Problems with the richTextEditor and quotes
Hello
I'm having problems with quote chars and the richText
control's htmlText. When users enter quotes into the richTextEditor
control. The quotes breaks the HTML text, meaning it's no longer
well formatted. Is there an escape char that I need to use. Or do I
need to force some kind of refresh on the control prior to using
the htmlText string?
I have been using RTE in a content management system and
found a need to replace non-standard quote characters with proper
UTF-8 character counterparts. Curly quotes in particular are
problematic. Use a replace function to substitute non-standard for
standard characters.
Similar Messages
-
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
Problem with the MenuBar and how can i delete a own component out of the storage
Hello,
I opened this thread in the category "Flex Builder 2", but
under this category my questions fit better.
I have a problem with the MenuBar and a question to delete a
component out of storage.
1. We have implemented the MenuBar, which was filled
dynamically with XML data.
Sporadically it will appear following fault, if we "mousover"
the root layer.
RangeError: Error #2006: Der angegebene Index liegt
außerhalb des zulässigen Bereichs.
at flash.display::DisplayObjectContainer/addChildAt()
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
at mx.managers::SystemManager/addChild()
at mx.managers::PopUpManager$/addPopUp()
at mx.controls::Menu/show()
at mx.controls::MenuBar/::showMenu()
at mx.controls::MenuBar/::mouseOverHandler()
Here a abrid ged version of our XML to create the MenuBar:
<Menuebar>
<menu label="Artikel">
<menu label="Artikel anlegen" data="new_article" />
<menu label="Artikel bearbeiten" data="edit_article" />
<menu label="Verpackung">
<menu label="Verpackung anlegen" data="new_package" />
<menu label="Verpackung bearbeiten" data="edit_package"
/>
</menu>
<menu label="Materialgruppe">
<menu label="Materialgruppe anlegen"
data="new_materialgroup" />
<menu label="Materialgruppe bearbeiten"
data="edit_materialgroup" />
</menu>
</menu>
</Menuebar>
It is a well-formed XML.
2. Delete a component out of storage
We have some own components (basically forms), which will be
created and shown by an construct e.g.
var myComponent : T_Component = new T_Component ;
this.addChild(myComponent)
Some of our forms will be created in an popup. On every call
of the popup, we lost 5 mb or more, all childs on the windows will
be removed by formname.removeAllChild();
What cann we do, that the garbage collector will dispose this
objects.
Is there a way to show all objects with references (NOT
NULL)?
I have read in the Flex Help, that
this.removeChild(myComponent) not delete the form and/or object out
of the storage.
Rather the object must be destroyed.
It is sufficient to call delete(myComponent) about remove
this object out of the storage as the case may be that the
garbage-collector remove this object at any time?
Or how can I destroy a component correctly. What happens with
the widgets on this component e.g. input fields or datagrids?
Are they also being deleted?
Thanks for your help.
MatzeIf you mena the "photo Library" then you cannot delete it.
This is how iphone handles photos. There are not two copies. There a re simply two places from which to access the same photos. ALL photos synced to iphone can be accessed via Photo Library. Those same pics can be accessed via their individual folder. -
Is there a problem with the itunes and quick time download pages or is it my internet.
Is there a problem with the itunes and quicktime download pages or is it just my internet.
Some more developments ... the issue appears to be browser-specific. I can't see the download controls at the moment in either IE 8 (I'll get your message) or Safari for Windows 5.0.5 (I'll just get the blank box). But I can see the download controls in Firefox 4 and Chrome (whatever version I have of that).
So it might be worth installing Firefox and seeing if you can get the downloads via that:
http://www.mozilla.com/en-US/firefox/new/ -
I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrade?
try rebooting your computer.
-
when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.
Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick -
Error: There is a problem with the file and it cannot be copied
I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything! -
I bought my iphone from carephone warehouse, sim free and with no contract. 5 months down the line I had a problem with the phone and I booked a genius appointment, they swapped my phone and gave me a new phone but they locked my phone to tmobile!!! I now do not use tmobile and I have an iphone which is locked to tmobile!!! I bought an unlocked phone and apple have locked it!!! what can i do?
In response to this, Carphone Warehouse (and Phones4U) sell what is commonly referred to as "sim free" handsets - these are not the same as unlocked. Sim free handsets will automatically lock to the first network sim card that the phone is activated with, and that will be permanently. The only way to unlock the handset would be to go through the network (T-Mobile I understand) and request they unlock it for you. More than likely, there will be a charge as you are no longer a T-Mobile customer.
If you ever want to purchase a new unlocked iPhone, the only place you can buy one is from Apple directly. Any other place will most likely sell sim free handsets. -
I have a problem with the battery and my iPhone 4S is restarting all the time. The phone was bought in June 2012 in LA. What can I do?
Since your iPhone is still under the one year warranty contact Apple Support or visit an Apple store to get a replacement.
Apple Support - http://support.apple.com/kb/HE57 -
I have a problem with the sound and voice communication programs amplifier
I have a problem with the sound and voice communication programs amplifier
Define "voice of the device."
Are you referring to the ear speaker or main speaker? Phone calls? Rings/alerts? Music?
What troublshooting steps did you take? -
I have a second generation shuffle and even though (after charging) the green battery light is on it soon turns orange and red. Is there a problem with the battery and if so is it fixable?
If it's a 2nd gen shuffle, it is probably about six years old at this point. The cause is likely to be a worn out battery that is no longer able to hold its charge for very long.
It is technically fixable. This web site has repair guides
http://www.ifixit.com/Device/iPod_Shuffle
But it is very small, so you need to be good at doing such things. The cost to have a repair shop do the work is likely to be uneconomical, compared to the cost of a brand new 4th gen shuffle ($50), which has more features (and possibly double the storage) plus a one-year warranty. -
Not event 6 month i already got a problem with the sound and i cannot watch youtube or any video using my Ipad. Please help
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
When I first attempt to power on my MacBook Pro, the LED blinks but the MBP doesnt turn on. However when I try a second time the LED blinks but my Mac turns on. Is this a problem with the hardware and can it be fixed?
Also, I apparently have to replace my battery. Could the problem have any relevance to a dead battery?Have you held the power button down for 10+ seconds? That should turn it off.
Ciao. -
I have a problem with the calendar and notifications, every time I dismiss or snooze locks up and hangs, just reboot goes.
Have you run Disk Utility/Repair Permissions and/or deleted the .plist from your user library To see the user library, hold down the option key while using the Finder Go to Folder command.
-
Problem with the calculator and modifications needed
i have got a problem with the calculator on my iphone i.e i cannot find any DEL key or Backspace....the problem is when typing a long value if one number is entered wrong we should start again.
EXAMPLE...if i need to type 114678047 * 345612
if acidentally if i type 114678047 * 3455 ( then i should start over typing "C" key)
i should start over to type the whole data..if we have a delete key we can just correct it right away and continue.....rather than starting over
we can find this feature in all the other smart phones , i dont know why apple coudnt find that
even every scientific calculator have a DEL key...
Thanks
vickyk7FEEDBACK
If you want to give Apple feed back then do it here http://www.apple.com/feedback/iphone.html
Maybe you are looking for
-
Summary for all Profit Centers in the Profit Center Report
There should be a summary for all Profit Centers in Profit Center Report. Now there is only summary by Sort Code but should be also summary for all Sort Codes.
-
Hi I have created a save function in my program to save new data and append it at the end of a single file. Here is the code. private void SaveActionPerformed(java.awt.event.ActionEvent evt) {//GEN-FIRST:event_SaveActionPerformed Vector<PointO
-
Uninstall IE10 script or other remote command
Hi, Please note that I originally submitted this under Internet Explorer category and was told to move it here. Obviously on a localised, single PC, to uninstall IE10 and revert to IE8 you would simply go into Control Panel, Programs & Features, View
-
I can't listen file .wma, and the computer opened automatically safari to the page Flip4Mac: I want to listen file.wma without installing software is not from Apple, how can I solve this problem? Thank you everyone
-
Dollar Symbol change from '$' to 'o' after SP patch
Dear Experts, We have updated the following support packages: SAP_BASIS 14-18 SAP_ABA 14-18 PI_BASIS 14-18 SAP_BW 15-20 SAP_AP 12-15 EA-HR 23-61 SAP-HR 23-61 E-RECRUITMENT 18 After that, Some webdynp