thing I see are all the windows I had from last time, after a few moments the Safari window disappears (but the application is still opened), or the TextEdit windows disappear, or even Finder or other application I might had open before. It seems to be a little random in terms of what applications "lose" their windows at login, sometimes all, a few, or none.
Is anyone having the same problem? Is it a bug or a problem with the installation?
Appreciate the help.

are some of these apps on fullscreen mode? they will disappear after opening, since they can't all be visible at the same time.
and do you use spaces? similar story, if the app in question is in a space other than finder.

Similar Messages

Problems with the Diff-Feature

Hello there,
i am new to EMF-Compare and i use it to compare parts of my models. I have enountered a problem with the comparison where there are differences but the compare algorithm cant find them.
here are my two models
Here is the code i use:
IComparisonScope scope = new DefaultComparisonScope(sourceEPackage,
deletedModelEPackage, null);
Comparison comparison = EMFCompare.builder().build().compare(scope);
List<Diff> differences = comparison.getDifferences();
After i have run the code the list is empty.
Any other changes are found and properly shown.
The model on picture 2 is contained in another element not shown in the screenshot. Is it possible that this causes the error?
I am using org.eclipse.emf.compare with version 3.0.2.201501201328
I would appreciate any help. Thank you.

Hi Simon,
Unfortunately, EMF Compare doesn't support the comparison of EGenerics inside EType Parameters yet. So it is normal that you see no differences in your case.
You can raise an enhancement bug to describe what you need: https://bugs.eclipse.org/bugs/enter_bug.cgi?product=EMFCompare
If you're interested to contribute to EMF Compare and manage this case, you can follow the contributor guide: https://wiki.eclipse.org/EMF_Compare/Contributor_Guide
Regards,

Is anyone having problems with the Notes feature in the new Mountain Lion OS? When I open this feature it begins to pinwheel and then it closes and I get an error message!

I am getting an error message when opening Notes with the new Mountain Lion OS. When it opens it begins to pinwheel and then it closes and an error message box opens up. Is anyone else having this problem?

Try this: http://forums.adobe.com/message/2796075

I use a Gmail account in Mac Mail and I'm having problems with the Notes feature

Whenever I create a note two copies are saved in the All Mail folder. One that is titled "New Note" without any content in the note and another that is the actual note that I meant to make. Why does Gmail create the unnecessary "New Note"?

Hi
I have just upgraded from an iPod touch to iPhone and the notes app won't work at all. It imported note from my iPod (which used to work fine) but will not let me add or delete notes and the contents of the notes are also screwed up. If it was a computer app I would bin it and reload but how do you that with an iPhone.
I can't face calling the Apple help line. Anyone any suggestions?

Problems with the shuffle feature in itunes.

When I first bought my nano I would create playlists in itunes and turn the shuffle on there. You would see on the screen that the playlist was shuffled, and it would be when you went to use the ipod. After an update though I would do the same thing and the itunes screen shows it shuffling but the ipod plays the songs in alphabetical order still. Even when I plug the nano back in to my computer the itunes still show's it as shuffling. my software is the most up to date version.
anyone else having this problem?

To shuffle a playlist on an iPod, in the settings menu, make sure that shuffle is set to "songs". Then select any playlist, then press play (not select). The songs within that playlist will be shuffled.

Adobe Muse problem with the "pin" feature

I am creating a prototype under the tablet setup. I can't access the "pin" function for some reason. It won't activate at all. Seems deactivated. Anyone know why?

Hi thanks again,
I'm a little weary of providing the url's as they are prototypes of a product not yet released and this work is being done as part of client pitch. I have been using muse as a means of prototyping our work to communicate with development and test out visuals, and transitions. This tool has been extremely helpful for me as I am a designer that has very limiting coding skills.
I can tell you that I'm not using a web font (I find the image output of text [not web-friendly] is pretty jaggedy) so I have been doing the majority of my work as part of png's as pages. Both sites are making use of the same png's output from Photoshop. They are completely one png. All assets are image files actually, which lends me to believe that somehow the web output of muse is rendering the images better than the desktop output.
re: Were the desktop and tablet layouts created in the same or different .muse files? No they were created in different .muse files.
re: Do they both have the same setting for "Convert opaque PNG to JPEG" in the "Content" panel of Site Properties? Yup they both have those checked.
Hope that helps:) I love the program, but am looking forward to enhancements. I would love to provide user feedback somehow. Do you know how I may accomplish this?

Error thread java : problem with the function "resume 0x***" (forum sun)

One problem with the function of jdb occured when I tried to use it to
pilot the processor with differents threads. In fact, I use a simple example with 2 threads.
I stop the two threads with two breakpoint, and I want to resume one or the other (with the function "resume 0x****"), the one wich I resumed stop again on the breackpoint and I decide again to resume one or the other. All of that to obtain a tree of execution.
I give you the code of the class and the code of jdb.
CLASS: (it's just a object Room with a variable degre that I increment and decrement with two threads increase and decrease)
public class Test{
     public static void main(String[] args){
          Room r = new Room();
          decrease de = new decrease(r);
          increase in = new increase(r);
          de.start();
          in.start();
class Room {
     private volatile int degre=20;
     public void more(){
     degre += 4;
     public void less(){
     degre -= 3;
class decrease extends Thread{
private Room room;
public decrease(Room r){
          room =r;
public void run(){
try{
     while (!interrupted()){
          room.less();
catch(InterruptedException e) {}
class increase extends Thread{
private Room room;
public increase(Room r){
     room =r;
public void run(){
     try{
          while (!interrupted()){
               room.more();
catch(InterruptedException e) {}
JDB:
Initializing jdb ...
stop at Test:7Deferring breakpoint Test:7.
It will be set after the class is loaded.
runrun Test
Set uncaught java.lang.Throwable
Set deferred uncaught java.lang.Throwable
>
VM Started: Set deferred breakpoint Test:7
Breakpoint hit: "thread=main", Test.main(), line=7 bci=30
7 in.start();
main[1] stop at room:16
Set breakpoint room:16
main[1] stop at room:20
Set breakpoint room:20
main[1] resume
All threads resumed.
>
Breakpoint hit: "thread=Thread-0", room.less(), line=20 bci=0
20 degre -= 3;
Thread-0[1] threads
Group system:
(java.lang.ref.Reference$ReferenceHandler)0x10d Reference Handler cond. waiting
(java.lang.ref.Finalizer$FinalizerThread)0x10c Finalizer cond. waiting
(java.lang.Thread)0x10b Signal Dispatcher running
Group main:
(decrease)0x146 Thread-0 running (at breakpoint)
(increase)0x147 Thread-1 running (at breakpoint)
(java.lang.Thread)0x148 DestroyJavaVM running
Thread-0[1] resume 0x147
Thread-0[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] resume 0x147
Thread-1[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] print degre
degre = 24
Thread-1[1] resume 0x146 //It's here the problem, thread 0x146 have to stop on the //next breakpoint of decrease but nothing happen
Thread-1[1] resume 0x147
Thread-1[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] clear
Breakpoints set:
breakpoint Test:7
breakpoint room:16
breakpoint room:20
PS: I tried many other examples with other class and other kind of breakpoints, but, in any cases, on thread doesn't manage to resume. When I try with general resume (no specification of the thread), It works but it isn't interresting for me because I want to decide wich thread continue his execution.

Hi,
I have read the FAQ of the JMF.
The problem was the jar files of the JMF were not in the JRE\BIN\EXT
folder of the Java runtime!
now it works!
thanks
Reg

Is there a known problem with the iPhone 4 personal hotspot? I have not been able to use this feature for about 3 days with any of my other idevices - it does not come up as available.

My iphone 4 never had a problem with the personel hotspot until 2-3 days ago .
Now when I turn the hotspot on none of my other i-devices can see it. I have tried the turn on/off thing and I have tried the complete turn off holding the 2 buttons on both the phone and the other devices (ipad x 2 and ipods x 3). This is very frustrating.
Oh and I have spoken to my carrier it is not them.
Any suggestions?

Setting >> General >> Cellular >> Cellular Data Network >> Reset Setting
Restart (hold on/off button >> slide to power off)
I got same prob after update ios 6.1 (not sure during update to 6.0.1) iphone 5

Problems with the Proxy Programme--Please help

Hi All,
I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
ProxyServer:::>posting request
ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
ProxyServer:::>postRequest
I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
ProxyServer:::>posted request successfully
ProxyServer:::>writing response
ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
ProxyServer:::>writeResponse exiting
ProxyServer:::>wrote response successfully
I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
package server.proxy;
//import all servlet related classes
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import server.resources.*;
//My Proxy server --->Currently it is very simplea and relies on
//other proxy servers of an already connected network.
public class ProxyServer extends HttpServlet
//stores the resource bundle
private ServerResBundle resBundle = null;
//checks for the mode of operation
private boolean proxySet = false;
private String proxy = null;
//storing the original System out/err etc
private PrintStream sysOutOrig = null;
private PrintStream sysErrOrig = null;
private InputStream sysInOrig = null;
//initialise certain features that are required later
public void init() throws ServletException
try
//initialise the resource bundle
this.initResBundle();
System.out.println("ProxyServer:::>res bundle init");
//set the mode of operation
this.setMode();
System.out.println("ProxyServer:::>mode set");
//set the system out and err --System.setOut etc
this.setSystemOutErr();
System.out.println("ProxyServer:::>in/out/err set");
}//End try
catch(Exception e)
System.out.println("Exception in init..."+(e.getMessage()));
throw new ServletException(e);
}//Edn
catch(Throwable e)
System.out.println("Irrecoverable Error...");
throw new ServletException(e);
}//End
}//End init
//method to init the resource bundle;
private void initResBundle()
this.resBundle = ServerResBundle.getBundle();
}//End
//method to set the mode of the server--proxy or direct
private void setMode()
//read the target proxy property from the bundle and
//if it is set,take that URL
String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
if ( (temp != null) && (temp.length() > 0) )
this.proxySet = true;
this.proxy = temp;
temp = null;
}//End
}//End
//method to set the system out and err etc
private void setSystemOutErr() throws Exception
//keep a copy of the original system out and error
this.sysOutOrig = System.out;
this.sysErrOrig = System.err;
try
//read the options adn if they are set, take the values directly
String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
if ((newOutStr != null) && (newOutStr.length() > 0))
System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
}//End if
if ((newErrStr != null) && (newErrStr.length() > 0))
System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
}//End if
}//End
catch(Exception e)
//restore the stuff
System.setOut(this.sysOutOrig);
System.setErr(this.sysErrOrig);
}//End
}//End
//this is where the proxy functionalities will be embedded
public void service(HttpServletRequest req,HttpServletResponse resp)
throws ServletException,java.io.IOException
//conenction URL
URL target = null;
//conenction to the remote object
URLConnection targetConn = null;
//stores the OOS and the OIS
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
try
//check for the mode of operation
if (proxySet)
URLConnection objects go through two phases: first they are created, then they are connected.
After being created, and before being connected, various options can be specified
(e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
if necessary.
//for the URL to the proxy
target=new URL(this.proxy);
//conenct to the proxy
targetConn = target.openConnection();
//set the details of the connectuon
targetConn.setDoInput(true);
targetConn.setDoOutput(true);
targetConn.setUseCaches(false);
// If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
targetConn.setAllowUserInteraction(true);
//connect to the remote object
// targetConn.connect();//call this only when all the request properties are set
System.out.println("ProxyServer:::>posting request");
//post the received request to the URL
this.postRequest(targetConn,req);
System.out.println("ProxyServer:::>posted request successfully");
System.out.println("ProxyServer:::>writing response");
//receive the response
//write the received response to the client
this.writeResponse(targetConn,resp);
System.out.println("ProxyServer:::>wrote response successfully");
}//End if
else
//currently this functionality is not supported
throw new ServletException(
(String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
}//End
}//End try
catch(Exception e)
if(e instanceof ServletException)
throw (ServletException)e;
}//End
if (e instanceof IOException)
throw (IOException)e;
}//End
//wrap it up in ServletException
throw new ServletException(e);
}//End
}//End
//method to write the response back to the client
private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
throws ServletException
//get all the header fields from the response connection and set them to the
//response of the servlet
Map headerFields = null;
Iterator headerFieldEntries = null;
Map.Entry header = null;
//stores the input stream to the conn
BufferedReader brConn = null;
//stores the writer to the response
PrintWriter prResp = null;
//checks if the proxy authentication needed or not
boolean proxyAuthReqd = false;
try
//juste ensuring that the proxy authentication is reset
proxyAuthReqd = false;
if( (targetConn != null) && (resp != null) )
//Returns an unmodifiable Map of the header fields.
//The Map keys are Strings that represent the response-header field names.
//Each Map value is an unmodifiable List of Strings that represents the corresponding
//field values
headerFields = targetConn.getHeaderFields();
//Returns a set view of the mappings contained in this map
Set temp = headerFields.entrySet();
//Returns an iterator over the elements in this set
headerFieldEntries = temp.iterator();
if (headerFieldEntries != null)
while (headerFieldEntries.hasNext())
Object tempHeader = headerFieldEntries.next();
if (tempHeader instanceof Map.Entry)
header = (Map.Entry)tempHeader;
Object headerName = header.getKey();
Object headerValue=header.getValue();
System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
//do not select the key-value pair if both the key adn the value are null
if ( ( headerName == null) && (headerValue == null) )
continue;
}//Enmd
if (headerValue != null)
List headerValList = null;
if (headerValue instanceof List)
headerValList = (List)headerValue;
}//End
if(headerValList != null)
for (int i=0;i<headerValList.size();i++)
Object headerValueStr = headerValList.get(i);
if (headerValueStr instanceof String)
//note that the header-key can not be null for addHeader
//I have made this temporary provision to make the programme work.
resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
(String)headerValueStr);
//check if the proxy authentication required or not
if (((String)headerValueStr).
indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
//proxy authentication is needed
proxyAuthReqd = true;
}//End
}//Ednd of
else if (headerValueStr == null)
resp.addHeader(( (headerName==null)? null :(String)headerName),
null);
}//End
}//End for
}//End if
}//End if
}//End
}//End while
}//End if
//get the writer to the client
prResp = resp.getWriter();
System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
//juste test a simple header
System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
//if the proxy asks you for authentication,pass on the same to the client
//from whom you have received the request.When this flag is true,the connection
//is closed by the remotehost adn hence any attempt to open in input steram
//results in an error ie IOException
if (!proxyAuthReqd)
//now get the content adn write it to the response too
brConn = new BufferedReader(new InputStreamReader(
targetConn.getInputStream()));
String tempStr = null;
while ((tempStr = brConn.readLine())!=null)
prResp.println(tempStr);
}//End while
//close the connections
brConn.close();
}//End if
else
prResp.println("Proxy Authentication needed...");
}//End
//close the streams
prResp.flush();
prResp.close();
}//End if
System.out.println("ProxyServer:::>writeResponse exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
//method to post request to the internet
private void postRequest(URLConnection targetConn,HttpServletRequest req)
throws ServletException
//extract the header parameters and the body content from the incoming request
//and set them to the new connection
Enumeration reqHeaders = null;
//reads the incoming request's content
BufferedReader brReqRd = null;
PrintWriter prResWt = null;
//stores temp header names and values
String headerName = null;
String headerValue = null;
try
if( (targetConn != null) && (req != null) )
reqHeaders = req.getHeaderNames();
//extract a header adn set it to the new connection
while (reqHeaders.hasMoreElements())
headerName = (String)(reqHeaders.nextElement());
headerValue = req.getHeader(headerName);
targetConn.setRequestProperty(headerName,headerValue);
System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
}//End
System.out.println("ProxyServer:::>postRequest\n");
//establis the actual connection
//calling this method bfore the above loop results in IllegalStateException
targetConn.connect();
//NOTE : try reading from and writing into OIS and OOS respectively
//now read the contents and write them to the connection
// brReqRd = req.getReader(); //this hangs for some reason
brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
System.out.println("Got the reader..brReqRd = "+brReqRd);
if (brReqRd != null)
String temp = null;
//establish the printwriter
// prResWt = new PrintWriter(targetConn.getOutputStream(),true);
prResWt = new PrintWriter(targetConn.getOutputStream());
System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
System.out.println("In while::>temp = "+temp);
prResWt.println(temp);
}//Emd while
//close the streams adn go back
brReqRd.close();
prResWt.flush();
prResWt.close();
}//End
}//End outer if
System.out.println("ProxyServer:::>postRequest exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
}//End

Hi serlank ,
Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks...

Problem with the calculator and modifications needed

i have got a problem with the calculator on my iphone i.e i cannot find any DEL key or Backspace....the problem is when typing a long value if one number is entered wrong we should start again.
EXAMPLE...if i need to type 114678047 * 345612
if acidentally if i type 114678047 * 3455 ( then i should start over typing "C" key)
i should start over to type the whole data..if we have a delete key we can just correct it right away and continue.....rather than starting over
we can find this feature in all the other smart phones , i dont know why apple coudnt find that
even every scientific calculator have a DEL key...
Thanks
vickyk7

FEEDBACK
If you want to give Apple feed back then do it here http://www.apple.com/feedback/iphone.html

There is a problem with the Outlook database. Your database could not be rebuilt. [-18000]

For home use, I recently changed from Windows PC to MacBook Air. I have an iPhone 4 which I synched without problem to the PC. Since I have used Outlook for years on Windows and trusted advisors assured me Microsoft Office on the Mac is the same as Microsoft Office on Windows, I decided to continue using Microsoft Office. Because I cannot get my Outlook calendar to sync reliably to iCal / iPhone and because I have found a small but meaningful number of features I use daily in Outlook Windows do not work on Outlook Mac, I have never been in so much pain!
The latest problem is Outlook does not complete startup. I get this error:
There is a problem with the Outlook database. To use the database, you must rebuild it using the Database Utility.
I run the utility but it never completes successfully.
Step 1 of 5: Scannning...
Step 2 of 5: Verifying...
Step 3 of 5: Copying records to new database...
Step 4 of 5: Recovering data...
Your database could not be rebuilt. [-18000]
I have found many articles about this problem but they all seem to assume that you can successfully start Outlook then you rebuild the database to fix data corruption in Outlook.
What if I Outlook never completes startup?

Here are the steps that solved the Outlook data corruption problem.
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook/your-datab ase-could-not-be-rebuilt/5caff467-3ab2-464a-9fe6-00ad913b5f2e
The question was: Your database could not be rebuilt
The key is to create a new Outlook Identity, remove the database file, then copy your data records into the new identity and use the Outlook database utility to rebuild the database.
It's a wonderful feeling to see Outlook start up successfully after a few days of downtime!

Is Anyone Having Problems with the newer version of Firefox?

I still have my older Mac OsXv10.4 Tiger software. I wasn't exactly happy with Safari browser as it would block many sites and were considered incompatible so I downloaded the free Firefox browser (the 2.0 version) of which I STILL have. I'm aware that there is a much newer version and would like to download that, but I've heard a lot of people saying they have been having severe problems with it, but then they have PCs and not Macs.
So my question is for you Mac users that use Firefox, have you had major problems with the newer version? I'm real hesitant to download if I'm going to have the same problem PC users are having...like constantly crashing. Also would my old Tiger software be compatible? I don't want to upgrade to Leopard.

Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

Problem with the NodeManager in Weblogic 10.0 MP1

Hi,
I have a problem starting the Nodemanager successfully. I have currently installed BEA Weblogic 10.0 MP1. The admin server is getting started successfully. When, I start the Nodemanager with the command:
startnodemanager -machine <hostname>, it neither gives the success message nor the error message. It comes to a stand still. Please see the below text, which appears on the Command prompt, when I run the nodemanager command.
Machine PUNITP128166D.ad.infosys.com
Listen Address: PUNITP128166D.ad.infosys.com
Listen Port: 8097
PID for D:\Ariba9r1\shared/bin/startNodeManager.cmd: 5980
D:\Ariba9r1\BuyerDev9r1\Server\bin>
D:\Ariba9r1\BuyerDev9r1\Server>set CLASSPATH=D:\BEA10\wlserver_10.0\server\lib\A
ribaWebLogic81Patches.jar;.;D:\BEA10\jdk150_11\lib\tools.jar;D:\BEA10\wlserver_1
0.0\server\lib\weblogic_sp.jar;D:\BEA10\wlserver_10.0\server\lib\weblogic.jar;
D:\Ariba9r1\BuyerDev9r1\Server>chdir /d "D:\Ariba9r1\shared\nodemanager"
D:\Ariba9r1\shared\nodemanager>"D:\BEA10\jdk150_11\bin\java.exe" -client -Xms32m
-Xmx200m -XX:MaxPermSize=128m -XX:+UseSpinning -Xverify:none -classpath "D:\BE
A10\wlserver_10.0\server\lib\AribaWebLogic81Patches.jar;.;D:\BEA10\jdk150_11\lib
\tools.jar;D:\BEA10\wlserver_10.0\server\lib\weblogic_sp.jar;D:\BEA10\wlserver_1
0.0\server\lib\weblogic.jar;" -Dbea.home=D:\BEA10 -Djava.security.policy=D:\BEA1
0\wlserver_10.0\server\lib\weblogic.policy -DSavedLogsDirectory=D:\Ariba9r1\shar
ed\nodemanager\logs -DJavaHome=D:\BEA10\jdk150_11 -DTrustedHosts=D:\BEA10\wlserv
er_10.0\common\nodemanager\config\nodemanager.hosts -DListenAddress=PUNITP128166
D.ad.infosys.com -DListenPort=8097 -DReverseDnsEnabled=true -DLogToStderr=true -
DLogFile=D:\Ariba9r1\shared\nodemanager\nodemanager.log -DNodeManagerHome=D:\Ari
ba9r1\shared\nodemanager weblogic.NodeManager
After this, when I check the nodemanager status in Console, then the status appears as REACHABLE. Assuming, this to be the successfully message, I try to start the managed servers associated with the Machine/Server. But, it fails and there appears a message on the console with the status as 'Force Shutting Down' for this server.
When I check the logs, there seems to be some problem with the Nulll exception. Please see the below logs as it appears, its only a part of the logs
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040306> <JMS service is active now.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <SAFService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226041> <BEA-281003> <SAF Service has been initialized.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <SAFService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226041> <BEA-281002> <SAF Service has been started.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226120> <BEA-101128> <Initializing HTTP services.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101135> <buyerserver1 is the default Web server.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101052> <[HttpServer (defaultWebserver) name: buyerserver1] Initialized>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101129> <Initializing the Web application container.>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226198> <BEA-180046> <INFO: Logging service enabled.>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC license service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Task Manager instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC security service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Transaction service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226229> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226229> <BEA-220027> <Web Service reliable agents are started on the server.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <JMX> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226604> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://PUNITP128166D.ad.infosys.com:8050/jndi/weblogic.management.mbeanservers.runtime .>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebLogicServer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226651> <BEA-000287> <Invoking startup class: ariba.j2ee.appserver.weblogic.Startup.startup(directory=D:\Ariba9r1\BuyerDev9r1\Server)>
####<Jun 28, 2010 4:20:27 PM IST> <Info> <WebLogicServer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722227229> <BEA-000288> <ariba.j2ee.appserver.weblogic.Startup reports: Changed directory to D:\Ariba9r1\BuyerDev9r1\Server>
####<Jun 28, 2010 4:20:27 PM IST> <Info> <Management> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722227244> <BEA-141187> <Java system properties are defined as follows:
ariba.server.home = D:\Ariba9r1\BuyerDev9r1\Server
awt.toolkit = sun.awt.windows.WToolkit
bea.home = D:\BEA10
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.headless = true
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBOracleJDBC.zip;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBDB2JDBC.zip;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBMssqlJDBC.zip;D:\BEA10\wlserver_10.0\server\lib\weblogic.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes;D:\Ariba9r1\BuyerDev9r1\Server\classes\AribaJ2EE.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions;D:\BEA10\wlserver_10.0\server\lib\wls-api.jar
java.class.version = 49.0
java.endorsed.dirs = D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed
java.ext.dirs = D:\BEA10\jdk150_11\jre\lib\ext
java.home = D:\BEA10\jdk150_11\jre
java.io.tmpdir = C:\DOCUME~1\suram_vishal\Local Settings\Temp\
java.library.path = D:\BEA10\jdk150_11\bin;.;C:\SYSROOT\system32;C:\SYSROOT;D:\BEA10\wlserver_10.0\server\bin;D:\BEA10\jdk150_11\bin;D:\BEA10\patch_wlw1001\profiles\default\native;D:\BEA10\patch_wls1001\profiles\default\native;D:\BEA10\wlserver_10.0\server\native\win\32;D:\BEA10\wlserver_10.0\server\bin;D:\BEA10\modules\org.apache.ant_1.6.5\bin;D:\BEA10\jdk150_11\jre\bin;D:\BEA10\jdk150_11\bin;D:\Ariba9r1\BuyerDev9r1\Server\bin;D:/Ariba9r1/BuyerDev9r1/Server/bin/Win32;D:/Ariba9r1/BuyerDev9r1/Server/bin;C:\SYSROOT\system32;C:\SYSROOT;C:\SYSROOT\System32\Wbem;C:\Program Files\Java\jre1.5.0_06;C:\Program Files\CA\SharedComponents\CAUpdate\;C:\Program Files\CA\SharedComponents\ThirdParty\;C:\Program Files\CA\SharedComponents\SubscriptionLicense\;C:\Program Files\CA\eTrustITM;C:\Program Files\CA\SharedComponents\ScanEngine;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\BEA10\wlserver_10.0\server\native\win\32\oci920_8;D:\Ariba9r1\BuyerDev9r1\Server;D:\Ariba9r1\BuyerDev9r1\Server\bin;D:\Ariba9r1\BuyerDev9r1\Server;D:\Ariba9r1\BuyerDev9r1\Server\lib\Win32;D:\Ariba9r1\BuyerDev9r1\Server\internal\lib\Win32
java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
java.protocol.handler.pkgs = weblogic.utils|weblogic.utils|weblogic.utils|weblogic.net
java.runtime.name = Java(TM) 2 Runtime Environment, Standard Edition
java.runtime.version = 1.5.0_11-b03
java.security.policy = D:\BEA10\wlserver_10.0\server\lib\weblogic.policy
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.5
java.vendor = Sun Microsystems Inc.
java.vendor.url = http://java.sun.com/
java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi
java.version = 1.5.0_11
java.vm.info = mixed mode
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 1.5.0_11-b03
javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
javax.xml.rpc.ServiceFactory = weblogic.webservice.core.rpc.ServiceFactoryImpl
javax.xml.soap.MessageFactory = weblogic.webservice.core.soap.MessageFactoryImpl
org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
org.xml.sax.driver = weblogic.apache.xerces.parsers.SAXParser
org.xml.sax.parser = weblogic.xml.jaxp.RegistryParser
os.arch = x86
os.name = Windows 2003
os.version = 5.2
path.separator = ;
sun.arch.data.model = 32
sun.boot.class.path = D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\serializer.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xalan.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xercesImpl.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xml-apis.jar;D:\BEA10\jdk150_11\jre\lib\rt.jar;D:\BEA10\jdk150_11\jre\lib\i18n.jar;D:\BEA10\jdk150_11\jre\lib\sunrsasign.jar;D:\BEA10\jdk150_11\jre\lib\jsse.jar;D:\BEA10\jdk150_11\jre\lib\jce.jar;D:\BEA10\jdk150_11\jre\lib\charsets.jar;D:\BEA10\jdk150_11\jre\classes
sun.boot.library.path = D:\BEA10\jdk150_11\jre\bin
sun.cpu.endian = little
sun.desktop = windows
sun.io.unicode.encoding = UnicodeLittle
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = Cp1252
sun.management.compiler = HotSpot Client Compiler
sun.os.patch.level = Service Pack 2
user.country = US
user.dir = D:\Ariba9r1\BuyerDev9r1\Server
user.home = C:\Documents and Settings\suram_vishal
user.language = en
user.name = suram_vishal
user.timezone = Asia/Calcutta
vde.home = D:\BEA10\user_projects\VanillaBuyer\servers\buyerserver1\data\ldap
weblogic.Name = buyerserver1
weblogic.ReverseDNSAllowed = false
weblogic.classloader.preprocessor = weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
weblogic.management.server = http://PUNITP128166D.ad.infosys.com:8099
weblogic.net.http.URLStreamHandlerFactory = ariba.util.net.URLStreamHandlerFactory
weblogic.nodemanager.ServiceEnabled = true
weblogic.security.SSL.ignoreHostnameVerification = true
weblogic.security.TrustKeyStore = DemoTrust
weblogic.system.BootIdentityFile = D:\BEA10\user_projects\VanillaBuyer\servers\buyerserver1\data\nodemanager\boot.properties
>
####<Jun 28, 2010 4:20:29 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <main> <<WLS Kernel>> <> <> <1277722229510> <BEA-000365> <Server state changed to STANDBY>
####<Jun 28, 2010 4:20:29 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <main> <<WLS Kernel>> <> <> <1277722229525> <BEA-000365> <Server state changed to STARTING>
####<Jun 28, 2010 4:20:29 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722229572> <BEA-149209> <Resuming.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230182> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_NEW to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149060> <Module Buyer of application Buyer successfully transitioned from STATE_NEW to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_PREPARED to STATE_ADMIN on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149060> <Module Buyer of application Buyer successfully transitioned from STATE_PREPARED to STATE_ADMIN on server buyerserver1.>
####<Jun 28, 2010 4:20:35 PM IST> <Warning> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722235212> <BEA-101162> <User defined listener ariba.server.ormsserver.ServletContextListener failed: java.lang.NullPointerException.
java.lang.NullPointerException
     at java.util.Hashtable.put(Hashtable.java:396)
     at ariba.j2ee.weblogic.Properties.initialize(Properties.java:53)
     at ariba.j2ee.core.J2EEServer.initialize(J2EEServer.java:77)
     at ariba.j2ee.core.AribaServletContextListener.contextInitialized(AribaServletContextListener.java:25)
     at ariba.server.ormsserver.ServletContextListener.contextInitialized(ServletContextListener.java:26)
     at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:458)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:168)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1744)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2909)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:973)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:361)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:182)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:359)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
>
####<Jun 28, 2010 4:20:35 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722235212> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_ADMIN to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:35 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
####<Jun 28, 2010 4:20:35 PM IST> <Alert> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
####<Jun 28, 2010 4:20:35 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Kindly help me in getting this resolved.
Thanks,
Vishal.

The error appears to come from the ariba code. I suggest asking them.
java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:396)
at ariba.j2ee.weblogic.Properties.initialize(Properties.java:53)

I have 3 computers. i want to get files from one to another. it doesn't work, i think it is a problem with the apple id?

i have 3 computers. i want to get files from one to another. it doesn't work, i think it is a problem with the apple id?

Roger:
Zugriffsrecht means Access Right according to the translators.
martinamm:
You can't do what you want with iCloud. You will need to setup remote access to your main computer with VPS or some similar remote access application. With VPS you have an application running on your main computer turning it into a server and an client app on your laptop so you can access it remotely. There are many such apps out there, some probably more feature filled than VPS. You might post in the system forum that you're running and ask there.
OT

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

Problems with the Resume feature

Similar Messages

Maybe you are looking for