Problems with the System.Windows.Forms.Timer

Hi All,
Could some one help me please? I'm having a problem using the System.Windows.Forms.Timer inside an ItemEvent, the timer event just doesn't works...give a look in my code:
private System.Windows.Forms.Timer myTimer = new System.Windows.Forms.Timer();
if (pVal.FormUID.Equals("FrmTimer") && pVal.ItemUID.Equals("btnStartTimer") && (pVal.Before_Action.Equals(true)) && (pVal.EventType.Equals(SAPbouiCOM.BoEventTypes.et_CLICK)))
            myTimer .Interval = 1000;
            myTimer .Enabled = true;
            myTimer .Tick += new EventHandler(myTimer _Tick);
void myTimer _Tick(object sender, EventArgs e)
            SBO_Application.MessageBox("Timer: " + DateTime.Now, 1, "OK", "", "");
does someone have already tried to use the timer inside an itemevent, or could suggest another solution?
thanks a lot...

Hi Bruno,
Unfortunately you cannot use a Forms.Timer without using a windows form (ie not a SBO form). Have you looked at the other 2 timer objects in .Net, the System.Timer.Timer and System.Threading.Timer? Here's a link to a web page that goes through the differences between each one:
http://msdn.microsoft.com/msdnmag/issues/04/02/TimersinNET/
Kind Regards,
Owen

Similar Messages

  • I have an iMac OS X 10.6.8 and have problems with the backup Disk for Time Machine disconnecting itself with the message that I ejected it improperly.. It ejected itself - why?

    I have an iMac OS X 10.6.8 and have problems with the backup drive to Time Machine ejecting itself and so does not automatically backup the way it is meant to do. It is connected with an USB cable to my iMac. What could cause this - malfuntioning drive?

    The "iLife" apps are not part of any Mac operating system install and are a separate purchase.
    Once you get past 10.6.6 you can purchase and download iPhoto, GarageBand and iMovie. iWeb and iDVD have been discontinued.
    Snow Leopard 10.6.6 and higher include the App Store application which is what you use to purchase Lion.

  • 140063685933 this is the receipt no Apart of two purchase there all rest I never received was a problem with the system they couldn't be download and naw you are charging me  Haw unprofessional is that and more than an hour can't find how to get to custom

    140063685933 this is the receipt no
    Apart of two purchase there all rest I never received was a problem with the system they couldn't be download and naw you are charging me
    Haw unprofessional is that and more than an hour can't find how to get to customer service to correct the mistake
    Just so fed up will never ever pitches anything waiting of time and money  

    Apple is not here. Apple does not answer questions here. There are only volunteer users here.
    The charge to your credit card takes place before you download the app.
    If you are having problems downloading the apps that you bought, you will need to explain the issue in detail if you wish someone to help you.

  • Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"

    Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
    I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
    I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
    The relevant log is the following:
    [2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
    label 
    hostname DIAZSERVER
    port 3389
    loadbalanceinfo 
    ui.swapmousebutton false
    remote.program ||ZWaveUtil
    remote.workingdirectory 
    remote.name ZWave Adapter Utility
    remote.args 
    rail true
    soundmode 0
    connect_to_console false
    redirectsdcard true
    performance_flags 134
    arc.sessionid 0
    anonymous_username 
    authentication_level 2
    use_redirection_server_name false
    username administrator
    gateway [
      host = DIAZSERVER
      port = 443
      bypass = false
    connect info[
      hostnames = [localhost]
      gatewayHost = DIAZSERVER
      gatewayPort = 443
      routingToken = Cookie: mstshash=administrator
      redirectionGUID = 
      proxyHost = 200.5.68.10
      proxyPort = 8080
      sessionId = -1
    [2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
    [2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
    [2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    AsioEndpointContext (0): startup(): starting up down context
    [2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
    [2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
    ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
    RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
    [2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
    [2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
    [2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
    [2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
    RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
    [2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
    [2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    [2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------

    My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
    [2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
    label 
    hostname DIAZSERVER
    port 3389
    loadbalanceinfo 
    ui.swapmousebutton false
    remote.program ||chrome
    remote.workingdirectory 
    remote.name Google Chrome
    remote.args 
    rail true
    soundmode 0
    connect_to_console false
    redirectsdcard true
    performance_flags 134
    arc.sessionid 0
    anonymous_username 
    authentication_level 2
    use_redirection_server_name false
    username Administrator
    gateway [
      host = DIAZSERVER
      port = 443
      bypass = false
    connect info[
      hostnames = [localhost]
      gatewayHost = DIAZSERVER
      gatewayPort = 443
      routingToken = Cookie: mstshash=Administrator
      redirectionGUID = 
      proxyHost = 
      proxyPort = 0
      sessionId = -1
    [2014-Jan-14 16:58:13] RDP (0): Not using any proxy
    [2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    AsioEndpointContext (0): startup(): starting up down context
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
    RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
    RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    [2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
    Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
    Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
    find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
    [2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
    label 
    hostname DIAZSERVER
    port 3389
    loadbalanceinfo 
    ui.swapmousebutton false
    remote.program ||chrome
    remote.workingdirectory 
    remote.name Google Chrome
    remote.args 
    rail true
    soundmode 0
    connect_to_console false
    redirectsdcard true
    performance_flags 134
    arc.sessionid 0
    anonymous_username 
    authentication_level 2
    use_redirection_server_name false
    username administrator
    gateway [
      host = DIAZSERVER
      port = 443
      bypass = false
    connect info[
      hostnames = [localhost]
      gatewayHost = DIAZSERVER
      gatewayPort = 443
      routingToken = Cookie: mstshash=administrator
      redirectionGUID = 
      proxyHost = 
      proxyPort = 0
      sessionId = -1
    [2014-Jan-14 17:09:27] RDP (0): Not using any proxy
    [2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    AsioEndpointContext (0): startup(): starting up down context
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
    RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
    RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    [2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
    I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be.

  • Error from labview 6.1 with the system windows 7

    I use Labview 6.1 vi to control a Tektronic oscilloscope and a BNC universal pulse generator via GPIB-USP connection. The vi worked very well with the system windows XP. The system was changed to Windows 7. Then one error message (Trigger signal is not recognized. Check the connection between 'Trigger out' and 'Aux in') comes whenever I start to run vi. The connection between 'Trigger out' and 'Aux in' works under mannual mode, so it is really ok.
    Could the compatibility between Labview 6.1 and windows 7 be the reason? If yes, are there tricks to use Labview 6.1 on windows 7?  Thanks. 
    Solved!
    Go to Solution.

    I do not know coding with Labview actually.....
    I set the pulse generator to mannual mode and send pulsing signal to scope. The signal was received well and displayed by the scope. It means the connection between 'Trigger out' and 'Aux in' is ok.
    The record of NI I/O interface is attached when the error message comes.
    Thanks.
    Attachments:
    Capture.txt ‏85 KB

  • Is there a problem with the Itunes Windows Installer Programme?

    The reason I ask is because I had a perfectly working Itunes programme on my external hard drive, from which I then deleted all the double ups of songs I had and then could not gain auto. updates of the dsongs I wished to add to itunes.
    It said to reinstall Itunes, which I tried to do and since this time the installation stops when installing the registry components and the following message appears -
    There is a problem with the Windows Installer Package. A programme required for this to install could not be run. Comntact your support personall or package provider.
    Can anyone help please?
    Thank you in advance for any help forwarded
    MrG
    P.S. - Not that well versed in computer speak, so laymans terms welcomed.

    This message often relates to a problem with Apple software update.
    Go to Add remove programs and find Apple Software update. Try repairing it.
    Select Change>>repair.
    That probably will not work
    Then try uninstalling any instance you find of Apple Software update. That probably will not work either.
    Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
    http://support.microsoft.com/kb/290301/
    To run the program – All Programs>>Windows Install Cleanup
    Remove any instance you find of Apple software update with the cleanup utility.
    Download a fresh copy of the iTunes installer and save it on your desktop.
    http://www.apple.com/itunes/download/
    Restart your computer and try installing iTunes.

  • Is there a problem with the itunes and quick time download pages or is it my internet.

    Is there a problem with the itunes and quicktime download pages or is it just my internet.

    Some more developments ... the issue appears to be browser-specific. I can't see the download controls at the moment in either IE 8 (I'll get your message) or Safari for Windows 5.0.5 (I'll just get the blank box). But I can see the download controls in Firefox 4 and Chrome (whatever version I have of that).
    So it might be worth installing Firefox and seeing if you can get the downloads via that:
    http://www.mozilla.com/en-US/firefox/new/

  • Problem with the Finder window in Chrome

    Hello,
    I have a problem with my finder window in Chrome.
    Since the window isn't a separate window anymore, but stuck to the top of the webpage, my finder window is too big. I can't read the "Cancel" or "Send" (I have no idea what's supposed to be there in English but I assume it's something like "send" and "cancel") buttons. I have provided some images of the problem, even if I make the Chrome window as small as possible, the finder window still is too big for my screen. I can resize the finder window from lest to right, but not up or down, which is extremely irritating for me.
    If anyone can help me how I can solve this problem.
    Thanks!

    I found the solution on another thread...Here it is.
    "I was having the same problem.  I found a way to make it smaller.  First, I opened chrome and clicked the green button on the window to make chrome go into full screen.  Then I tried to save a file to make the finder window open in chrome. When it opened in full screen I could see the bottom of the window so I resized it to make it a little smaller.  Once I did this it remembered the size so now I can access the bottom buttons when I take it out of full screen mode. Hope this helps."
    Worked like a charm!

  • Problem with the preview window in Premiere Elements 10

    Hi guys,
    I have a question:
    I have a new PC (data follow) and Adobe Premiere Elements 10.
    My problem is that I see in the preview-window only one grey picture. The sound runs without problems! In other chats I red, that perhaps my graphic card is the reson of my problam. Is this thus? If so, how I can repair this?
    PC:
    AMD FX-8350 Eight Core Processor 4 GHrz
    NVIDIA GeForce GTX 750 Ti
    Do you need even more?
    What I have already tried:
    - Adobe Premiere Elements 10 anew inst.
    - Graphics drivers update
    - Check DirectX
    - Windows Media Player and QuickTimePlayer anew Inst.
    Already to many thanks for your help!!!!!
    lg
    Börni

    borni123
    What computer operating system is your Premiere Elements 10 to run on?
    You are involved in the Premiere Elements 10/NVIDIA GeForce issue whose full details (description and fix) are included
    in the Announcement at the top of this forum. Copy for your convenience below.
    You gave a lot of details but did not include the computer operating system. This information may be the key whether
    the known fix will work for you. The known fix requires roll back of the driver version to about May 2013. If your computer
    is Windows 8 or 8.1 64 bit, there may not be a driver old enough to resolve the issue. This may force you consider
    a Premiere Elements version other than 10 or a different video card/graphics card for your computer. This issue is
    specific for Premiere Elements 10 and the NVIDIA GeForce cards.
    Copy of Announcement at top of this forum....
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this
    applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary
    to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working
    Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is
    expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver
    roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    The following is the specific link in the above for determining what older NVIDIA GeForce GTX750Ti driver versions are
    available to you.
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    Please update us on your progress,
    Thank you.
    ATR

  • Problems with the latest Windows 7 Conexant HD Audio Drivers For WIndows 7

    Hi,
    I have a Toshiba Satellite P305-S8997E with the Conexant High Definition SmartAudio 211 speakers. I have recently upgraded with the Windows 7 32/64-bit audio drivers posted within the last week in the Drivers section, and have had a few problems with them. Namely that whenever I listen to music (and etc), the volume is fairly low, and even when the speaker AND media player (Foobar, FYI) volumes are cranked, they flucuate, and eventually end up being much lower than they should. Is there any fix to this? I recently downgraded to the last Vista 64-bit drivers for them and that has ended the volume problem, but it doesn't sound as good as it should to my ears. Any help is appreciated.
    Also, this computer is only about two months old, and this problem hasn't surfaced until very lately, so I doubt it's something like the speakers going out or anything.

    Windows 7 is still a PRE-RELEASE OS until the OFFICIAL release date of October 22nd.  Toshiba and other manufacturers are still working on their drivers and may not have fully functioning drivers until then.  My advice is be patient and wait for them to get all of the bugs out.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Problems with the system decimal point with german regional settings

    I have a Labview 6 app that needs deploying to Germany.
    My app sends strings over VISA RS232 and GPIB instruments with floating point numbers.
    When changing from English to German regional settings, in Windows XP, periods are now interpreted as commas and the app starts truncating my decimal numbers. So in the English Regional Setting when I send 1.234 I get 1.234 but in the German Regional Settings when I send 1.234 I get 1.000.
    I have turned off the "Use localized decimal point" in Tools - Options - Front Panel as well as set any function (Frac/Exp String to Number) that has a "Use System Decimal Point" connector to FALSE.
    Now here's my problem....
    This fixed the issue I was having as long as I am in the development environment, however, once I build the application I still get the truncated numbers. Example: I send 1.234 to an instrument and it sees 1.000.
    Again this works fine in the development enviroment, sending 1.234 reads 1.234 with German regional settings.
    Any help is appreciated.
    Adam

    You can use a simple function of the "Scan from string" function.
    Place "%.;" (Without the quotes) in the scanning string, and this will tell LV to use a decimal point for interpretation. If you place "%,;", this will tell it to use a comma.
    You can place this at the beginning of your format string, and it simply tells the parser how to work, it doesn't otherwise produce an output.
    Using simply "%;" sets the seperator to the system default (maybe the best idea after the code has been run as the changed decimal point character apparently remains changed otherwise). From the LV help
    The following codes control the decimal separator used for numeric output. These codes do not cause any input or output to occur. They change the decimal separator for all further inputs/outputs until the next %; is found.
    %,; comma decimal separator
    %.; period decimal separator
    %; system default separator
    Hope this helps
    Shane.
    Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

  • Fixing problems with the Microsoft Windows Installer Cleanup Utility

    Sorry for the long subject. I am having what appear to be common problems with my acrobat reader for which the only solution appears to be using the microsoft windows installer cleanup thing.
    I have acheived downloading the utility to my desktop but when I try to run it I get an error message as follows:
    Across the top of the message it says 'WINDOWS SCRIPT HOST' and in the box it says:
    Script: C:\DOCUMEN~1\Karen\LOCAL~1\Temp\IXP000.TMP\StartMsi.vbs
    Line: 1
    Char: 1
    Error: The specified module could not be found
    Code: 800700E
    Source: (Null)
    Does anyone have any clues as to where I can go from here as I am stuck with a program I can neither use or uninstall, and a reascue plan that doesn't want to cooperate either. And please treat me like a 2 yr old with the technical stuff. Thanks. :-)
    Karen

    Can you try to download it again, perhaps to the C:\ drive rather than the Desktop? Delete the Desktop download, then open Windows Explorer, and run the installer from the C:\ drive.
    P.S. do you have administrative privileges on your system?

  • Problem with the Titler WIndow

    Hello,
    I don't know how it happened but the titler window is saparate in 2 windows : one with the title by it self and the other one with tools and buttons.
    How is it possible to have only one window again ?
    Thank you for your help and regards,
    Daniel

    Daniel,
    Though I would expect it to be in Eddie's link, you only need to go to Window (in the Toolbar at the top of the GUI), choose Workspaces, and then choose one of the default Workspaces listed, or any Custom Workspaces that you might have created. Hint: once you get a Workspace set up the way you like it, do save it as a Custom Workspace. Can save a lot of time later. I have about a dozen, plus the ones that ship/install with PrPro and use them for different tasks.
    Good luck,
    Hunt

  • Does anyone have a problem with the code window not showing code?

    I am having a problem with this update where the code window is blank and where I cannot add anything/ The text does appears in the design or live window.
    I just use DW to format text that will go into Edge Animate.

    Hi,
    Are you getting this issue on all the files?
    Please share any screenshot.
    Regards,
    Devendra

  • Problem with the home window

    hello,
     can you please help with the connection problem I am facing in my skype account. I am able to log in the account, but I am not able to interact with anyone due to my offline status in other's account. Moreover, there comes a error of "skype home unavailable". Also, I cant see other people present online.
    I have already checked in the options of staying online and staying connected. Everything is working. But still I am not able to detect the problem. Please help me.

    Is your connection status on Skype Online? The status icon must be solid green with a white checkmark inside. Try to change the status using the dropdown arrow next to this icon.

Maybe you are looking for

  • How do I get project downloaded to 2nd user's PC?

    I'm testing RH6 with RoboSource Control 3. Was able to covert existing project and get it up onto server as single user. Checking in out as single user is fine. Now, I want to test how it works with 2nd user. When 2nd user tries to get project off th

  • Decimal places for condition type .

    Dear sir, I have a condition type like JCV1,ZADC  & same are included in purchase order.These are the  manual  condition type. I  have created a purchase order & on condition tab page in once i enter 10 % for jcv1 condtion type ,system is showing tha

  • Error message: the resource type must not be null.

    Hi, I have working on Integrating Oracle E-Business Suite Release 12 with Oracle Access Manager 11gR1 PS2 (11.1.1.7.0) using Oracle E-Business Suite AccessGate. I am getting this error when I am Register the WebGate Agent with Oracle Access Manager.

  • DNS forward lookups failing

    My system is the only DC and running Server 2012 R2 and is the only DNS server on a small network. There are 2 forwarders for internet name resolution and the root domains are also configured...all resolve without issue. Repeated simple & recursive t

  • Ix4-300D as iSCSI target cause alert disk is full

    I am using ix4-300D with RAID5 as iSCSI target. Once I create largest volume using all capacity, ix4-300D sends warning disk is full.  Because we monitor this iSCSI target using E-mail alert, I want to eliminate this warning message.  There is no con