Problems with the Space designer

Forgive my poor English on this, i don't really know how to explain this but:
When i record a guitarpart with a delay made in the space designer, i hear 'cracks' in my headphones and on my monitors (looks like the sound when a recording is clipping but the input signal is low enough)
When i play back the recorded part, or when i bounce it, i don't hear a thing.
It's pretty annoying when your recording, because sometimes i start playing off-tempo because i get destracted to much by the cracks.
Is there any solution to it, or is my computer just too slow?
I'm running Logic Studio on a Macbook,1.83 Ghz, 2 gig ram, 250 gig hd, 5400 rpm.
Should i try recording on my external 7200 rpm drive instead?

What do you use for the arped delay? I can imagine if this is a stereo delay and the sound comes back at periods at the same time (because it is in tempo) it will crack at certain points some how (volume doubling). Maybe try to switch the phase on the delay one channel (if stereo). Still remains odd it doesn't crackle when you play it back though...

Similar Messages

I have a problem with the space on my shuffle

Hi guys!
I had about 500 MB of music on my shuffle and I added some more (about 150 MB). Then, in the Settings tab, I saw that the 'Other' data was taking up 88.4 MB of space. Why is this? I have disabled disk space use on the iPod. Before I added more music, the 'Other' data was only taking up 4-5 MB.
Any help would be appreciated.
Thanks.

Try restoring your iPod. Restoring will erase the iPod's hard drive, reload the software and put it back to default settings: Restoring iPod to factory settings with iTunes 7

Anyone else having problems with the space bar on pavilion g6-1220sa? i press it - but...

it works sometime but not others...

connect a usb keyboard to see if the issue is repeated. If it is not then contact HP for warranty support.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Space problems with the SAP Database MS SQL 2000

Hi,
Actually, I have a size problem with the database, I have MS SQL Server 2000 with Service Pack4 on a Windows 2003 Server environment that is my DataBase Server of my ERP ECC 6.0. On the other hand I have a storage where I have 229 Gb of free space used only for the database files of the SAP data and the SAP log file.
But when I check the DB space allocation on trx. DB02 I saw this:
3 Database files and 1 transaction log:
The 3 database files are: PRDDATA1 (size 15,313 MB used 15016 MB) , PRDDATA2 (size 14106 MB used 13984 MB), PRDDATA3 (size 14472 MB used 14352 MB) and the log file is PRDLOG1 ( size 1000 MB) all of them with no limit option and growth by 10%.
So I went to the SQL Enterprise Manager and I saw that my Database PRD properties and I got this information:
My database size is 44892.48 Mb size with only 1330.36 Mb of free space and that is alarming.
So the question here is how ,if I have a storage where the sap data is storing with 229 Gb of free space, can I make the database files grow up in order to use all the available space of my storage.
Can you help me please because it is critical being my productive system?
Best Regards
Erik Espinosa

I resolved this issue myself. Thanks for all your help.
Best Regards,
Erik Espinosa

Due to the rumored heat problems with the iPad 3, is there a danger in using a leather case design for it.

I recently purchased a 64 GB Verizon LTE iPad, along with a Bear Motion leather case designed specifically for that model. I've been reading a lot about the heat problems with the new iPad and although I haven't noticed them on mine, I'm worried that putting it in the case may cause worse problems. Is this something I should be concerned about?

Unless you have a defective iPad you should be fine. The only time it should be heating up is when you're running an intensive app like a game that's working the quad-core processor and the screen. I bought a Targus leather case for mine and play InfinityBlade2 on it and haven't noticed any heating issues with mine, but the part holding the iPad is plastic, so it can disipate heat better.
If your iPad gets too hot it'll warn you, so I'd use it for now and see what happens. It'll shut down before it causes any permanent damage.

Problems with the CS5.5 Design Premium Suite on OSX Lion?

Hi, did anybody had already problems with the CS5.5 Design Premium Suite on OSX Lion? I purchased the software as a Volume licenced product recently and everything was working fine, until since few days my Indesign and Illustrator keep crashing on launch. I de-installed and re-installed the entire CS5 Suite on my iMac, but Indesign and Illustrator still keep on crashing while launching. I already rang the Adobe tech support but they are not very helpful at all... Its quite frustrating.

Pat76 wrote:
Hi, did anybody had already problems with the CS5.5 Design Premium Suite on OSX Lion? I purchased the software as a Volume licenced product recently and everything was working fine, until since few days my Indesign and Illustrator keep crashing on launch. I de-installed and re-installed the entire CS5 Suite on my iMac, but Indesign and Illustrator still keep on crashing while launching. I already rang the Adobe tech support but they are not very helpful at all... Its quite frustrating.
No problems here with CS5. After I upgraded to Lion I did update to 5.5 and still did not experience any problems. There are some handy articlles on Adobe's web site relating to compatability with Lion, but I have experienced none. Have you checked the third party plug-ins in Illustrator and InDesign for compatability if you have any installed?
Pete

I installed Adobe CS6 Design & Web Premium on my Mac Book Pro a few years ago but have repeatedly encountered problems with the programs freezing or not opening properly. It's a Student and Teacher Licensing version so an academic ID is required but I am

I installed Adobe CS6 Design & Web Premium on my Mac Book Pro a few years ago but have repeatedly encountered problems with the programs freezing or not opening properly. It's a Student and Teacher Licensing version so an academic ID is required but I am no longer a student--can I still reinstall it since my academic ID may no longer be valid?

Erin Elzo as long as the serial number has been registered under your account at http://www.adobe.com/ then you should be able to continue to utilize the software. You can find details on how to locate your registered serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

I'm having problems with the install of iTunes 10.7 it seems to be going well and then at the very end of the blue bar it doesnt seem to complete? All of my software is up to date and plenty of space on the mini?

I'm having problems installing iTunes 10.7. It seems to be going well and then at the last part of the blue bar it just doesn't complete. All software is up to date and there is plen of room on the mini? I have tried like 4 times and am ready to throw it out the window.

I noticed some problems with the Apple Support sites here the last day or so.
Try again using > Apple - iTunes - Download iTunes Now

Office Web Apps Server 2013 - Word Web App - Problem with Tab space

Hello We have Office Web Apps Server 2013 running with SharePoint 2013. Users Editing a Word document with Office Web Apps, can't use "Tabs", any Word document with Tabs; the tabs are replaced with a single space.
Has anyone noticed this? Is this a bug?
-thanks
thomas
-Tom

Yes, currently the Word Web App does not support
Tab Keyboard shortcut for editing document content .
For more information, you can have a look at
the article:
http://office.microsoft.com/en-us/office-online-help/keyboard-shortcuts-in-word-online-HA010378332.aspx?CTT=5&origin=HA010380212
http://social.technet.microsoft.com/Forums/en-US/3f5978d3-67a1-4c8c-981f-32493d72610b/office-web-apps-server-2013-word-web-app-problem-with-tab-space?forum=sharepointgeneral

Problem with the hierarchial fields in a Purchase order xml report

Hi,
I am having a problem with the hierarchy problem. We are populating attribute 15 of a PO header. some times it can be null. FYI, we are using 11.5.10 instance where oracle supports direct PO template rather than having a rdf file.
And now in the xml report, if attribute15 of po header is not null then it is fine.
But if attribute15 is null, then the template is picking from the next available attribute15 that is from the po lines. As the line level group of "LINES" is between the "PO_DATA" (header group), hence the template is checking for next available attribute15.
Can any one please suggest how to design the template where we can make the template to check only for that tag at the header level group rather than the line level group tag?
Thank You in advance.
Regards,
Srinivas.

Hi
Incase you want to transfer attachements from SRM to R/3, then you try implementing the BADI in SRM side. The BADI which will help in this case is
BBP_CREATE_PO_BACK BADI.
Please read the standard SAP documentation of this BADI using SE18 Transaction, before making any code changes.
Few Important SAP OSS notes to refer in this case ->
Note 989184 - Transferred shopping cart with internal attachments
Note 550071 - FAQ: EBP - Shopping Cart
Note 916347 - Transfer shopping cart with internal attachments
Note 1001130 - FAQ - Attachment questions (Buyside)
Few useful links ->
http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
Re: Attachments to backend
Re: Document Attachments in Shopping Cart
Re: Attachment in SRM
Re: SRM Documents and Attachments
Re: Limit in Attachments of an item in Shopping Cart
Re: return delivery text from material document is not passed to SUS

Do let me know, incase you face any problems.
Regards
- Atul

Hello, I have a problem with the iPod, is that the iPod does not sync all the songs that are on my Itunes. I have 373 songs on the iPod and iTunes 512 in ... What do I do?

Hello,i have a problem with the Ipod,is that the Ipod doesn't sync all the songs in my Itunes. I have 373 songs in my Ipod and 512 sons in my Itunes. What do i do?

Hello,
I take it you haven't unticked any of the songs listed on your iTunes Library? Also have you tried selecting all your songs which you wish to add to your iPod, and dragging them over your Devices "iPod Nano"; and seeing if that copies all songs on to your iPod?
Another idea is just check that your iPod has enough space for the rest of your songs to be added to your device.
Hope this helps.

Problem with the GridBagLayout Manager

Hello i am new to Java Swing and i am facing a problem with the GridBagLayout layout manager . the code in question is attached. First compile and run the code. It will execute w/o probs . Then go to the "Console" tab. There the diff components (6 buttons and 1 text area) are haphazardly arranged where as all measures where taken to prevent it in the code. The GridBagLayout manager for this tab is not working properly please help.
The code in question:-
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class MainForm extends JFrame{
     JTabbedPane jtp = new JTabbedPane();
     Container generalContainer; // container for the general pane
     Container consoleContainer; // container for the console pane
     GridBagLayout consoleLayout = new GridBagLayout(); // GridBagLayout for the console
     GridBagConstraints consoleConstraints;// GridBagConstraints for the console
     public MainForm()
          super("Welcome to Grey Griffin -- Network Simulator");
          setSize(700,600);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          JPanel generalPane = new JPanel();
          generalPane.setLayout(new BoxLayout(generalPane, BoxLayout.Y_AXIS));
          JPanel consolePane = new JPanel();
          consolePane.setLayout(new BoxLayout(consolePane, BoxLayout.Y_AXIS));
          JPanel designPane = new JPanel();
          designPane.setLayout(new BoxLayout(designPane, BoxLayout.Y_AXIS));
          JPanel outputPane = new JPanel();
          outputPane.setLayout(new BoxLayout(outputPane, BoxLayout.Y_AXIS));
          //Setting up Layout for all the tabs
           //for general tab
           FlowLayout layout= new FlowLayout();
           generalContainer = generalPane;
           layout.setAlignment(FlowLayout.CENTER);
           generalContainer.setLayout( layout );
           //for console tab
           consoleContainer = consolePane;
           consoleConstraints = new GridBagConstraints();
           // *******Finished********
          //********** All buttons text areas are declared here**********
            //*******for the general tab**********
          JButton generalCreate = new JButton("Create a New Network");
          JButton generalOpen = new JButton("Open an Existing Network");
          JButton generalSave = new JButton("Save the Network");
          JButton generalSaveAs = new JButton("Save As..........");
          JButton generalExit = new JButton("Exit");
          //******END******
         //*******for the console tab
             //text area
          JTextArea consoleCode = new JTextArea();
          consoleCode.setEditable(true);
          consoleCode.setMaximumSize(new Dimension(700,400));
          consoleCode.setAlignmentX(0.0f);
               //text area complete
             //*******for the Console tab**********
          JButton consoleCompile = new JButton("Compile Code");
          JButton consoleSimulate = new JButton("Simulate Code");
          JButton consoleReset = new JButton("Reset");
          JButton consoleOpen = new JButton("Open script files");
          JButton consoleSave = new JButton("Save script files");
          JButton consoleConvert = new JButton("Convert Script files to graphical form");
          //***************END****************
     //Adding buttons and text areas to there respective tabs
          // for the general tab
          generalContainer.add(generalCreate);
          generalContainer.add(generalOpen);
          generalContainer.add(generalSave);
          generalContainer.add(generalSaveAs);
         generalContainer.add(generalExit);
         //****END****
          // for the console tab
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleOpen,0,0,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleSave,1,1,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleConvert,1,2,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleCode,1,0,3,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleCompile,2,0,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleSimulate,2,1,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleReset,2,2,1,1);
          //****END****
          // adding the tabs
          jtp.addTab("General",null,generalPane,"Choose General Options");
          jtp.addTab("Design",null,designPane,"Design your own network!!");
          jtp.addTab("Console",null,consolePane,"Type commands in console for designing");
          jtp.addTab("Output",null,outputPane,"View output");
          getContentPane().add(jtp, BorderLayout.CENTER);
          //****END****
     //This method is used to ad the buttons in the GridBagLayout of the Console tab
     private void addComp( Component c,int row,int column,int width,int height)
        // set gridx and gridy
        consoleConstraints.gridx=column;
        consoleConstraints.gridy=row;
        //set gridwidth and grid height
        consoleConstraints.gridwidth=width;
        consoleConstraints.gridheight=height;
        //set constraints
        consoleLayout.setConstraints(c,consoleConstraints);
        consoleContainer.add(c);
     class TabManager implements ItemListener
          Component tab;
          public TabManager(Component tabToManage)
               tab = tabToManage;
     public void itemStateChanged(ItemEvent ie)
          int index=jtp.indexOfComponent(tab);
         if (index!=-1)
              jtp.setEnabledAt(index,ie.getStateChange()== ItemEvent.SELECTED);
         MainForm.this.repaint();
public static void main(String args[])
     MainForm form = new MainForm();
     form.setVisible(true);
}

Thanks for the suggestions. I did away with the GridBagLayout Altogether :-D
and put all the buttons in a seperate JPanel and added that JPanel into the Console tabs container which was using a BorderLayout this time. Take a look
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class MainForm extends JFrame{
     JTabbedPane jtp = new JTabbedPane();
     public MainForm()
          super("Welcome to Grey Griffin -- Network Simulator");
          setSize(800,600);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          JPanel generalPane = new JPanel();
          generalPane.setLayout(new BoxLayout(generalPane, BoxLayout.Y_AXIS));
          JPanel consolePane = new JPanel();
          consolePane.setLayout(new BoxLayout(consolePane, BoxLayout.Y_AXIS));
          JPanel designPane = new JPanel();
          designPane.setLayout(new BoxLayout(designPane, BoxLayout.Y_AXIS));
          JPanel outputPane = new JPanel();
          outputPane.setLayout(new BoxLayout(outputPane, BoxLayout.Y_AXIS));
          //Setting up Layout for all the tabs
          //**for the general tab
           Container generalContainer;
           FlowLayout layoutGeneral= new FlowLayout();
           generalContainer = generalPane;
           layoutGeneral.setAlignment(FlowLayout.CENTER);
           generalContainer.setLayout( layoutGeneral );
           //**for the console tab
            Container consoleContainer;
            consoleContainer = consolePane;
            consoleContainer.setLayout(new BorderLayout() );
           //Creating buttonpanel for adding the buttons
            JPanel buttonPanel1 = new JPanel();
            buttonPanel1.setLayout(new GridLayout(1,3));
            JPanel buttonPanel2 = new JPanel();
            buttonPanel2.setLayout(new GridLayout(1,3));
          // All buttons / text areas / images are declared here
          //**Buttons for the general tab**//
          JButton generalCreate = new JButton("Create a New Network");
          JButton generalOpen = new JButton("Open an Existing Network");
          JButton generalSave = new JButton("Save the Network");
          JButton generalSaveAs = new JButton("Save As..........");
          JButton generalExit = new JButton("Exit");
          //declaring the buttons
          JButton consoleCompile = new JButton("Compile");
          JButton consoleRun = new JButton("Run");
          JButton consoleReset = new JButton("Reset");
          JButton consoleOpen = new JButton("Open script files");
          JButton consoleSave = new JButton("Save script files");
          JButton consoleConvert = new JButton("Convert Script files to graphical form");
          //declares the textarea where the code is written
          JTextArea consoleCode = new JTextArea();
          consoleCode.setEditable(true);
          consoleCode.setMaximumSize(new Dimension(500,600));
          consoleCode.setAlignmentX(0.0f);
          //Adding buttons and text areas to there respective tabs
          //**Buttons and text pads for the general tab**
               generalContainer.add(generalCreate);
          generalContainer.add(generalOpen);
          generalContainer.add(generalSave);
          generalContainer.add(generalSaveAs);
             generalContainer.add(generalExit);
          //adding buttons to the button panel 1
          buttonPanel1.add(consoleOpen);
          buttonPanel1.add(consoleSave);
          buttonPanel1.add(consoleConvert);
          //adding buttons to the button panel2
          buttonPanel2.add(consoleRun);
          buttonPanel2.add(consoleReset);
          buttonPanel2.add(consoleCompile);
          //adding button panels and textarea
          consoleContainer.add(buttonPanel1,BorderLayout.NORTH);
          consoleContainer.add(consoleCode,BorderLayout.CENTER);
          consoleContainer.add(new JScrollPane(consoleCode));
          consoleContainer.add(buttonPanel2,BorderLayout.SOUTH);
          //adding the tabs
          jtp.addTab("General",null,generalPane,"Choose General Options");
          jtp.addTab("Design",null,designPane,"Design your own network!!");
          jtp.addTab("Console",null,consolePane,"Type commands in console for designing");
          jtp.addTab("Output",null,outputPane,"View output");
          getContentPane().add(jtp, BorderLayout.CENTER);
     class TabManager implements ItemListener
          Component tab;
          public TabManager(Component tabToManage)
               tab = tabToManage;
     public void itemStateChanged(ItemEvent ie)
          int index=jtp.indexOfComponent(tab);
         if (index!=-1)
              jtp.setEnabledAt(index,ie.getStateChange()== ItemEvent.SELECTED);
         MainForm.this.repaint();
public static void main(String args[])
     MainForm form = new MainForm();
     form.setVisible(true);
}

Problem with the XML in Word 2007 (Word Template)

Hi Experts,
i am new on CRM 2007 and i have a problem with the XML Structure of the Word Template.
First i built a Web Service Design Tool. Then i saw on the Testpage, that it works.
So i started the Document Templates and created a new Template. Object Type was BUS2000126 - CRM Business Activity. Web Service was my created and tested Web Service Tool.
As i opened the Word 2007 with the XML-Structure, i recognized, that there was something wrong.
The Responce on my Testpage from the Web Service Tool had the following structure:
response (test.types.p1.CrmostZlaWord5ReadResponse)
   Output (test.types.p1.CrmostZla010RoszlaWord5001)
        ZlaWord5 (test.types.p1.CrmostZla010Rosbtorder)
            Administrativeheaderoforder (test.types.p1.CrmostZla010Rosbtorderhea001)
                 Partiesinvolvedofheader (test.types.p1.CrmostZla010Rosbtheaderpa001)
                     Allpartiesinvolved (test.types.p1.CrmostZla010Rosbtpartnera002[]) Displaying 3 elements of 3
                          element1 (test.types.p1.CrmostZla010Rosbtpartnera002)
                               Btpartneraddress (test.types.p1.CrmostZla010Rosbtpartnera001)
My Problem is now, that the XML-Structure got not that point "element1".
Instead of "element1" there is the point "item" in my XML-Structure in Word 2007.
I guess that is the Problem why i am not getting the fields of the Btpartneraddress filled in my Word.
Can anyone help me? Or put me in the right direction that i can change the XML?
Thanks for your help
André

Hi andré, I guess the issue is coming from the fact that you selected "AllPartiesInvolved" and that may contain any numbers of entries. So when you test your webservice, you put a key and then get a result for that key, and in that case you might get "element1" until "element3" for example if there was 3 partners involved in you activity.
But, when you design your template, you don't have a key at that moment, so in the Web Service structure, you have "items" which stands for all the possible entries you might retrieve at runtime. I guess you could use an index in your template to specify which item you need, but this is quite hasardeous, so i would be you, I would not design my web service to use "AllPartiesInvolved" but rather a specific Partner type like contact person for instance.
Regards,
Xavier

There is a problem with the photo with the filename "null". The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book.

Absolutely INFURIATING.
I have spent absolute hours building a photo album for the first year or my sons life. Sorting through quite literally thousands and thousands of images. Got a brilliant looking album using 177 of them.
Now everytime I try to check out it won't get past page 1 of building the book.
It says the following "There is a problem with the photo with the filename "null". The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book.".
The images all look perfect. I have even tried taking them out and re adding the first page images from the library.
Same problem.
This is so annoying. So far I have NOT been happy with this iphoto application having nothing but problems with missing thumbnails. Corrupted images. Things that have never happened to me using a windows machine.

Do the filenames contain special characters, like "ä,ü,..." or white space or are the vry long? Is there anything special about the image format? Try to export the edited versions in that case and reimport it with a different, shorter filename.
For testing, create a new book with only the images you want to check.
If this does not fix it, try rebuilding. Depress the option and command keys, launch iPhoto and rebuild the library.

Problem with "The Movies" game DVD

Ok, here is my problem.
I bought the game "The Movies", at first it was working fine, but one evening, I tried to upload a movie and it just didn't do it. I tried 3 or 4 times, but I could never upload my movie.
So I stop trying and the day after when I tried to play, I put my DVD in my computer, when I tryed to play, it says put the DVD in the computer, but the DVD was already in, so I took it out, cleaned it and put it back, but then the DVD never appeared on the desktop.
I tried many other DVD/CD and everything works just fine.
Then I delete everything from the game (maybe I shouldn't have) and tried again, but nothing.
Later I learn that a Flip4Mac update was causing some problem with the game and I did something when installing a mod, I had the french version, but the .txt in the mod was in english, so I add, the english (en-UK) in a file.
Now, I rebought the game + the expansion (The Movies + The Movies Stunts & Effects, the english version this time) and the same thing is going on, the "The Movies" DVD won't appear on the desktop, but when I put "Stunts & Effects" in it works fine.
What can I do?
Please help.

"I tried to upload a movie and it just didn't do it. I"
How much free drive is on your Mac? Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better.
Boot from your restore disk and make sure the boot disk is free of errors. Restart your Mac while holding down the C key, pressing the power button and inserting your restore disk all at the same time. An Installer window will open, but do not proceed with any installations. Instead, from the Menu Bar, select Utilities/Disk Utility. In the Disk Utility window click First Aid, and then click Verify. If Disk Utility reports errors, click Repair. When Disk Utility is finished, from the Menu Bar, select Utilities/Startup Disk. Select MacintoshHD 10.x.x and click Restart.
Carolyn

Problems with the Space designer

Similar Messages

Maybe you are looking for