Problems with the Switches...

I bought my 2nd Gen. iPod Shuffle only a few days ago and I need some help...
First of all regarding the power switch, if switched too far into the "on" position power does not run, but will if it is not all the way in the on position.
Secondly my iPod shuffle will not enter normal cycle mode. When switched from shuffle to normal cycle, nothing happens, the iPod keeps on shuffling. It's annoying. For this I've verified my list on songs and tried to follow with no luck. I've tried restoring my iPod more than once, completely wiping the songs and starting over with again, no luck.
Does anybody have any suggestions as to what to do in this situation to get the cycle function fixed? Might I just be better off phoning this in?
Anything would help really.
Thanks.

I bought my 2nd Gen. iPod Shuffle only a few days ago
and I need some help...
First of all regarding the power switch, if switched
too far into the "on" position power does not run,
but will if it is not all the way in the on position.
Secondly my iPod shuffle will not enter normal cycle
mode. When switched from shuffle to normal cycle,
nothing happens, the iPod keeps on shuffling. It's
annoying. For this I've verified my list on songs and
tried to follow with no luck. I've tried restoring my
iPod more than once, completely wiping the songs and
starting over with again, no luck.
Does anybody have any suggestions as to what to do in
this situation to get the cycle function fixed? Might
I just be better off phoning this in?
Anything would help really.
It's faulty, really... get it replaced under warranty at an Apple Store or through http://www.apple.com/support/contact/

Similar Messages

Problems with the switch-case

How do you place a shitch with a interval like in Pascal???
For example>
switch (i)
case 1 to 1000:
case 1001 to 2000:
can you help me??????

switch (i) << i can be an int, short, char, byte
case x: << x can be an int, short, char, byteSlightly misleading.
switch (i) << i can be an int, short, char, byte
case x: << MUST BE A CONSTANT (AT COMPILATION TIME).

Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?

only $99, i thought it was closer to $175.

I bought an iPhone 5 around fifteen days back and it has already started to give problem with the on/off button. I have to press it five six times to switch it on or off. I am so frustrated by the fact that if I bring it to the service centre, I am going

I bought an iPhone 5 around fifteen days back and it has already started to give problem with the on/off button. I have to press it five six times to switch it on or off. I am so frustrated by the fact that if I bring it to the service centre, I am going to get a refurbished phone in place of my brand new phone which I just bought. The idea of a used phone repulses me. Any solutions ?

sumeshdua wrote:
The idea of a used phone repulses me.
Why? Your current phone is used... it has been since the instant it was removed from the shrink wrap and turned on.
sumeshdua wrote:
Any solutions ?
Live with the phone as is.
Take the device to Apple for evaluation... it may not need replacement.
Even if it does, neither you or the Apple tech should be able to tell if the replacement is new or refurbished.

Anyone having problems with the on/off switch

anyone having problems with the on/off switch. It sometimes does not work, I occasionally have to pull the plug out and replug then hit the button and it goes on?

Out of the 100+ millions of iPhone, I'm sure there are many people that have that same problem. If you do, you have a 1 year warranty... take it in before it runs out.

New out of box , unable to switch on is there a problem with the battery as i thopugh it should be partly charged.

new out of box , unable to switch on is there a problem with the battery as i thopugh it should be partly charged.

Plug it in for 15 minutes. If it doesn't come on hold the HOME button (the round one) and the SLEEP button (the one on the top) at the same time until an Apple logo appears (about 10 seconds). If nothing appears on the screen after 30 seconds you have a dead phone; take it back for exchange.

Problem with the new server UCS C220 for set IP to CIMC

Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regards

You may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help

I am having a strange problem with the awesome bar

The awesome bar/location bar is no longer as awesome as it used to be. When I start typing in an address it seems like it no longer checks through my history and gives a list of possible matches but just gives the stem of an address. For example, if I type in 'goo' it will complete this to 'google.com' if I then append this with an '/a' it will complete this to 'google.com/analytics' but that's as good as it gets, as I say, no list from the history or bookmarks.
I've checked the options and also about:config and all the settings are as they should be, as far as I can tell (and I certainly hadn't changed any of them when it started misbehaving). I've also disabled all extensions and plug-ins.
It's driving my slightly bonkers because I quite often use sites with long addresses and can't remember each of the components of each address. I'd switch to using Chrome but I also use Firebug a fair bit so don't really want to do this.

Hi cowtan, Sorry you are having problems with the awesome bar.
I imagine the new behaviour may be reversed by changing some pref but I have not looked that up.
Regardless of the new behaviour you seem to have some fault as my awesomebar still gives bookmarked items.
As a troubleshooting step try adding an asterisk in the awesomebar (as first character or anywhere) that should then filter the results in the dropdown list to bookmarked only items, does that work ?
* see [[Search your bookmarks, history and tabs with the Awesome Bar#w_changing-results-on-the-fly]]_changing-results-on-the-fly
You possibly have some extension interfering with the awesome bar, try Firefox in safe mode (but do NOT* at this stage try the Reset Firefox option)
<nowiki>*</nowiki>'''edit''' - personal opinion, if a user; such as you; is knowledgeable enough to use ''about.config'' the easy solution of ''FirefoxReset ''is probably not the best route, as it can have unwanted side effects that are avoidable.
* [[Troubleshoot Firefox issues using Safe Mode]]
Do your bookmarked items appear in safe mode ?
Try a new Profile. The best method for troubleshooting this will be to set up a new Firefox profile, you can then: experiment, troubleshoot, alter settings or extensions installed in that profile without changing and potentially damaging your current profile.
* http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
I suggest to prevent unexpected problems you
* use a sensible name such as test 2012 for the profile name
* ensure an empty folder is used & do not then rename or delete the new profile (instead add or delete shortcuts to it)
* also see http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

T.code FBL5N: a problem with the print of the output list

Hi All,
with reference to the t.code FBL5N, I have a problem with the print of the output list of the report.
When I execute the print, I obtain one customer for each page printed.
I wonder if is possible to obtain more customers for each page printed.
Could anyone help me?
Thanks
Gandalf
Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PM

Hi,
Though personally i havent tried this option, check the same
Go to Menu: Settings >> Switch List
This will make the value displayed in ALV format and then try taking print outs.
Regards,
Sridevi

There is a problem with the security certificate of the proxy server. Error code 18 and 38.

Hi All,
After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
Exchange 2013 on a remote location with a CA-certificate.
Outlook 2010 and 2013 on different locations, locally installed and on RDS.
When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
certificate is invalid or does not match the name of the site."
Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
- restarting mailserver and AD;
- restarting switches;
- restarting routers;
- restarting RDS, AD and all other servers;
- bypassed proxyserver for RDS;
- created a new profile;
- checked recently installed updates;
- checked certificate on mailserver;
- checked RDS on a different location, working fine.
Nothing helped, what can I do next? Please advice.
Regards.

Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
The first message can be suppressed by adding this to the Exchange config:
set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
Not completely where I want to be, any help regarding the second alert is greatly appreciated!

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

My ipod touch will not switch on and is no longer recognised by itunes. Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.

My ipod touch will not switch on and is no longer recognized by itunes. Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.
I tried to restore it and I got error code 2009, so I closed it tried again got error code 1659, now it wont do anything and it's not recognized by my pc /itunes please help x

For the restore error messages try:
iTunes: Specific update-and-restore error messages and advanced troubleshooting

Problems with the iPod Touch (sound)

Hey,
I was wondering (more like desperately hoping) someone can help me with my problem.
I've had my iPod touch for almost 2 years now but lately I've been getting problems with the sound.
When I bought the iPod, I bought some decent sennheiser plug-in earbuds too, because I find the one's delivered with the ipod pretty low quality.
For over a year, I loved my ipod touch (it's my second one) but one day, for some unknown reason, my sound was at not even half of the usual volume.
I've checked the settings but cannot find the problem, so I tested the ipod ears delivered with the ipod since they were new, same story (the left earbud was slightly louder than the right for some time but not too long, then they both gone quiet).
I've checked on the internet before and someone said "try jailbraking your ipod, because that sometimes helps, so I did but no effect.
So I set it back to fabric settings and went to a switch store, they listened and found it odd too so they send it in because it was still under guarantee.
Now (today), I've gotten a completely new ipod touch 16 Gb. So, happy as I was, I went home to put my music on it, and what happens? The sound is slightly louder than the previous one but still WAY too quiet! If I'm on the bus, its no use listening to it because I cant understand the lyrics cause of the background noizes the bus makes... Its p*¨ssing me off bigtime that its still way too quiet, anyone got any ideas how to fix it?
Please don't send useless reply's like get ya ears checked because Im in the army and they get checked regularly and they are perfectly fine!
Maybe with someone knows some other program or app that I can use so I can fix this very irritating problem?
I have had 6 iPods before, from the first one that came out to the ipod touch 16 Gb, and its only with this one that Ive started having problems about a year ago.
Plus my girlfriend has an ipod too (not a touch) and on her ipod, everything works fine, my earbuds included :s
Please help!
Thanks in advance!
Toby

Omg, I've put over 2 hours of work in it to reinstall other versions of itunes, ios n such to then find out that they DID NOT test my ipod and sennheiser earbuds that I gave in along with my busted itouch.... They told me they work fine... Now I took my girlfriends earbuds cause nothing worked, turned out they are both broken and now I need to go back to the store for new ones, dont think that the previous itouch wasnt busted then after all cause it was, tried with 10 different sets of earbuds
anyway Im a happy man again with a decent itouch and good earbuds, that I can lend from me girlfriend...
Thanks for the help anyway

Since Firefox 32.0 was downloaded on 3/9/14 I am experiencing brief hanging when clicking onto websites or links. Is this a problem with the new version of Fire

If I click onto any link or webpage I am quite often getting a briefing 'hanging' before Mozilla responds. I also get a message at the top of my screen stating that Firefox is not responding and the loading symbol justs spins in circles until it eventually frees up and opens the page. Prior to Firefox 32.0 being downloaded on 3/9/14 I had no problems with this 'hanging' at all. I can only assume it is a Firefox issue as I do not have the same issues if I use Internet Explorer or any other programs installed on my computer.

You can check for problems with the history that is stored in the places.sqlite database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
There are other things that need your attention.
Note that your System Details List shows multiple Flash plugins.
*Shockwave Flash 15.0 r0
*Shockwave Flash 14.0 r0
*Shockwave Flash 13.0 r0
You can find the installation path of all plugins on the about:plugins page.
*http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
*(32 bit Windows) C:\Windows\System32\Macromed\Flash\
*(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\

'A problem with the cooling system' error message on Satellite A660

Hi all,
Hope I can get some help here. I've had about 5 HP laptops after all of them had problems and faults. I got sick of them and therefore got a refund and bought a high spec A660-1FH.
The A660 has been a great laptop for two days until yesterday when I started getting a warning message saying 'A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service'.
The cpu fan works fine as you can here it spinning and the temperature of the i5-460m processor is around 40 degrees for both cores - which seems normal to me. I've noted that it happens only when running on battery and if you switch from eco utility to power saver mode. Its fine when running on the 'balanced' power setting. The fan is louder before when this message appears.
As its under 28 days my retailer swapped it for a brand new one straight away. Got the new one home, and the same message appears again. Has anyone else experienced this. As two laptops have had this, I'm wondering if this is normal for the A660 series laptop or if there is really a hardware issue?!
I have tried to upgrade eco utility and the bios of the laptop but both are the latest versions. Can anyone help or share if they experience a similar issue with their laptop?
Thanks

In front of me I have Satellite A660-13Q (PSAW3E) and I have it about 6 weeks now. It runs almost 10 hours daily and until now I didnt notice such message or anything else that can be suspect for hardware functionality.
I really dont know why this happen on your notebook and dont think there is anything you can do about it.
I would exchange it again. What you can also try is to contact nearest Toshiba service. Make a call, explain the situation and ask if they can help you with this.

Problems with the Switches...

Similar Messages

Maybe you are looking for